scholarly journals Use of Magnetic Folate-Dextran-Retinoic Acid Micelles for Dual Targeting of Doxorubicin in Breast Cancer

2013 ◽  
Vol 2013 ◽  
pp. 1-16 ◽  
Author(s):  
J. Varshosaz ◽  
H. Sadeghi-aliabadi ◽  
S. Ghasemi ◽  
B. Behdadfar
Keyword(s):  
Retinoic Acid ◽  
Inductively Coupled Plasma ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
Hydrophobic Core ◽  
X Ray Diffraction ◽  
Magnetic Iron Oxide Nanoparticles ◽  
Scanning Calorimetry ◽  
Inductively Coupled ◽  
Transmission Electron

Amphiphilic copolymer of folate-conjugated dextran/retinoic acid (FA/DEX-RA) was self-assembled into micelles by direct dissolution method. Magnetic iron oxide nanoparticles (MNPs) coated with oleic acid (OA) were prepared by hydrothermal method and encapsulated within the micelles. Doxorubicin HCl was loaded in the magnetic micelles. The characteristics of the magnetic micelles were determined by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM). The crystalline state of OA-coated MNPs and their heat capacity were analyzed by X-ray diffraction (XRD) and differential scanning calorimetry (DSC) methods, respectively. The iron content of magnetic micelles was determined using inductively coupled plasma optical emission spectrometry (ICP-OES). Bovine serum albumin (BSA) was used to test the protein binding of magnetic micelles. The cytotoxicity of doxorubicin loaded magnetic micelles was studied on MCF-7 and MDA-MB-468 cells using MTT assay and their quantitative cellular uptake by fluorimetry method. TEM results showed the MNPs in the hydrophobic core of the micelles. TGA results confirmed the presence of OA and FA/DEX-RA copolymer on the surface of MNPs and micelles, respectively. The magnetic micelles showed no significant protein bonding and reduced the IC50of the drug to about 10 times lower than the free drug.

scholarly journals High-efficiency method for recycling lithium from spent LiFePO4 cathode

2020 ◽  
Vol 9 (1) ◽  
pp. 1586-1593
Author(s):  
Tingting Yan ◽  
Shengwen Zhong ◽  
Miaomiao Zhou ◽  
Xiaoming Guo ◽  
Jingwei Hu ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
High Efficiency ◽  
Optical Emission ◽  
Extraction Process ◽  
Emission Spectrometry ◽  
X Ray Diffraction ◽  
Inductively Coupled ◽  
Moisture Analysis ◽  
Lifepo4 Cathode ◽  
Solid Liquid

Abstract The extraction of Li from the spent LiFePO4 cathode is enhanced by the selective removal using interactions between HCl and NaClO to dissolve the Li+ ion while Fe and P are retained in the structure. Several parameters, including the effects of dosage and drop acceleration of HCl and NaClO, reaction time, reaction temperature, and solid–liquid ratio on lithium leaching, were tested. The Total yields of lithium can achieve 97% after extraction process that lithium is extracted from the precipitated mother liquor, using an appropriate extraction agent that is a mixture of P507 and TBP and NF. The method also significantly reduced the use of acid and alkali, and the economic benefit of recycling is improved. Changes in composition, morphology, and structure of the material in the dissolution process are characterized by inductively coupled plasma optical emission spectrometry, scanning electron microscope, X-ray diffraction, particle size distribution instrument, and moisture analysis.

scholarly journals P2O5-Free Cerium Containing Glasses: Bioactivity and Cytocompatibility Evaluation

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3267
Author(s):  
Gigliola Lusvardi ◽  
Francesca Sgarbi Stabellini ◽  
Roberta Salvatori
Keyword(s):  
Inductively Coupled Plasma ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
X Ray Diffraction ◽  
Inductively Coupled ◽  
Icp Ms ◽  
Doped Glasses ◽  
Plasma Mass Spectrometry ◽  
Sbf Solution ◽  
Xrd Techniques

(1) Background: valuation of the bioactivity and cytocompatibility of P2O5-free and CeO2 doped glasses. (2) Methods: all glasses are based on the Kokubo (K) composition and prepared by a melting method. Doped glassed, K1.2, K3.6 and K5.3 contain 1.2, 3.6, and 5.3 mol% of CeO2. Bioactivity and cytotoxicity tests were carried out in simulated body fluid (SBF) solution and murine osteocyte (MLO-Y4) cell lines, respectively. Leaching of ions concentration in SBF was determined by inductively coupled plasma mass spectrometry (ICP-MS) and optical emission spectrometry (ICP-OES). The surface of the glasses were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. (3) Results: P2O5-free cerium doped glasses are proactive according to European directives. Cerium increases durability and retards, but does not inhibit, (Ca10(PO4)6(OH)2, HA) formation at higher cerium amounts (K3.6 and K5.3); however, cell proliferation increases with the amount of cerium especially evident for K5.3. (4) Conclusions: These results enforce the use of P2O5-free cerium doped bioactive glasses as a new class of biomaterials.

scholarly journals Synthesis and characterization of Na-P1 (GIS) zeolite using a kaolinitic rock

2020 ◽  
Author(s):  
Daniela Novembre ◽  
Domingo Gimeno ◽  
Alessandro Del Vecchio
Keyword(s):  
Inductively Coupled Plasma ◽  
Rietveld Method ◽  
Ambient Pressure ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
Quantitative Phase Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Inductively Coupled

Abstract This work focuses on the hydrothermal synthesis of Na-P1 zeolite by using a kaolinite rock coming from Romana (Sassari, Italy). The kaolin is calcined at a temperature of 650 °C and then mixed with calculated quantities of NaOH. The synthesis runs are carried out at ambient pressure and at variable temperatures of 65 ° and 100 °C. For the first time compared to the past, the Na-P1 zeolite is synthesized without the use of additives and through a protocol that reduces both temperatures and synthesis times. The synthesis products are analysed by X-ray diffraction, high temperature X-ray diffraction, infrared spectroscopy, scanning electron microscopy and inductively coupled plasma optical emission spectrometry. The cell parameters are calculated using the Rietveld method. Density and specific surface area are also calculated. The absence of amorphous phases and impurities in synthetic powders is verified through quantitative phase analysis using the combined Rietveld and reference intensity ratio methods.The results make the experimental protocol very promising for an industrial transfer.

scholarly journals Hydrogenation of benzene and toluene over supported rhodium and rhodium-gold catalysts

2021 ◽  
Vol 340 ◽  
pp. 01026
Author(s):  
Sapar Konuspayev ◽  
Minavar Shaimardan ◽  
Nurlan Annas ◽  
T.S. Abildin ◽  
Y.Y. Suleimenov
Keyword(s):  
Inductively Coupled Plasma ◽  
Optical Emission ◽  
Gold Catalysts ◽  
Hydrogenation Reaction ◽  
Benzene Hydrogenation ◽  
X Ray Diffraction ◽  
Toluene Hydrogenation ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Colloidal Method

Rhodium and rhodium-gold catalysts supported on amorphous aluminosilicates (ASA), titanium dioxide (rutile, TiO2) was prepared in two different ways: absorption and colloidal method. The catalysts were characterized by an inductively coupled plasma optical emission spectrometer (ICP-OES), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The activity and selectivity of the prepared catalysts were tested by the hydrogenation of benzene and toluene. Hydrogenation was conducted at a pressure of 4 MPa and a temperature 80 °C. The bimetallic Rh-Au/ASA catalyst prepared by the absorption method showed higher activity and selectivity in benzene hydrogenation reaction, the same catalyst prepared by the colloidal method demonstrated lower selectivity.

scholarly journals Catalytic Properties of Alumina-Supported Ruthenium, Platinum, and Cobalt Nanoparticles towards the Oxidation of Cyclohexane to Cyclohexanol and Cyclohexanone

2018 ◽  
Vol 13 (1) ◽  
pp. 24
Author(s):  
Ilhem Rekkab-Hammoumraoui ◽  
Abderrahim Choukchou-Braham
Keyword(s):  
Inductively Coupled Plasma ◽  
Catalytic Properties ◽  
Optical Emission ◽  
Cobalt Nanoparticles ◽  
Impregnation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Fourier Transformed Infrared Spectroscopy ◽  
Transmission Electron

A series of metal-loaded (Ru, Pt, Co) alumina catalysts were evaluated for the catalytic oxidation of cyclohexane using tertbutylhydroperoxide (TBHP) as oxidant and acetonitrile or acetic acid as solvent. These materials were prepared by the impregnation method and then characterized by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), H2 chemisorption, Fourier Transformed Infrared Spectroscopy (FTIR), High-Resolution Transmission Electron Microscopy (HRTEM), and X-ray Diffraction (XRD). All the prepared materials acted as efficient catalysts. Among them, Ru/Al2O3 was found to have the best catalytic activity with enhanced cyclohexane conversion of 36 %, selectivity to cyclohexanol and cyclohexanone of 96 % (57.6 mmol), and cyclohexane turnover frequency (TOF) of 288 h-1. Copyright © 2018 BCREC Group. All rights reservedReceived: 26th May 2017; Revised: 17th July 2017; Accepted: 18th July 2017; Available online: 22nd January 2018; Published regularly: 2nd April 2018How to Cite: Rekkab-Hammoumraoui, I., Choukchou-Braham, A. (2018). Catalytic Properties of Alumina-Supported Ruthenium, Platinum, and Cobalt Nanoparticles towards the Oxidation of Cyclohexane to Cyclohexanol and Cyclohexanone. Bulletin of Chemical Reaction Engineering & Catalysis, 13(1): 24-36 (doi:10.9767/bcrec.13.1.1226.24-35) 

Treatment of Phenol Wastewater by Catalytic Wet Peroxide Oxidation over Fe2O3/γ-Al2O3

2015 ◽  
Vol 1092-1093 ◽  
pp. 962-965
Author(s):  
Shu Xiang Lu ◽  
Ming Hui Lu ◽  
Lu Lu Gao ◽  
Dong Mei Mo
Keyword(s):  
Inductively Coupled Plasma ◽  
Phenol Degradation ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
Peroxide Oxidation ◽  
X Ray Diffraction ◽  
Inductively Coupled ◽  
Wet Peroxide Oxidation ◽  
Initial Ph ◽  
Catalytic Wet Peroxide Oxidation

Fe2O3/γ-Al2O3 catalysts were prepared by the method of wet impregnation and were characterized by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), N2 adsorption and Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES), respectively. The activity of Fe2O3/γ-Al2O3 for catalytic wet peroxide oxidation (CWPO) of phenol was tested. The effects of the initial pH of the phenolic aqueous solutions and the iron content of Fe2O3/γ-Al2O3 on phenol degradation have been studied. The results indicated that almost total removal of phenol and considerably high reduction of COD for the initial phenol concentration of 100-1000 mg/L were achieved under mild conditions. The leached iron from the catalyst was negligible.

scholarly journals Synthesis and characterization of Na-P1 (GIS) zeolite using a kaolinitic rock

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Daniela Novembre ◽  
Domingo Gimeno ◽  
Alessandro Del Vecchio
Keyword(s):  
Inductively Coupled Plasma ◽  
Rietveld Method ◽  
Ambient Pressure ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
Quantitative Phase Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Inductively Coupled

AbstractThis work focuses on the hydrothermal synthesis of Na-P1 zeolite by using a kaolinite rock coming from Romana (Sassari, Italy). The kaolin is calcined at a temperature of 650 °C and then mixed with calculated quantities of NaOH. The synthesis runs are carried out at ambient pressure and at variable temperatures of 65 and 100 °C. For the first time compared to the past, the Na-P1 zeolite is synthesized without the use of additives and through a protocol that reduces both temperatures and synthesis times. The synthesis products are analysed by X-ray diffraction, high temperature X-ray diffraction, infrared spectroscopy, scanning electron microscopy and inductively coupled plasma optical emission spectrometry. The cell parameters are calculated using the Rietveld method. Density and specific surface area are also calculated. The absence of amorphous phases and impurities in synthetic powders is verified through quantitative phase analysis using the combined Rietveld and reference intensity ratio methods. The results make the experimental protocol very promising for an industrial transfer.

Selective Oxidation of Cyclohexane to Cyclohexanone and Cyclohexanol over Au/Co3O4 Catalyst

2011 ◽  
Vol 284-286 ◽  
pp. 806-810
Author(s):  
Jun Wan ◽  
Jing Zhao ◽  
Ming Qiao Zhu ◽  
Huan Dai ◽  
Lei Wang
Keyword(s):  
Selective Oxidation ◽  
Inductively Coupled Plasma ◽  
Atomic Emission ◽  
Precipitation Method ◽  
Emission Spectrometry ◽  
X Ray Diffraction ◽  
Plasma Atomic Emission Spectrometry ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Co Precipitation

Au/Co3O4catalysts were prepared by a co-precipitation method and characterized by inductively coupled plasma-atomic emission spectrometry (ICP-AES), transmission electron microscope (TEM) and X-ray diffraction (XRD). The selective oxidation of cyclohexane to cyclohexanone and cyclohexanol was investigated over Au/Co3O4catalysts using molecular oxygen as oxidant. These catalysts showed higher activities as compared to the pure Co3O4under the same reaction conditions.

Biocompatible luminescent nanoparticles on the basis of calcium phosphate

2011 ◽  
Vol 1355 ◽  
Author(s):  
Sofia Dembski ◽  
Moritz Milde ◽  
Emeline Dassonneville ◽  
Carsten Gellermann ◽  
Torsten Klockenbring ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Sol Gel ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
Core Shell ◽  
Shell Nanoparticles ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Core Shell Nanoparticles

ABSTRACTLuminescent lanthanide doped SiO2/Hydroxylapatite (HAp) core/shell nanoparticles (NPs) were synthesized by sol-gel technology. The resulting NPs exhibited an amorphous SiO2 core and a crystalline luminescent shell. The formation of the HAp layer was possible at pH 8.5. The characterization of the resulting NPs was done by transmission electron microscopy, X-ray diffraction analysis, inductively-coupled plasma combined with optical emission spectrometry, and photoluminescence spectroscopy. Additionally, the newly developed SiO2/HAp:Ln3+ core/shell NPs were tested for their biocompatibility, e. g. by an in vitro cell culture based assay.

Sign in / Sign up

Export Citation Format

Share Document