scholarly journals Fabrication of Nanohydroxyapatite/Poly(caprolactone) Composite Microfibers Using Electrospinning Technique for Tissue Engineering Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Mohd Izzat Hassan ◽  
Tao Sun ◽  
Naznin Sultana
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Three Dimensional ◽  
Average Diameter ◽  
Tissue Engineering Scaffold ◽  
Engineering Applications ◽  
Electrospinning Technique ◽  
Fibrous Scaffolds ◽  
Nanosized Hydroxyapatite ◽  
Poly Caprolactone

Tissue engineering fibrous scaffolds serve as three-dimensional (3D) environmental framework by mimicking the extracellular matrix (ECM) for cells to grow. Biodegradable polycaprolactone (PCL) microfibers were fabricated to mimic the ECM as a scaffold with 7.5% (w/v) and 12.5% (w/v) concentrations. Lower PCL concentration of 7.5% (w/v) resulted in microfibers with bead defects. The average diameter of fibers increased at higher voltage and the distance of tip to collector. Further investigation was performed by the incorporation of nanosized hydroxyapatite (nHA) into microfibers. The incorporation of 10% (w/w) nHA with 7.5% (w/v) PCL solution produced submicron sized beadless fibers. The microfibrous scaffolds were evaluated using various techniques. Biodegradable PCL and nHA/PCL could be promising for tissue engineering scaffold application.

scholarly journals Three-Dimensional Printable Hydrogel Using a Hyaluronic Acid/Sodium Alginate Bio-Ink

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 794 ◽  
Author(s):  
Su Jeong Lee ◽  
Ji Min Seok ◽  
Jun Hee Lee ◽  
Jaejong Lee ◽  
Wan Doo Kim ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Hyaluronic Acid ◽  
Sodium Alginate ◽  
Three Dimensional ◽  
Fibroblast Cell ◽  
Chemical Crosslinking ◽  
Fibroblast Cell Line ◽  
Engineering Applications ◽  
Encapsulated Cells ◽  
Crosslinking Agents

Bio-ink properties have been extensively studied for use in the three-dimensional (3D) bio-printing process for tissue engineering applications. In this study, we developed a method to synthesize bio-ink using hyaluronic acid (HA) and sodium alginate (SA) without employing the chemical crosslinking agents of HA to 30% (w/v). Furthermore, we evaluated the properties of the obtained bio-inks to gauge their suitability in bio-printing, primarily focusing on their viscosity, printability, and shrinkage properties. Furthermore, the bio-ink encapsulating the cells (NIH3T3 fibroblast cell line) was characterized using a live/dead assay and WST-1 to assess the biocompatibility. It was inferred from the results that the blended hydrogel was successfully printed for all groups with viscosities of 883 Pa∙s (HA, 0% w/v), 1211 Pa∙s (HA, 10% w/v), and 1525 Pa∙s, (HA, 30% w/v) at a 0.1 s−1 shear rate. Their structures exhibited no significant shrinkage after CaCl2 crosslinking and maintained their integrity during the culture periods. The relative proliferation rate of the encapsulated cells in the HA/SA blended bio-ink was 70% higher than the SA-only bio-ink after the fourth day. These results suggest that the 3D printable HA/SA hydrogel could be used as the bio-ink for tissue engineering applications.

scholarly journals A Proposed Fabrication Method of Novel PCL-GEL-HAp Nanocomposite Scaffolds for Bone Tissue Engineering Applications

2010 ◽  
Vol 19 (4) ◽  
pp. 096369351001900 ◽  
Author(s):  
A. Hamlekhan ◽  
M. Mozafari ◽  
N. Nezafati ◽  
M. Azami ◽  
H. Hadipour
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Mechanical Test ◽  
Fibroblast Cell ◽  
Mouse Fibroblast ◽  
Fabrication Method ◽  
Engineering Applications ◽  
Poly Caprolactone

In this study, poly(∊-caprolactone) (PCL), gelatin (GEL) and nanocrystalline hydroxyapatite (HAp) was applied to fabricate novel PCL-GEL-HAp nanaocomposite scaffolds through a new fabrication method. With the aim of finding the best fabrication method, after testing different methods and solvents, the best method and solvents were found, and the nanocomposites were prepared through layer solvent casting combined with freeze-drying. Acetone and distillated water were used as the PCL and GEL solvents, respectively. The mechanical test showed that the increasing of the PCL weight through the scaffolds caused the improvement of the final nanocomposite mechanical behavior due to the increasing of the ultimate stress, stiffness and elastic modulus (8 MPa for 0% wt PCL to 23.5 MPa for 50% wt PCL). The biomineralization investigation of the scaffolds revealed the formation of bone-like apatite layers after immersion in simulated body fluid (SBF). In addition, the in vitro cytotoxity of the scaffolds using L929 mouse fibroblast cell line (ATCC) indicated no sign of toxicity. These results indicated that the fabricated scaffold possesses the prerequisites for bone tissue engineering applications.

ELECTROSPINNING OF BIOMATERIALS AND THEIR APPLICATIONS IN TISSUE ENGINEERING

Nano LIFE ◽  
2012 ◽  
Vol 02 (04) ◽  
pp. 1230010 ◽  
Author(s):  
JEN-CHIEH WU ◽  
H. PETER LORENZ
Keyword(s):  
Tissue Engineering ◽  
Electrospinning Process ◽  
Polymer Fibers ◽  
Nanometer Scale ◽  
High Porosity ◽  
Electrospinning Technique ◽  
Engineering Research ◽  
Fibrous Scaffolds ◽  
Surface Areas ◽  
Tissue Engineering Research

Electrospinning is a process for generating micrometer or nanometer scale polymer fibers with large surface areas and high porosity. For tissue engineering research, the electrospinning technique provides a quick way to fabricate fibrous scaffolds with dimensions comparable to the extracellular matrix (ECM). A variety of materials can be used in the electrospinning process, including natural biomaterials as well as synthetic polymers. The natural biomaterials have advantages such as excellent biocompatibility and biodegradability, which can be more suitable for making biomimic scaffolds. In the last two decades, there have been growing numbers of studies of biomaterial fibrous scaffolds using the electrospinning process. In this review, we will discuss biomaterials in the electrospinning process and their applications in tissue engineering.

Directing Axonal Growth: A Review on the Fabrication of Fibrous Scaffolds That Promotes the Orientation of Axons

Gels ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 25
Author(s):  
Devindraan Sirkkunan ◽  
Belinda Pingguan-Murphy ◽  
Farina Muhamad
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Neuronal Cells ◽  
Neural Tissue ◽  
Axonal Growth ◽  
Structural Proteins ◽  
Neural Cells ◽  
Neural Tissue Engineering ◽  
Fibrous Scaffolds ◽  
Specialized Function

Tissues are commonly defined as groups of cells that have similar structure and uniformly perform a specialized function. A lesser-known fact is that the placement of these cells within these tissues plays an important role in executing its functions, especially for neuronal cells. Hence, the design of a functional neural scaffold has to mirror these cell organizations, which are brought about by the configuration of natural extracellular matrix (ECM) structural proteins. In this review, we will briefly discuss the various characteristics considered when making neural scaffolds. We will then focus on the cellular orientation and axonal alignment of neural cells within their ECM and elaborate on the mechanisms involved in this process. A better understanding of these mechanisms could shed more light onto the rationale of fabricating the scaffolds for this specific functionality. Finally, we will discuss the scaffolds used in neural tissue engineering (NTE) and the methods used to fabricate these well-defined constructs.

Decellularized natural 3D cellulose scaffold derived from Borassus flabellifer (Linn.) as extracellular matrix for tissue engineering applications

2021 ◽  
pp. 118494
Author(s):  
Balaji Mahendiran ◽  
Shalini Muthusamy ◽  
R. Selvakumar ◽  
Narmadha Rajeswaran ◽  
Sowndarya Sampath ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Engineering Applications

CELL LADEN ALGINATE/ALBUMIN HYDROGEL FIBERS FOR POTENTIAL SKIN TISSUE ENGINEERING APPLICATIONS

2018 ◽  
Vol 30 (06) ◽  
pp. 1850045
Author(s):  
Maria Grazia Cascone ◽  
Elisabetta Rosellini ◽  
Simona Maltinti ◽  
Andrea Baldassare ◽  
Luigi Lazzeri
Keyword(s):  
Tissue Engineering ◽  
A549 Cells ◽  
Average Diameter ◽  
Favorable Effect ◽  
Engineering Applications ◽  
Residual Amount ◽  
Spinning Process ◽  
Proliferation Ability ◽  
Alginate Fibers ◽  
Kinetics Of

Alginate hydrogel fibers are receiving a great attention for tissue engineering applications. However, an important limitation of alginate is that it does not provide cell adhesion motifs. In this work, albumin was blended with alginate to improve the compatibility of alginate fibers with cells. Cell laden alginate/albumin fibers, potentially usable for skin regeneration, were obtained through a spinning process, by extruding an alginate/albumin solution containing cells into a calcium chloride solution. Cell laden pure alginate fibers were prepared for comparison. Plain alginate and alginate/albumin fibers were also produced. Morphological, mechanical and functional properties of the produced fibers were investigated. In addition, the ability of the fibers to release albumin and to support the viability and growth of A549 cells embedded into them was studied. Fibers with a uniform shape and an average diameter within the range 550–570[Formula: see text][Formula: see text]m were produced. The water content was [Formula: see text]% for alginate fibers, and [Formula: see text]% for alginate/albumin fibers. Stress–strain tests showed, up to a strain value of 20%, the same Young’s modulus for the produced fibers, regardless of the presence of albumin. Overall, obtained results demonstrated that morphology, size, hydrophilicity and mechanical properties were not affected by albumin. Albumin was gradually released over a period of 4 days, with a residual amount (13%) remaining into the fibers. Viability test was carried out on A549 cells, laden inside alginate and alginate/albumin fibers, to evaluate cell proliferation ability. A favorable effect of albumin on the loaded cells was evidenced by a faster kinetics of growth.

scholarly journals Harnessing the Topography of 3D Spongy-Like Electrospun Bundled Fibrous Scaffold via a Sharply Inclined Array Collector

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1444 ◽  
Author(s):  
Sun Hee Cho ◽  
Jeong In Kim ◽  
Cheol Sang Kim ◽  
Chan Hee Park ◽  
In Gi Kim
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Three Dimensional ◽  
Living System ◽  
Pivotal Role ◽  
Skin Tissue ◽  
Target Tissue ◽  
Fibrous Scaffold ◽  
Electrospun Scaffolds ◽  
Directional Change

To date, many researchers have studied a considerable number of three-dimensional (3D) cotton-like electrospun scaffolds for tissue engineering, including the generation of bone, cartilage, and skin tissue. Although numerous 3D electrospun fibrous matrixes have been successfully developed, additional research is needed to produce 3D patterned and sophisticated structures. The development of 3D fibrous matrixes with patterned and sophisticated structures (FM-PSS) capable of mimicking the extracellular matrix (ECM) is important for advancing tissue engineering. Because modulating nano to microscale features of the 3D fibrous scaffold to control the ambient microenvironment of target tissue cells can play a pivotal role in inducing tissue morphogenesis after transplantation in a living system. To achieve this objective, the 3D FM-PSSs were successfully generated by the electrospinning using a directional change of the sharply inclined array collector. The 3D FM-PSSs overcome the current limitations of conventional electrospun cotton-type 3D matrixes of random fibers.

Sign in / Sign up

Export Citation Format

Share Document