scholarly journals Curcumin Loaded Microsponges for Colon Targeting in Inflammatory Bowel Disease: Fabrication, Optimization, andIn Vitroand Pharmacodynamic Evaluation

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Rashmi Sareen ◽  
Kavita Nath ◽  
Nitin Jain ◽  
K. L. Dhar
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Entrapment Efficiency ◽  
Diffusion Method ◽  
Drug Release Profile ◽  
Release Studies ◽  
Inflammatory Bowel ◽  
Full Factorial

The present study was aimed to develop and optimize the microsponges of curcumin for colon specific drug delivery in a view to bypass the upper gastrointestinal tract (GIT) for enhanced therapeutic effect. Microsponges were developed by quasi emulsion solvent diffusion method using 32full factorial design. Prepared microsponges were optimized in order to analyze the effects of independent variables (volume of ethanol and Eudragit L100) on the encapsulation efficiency, particle size, and drug release. The optimized formulation was subjected toin vivostudy using acetic acid induced colitis model in rats. The F7 was selected as optimized formulation based on particle size of 41.63 μm, % entrapment efficiency of 78.13%, and % cumulative drug release of 84.12%, and desirability factor of 0.83. Release studies revealed that microsponges prevented the premature release of curcumin in upper GIT and specifically released the drug at colonic pH. The drug release profile of F7 formulation was subjected to different kinetic models and based upon the best correlation coefficient (r2=0.9927) the release was found to follow Higuchi model, which suggested diffusion as the main mechanism of drug release. Pharmacodynamic study showed that curcumin loaded microsponges causes a significant decrease in edema, necrosis, and hemorrhage of colon as compared to free curcumin. This study proves that curcumin loaded microsponges may act as a promising drug delivery system for treatment of ulcerative colitis.

scholarly journals Formulation and characterization of flurbiprofen loaded microsponge based gel for sustained drug delivery

2019 ◽  
Vol 10 (4) ◽  
pp. 2765-2776
Author(s):  
Naresh Kshirasagar ◽  
Goverdhan Puchchakayala ◽  
Balamurgan K
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Diffusion Method ◽  
Skin Delivery ◽  
Sustained Action ◽  
Release Studies ◽  
Ft Ir ◽  
Polymer Ratio

The new investigation in this present work is to develop microsponges constructed novel drug delivery system for sustained action of Flurbiprofen. Quai-emulsion solvent diffusion method was engaged using Ethyl cellulose and Eudragit RS100 with drug: polymer ratio for development of microsponges. For optimization purposes, several factors are considered in the investigation. Several evaluation studies for the formed microsponges were carried out FT-IR, SEM, DSC, X-RD, particle size analysis, morphology, drug loading and In vitro drug release studies were carried out. Finally, it was concluded that there is no drug-polymer interaction as per DSC & FT-IR. Encapsulation efficiency, particle size and drug content showed a higher impact on alteration of drug-polymer ratio. SEM studies showed that morphological microsponges are spherical and porous in nature and with the mean particle size of 38.86 μm. The gel loaded with microsponges, were followed by In vitro and Ex vivo drug release studies by modified Franz diffusion cell. Skin delivery of optimized formulation enhanced the drug residence time and maintained therapeutic concentration for an extended period of time, which is possible to show sustained action of the drug.

scholarly journals Preparation and characterization of azathioprine microspheres for colon specific delivery

2019 ◽  
Vol 9 (2) ◽  
pp. 97-101
Author(s):  
Rinku Gonekar ◽  
Mohan Lal Kori
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Study Drug ◽  
Entrapment Efficiency ◽  
Release Profile ◽  
Intestinal Fluid ◽  
Drug Release Profile ◽  
Fecal Matter

The objective of the present study is to develop colon targeted drug delivery system using dextrin (polysaccharide) as a carrier for Azathioprine.  Microspheres containing azathioprine, dextrin and various excipients were prepared by solvent evaporation technique. The prepared microsphere were evaluated by different methods parameters like particle size,  drug entrapment efficiency, percentage yield, shape and surface morphology  and in vitro drug release study. Drug release profile was evaluated in simulated gastric, intestinal fluid and simulated colonic fluid. Best formulation was decided on the basis drug release profile in simulated gastric, intestinal fluid and simulated colonic fluid. In dextrin based microspheres, dextrin as a carrier was found to be suitable for targeting of Azathioprine for local action in the site of colon. Dextrin microspheres released 95-99% of azathioprine in simulated colonic fluid with 4% human fecal matter solution. The results of in-vitro studies of the azathioprine microspheres indicate that for colon targeting dextrin are suitable carriers to deliver the drug specifically in the colonic region. Dextrin based azathoprine microspheres showed no significance change in particle size and % residual upon storage at 5 ± 3ºC, 25 ± 2ºC/60 ± 5% RH (room temperature) and 40 ± 2ºC/75 ±5%RH humidity for three months. Keywords: azathioprine, microsphere, dextrin, colon specific drug delivery.

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

Formulation, Development and Characterization of Floating Beads of Diltiazem Hydrochloride

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Anamika Saxena Saxena ◽  
Santosh Kitawat ◽  
Kalpesh Gaur ◽  
Virendra Singh
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery Systems ◽  
Entrapment Efficiency ◽  
Repeated Administration ◽  
Alginate Beads ◽  
Delivery Systems ◽  
Sem Analysis ◽  
Formulation Development

The main goal of any drug delivery system is to achieve desired concentration of the drug in blood or tissue, which is therapeutically effective and nontoxic for a prolonged period. Various attempts have been made to develop gastroretentive delivery systems such as high density system, swelling, floating system. The recent developments of FDDS including the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, and their classification and formulation aspects are covered in detail. Gastric emptying is a complex process and makes in vivo performance of the drug delivery systems uncertain. In order to avoid this variability, efforts have been made to increase the retention time of the drug-delivery systems for more than 12 hours. The floating or hydrodynamically controlled drug delivery systems are useful in such application. Background of the research: Diltiazem HCL (DTZ), has short biological half life of 3-4 h, requires rather high frequency of administration. Due to repeated administration there may be chances of patient incompliance and toxicity problems. Objective: The objective of study was to develop sustained release alginate beads of DTZ for reduction in dosing frequency, high bioavailability and better patient compliance. Methodology: Five formulations prepared by using different drug to polymer ratios, were evaluated for relevant parameters and compared. Alginate beads were prepared by ionotropic external gelation technique using CaCl2 as cross linking agent. Prepared beads were evaluated for % yield, entrapment efficiency, swelling index in 0.1N HCL, drug release study and SEM analysis. In order to improve %EE and drug release, LMP and sunflower oil were used as copolymers along with sodium alginate.

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

scholarly journals Development, Optimisation and Evaluation of Ketoprofen Lipospheres

2020 ◽  
Vol 11 (SPL4) ◽  
pp. 1853-1863
Author(s):  
Shubhra Rai ◽  
Gopal Rai ◽  
Ashish Budhrani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Research Work ◽  
Extended Period ◽  
Entrapment Efficiency ◽  
Inflammatory Activity ◽  
Scanning Calorimetry ◽  
Anti Inflammatory

Lipospheres represent a novel type of fat-based encapsulation system produced for the topical drug delivery of bioactive compounds. The goal of this research work was to develop lipospheres, including ketoprofen applied for topical skin drug delivery. Ketoprofen lipospheres were formulated by melt emulsification method using stearic acid and Phospholipon® 90G. The lipospheres were analysed in terms of particle size and morphology, entrapment efficiency, Differential scanning calorimetry, In-vitro drug release, In-vivo (Anti-inflammatory activity). Outcomes of research revealed that particle size was found to be 9.66 µm and entrapment efficiency 86.21 ± 5.79 %. In-vivo, the study of ketoprofen loaded lipospheres formulation shows a higher plain formulation concentration in plasma (5.61 mg/mL). For dermis, ketoprofen retention was 27.02 ± 5.4 mg/mL for the lipospheres formulation, in contrast to that of the plain formulation group (10.05 ± 2.8 mg/mL). The anti-inflammatory effect of liposphere drug delivery systems was assessed by the xylene induced ear oedema technique and compared with marketed products. Finally, it seems that the liposphere drug delivery system possesses superior anti-inflammatory activity as compared to the marketed product gel consistencies. Liposphere may be capable of entrapping the medicament at very high levels and controlling its release over an extended period. Liposphere furnishes a proper size for topical delivery as well as is based on non-irritating and non-toxic lipids; it’s a better option for application on damaged or inflamed skin.

scholarly journals DEVELOPMENT OF RITONAVIR LOADED NANOPARTICLES: IN VITRO AND IN VIVO CHARACTERIZATION

2018 ◽  
Vol 11 (3) ◽  
pp. 284
Author(s):  
Pravin S Patil ◽  
Shashikant C Dhawale
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Dissolution Rate ◽  
Drug Carrier ◽  
Entrapment Efficiency ◽  
Significant Rise ◽  
Scanning Calorimetry ◽  
In Vitro Drug Release

 Objective: The purpose of the present investigation was to develop a nanosuspension to improve dissolution rate and oral bioavailability of ritonavir.Methods: Extended-release ritonavir loaded nanoparticles were prepared using the polymeric system by nanoprecipitation technique. Further, the effect of Eudragit RL100 (polymeric matrix) and polyvinyl alcohol (surfactant) was investigated on particle size and distribution, drug content, entrapment efficiency, and in vitro drug release from nanosuspension where a strong influence of polymeric contents was observed. Drug-excipient compatibility and amorphous nature of drug in prepared nanoparticles were confirmed by Fourier transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction studies, respectively.Results: Hydrophobic portions of Eudragit RL100 could result in enhanced encapsulation efficiency. However, increase in polymer and surfactant contents lead to enlarged particle size proportionately as confirmed by transmission electron microscopy. Nanosuspension showed a significant rise in dissolution rate with complete in vitro drug release as well as higher bioavailability in rats compared to the pure drug.Conclusion: The nanoprecipitation technique used in present research could be further explored for the development of different antiretroviral drug carrier therapeutics.

Fabrication of Vesicular Drug Delivery of Niosomal Topical Formulation for the Effective Treatment of Osteoarthritis

2016 ◽  
Vol 12 ◽  
pp. 1-8
Author(s):  
S. Nagalakshmi ◽  
T. Sandeep ◽  
S. Shanmuganathan
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Methyl Cellulose ◽  
Entrapment Efficiency ◽  
Lipid Vesicles ◽  
Tween 20 ◽  
Injection Method ◽  
Topical Gel ◽  
Release Studies

Delivery of drug through topical route, delivers most convenient and novel approach. The Skin can offer several advantages as a route of drug administration although its barrier nature makes it difficult for most drugs to penetrate in to and permeate through it. During the past decades there has been a lot of interest in lipid vesicles as a tool to improve topical drug delivery. Vesicular system such as liposomes, niosomes, ethosomes and elastic deformable vesicles provide an alternative for improved skin drug delivery. In fact vesicles can act as drug carriers controlling drug release. The Research findings were intended to develop sustained release of aceclofenac niosomes formulations in order to reduce gastrointestinal disturbances and to provide better effect when applied topically. Niosomes of aceclofenac was prepared by modified ether injection method using different ratio of surfactants (Tween 20, 40, 60 & 80) with cholesterol and drug. The developed formulations were optimized based on the high entrapment efficiency and in-vitro release studies. Optimized batch was selected and made in to topical niosomal gel using gelling agents like carbopol and sodium carboxy methyl cellulose. Formulation were evaluated for various parameters like vesicle shape, vesicle size, entrapment efficiency, drug content, compatibility studies, in-vitro release studies and stability studies. Ether injection method was found to be most satisfactory in terms of niosome particle size, drug entrapment efficiency was found to be 88.68 ±0.64 % and in-vitro release studies showed 40% of sustain drug release at the end of 8 hrs of study when compared with marketed formulation. Hence, the formulated niosomal topical gel was found to be a better alternative when compared to the marketed formulation in terms of better efficacy, bioavailability and permeation.

scholarly journals Development and In-Vitro Evaluation of Budesonide Mucoadhesive Microspherefor Pulmonary Drug Delivery

2021 ◽  
Vol 11 (2-S) ◽  
pp. 76-81
Author(s):  
Jddtadmin Journal
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Chemical Interaction ◽  
Entrapment Efficiency ◽  
Pulmonary Drug Delivery ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Drug Entrapment Efficiency

Thepurpose of the study was to develop and evaluatemucoadhesive microspheres of Budesonide for pulmonary drug delivery systemhaving prolonged residence time and sustained drug release. Microspheres were prepared by emulsificationsolvent evaporation technique using HPMC, carbopol as polymers in varying ratios. The microspheres were evaluated for its percentage yield, drug entrapment efficiency, particle size and shape, in vitro mucoadhesion study and in vitro drug release studies.The FTIR studies revealed no chemical interaction between the drug molecule and polymers and found that drug was compatible with used polymer. The mucoadhesive microspheres showed particle size, drug entrapment efficiency and yield in the ranges of148 - 164 μm, 68.0 - 85.0%and67.52 - 87.25% respectively. In vitro drug release and mucoadhesion study confirms thatformulationF5 was the best formulation as it releases 81.8 % at the end of 12 hr. in controlled manner and percentage mucoadhesion of 75.2 % after 10 hr. This confirms the developed budesonidemucoadhesive microspheres are promising for pulmonary drug delivery system.   Keywords: Budesonide, Mucoadhesion, Microspheres, Drug entrapment efficiency.

Casuarina equisetifoliaExtract Loaded Phytosomes: Optimization, Characterization andIn vivoEvaluation of Antidiabetic and Antihyperlipidemic Activities in Wistar Rats

2019 ◽  
Vol 9 (2) ◽  
pp. 116-133 ◽  
Author(s):  
Anjana Rani ◽  
Sunil Kumar ◽  
Roop K. Khar
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Therapeutic Efficacy ◽  
Entrapment Efficiency ◽  
Herbal Extract ◽  
Casuarina Equisetifolia ◽  
Novel Drug

Background:Herbal extracts have brilliant in-vitro activity but less in-vivo action in light of their macromolecular size and poor lipid solubility bringing about poor absorption and low bioavailability. These issues can be corrected by designing novel drug delivery systems. Phytosomes provide better absorption and bioavailability when compared to conventional herbal extract.Objective:This paper deals with the preparation, optimization and characterization of Phytosome of plant extract and in vivo assessment of antidiabetic and antihyperlipidemic activity for improved therapeutic efficacy having sufficient stability.Methods:Preliminary distinctive strategies were utilized to get ready Phytosome and antisolvent precipitation method was chosen. The formulation was guided by a full factorial design to study the effect of Independent variable on various dependent variables and resulted in an optimised product. Response contour plots were generated for each response factor to predict a phytosomal composition that yields phytosome formulation having least particle size and maximum entrapment efficiency.Results:Mean particle size, entrapment efficiency and Span value were found to be 295 ± 0.53nm, 82.43 ± 1.65% and 0.34 ± 0.14 respectively. Zeta potential was found to be 19.35mv, indicating the formation of stable formulation. In vitro release study described that the drug release follows the Korsmeyer- Peppas kinetic model. The results proved that Phytosomes of Casuarina equisetifolia extract exhibited more antidiabetic potential and antihyperlipidemic properties as compared to crude Casuarina extract.Conclusion:Phytosomes of Casuarina equestifolia extract was successfully formulated having good entrapment efficiency and physico-chemical characterization of the optimized product, confirming the formation of stable formulation. In vivo antidiabetic activity confirmed better potential of the optimised formulation. Consequently, it has been presumed that Phytosomes of Casuarina equisetifolia extract serve as a useful novel drug delivery system and provide more therapeutic efficacy than conventional plant extracts.

Sign in / Sign up

Export Citation Format

Share Document