scholarly journals Energy Efficiency Maximization through Cooperative Transmit and Receive Antenna Selection for Multicell MU-MIMO System

2013 ◽  
Vol 2013 ◽  
pp. 1-11
Author(s):  
Yanjie Dong ◽  
Yinghai Zhang ◽  
Weidong Wang ◽  
Gaofeng Cui ◽  
Yang Yu
Keyword(s):  
Energy Efficiency ◽  
Large Scale ◽  
Optimization Problem ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
System Optimization ◽  
Selection Scheme ◽  
Active Antennas ◽  
Input Multiple Output

The capacity of Multiple Input Multiple Output (MIMO) system is highly related to the number of active antennas. But as the active antenna number increases, the MIMO system will consume more energy. To maximize the energy efficiency of MIMO system, we propose an antenna selection scheme which can maximize the energy efficiency of BS cluster. In the scheme, ergodic energy efficiency is derived according to large scale channel state information (CSI). Based on this ergodic energy efficiency, we introduce a cost function varied with the number of antennas, in which the effect to the energy efficiency of both the serving BS and the neighbor BS is considered. With this function, we can transform the whole system optimization problem to a sectional optimization problem and obtain a suboptimal antenna set using a heuristic algorithm. Simulation results verify that the proposed approach performs better than the comparison schemes in terms of network energy efficiency and achieves 98% network energy efficiency of the centralized antenna selection scheme. Besides, since the proposed scheme does not need the complete CSI of the neighbor BS, it can effectively reduce the signaling overhead.

A Comparison of Norm Based Antenna Selection and Random Antenna Selection with Regard to Energy Efficiency in Wireless System with Large Number of Users

2020 ◽  
Vol 10 (2) ◽  
pp. 189-196
Author(s):  
Ashu Taneja ◽  
Nitin Saluja
Keyword(s):  
Energy Efficiency ◽  
Mimo Systems ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Transmit Antenna Selection ◽  
Wireless System ◽  
Multiple Input ◽  
Input Multiple Output

Background: The paper considers the wireless system with large number of users (more than 50 users) and each user is assigned large number of antennas (around 200) at the Base Station (BS). Objective: The challenges associated with the defined system are increased power consumption and high complexity of associated circuitry. The antenna selection is introduced to combat these problems while the usage of linear precoding reduces computational complexity. The literature suggests number of antenna selection techniques based on statistical properties of signal. However, each antenna selection technique suits well to specific number of users. Methods: In this paper, the random antenna selection is compared with norm-based antenna selection. It is analysed that the random antenna selection leads to inefficient spectral efficiency if the number of users are more than 50 in Multi-User Multiple-Input Multiple Output (MU-MIMO) system. Results: The paper proposes the optimization of Energy-Efficiency (EE) with random transmit antenna selection for large number of users in MU-MIMO systems. Conclusion: Also the computation leads to optimization of number of transmit antennas at the BS for energy efficiency. The proposed algorithm results in improvement of the energy efficiency by 27% for more than 50 users.

scholarly journals Low-Complexity Transmit Antenna Selection in Large-Scale Spatial Modulation Systems

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Peng Wei ◽  
Lu Yin ◽  
Yue Xiao ◽  
Xu He ◽  
Shaoqian Li
Keyword(s):  
Computational Complexity ◽  
System Performance ◽  
Large Scale ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Spatial Modulation ◽  
Transmit Antenna Selection ◽  
Input Multiple Output

Transmit antenna selection (TAS) is an efficient way for improving the system performance of spatial modulation (SM) systems. However, in the case of large-scale multiple-input multiple-output (MIMO) configuration, the computational complexity of TAS in large-scale SM will be extremely high, which prohibits the application of TAS-SM in a real large-scale MIMO system for future 5G wireless communications. For solving this problem, in this paper, two novel low-complexity TAS schemes, named as norm-angle guided subset division (NAG-SD) and threshold-based NAG-SD ones, are proposed to offer a better tradeoff between computational complexity and system performance. Simulation results show that the proposed schemes can achieve better performance than traditional TAS schemes, while effectively reducing the computational complexity in large-scale spatial modulation systems.

scholarly journals Energy and Information Beamforming in Airborne Massive MIMO System for Wireless Powered Communications

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3540 ◽  
Author(s):  
Yurong Wang ◽  
Aijun Liu ◽  
Kui Xu ◽  
Xiaochen Xia
Keyword(s):  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Hardware Complexity ◽  
Mimo Channels ◽  
Channel State ◽  
Active Antennas ◽  
Large Numbers ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Critical Problems

Energy supply and information backhaul are critical problems for wireless sensor networks deployed in remote places with poor infrastructure. To deal with these problems, this paper proposes an airborne massive multiple-input multiple-output (MIMO) system for wireless energy transfer (WET) and information transmission. An air platform (AP) equipped with a two-dimensional rectangular antenna array is employed to broadcast energy and provide wireless access for ground sensors. By exploiting the statistical property of air-terrestrial MIMO channels, the energy and information beamformers are jointly designed to maximize the average received signal-to-interference-plus-noise ratio (SINR), which gives rise to a statistical max-SINR beamforming scheme. The scheme does not rely on the instantaneous channel state information, but still requires large numbers of RF chains at AP. To deal with this problem, a heuristic strongest-path energy and information beamforming scheme is proposed, which can be implemented in the analog-domain with low computational and hardware complexity. The analysis of the relation between the two schemes reveals that, with proper sensor scheduling, the strongest-path beamforming is equivalent to the statistical max-SINR beamforming when the number of AP antennas tends to infinity. Using the asymptotic approximation of average received SINR at AP, the system parameters, including transmit power, number of active antennas of AP and duration of WET phase, are optimized jointly to maximize the system energy efficiency. The simulation results demonstrate that the proposed schemes achieve a good tradeoff between system performance and complexity.

scholarly journals Diversity and Multiplexing Technologies by 3D Beams in Polarized Massive MIMO Systems

2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Xin Su ◽  
KyungHi Chang
Keyword(s):  
Mobile Communications ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Scale Up ◽  
Beam Width ◽  
System Architectures ◽  
Selection Scheme ◽  
Input Multiple Output ◽  
3D Beamforming

Massive multiple input, multiple output (M-MIMO) technologies have been proposed to scale up data rates reaching gigabits per second in the forthcoming 5G mobile communications systems. However, one of crucial constraints is a dimension in space to implement the M-MIMO. To cope with the space constraint and to utilize more flexibility in 3D beamforming (3D-BF), we propose antenna polarization in M-MIMO systems. In this paper, we design a polarized M-MIMO (PM-MIMO) system associated with 3D-BF applications, where the system architectures for diversity and multiplexing technologies achieved by polarized 3D beams are provided. Different from the conventional 3D-BF achieved by planar M-MIMO technology to control the downtilted beam in a vertical domain, the proposed PM-MIMO realizes 3D-BF via the linear combination of polarized beams. In addition, an effective array selection scheme is proposed to optimize the beam-width and to enhance system performance by the exploration of diversity and multiplexing gains; and a blind channel estimation (BCE) approach is also proposed to avoid pilot contamination in PM-MIMO. Based on the Long Term Evolution-Advanced (LTE-A) specification, the simulation results finally confirm the validity of our proposals.

scholarly journals Deep Learning Based Antenna Selection for MIMO SDR System

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6987
Author(s):  
Shida Zhong ◽  
Haogang Feng ◽  
Peichang Zhang ◽  
Jiajun Xu ◽  
Huancong Luo ◽  
...  
Keyword(s):  
Decision Making ◽  
Deep Learning ◽  
Software Defined Radio ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Input Multiple Output ◽  
Set Up ◽  
Time Division

In this paper, we propose and implement a novel framework of deep learning based antenna selection (DLBAS)-aided multiple-input–multiple-output (MIMO) software defined radio (SDR) system. The system is constructed with the following three steps: (1) a MIMO SDR communication platform is first constructed, which is capable of achieving uplink communication from users to the base station via time division duplex (TDD); (2) we use the deep neural network (DNN) from our previous work to construct a deep learning decision server to assist the MIMO SDR platform for making intelligent decision for antenna selection, which transforms the optimization-driven decision making method into a data-driven decision making method; and (3) we set up the deep learning decision server as a multithreading server to improve the resource utilization ratio. To evaluate the performance of the DLBAS-aided MIMO SDR system, a norm-based antenna selection (NBAS) scheme is selected for comparison. The results show that the proposed DLBAS scheme performed equally to the NBAS scheme in real-time and out-performed the MIMO system without AS with up to 53% improvement on average channel capacity gain.

scholarly journals User Oriented Transmit Antenna Selection in Massive Multi-User MIMO SDR Systems

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4867 ◽  
Author(s):  
Shida Zhong ◽  
Haogang Feng ◽  
Peichang Zhang ◽  
Jiajun Xu ◽  
Lei Huang ◽  
...  
Keyword(s):  
Software Defined Radio ◽  
Mimo Systems ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Main Idea ◽  
Transmit Antenna Selection ◽  
Mimo Communication ◽  
Input Multiple Output ◽  
Hardware Costs

A transmit antenna selection (TxAS) aided multi-user multiple-input multiple-output (MU-MIMO) system is proposed for operating in the MIMO downlink channel environments, which shows significant improvement in terms of higher data rate when compared to the conventional MU-MIMO systems operating without adopting TxAS, while maintaining low hardware costs. We opt for employing a simple yet efficient zero-forcing beamforming (ZFBF) linear precoding scheme at the transmitter in order to reduce the decoding complexity when considering users’ side. Moreover, considering that users within the same cell may require various qualities of service (QoS), we further propose a novel user-oriented smart TxAS (UOSTxAS) scheme, of which the main idea is to carry out AS based on the QoS requirements of different users. At last, we implement the proposed UOSTxAS scheme in the software defined radio (SDR) MIMO communication hardware platform, which is the first prototype hardware system that runs the UOSTxAS MU-MIMO scheme. Our results show that, by employing TxAS, the proposed UOSTxAS scheme is capable of offering higher data rates for priority users, while reasonably ensuring the performance of the common users requiring lower rates both in simulation and in the implemented SDR MIMO communication platform.

scholarly journals A Fast Adaptive Receive Antenna Selection Method in MIMO System

2013 ◽  
Vol 2013 ◽  
pp. 1-8
Author(s):  
Chaowei Wang ◽  
Weidong Wang ◽  
Cheng Wang ◽  
Shuai Wang ◽  
Yang Yu
Keyword(s):  
Mimo Systems ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
System Capacity ◽  
Adaptive Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Hardware Costs ◽  
Receive Antenna

Antenna selection has been regarded as an effective method to acquire the diversity benefits of multiple antennas while potentially reduce hardware costs. This paper focuses on receive antenna selection. According to the proportion between the numbers of total receive antennas and selected antennas and the influence of each antenna on system capacity, we propose a fast adaptive antenna selection algorithm for wireless multiple-input multiple-output (MIMO) systems. Mathematical analysis and numerical results show that our algorithm significantly reduces the computational complexity and memory requirement and achieves considerable system capacity gain compared with the optimal selection technique in the same time.

scholarly journals A Novel Machine Learning Aided Antenna Selection Scheme for MIMO Internet of Things

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2250 ◽  
Author(s):  
Wannian An ◽  
Peichang Zhang ◽  
Jiajun Xu ◽  
Huancong Luo ◽  
Lei Huang ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Communication Systems ◽  
Large Scale ◽  
Antenna Selection ◽  
Multiple Input Multiple Output ◽  
Training Data ◽  
Mimo Channel ◽  
Transmit Antenna Selection ◽  
Selection Scheme ◽  
Channel Conditions

In this article, we propose a multi-label convolution neural network (MLCNN)-aided transmit antenna selection (AS) scheme for end-to-end multiple-input multiple-output (MIMO) Internet of Things (IoT) communication systems in correlated channel conditions. In contrast to the conventional single-label multi-class classification ML schemes, we opt for using the concept of multi-label in the proposed MLCNN-aided transmit AS MIMO IoT system, which may greatly reduce the length of training labels in the case of multi-antenna selection. Additionally, applying multi-label concept may significantly improve the prediction accuracy of the trained MLCNN model under correlated large-scale MIMO channel conditions with less training data. The corresponding simulation results verified that the proposed MLCNN-aided AS scheme may be capable of achieving near-optimal capacity performance in real time, and the performance is relatively insensitive to the effects of imperfect CSI.

scholarly journals An Analytical Study of the Impact of Arbitrary Receive Antenna Correlation in TAS/MRC

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Juan P. Peña-Martín ◽  
Juan M. Romero-Jerez
Keyword(s):  
Closed Form ◽  
Channel Capacity ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Maximal Ratio Combining ◽  
Closed Form Expression ◽  
Transmit Antenna Selection ◽  
Input Multiple Output ◽  
The Impact

Novel closed-form expressions are derived for the performance analysis of a multiple-input multiple-output (MIMO) system in Rayleigh fading using transmit antenna selection (TAS) at the transmitter and maximal ratio combining (MRC) at the receiver. Receive antennas are assumed to be arbitrarily correlated, as no restriction is imposed on the correlation matrix. General exact and asymptotic expressions to evaluate the bit error rate (BER) of different modulation schemes are presented for uncoded transmission, and a closed-form expression is presented for the channel capacity. It is demonstrated that channel capacity may improve due to correlation at the receive antennas if the transmit array size is large enough as a result of a higher signal variability and the antenna selection performed at the transmitter. Monte Carlo simulations have been carried out to validate the analysis, showing an excellent agreement with the theoretical results.

Sign in / Sign up

Export Citation Format

Share Document