Measurement of Refractive Index, Specific Heat Capacity, and Thermal Conductivity for Ag6.0In4.5Sb60.8Te28.7at High Temperature

2009 ◽  
Vol 48 (5) ◽  
pp. 05EC02 ◽  
Author(s):  
Masashi Kuwahara ◽  
Osamu Suzuki ◽  
Kouichi Tsutsumi ◽  
Takashi Yagi ◽  
Naoyuki Taketoshi ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Refractive Index ◽  
High Temperature ◽  
Specific Heat ◽  
Specific Heat Capacity

scholarly journals Characterization of AlN-based Ceramic Composites for Use as Millimeter Wave Susceptor Materials at High Temperature: High Temperature Thermal Properties of AlN:Mo with 0.25% to 4.0% Mo by Volume

MRS Advances ◽  
2019 ◽  
Vol 4 (27) ◽  
pp. 1531-1542 ◽  
Author(s):  
Brad W. Hoff ◽  
Frederick W. Dynys ◽  
Steven C. Hayden ◽  
Rachael O. Grudt ◽  
Martin S. Hilario ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
High Temperature ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Elevated Temperatures ◽  
Ceramic Composites ◽  
Dsc Measurements ◽  
Mo Content

ABSTRACTIn order to begin to evaluate and model the suitability of high temperature ceramic composites, such as AlN:Mo, as susceptor materials for power beaming applications, the electromagnetic, thermal, and mechanical properties of the material must be known at elevated temperatures. Work reported here focuses on the development of thermal property datasets for AlN:Mo composites ranging from 0.25% to 4.0% Mo by volume. To calculate thermal conductivity of the AlN:Mo composite series, specific heat capacity, thermal diffusivity, and density data were acquired. The calculated specific heat capacity, Cp, of the set of AlN:Mo composites was, on average, found to be approximately 803 J/kgK at 100 °C and to increase to approximately 1133 J/kgK at 1000 °C, with all values to be within +/- 32 J/kgK of the average at a given temperature. These calculated specific heat capacity values matched values derived from DSC measurements to within the expected error of the measurements. Measured thermal diffusivity, α, of the set of AlN:Mo composites was, on average, found to be approximately 3.93 x 10-1 cm2/s at 100 °C and to increase to approximately 9.80 x 10-2 cm2/s at 1000 °C, with all values within +/- 1.84 x 10-2 cm2/s of the average at a given temperature. Thermal conductivity, k, for the set of AlN:Mo composites was found to be approximately 108 W/mK at 100 °C and to decrease to approximately 38 W/mK at 1000 °C, with all values within +/- 5.3 W/mK of the average at a given temperature. Data trends show that increasing Mo content correlates to lower values of of Cp, α, and k at a given temperature.

Thermophysical Properties of Steam–Air Under High Temperature and High Pressure

2019 ◽  
Vol 142 (4) ◽  
Author(s):  
Zhengbin Wu ◽  
Shu Jiang ◽  
Lei Wang ◽  
Yiguo Zhang
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
High Pressure ◽  
High Temperature ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Heavy Oil ◽  
Thermophysical Properties ◽  
Steam Injection ◽  
Steam System

Abstract Air-assisted steam injection is a new technique for heavy oil reservoir exploitation. This paper focused on the thermophysical properties of the air/steam system, such as density, viscosity, specific heat capacity, enthalpy, and thermal conductivity coefficient, and these have been calculated using the Redlich–Kwong equation of state (RK EOS). The viscosity of the air/steam system under high temperature and high pressure was calculated with the corresponding state principle and rectified with the Dean–Stiel residual viscosity method. The results showed that compared with the saturated steam of the same mass, the viscosity, specific heat capacity, thermal conductivity, and enthalpy of the air/steam mixture decreased, while the specific volume increased, which indicated that the addition of air to steam weakened the thermal effect of the steam and makes use of the heat insulation and thermal expansion of air. This study can provide guidance for parameter design of air-assisted steam injection for heavy oil recovery.

scholarly journals Influence of alkaline modification on selected properties of banana fiber paperbricks

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Abayomi A. Akinwande ◽  
Adeolu A. Adediran ◽  
Oluwatosin A. Balogun ◽  
Oluwaseyi S. Olusoju ◽  
Olanrewaju S. Adesina
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Moisture Absorption ◽  
Water Volume ◽  
Banana Fiber ◽  
Fiber Loading ◽  
Banana Fibers ◽  
Alkaline Modification

AbstractIn a bid to develop paper bricks as alternative masonry units, unmodified banana fibers (UMBF) and alkaline (1 Molar aqueous sodium hydroxide) modified banana fibers (AMBF), fine sand, and ordinary Portland cement were blended with waste paper pulp. The fibers were introduced in varying proportions of 0, 0.5, 1.0 1.5, 2.0, and 2.5 wt% (by weight of the pulp) and curing was done for 28 and 56 days. Properties such as water and moisture absorption, compressive, flexural, and splitting tensile strengths, thermal conductivity, and specific heat capacity were appraised. The outcome of the examinations carried out revealed that water absorption rose with fiber loading while AMBF reinforced samples absorbed lesser water volume than UMBF reinforced samples; a feat occasioned by alkaline treatment of banana fiber. Moisture absorption increased with paper bricks doped with UMBF, while in the case of AMBF-paper bricks, property value was noted to depreciate with increment in AMBF proportion. Fiber loading resulted in improvement of compressive, flexural, and splitting tensile strengths and it was noted that AMBF reinforced samples performed better. The result of the thermal test showed that incorporation of UMBF led to depreciation in thermal conductivity while AMBF infusion in the bricks initiated increment in value. Opposite behaviour was observed for specific heat capacity as UMBF enhanced heat capacity while AMBF led to depreciation. Experimental trend analysis carried out indicates that curing length and alkaline modification of fiber were effective in maximizing the properties of paperbricks for masonry construction.

The Key Factors of Low-Frequency Electric Heating Assisted Depressurization Method in the Exploiting of Methane Hydrate Sediments

2021 ◽  
Author(s):  
Ermeng Zhao ◽  
Jian Hou ◽  
Yunkai Ji ◽  
Lu Liu ◽  
Yongge Liu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Low Frequency ◽  
Electric Heating ◽  
Gas Production ◽  
Hydrate Decomposition ◽  
Hydrate Saturation ◽  
Production Behavior

Abstract Natural gas hydrate is widely distributed in the permafrost and marine deposits, and is regarded as an energy resource with great potential. The low-frequency electric heating assisted depressurization (LF-EHAD) has been proven to be an efficient method for exploiting hydrate sediments, which involves complex multi-physics processes, i.e. current conduction, multiphase flow, chemical reaction and heat transfer. The physical properties vary greatly in different hydrate sediments, which may profoundly affect the hydrate decomposition in the LF-EHAD process. In order to evaluate the influence of hydrate-bearing sediment properties on the gas production behavior and energy utilization efficiency of the LF-EHAD method, a geological model was first established based on the data of hydrate sediments in the Shenhu Area. Then, the influence of permeability, porosity, thermal conductivity, specific heat capacity, hydrate saturation and hydrate-bearing layer (HBL) thickness on gas production behavior is comprehensively analyzed by numerical simulation method. Finally, the energy efficiency ratio under different sediment properties is compared. Results indicate that higher gas production is obtained in the high-permeability hydrate sediments during depressurization. However, after the electric heating is implemented, the gas production first increases and then tends to be insensitive as the permeability decreases. With the increasing of porosity, the gas production during depressurization decreases due to the low effective permeability; while in the electric heating stage, this effect is reversed. High thermal conductivity is beneficial to enhance the heat conduction, thus promoting the hydrate decomposition. During depressurization, the gas production is enhanced with the increase of specific heat capacity. However, more heat is consumed to increase the reservoir temperature during electric heating, thereby reducing the gas production. High hydrate saturation is not conducive to depressurization because of the low effective permeability. After electric heating, the gas production increases significantly. High HBL thickness results in a higher gas production during depressurization, while in the electric heating stage, the gas production first increases and then remains unchanged with the increase of thickness, due to the limited heat supply. The comparison results of energy efficiency suggest that electric heating is more advantageous for hydrate sediments with low permeability, high porosity, high thermal conductivity, low specific heat capacity, high hydrate saturation and high HBL thickness. The findings in this work can provide a useful reference for evaluating the application of the LF-EHAD method in gas hydrate sediments.

Determination of the Thermal Properties of a PCB by Coupled Numerical and Experimental Approach

2020 ◽  
Author(s):  
Yener Usul ◽  
Mustafa Özçatalbaş
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Numerical Analysis ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Thermal Analyses ◽  
Analysis Model ◽  
Linear Temperature ◽  
Coefficient Of Thermal Conductivity

Abstract Increasing demand for usage of electronics intensely in narrow enclosures necessitates accurate thermal analyses to be performed. Conduction based FEM (Finite Element Method) is a common and practical way to examine the thermal behavior of an electronic system. First step to perform a numerical analysis for any system is to set up the correct analysis model. In this paper, a method for obtaining the coefficient of thermal conductivity and specific heat capacity of a PCB which has generally a complex composite layup structure composed of conductive layers, and dielectric layers. In the study, above mentioned properties are obtained performing a simple nondestructive experiment and a numerical analysis. In the method, a small portion of PCB is sandwiched from one side at certain pressure by jaws. A couple of linear temperature profiles are applied to the jaws successively. Unknown values are tuned in the analysis model until the results of FEM analysis and experiment match. The values for the coefficient of thermal conductivity and specific heat capacity which the experiment and numerical analysis results match can be said to be the actual values. From this point on, the PCB whose thermal properties are determined can be analyzed numerically for any desired geometry and boundary condition.

scholarly journals Comparative study of thermal transport in Zea mays straw and Zea mays heartwood (cork) boards

2010 ◽  
Vol 14 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Sunday Etuk ◽  
Louis Akpabio ◽  
Ita Akpan
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Zea Mays ◽  
Thermal Diffusivity ◽  
Comparative Study ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Thermal Transport ◽  
Insulation Material ◽  
Thermal Absorptivity

Thermal conductivity values at the temperature of 301-303K have been measured for Zea mays straw board as well as Zea mays heartwood (cork) board. Comparative study of the thermal conductivity values of the boards reveal that Zea mays heartwood board has a lower thermal conductivity value to that of the straw board. The study also shows that the straw board is denser than the heartwood board. Specific heat capacity value is less in value for the heartwood board than the straw board. These parameters also affect the thermal diffusivity as well as thermal absorptivity values for the two types of boards. The result favours the two boards as thermal insulators for thermal envelop but with heartwood board as a preferred insulation material than the straw board.

Sign in / Sign up

Export Citation Format

Share Document