scholarly journals Automatic Foreground Extraction Based on Difference of Gaussian

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Yubo Yuan ◽  
Yun Liu ◽  
Guanghui Dai ◽  
Jing Zhang ◽  
Zhihua Chen
Keyword(s):  
Image Data ◽  
Input Image ◽  
Normalized Cut ◽  
Data Set ◽  
Foreground Extraction ◽  
Difference Of Gaussian ◽  
Different Color ◽  
The Given ◽  
Novel Algorithm

A novel algorithm for automatic foreground extraction based on difference of Gaussian (DoG) is presented. In our algorithm, DoG is employed to find the candidate keypoints of an input image in different color layers. Then, a keypoints filter algorithm is proposed to get the keypoints by removing the pseudo-keypoints and rebuilding the important keypoints. Finally, Normalized cut (Ncut) is used to segment an image into several regions and locate the foreground with the number of keypoints in each region. Experiments on the given image data set demonstrate the effectiveness of our algorithm.

scholarly journals An Image Processing Based Fungus Detection System for Mangoes

2019 ◽  
Vol 9 (1) ◽  
pp. 3493-3497
Keyword(s):  
Image Processing ◽  
Detection System ◽  
Health Problems ◽  
Processing Technique ◽  
Input Image ◽  
Image Processing Technique ◽  
High Yield ◽  
Data Set ◽  
Different Color ◽  
The Given

Fruits which grow with high yield in many states of India are rich in proteins. But due to addition of excess pesticides and chemicals intake of these fruits lead to serious health problems. It is necessary to identify the presence of chemical in the fruits before consuming it. In this project we have planned to develop an image processing technique to analyze whether the fruit is free from chemicals and fungus. In our paper, we have implemented MATLAB used as well as fungus present in the fruit. We capture the images of the fruit or we use datasets and train the database with different color-based changes that happen after adding chemicals to the fruit. The enhancement process is carried out in the captured image. Then image is segmented to hit the regions with affected spots in the fruit. K-means method is used to carry out the segmentation process. The input image is compared with the given data set for training to identify the images. In this way unhealthy fruits can be identified and the affected spots in the fruit can be detected.

scholarly journals Cloud Based Medical Image Data Analytics in Healthcare Management

2018 ◽  
Vol 7 (3.27) ◽  
pp. 135 ◽  
Author(s):  
R A. Karthika ◽  
K Dhinakaran ◽  
D Poorvaja ◽  
A V. Shanbaga Priya
Keyword(s):  
Image Processing ◽  
Data Analytics ◽  
Image Data ◽  
Input Image ◽  
Healthcare Management ◽  
Cloud Data ◽  
User Query ◽  
Prescriptive Analytics ◽  
User Friendly ◽  
The Given

In today’s world, the images form a huge amount of unstructured data from the public and the corporate sector. As a result of the growth of these types of data, modern analytical systems need to interpret and assimilate images. This brings in the need of image processing which involves the transformation from images to analytically organized and structured data. It performs required operation on the given input image and returns the related outputs based on the query. Digital image processing has pushed the envelope for the appraisal in various domains such as healthcare, defense and security, remote sensing, robotic visions, pattern recognitions and satellites. The complication involved in the healthcare domain makes it suitable to explore and induce the concept of image processing and increases the potential for prescriptive analytics. The cloud combined with the Image Processing provides the best environment for analyzing these images using the proposed technique. The proposed work involves processing the input images using the cloud data analytics that provides a user-friendly environment and retrieves the relevant images as well as text for the given user query which produces the outputs that are more efficient in terms of parameters like time, size, security and speed comparatively with the existing data mining process.  

Indoor and outdoor image classification

2019 ◽  
Vol 7 (4) ◽  
pp. 150-161
Author(s):  
Rajasekar Velswamy ◽  
Sorna Chandra Devadass ◽  
Karunakaran Velswamy ◽  
Jeyakrishnan Venugopal
Keyword(s):  
Object Recognition ◽  
Discrete Cosine Transform ◽  
Image Data ◽  
Image Database ◽  
Color Histogram ◽  
Data Sets ◽  
Data Set ◽  
Content Type ◽  
Transform Coefficients ◽  
The Given

Purpose The purpose of this paper is to classify the given image as indoor or outdoor with higher success rate by mixing various features like brightness, number of straight lines, number of Euclidean shapes and recursive shapes. Design/methodology/approach For annotating an image, it is very easy, if the image is categorized as indoor or outdoor. Many methods are proposed to classify the given image in these criteria but still the rate of uncategorized images occupies considerable area. This proposed work is the extension of the existing works already proposed by experts in this field. Some of the parameters mainly focused to classify are color histogram, orientation of edges, straightness of edges, discrete cosine transform coefficients, etc. In addition to that, this work includes finding of Euclidean shapes i.e. closed contours and recursive shapes in the given image. When the Euclidean shaped object dominates the recursive shapes then it is classified as indoor object and if the recursive shapes dominates, it is categorized as outdoor object. Findings This work is carried out on the standard image data sets. The data sets are Microsoft Research Cambridge (MRC) object recognition image database 1.0. and Kodak and Coral image data set. Totally 540 images are taken into account and the images are classified 95.4 percent correctly. Originality/value Many methods are proposed to classify the given image in these criteria but still the rate of uncategorized images occupies considerable area. This proposed work is the extension of the existing works already proposed by experts in this field. Some of the parameters mainly focused to classify are color histogram, orientation of edges, straightness of edges, discrete cosine transform coefficients, etc. In addition to that, this work includes finding of Euclidean shapes i.e. closed contours and recursive shapes in the given image. When the Euclidean shaped object dominates the recursive shapes then it is classified as indoor object and if the recursive shapes dominates, it is categorized as outdoor object. This work is carried out on the standard image data sets. The data sets are MRC object recognition image database 1.0. and Kodak and Coral image data set. Totally 540 images are taken into account and the images are classified 95.4 percent correctly.

Deep Learning Approaches for Whiteboard Image Quality Enhancement

2019 ◽  
Vol 2019 (1) ◽  
pp. 360-368
Author(s):  
Mekides Assefa Abebe ◽  
Jon Yngve Hardeberg
Keyword(s):  
Deep Learning ◽  
Image Quality ◽  
Image Data ◽  
Quality Enhancement ◽  
Network Architectures ◽  
Learning Approaches ◽  
Data Set ◽  
Image Quality Enhancement ◽  
Processing Techniques ◽  
White Balancing

Different whiteboard image degradations highly reduce the legibility of pen-stroke content as well as the overall quality of the images. Consequently, different researchers addressed the problem through different image enhancement techniques. Most of the state-of-the-art approaches applied common image processing techniques such as background foreground segmentation, text extraction, contrast and color enhancements and white balancing. However, such types of conventional enhancement methods are incapable of recovering severely degraded pen-stroke contents and produce artifacts in the presence of complex pen-stroke illustrations. In order to surmount such problems, the authors have proposed a deep learning based solution. They have contributed a new whiteboard image data set and adopted two deep convolutional neural network architectures for whiteboard image quality enhancement applications. Their different evaluations of the trained models demonstrated their superior performances over the conventional methods.

Noninvasive patient tracker mask for spinal 3D navigation: does the required large-volume 3D scan involve a considerably increased radiation exposure?

2020 ◽  
Vol 33 (6) ◽  
pp. 838-844
Author(s):  
Jan-Helge Klingler ◽  
Ulrich Hubbe ◽  
Christoph Scholz ◽  
Florian Volz ◽  
Marc Hohenhaus ◽  
...  
Keyword(s):  
Radiation Exposure ◽  
Image Data ◽  
3D Image ◽  
Flat Panel ◽  
3D Navigation ◽  
Data Set ◽  
Dose Area Product ◽  
Flat Panel Detector ◽  
3D Scan ◽  
Area Product

OBJECTIVEIntraoperative 3D imaging and navigation is increasingly used for minimally invasive spine surgery. A novel, noninvasive patient tracker that is adhered as a mask on the skin for 3D navigation necessitates a larger intraoperative 3D image set for appropriate referencing. This enlarged 3D image data set can be acquired by a state-of-the-art 3D C-arm device that is equipped with a large flat-panel detector. However, the presumably associated higher radiation exposure to the patient has essentially not yet been investigated and is therefore the objective of this study.METHODSPatients were retrospectively included if a thoracolumbar 3D scan was performed intraoperatively between 2016 and 2019 using a 3D C-arm with a large 30 × 30–cm flat-panel detector (3D scan volume 4096 cm3) or a 3D C-arm with a smaller 20 × 20–cm flat-panel detector (3D scan volume 2097 cm3), and the dose area product was available for the 3D scan. Additionally, the fluoroscopy time and the number of fluoroscopic images per 3D scan, as well as the BMI of the patients, were recorded.RESULTSThe authors compared 62 intraoperative thoracolumbar 3D scans using the 3D C-arm with a large flat-panel detector and 12 3D scans using the 3D C-arm with a small flat-panel detector. Overall, the 3D C-arm with a large flat-panel detector required more fluoroscopic images per scan (mean 389.0 ± 8.4 vs 117.0 ± 4.6, p < 0.0001), leading to a significantly higher dose area product (mean 1028.6 ± 767.9 vs 457.1 ± 118.9 cGy × cm2, p = 0.0044).CONCLUSIONSThe novel, noninvasive patient tracker mask facilitates intraoperative 3D navigation while eliminating the need for an additional skin incision with detachment of the autochthonous muscles. However, the use of this patient tracker mask requires a larger intraoperative 3D image data set for accurate registration, resulting in a 2.25 times higher radiation exposure to the patient. The use of the patient tracker mask should thus be based on an individual decision, especially taking into considering the radiation exposure and extent of instrumentation.

scholarly journals Fig Plant Segmentation from Aerial Images Using a Deep Convolutional Encoder-Decoder Network

2019 ◽  
Vol 11 (10) ◽  
pp. 1157 ◽  
Author(s):  
Jorge Fuentes-Pacheco ◽  
Juan Torres-Olivares ◽  
Edgar Roman-Rangel ◽  
Salvador Cervantes ◽  
Porfirio Juarez-Lopez ◽  
...  
Keyword(s):  
Precision Agriculture ◽  
Image Data ◽  
Ground Truth ◽  
Aerial Images ◽  
Aerial Image ◽  
Data Set ◽  
Visual Appearance ◽  
Aerial Robots ◽  
Lighting Conditions ◽  
Convolutional Encoder

Crop segmentation is an important task in Precision Agriculture, where the use of aerial robots with an on-board camera has contributed to the development of new solution alternatives. We address the problem of fig plant segmentation in top-view RGB (Red-Green-Blue) images of a crop grown under open-field difficult circumstances of complex lighting conditions and non-ideal crop maintenance practices defined by local farmers. We present a Convolutional Neural Network (CNN) with an encoder-decoder architecture that classifies each pixel as crop or non-crop using only raw colour images as input. Our approach achieves a mean accuracy of 93.85% despite the complexity of the background and a highly variable visual appearance of the leaves. We make available our CNN code to the research community, as well as the aerial image data set and a hand-made ground truth segmentation with pixel precision to facilitate the comparison among different algorithms.

scholarly journals ESR white paper: blockchain and medical imaging

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
◽  
Elmar Kotter ◽  
Luis Marti-Bonmati ◽  
Adrian P. Brady ◽  
Nandita M. Desouza
Keyword(s):  
Medical Imaging ◽  
Image Data ◽  
Distributed Database ◽  
Relevant Information ◽  
White Paper ◽  
Imaging Data ◽  
Data Set ◽  
Blockchain Technology ◽  
Potential Applications ◽  
Basic Technology

AbstractBlockchain can be thought of as a distributed database allowing tracing of the origin of data, and who has manipulated a given data set in the past. Medical applications of blockchain technology are emerging. Blockchain has many potential applications in medical imaging, typically making use of the tracking of radiological or clinical data. Clinical applications of blockchain technology include the documentation of the contribution of different “authors” including AI algorithms to multipart reports, the documentation of the use of AI algorithms towards the diagnosis, the possibility to enhance the accessibility of relevant information in electronic medical records, and a better control of users over their personal health records. Applications of blockchain in research include a better traceability of image data within clinical trials, a better traceability of the contributions of image and annotation data for the training of AI algorithms, thus enhancing privacy and fairness, and potentially make imaging data for AI available in larger quantities. Blockchain also allows for dynamic consenting and has the potential to empower patients and giving them a better control who has accessed their health data. There are also many potential applications of blockchain technology for administrative purposes, like keeping track of learning achievements or the surveillance of medical devices. This article gives a brief introduction in the basic technology and terminology of blockchain technology and concentrates on the potential applications of blockchain in medical imaging.

Geocoding Of A Multi-sensor Image Data Set

2005 ◽  
Author(s):  
D. Strobl ◽  
J. Raggam
Keyword(s):  
Image Data ◽  
Data Set

Artificial intelligence-based automatic visual inspection system for built heritage

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Lukman E. Mansuri ◽  
D.A. Patel
Keyword(s):  
Artificial Intelligence ◽  
Visual Inspection ◽  
Image Data ◽  
Inspection System ◽  
Data Set ◽  
Web Based ◽  
Content Type ◽  
Built Heritage ◽  
Automatic Visual Inspection ◽  
Inspection Systems

PurposeHeritage is the latent part of a sustainable built environment. Conservation and preservation of heritage is one of the United Nations' (UN) sustainable development goals. Many social and natural factors seriously threaten heritage structures by deteriorating and damaging the original. Therefore, regular visual inspection of heritage structures is necessary for their conservation and preservation. Conventional inspection practice relies on manual inspection, which takes more time and human resources. The inspection system seeks an innovative approach that should be cheaper, faster, safer and less prone to human error than manual inspection. Therefore, this study aims to develop an automatic system of visual inspection for the built heritage.Design/methodology/approachThe artificial intelligence-based automatic defect detection system is developed using the faster R-CNN (faster region-based convolutional neural network) model of object detection to build an automatic visual inspection system. From the English and Dutch cemeteries of Surat (India), images of heritage structures were captured by digital camera to prepare the image data set. This image data set was used for training, validation and testing to develop the automatic defect detection model. While validating this model, its optimum detection accuracy is recorded as 91.58% to detect three types of defects: “spalling,” “exposed bricks” and “cracks.”FindingsThis study develops the model of automatic web-based visual inspection systems for the heritage structures using the faster R-CNN. Then it demonstrates detection of defects of spalling, exposed bricks and cracks existing in the heritage structures. Comparison of conventional (manual) and developed automatic inspection systems reveals that the developed automatic system requires less time and staff. Therefore, the routine inspection can be faster, cheaper, safer and more accurate than the conventional inspection method.Practical implicationsThe study presented here can improve inspecting the built heritages by reducing inspection time and cost, eliminating chances of human errors and accidents and having accurate and consistent information. This study attempts to ensure the sustainability of the built heritage.Originality/valueFor ensuring the sustainability of built heritage, this study presents the artificial intelligence-based methodology for the development of an automatic visual inspection system. The automatic web-based visual inspection system for the built heritage has not been reported in previous studies so far.

Borderline and Depression: A Thin EEG Line

2021 ◽  
pp. 155005942110608
Author(s):  
Jakša Vukojević ◽  
Damir Mulc ◽  
Ivana Kinder ◽  
Eda Jovičić ◽  
Krešimir Friganović ◽  
...  
Keyword(s):  
Machine Learning ◽  
Borderline Personality ◽  
Machine Learning Techniques ◽  
Major Depressive ◽  
Everyday Clinical Practice ◽  
Data Set ◽  
Learning Techniques ◽  
Eeg Recordings ◽  
The Given ◽  
Close Interrelationship

In everyday clinical practice, there is an ongoing debate about the nature of major depressive disorder (MDD) in patients with borderline personality disorder (BPD). The underlying research does not give us a clear distinction between those 2 entities, although depression is among the most frequent comorbid diagnosis in borderline personality patients. The notion that depression can be a distinct disorder but also a symptom in other psychopathologies led our team to try and delineate those 2 entities using 146 EEG recordings and machine learning. The utilized algorithms, developed solely for this purpose, could not differentiate those 2 entities, meaning that patients suffering from MDD did not have significantly different EEG in terms of patients diagnosed with MDD and BPD respecting the given data and methods used. By increasing the data set and the spatiotemporal specificity, one could have a more sensitive diagnostic approach when using EEG recordings. To our knowledge, this is the first study that used EEG recordings and advanced machine learning techniques and further confirmed the close interrelationship between those 2 entities.

Sign in / Sign up

Export Citation Format

Share Document