In Situ High Temperature X-Ray Diffraction Studies of Modified Poly(Ethylene Terephthalate)

1992 ◽  
Vol 36 ◽  
pp. 379-386
Author(s):  
T. Blanton ◽  
R. Seyler
Keyword(s):  
High Temperature ◽  
Ethylene Terephthalate ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Pet Crystallization

The effect of dimethyl-5-sodiosulfoisophthalate, SIP, on poly(ethylene terephthalate), PET, crystallization has been studied using in situ high-temperature x-ray diffraction, HTXRD. At low levels of SIP modification, PET-like crystallinity was observed. At high SIP levels, clustering of polyester ionomers was observed and crystallization was significantly suppressed. The HTXRD data along with differential scanning calorimetry, DSC, and small angle x-ray scattering, SAXS, indicate that the change from bulk crystallization to bulk ionomer formation occurred when 8-12 mol% of the diester linkages contained SIP.

scholarly journals The effect of attapulgite on crystallization behavior of Poly(ethylene terephthalate) (PET)/Attapulgite (AT) nano composites

e-Polymers ◽  
2007 ◽  
Vol 7 (1) ◽  
Author(s):  
Fan Xufen ◽  
Chen Dajun
Keyword(s):  
Ethylene Terephthalate ◽  
In Situ Polymerization ◽  
Nucleating Agent ◽  
Avrami Equation ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

AbstractPoly (ethylene terephthalate) (PET)/Attapulgite (AT) nanocomposites were prepared via in-situ polymerization. According to the observation of transmission electron microscopy (TEM), attapulgite is well dispersed in the PET matrix in a nanometer scale. The influence of attapulgite content on the nonisothermal crystallization kinetics was studied using a classical Avrami equation with Jeziorny method. The crystalline structures of the pure PET and PET/AT nanocomposites with different amount of AT (0.2%, 0.5%, 1%, 2%) were characterized by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) methods. It was found that the crystallization temperature for PET/AT nanocomposites with 0.2% and 0.5% content of AT were higher than pure PET and the rate of crystallization of all PET/AT nanocomposite samples increased significantly which indicated that attapulgite could be used as an effective nucleating agent in PET. However, with the addition of AT, smaller crystalline size, more crystalline defects and lower degree of crystallization was demonstrated.

scholarly journals Role of Surfactants in the Properties of Poly(Ethylene Terephthalate)/Purified Clay Nanocomposites

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1397 ◽  
Author(s):  
Elaine dos Santos ◽  
Marcus Fook ◽  
Oscar Malta ◽  
Suédina de Lima Silva ◽  
Itamara Leite
Keyword(s):  
Clay Nanocomposites ◽  
Phosphonium Salts ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Alkyl Ammonium ◽  
Pet Crystallization

Purified clay was modified with different amounts of alkyl ammonium and phosphonium salts and used as filler in the preparation of PET nanocomposites via melt intercalation. The effect of this type of filler on morphology and thermal and mechanical properties of PET nanocomposites was investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analyses (TG), tensile properties, and transmission electron microscopy (TEM). The results showed that the mixture of alkyl ammonium and phosphonium salts favored the production of PET nanocomposites with intercalated and partially exfoliated morphologies with slight improvement in thermal stability. In addition, the incorporation of these organoclays tended to inhibit PET crystallization behavior, which is profitable in the production of transparent bottles.

Sign in / Sign up

Export Citation Format

Share Document