scholarly journals Nanosized TiO2Photocatalyst Powder via Sol-Gel Method: Effect of Hydrolysis Degree on Powder Properties

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Nor Hafizah ◽  
Iis Sopyan
Keyword(s):  
Crystal Structure ◽  
Surface Area ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Gel Method ◽  
Sol Gel Method ◽  
Hydrolysis Degree ◽  
Method Effect ◽  
Powder Properties ◽  
Dta Curves

NanosizedTiO2powder was synthesized via sol-gel method using titanium tetraisopoxide (TPT) as the precursor. Mol ratios of water to TPT were varied from 1 (Powder A), 2 (Powder B), 3 (Powder C), and 4 (Powder D) to evaluate effect of hydrolysis degree. TG/DTA curves showed that amorphous phase turned to anatase crystal structure at ca. 415, 337, 310, and339∘C for Powders A, B, C, and D, respectively. XRD analysis showed that all the synthesizedTiO2powders were 100% in anatase form with Powders B and C showing considerably higher crystallinities. The powders obtained at lower water to TPT mol ratios were spherical in shape and they became bar-like shapes higher mol ratios. The lower hydrolysis degree led to higher surface area of the Powder A (24.8 m2/g) compared to Powder B (14.6 m2/g). From phenol photocatalytic measurement, Powder B was the most efficient attributed to its higher crystallinity.

The Preparation of BaTi4O9 by Sol-Gel Method

2016 ◽  
Vol 852 ◽  
pp. 272-277 ◽  
Author(s):  
Zhao Rong Wei ◽  
Chao Yang Shi ◽  
Bin Shen ◽  
Ming Fan ◽  
Cheng Wang
Keyword(s):  
Thermal Analysis ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Tem Analysis ◽  
Gel Method ◽  
Sol Gel Method ◽  
Different Temperatures

To promote the application of BaTi4O9 in higher-end fields, BaTi4O9 precursor has been prepared with sol-gel method (SGM. The objective products have been obtained at different temperatures and SSR-BaTi4O9 samples has been prepared for compare experiments. The studies of thermal analysis, XRD analysis, TEM analysis, specific surface area analysis, DRS analysis and FS analysis show: the crystalline of the product obtained by SGM is more purity than the product obtained by SSR; The SGM600 sample is amorphous, which can be used as an optical catalyst because of the maximum specific surface area; The SGM1000 sample is the most pure, uniform and complete in crystal.

Synthesis and structural characteristics of high surface area TiO2 aerogels by ultrasonic-assisted sol–gel method

2018 ◽  
Vol 29 (7) ◽  
pp. 075702 ◽  
Author(s):  
Feng Qingge ◽  
Cai Huidong ◽  
Lin Haiying ◽  
Qin Siying ◽  
Liu Zheng ◽  
...  
Keyword(s):  
Surface Area ◽  
Structural Characteristics ◽  
High Surface ◽  
Sol Gel ◽  
High Surface Area ◽  
Gel Method ◽  
Sol Gel Method ◽  
Ultrasonic Assisted

Synthesis, crystal structure and photoluminescence properties of Eu2+-activated RbCaGd(PO4)2 phosphors

RSC Advances ◽  
2016 ◽  
Vol 6 (14) ◽  
pp. 11211-11217 ◽  
Author(s):  
Xue Chen ◽  
Qidi Wang ◽  
Fengzhu Lv ◽  
Paul K. Chu ◽  
Yihe Zhang
Keyword(s):  
Crystal Structure ◽  
Sol Gel ◽  
Dipole Interaction ◽  
Concentration Quenching ◽  
Photoluminescence Properties ◽  
Gel Method ◽  
Sol Gel Method ◽  
First Time

RbCaGd(PO4)2:Eu2+ was prepared by the Pechini-type sol–gel method. The crystal structure was determined in the first time. The dipole–dipole interaction plays a major role in the mechanism of concentration quenching of Eu2+ in this phosphor.

Fabrication and Characteristics of Methyl-Modified TiO2-SiO2 Membrane by Sol-Gel Method: Effect of Titania Content

2021 ◽  
Vol 219 (1) ◽  
pp. 233-246
Author(s):  
Jing Yang ◽  
Gaofei Zhang ◽  
Ruifeng Zhang ◽  
Yingming Guo ◽  
Bo Li
Keyword(s):  
Sol Gel ◽  
Gel Method ◽  
Sol Gel Method ◽  
Titania Content ◽  
Method Effect

scholarly journals Synthesis of Spherical Silica by Sol-Gel Method and Its Application as Catalyst Support

2011 ◽  
Vol 10 (2) ◽  
pp. 25
Author(s):  
Anirut Leksomboon ◽  
Bunjerd Jongsomjit
Keyword(s):  
Particle Size ◽  
Ethylene Glycol ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Sol Gel ◽  
Weight Ratio ◽  
Gel Method ◽  
Sol Gel Method ◽  
Spherical Silica

In this present study, the spherical silica support was synthesized from tetraethyloxysilane (TEOS), water, sodium hydroxide, ethylene glycol and n-dodecyltrimethyl ammonium bromide (C12TMABr). The particle size was controlled by variation of the ethylene glycol co-solvent weight ratio of a sol-gel method preparation in the range of 0.10 to 0.50. In addition, the particle size apparently increases with high weight ratio of co-solvent, but the particle size distribution was broader. The standard deviation of particle diameter is large when the co-solvent weight ratio is more than 0.35 and less than 0.15. However, the specific surface area was similar for all weight ratios ranging from 1000 to 1300 m2/g. The synthesized silica was spherical and has high specific surface area. The cobalt was impregnated onto the obtained silica to produce the cobalt catalyst used for CO2 hydrogenation.</

Iron-Zircon Pigments Prepared by Non-Hydrolytic Sol-Gel Method at Low Temperature

2011 ◽  
Vol 412 ◽  
pp. 223-226 ◽  
Author(s):  
Wei Hui Jiang ◽  
Yan Hui Yang ◽  
Qing Xia Zhu ◽  
Jian Min Liu
Keyword(s):  
Crystal Structure ◽  
Low Temperature ◽  
Ferric Chloride ◽  
Lithium Fluoride ◽  
Sol Gel ◽  
Zircon Crystal ◽  
Molar Ratio ◽  
Gel Method ◽  
Sol Gel Method ◽  
Anhydrous Ferric Chloride

ron-zircon pigment has been synthesized by non-hydrolytic sol-gel method using zirconium chloride and tetraethoxysilane as precursors, anhydrous ferric chloride as colorant, lithium fluoride as mineralizer and anhydrous ethanol as solvent. Iron-zircon pigment has been characterized by means of DTA-TG, XRD, Colorimeter and TEM. The results show that only a small fraction of iron is incorporated in the zircon crystal structure while the remaining iron cations are trapped within the zircon matrix. The iron-zircon with the red value (a*) of 20.64 can be synthesized at 700°C with the optimum Fe/Zr molar ratio of 0.2.

Effect of Cobalt Content on the Structural Properties of Zirconia Prepared by Sol-Gel Method

2020 ◽  
Vol 1000 ◽  
pp. 227-232
Author(s):  
Nurhayati Indah Ciptasari ◽  
Adri Nora ◽  
Lutviasari Nuraini ◽  
Lusiana ◽  
Nono Darsono ◽  
...  
Keyword(s):  
Structural Properties ◽  
Sol Gel ◽  
Cobalt Content ◽  
Secondary Phase ◽  
Xrd Analysis ◽  
Weight Percent ◽  
Sem Images ◽  
Monoclinic Crystal ◽  
Gel Method ◽  
Sol Gel Method

Zirconia (ZrO2) powders doped with cobalt were prepared by sol-gel method using inorganic salt of zirconium (IV) chloride (ZrCl4) as precursor. The amount of cobalt was varied in the range of 4–16% weight percent to study the effect to structural properties. X-ray diffraction (XRD) analysis suggested the resulting phases were zirconium oxide (Baddeleyite) with monoclinic crystal system along with cobalt oxide as secondary phase. The increasing cobalt content caused the XRD peaks to shift into lower angle due to substitution of Zr atom to smaller Co atom in crystal lattice. Scanning electron microscope (SEM) images showed the samples with higher Co content had smoother surface. Generally, the microstructures of Co doped zirconia powders consisted of large agglomerates with small particles on the surface.

Sign in / Sign up

Export Citation Format

Share Document