scholarly journals Articular Eminence Inclination, Height, and Condyle Morphology on Cone Beam Computed Tomography

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Dilhan İlgüy ◽  
Mehmet İlgüy ◽  
Erdoğan Fişekçioğlu ◽  
Semanur Dölekoğlu ◽  
Nilüfer Ersan
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Mean Value ◽  
Cone Beam ◽  
Articular Eminence ◽  
Age And Gender ◽  
Mean Values ◽  
The Mean ◽  
And Gender ◽  
The Relationship

Aim. The aim of the present study was to examine the relationship between articular eminence inclination, height, and thickness of the roof of the glenoid fossa (RGF) according to age and gender and to assess condyle morphology including incidental findings of osseous characteristics associated with osteoarthritis (OA) of the temporomandibular joint (TMJ) using cone beam computed tomography (CBCT).Materials and Methods. CBCT images of 105 patients were evaluated retrospectively. For articular eminence inclination and height, axial views on which the condylar processes were seen with their widest mediolateral extent being used as a reference view for secondary reconstruction. Condyle morphology was categorized both in the sagittal and coronal plane.Results. The mean values of eminence inclination and height of males were higher than those of females (P<0.05). There were significant differences in the RGF thickness in relation to sagittal condyle morphology. Among the group of OA, the mean value of the RGF thickness for “OA-osteophyte” group was the highest (1.59 mm), whereas the lowest RGF values were seen in the “OA-flattening.”Conclusion. The sagittal osteoarthritic changes may have an effect on RGF thickness by mechanical stimulation and changed stress distribution. Gender has a significant effect on eminence height (Eh) and inclination.

The relationship of articular eminence and mandibular fossa morphology to facial profile and gender determined by cone beam computed tomography

2019 ◽  
Vol 128 (6) ◽  
pp. 660-666 ◽  
Author(s):  
Eliana Dantas da Costa ◽  
Priscila Dias Peyneau ◽  
Gina Delia Roque-Torres ◽  
Deborah Queiroz Freitas ◽  
Laura Ricardina Ramírez-Sotelo ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Articular Eminence ◽  
Facial Profile ◽  
Mandibular Fossa ◽  
And Gender ◽  
Relationship Of ◽  
The Relationship

A retrospective pilot study of correlation of first maxillary premolar root trunk length with age and gender: a cone beam computed tomography study

2020 ◽  
Vol 69 (1) ◽  
Author(s):  
Andrea Pilloni ◽  
Lorenza Montanaro ◽  
Fabiola Dell'olmo ◽  
Alberto Fonzar ◽  
Francesco Cairo ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Pilot Study ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Age And Gender ◽  
Trunk Length ◽  
And Gender

scholarly journals Height difference between the vestibular and palatal walls and palatal width: a cone beam computed tomography approach

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
P. López-Jarana ◽  
C. M. Díaz-Castro ◽  
A. Falcão ◽  
C. Falcão ◽  
J. V. Ríos-Santos ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Bone Thickness ◽  
Height Difference ◽  
Mean Values ◽  
The Mean ◽  
Maxilla And Mandible ◽  
Palatal Bone ◽  
Two Parameters

Abstract Background The objective of this study was to measure two parameters involved in tri-dimensional implant planning: the position of the buccal and palatal bone wall and the palatal thickness. Methods Cone beam computed tomography (CBCT) images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to December 2014. The height difference between the palatal and buccal walls was measured on the most coronal point of both walls. The thickness of the palatal wall was measured 2 mm from the most coronal point of the palatal wall. Results The mean values in the maxilla were 1.7 ± 0.9 mm for central and lateral incisors, 2.2 ± 1.7 mm for canines, 1.6 ± 0.9 mm for premolars and 1.9 ± 1.5 mm for molars. In the lower jaw, the mean values were 1.3 ± 0.8 mm for incisors, 1.7 ± 1.2 mm for canines, 2.3 ± 1.3 mm for premolars, and 2.6 ± 1.7 mm for molars. In the upper jaw, more than 55% of maxillary teeth (excluding second premolars and molars) presented mean height differences greater than 1 mm. In the mandible, more than 60% of incisors showed a buccal bone thickness of 1 mm from the apical to lingual aspect. All teeth except the second premolar presented a buccal wall located more than 1 mm more apically than the lingual bone wall. Conclusions The buccal bone wall is located more apically (greater than 1 mm) than the palatal or lingual table in most of the cases assessed. The thickness of the palatal or lingual table is also less than 2 mm in the maxilla and mandible, except in the upper canines and premolars and the lower molars.

scholarly journals Custom Focal Trough in Cone-Beam Computed Tomography Reformatted Panoramic Versus Digital Panoramic for Mental Foramen Position to Aid Implant Planning

2020 ◽  
Vol 10 ◽  
pp. 34
Author(s):  
Khaled Beshtawi ◽  
Emad Qirresh ◽  
Mohamed Parker ◽  
Shoayeb Shaik
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Mental Foramen ◽  
Reference Points ◽  
Cone Beam ◽  
Vertical Position ◽  
Linear Measurements ◽  
Mean Values ◽  
The Mean ◽  
High Level

Objectives: To compare the linear measurements from digital panoramic (DP) radiographs and cone-beam computed tomography (CBCT) volumes for the localization of the mental foramen (MF). Material and Methods: Thirty-one patients with panoramic and CBCT radiographs depicted on the same machine were analyzed. The vertical and horizontal positions of the MF were compared by the differences in distances measured from reference points to the boundaries (tangents) of the MF in digital panoramic (DP) and CBCT reformatted panoramic (CRP) views. The vertical position of MF was also analyzed on CBCT oblique coronal views (CORO) and compared with its corresponding distances on DP and CRP views. Results: Statistically significant differences (P < 0.05) were found in all compared measurements between CRP and DP views. In addition, the vertical distance (Y1) compared between DP, CRP, and CORO views also showed a statistically significant measurement discrepancy in the mean distance (P < 0.000) with the highest mean difference of 1.59 mm (P < 0.05) was attained from Y1 (DP-CORO). Inter- and intra-examiner analysis indicated a high level of agreement for all measurements. Conclusion: The mean values of discrepancies in measurements between DP and CRP views for horizontal and vertical linear measurements were clinically tolerable. Nevertheless, significant differences in the vertical MF position were detected between the panoramic views (DP, CRP) and the coronal views (CORO). This implies that the use of coronal view measurements during implant planning might reduce the risk of neurovascular injuries.

scholarly journals Soft tissue changes after anterior maxillary osteotomy by using 3D CBCT scanning.

2018 ◽  
Vol 4 (4) ◽  
pp. 1245-1250 ◽  
Author(s):  
Ahmed AL-Omar ◽  
Usama AL-Dakroroy
Keyword(s):  
Computed Tomography ◽  
Soft Tissue ◽  
Cone Beam Computed Tomography ◽  
Soft Tissues ◽  
Mean Value ◽  
Cone Beam ◽  
Maxillary Osteotomy ◽  
Tissue Changes ◽  
The Mean ◽  
Soft Tissue Changes

The objective of this study was to evaluate the soft tissue changes after anterior maxillary osteotomy using cone beam computed tomography. The study included twelve patients diagnosed as suffering from an excess of the anterior part of maxilla and required surgical correction by anterior maxillary osteotomy. Assessment of Cone beam computed tomography in evaluation the soft tissue changes. All cases subjected to anterior maxillary osteotomy using modified Cuper technique. Follow up of cases was does clinically and radio- graphically by cone beam computed tomography. The results of the study proved that the statistically significant increase in mean Nasolabial angle after 6 months was 5.2 degrees, the mean value of nasal width after 6 months was 0,9mm. The mean value of Philtrum length was 3.3mm. In conclusion, Cone Beam Computed Tomography can be used to obtain dimensionally accurate linear and angular measurement from bony maxillofacial structure and landmarks and allows accurate, three-dimensional imaging of hard and soft tissues.

scholarly journals Second Root Canal in Mandibular Incisors: an Ex Vivo Cone-Beam Computed Tomography (CBCT) Study

2018 ◽  
Vol 22 (1) ◽  
pp. 38-42
Author(s):  
Maria Elpida Kalaitzoglou ◽  
Eleni Kantilieraki ◽  
Charalampos Beltes ◽  
Christos Angelopoulos ◽  
Panagiotis Beltes
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Ex Vivo ◽  
Cone Beam ◽  
Mean Values ◽  
Root Canals ◽  
The Mean ◽  
Type 3 ◽  
Mandibular Incisors

SummaryBackground/Aim: To analyze the internal morphology of mandibular incisors with two root canals using cone-beam computed tomography (CBCT). Material and Methods: 289 (143 central and 146 lateral) extracted intact mandibular incisors were radiographed for detection of a second root canal. The teeth presenting a second root canal were imaged with CBCT and evaluated regarding: root canal type, the distance of the cementoenamel junction (CEJ) to the bifurcation of the canals and the distance of the canal fusion to the apical foramen (in teeth in which canals rejoined). Results: Out of 143 central and 146 lateral mandibular incisors, 41 (28.7%) and 44 (30.1%) teeth respectively showed a second root canal. Types II, III, V and an additional type to Vertucci’s classification were identified. Type III was the most prevalent and presented in 30 (73.2%) central and 34 (77.3%) lateral mandibular incisors with two root canals. The mean values of the distance of the CEJ to the canal bifurcation were 4.2 mm and 4.0 mm for central and lateral mandibular incisors respectively. The mean values of the distance of the canal fusion to the apical foramen 5.5 mm and 5.1 mm for central and lateral mandibular incisors respectively. Conclusions: Mandibular incisors with two root canals mainly present with Vertucci’s Type 3 canal configuration. The canal bifurcation was identified mostly at the coronal and middle thirds of the root, while the canal fusion occurred in the middle third of the root.

scholarly journals Usefulness of measuring radiographic density of axis vertebra in patients at risk of osteoporosis: A cone-beam computed tomography study

2018 ◽  
Vol 12 (04) ◽  
pp. 496-501
Author(s):  
Mustafa Alkhader ◽  
Mohammad S. Alrashdan ◽  
Yousef Khader
Keyword(s):  
Computed Tomography ◽  
At Risk ◽  
High Risk ◽  
Cone Beam Computed Tomography ◽  
Predictive Power ◽  
Mean Value ◽  
Low Risk ◽  
Cone Beam ◽  
Patients At Risk ◽  
The Mean

ABSTRACT Objective: Using cone-beam computed tomography (CBCT) images, the aim of the study was to evaluate the usefulness of measuring radiographic density of the axis vertebra (RDAV) in patients at risk of osteoporosis. Materials and Methods: Two hundred and forty-seven old patients (109 males and 138 females) aged between 50 and 80 years (mean age: 59.68 ± 7.27) were examined by CBCT. Using InVivoDental, v. 5.0 (Anatomage Inc., San Jose, CA), RDAV and mental index (MI) were measured twice and correlated using Pearson's correlation coefficients. Patients were divided into two categories: high risk and low risk of osteoporosis using 3.1 mm of MI as a cutoff value, and the mean value of RDAV was compared and correlated using independent samples' t-test and regression analysis. Receiver-operating characteristic (ROC) curve analysis was also used to examine the predictive power of RDAV. Results: The mean value of RDAV was moderately correlated with MI (r = 0.32), and in patients at low risk of osteoporosis, the mean value of RDAV was significantly higher than in patients at high risk of osteoporosis. In multivariate binary logistic regression, the odds of being at risk of osteoporosis decreased by 1% with one unit increase in RDAV (odds ratio = 0.988, 95% confidence interval: 0.983–0.993; P < 0.005). ROC analysis showed that the mean value of RDAV had a high predictive power for predicting patients at risk of osteoporosis (area under the curve = 0.761 for females and 0.649 for males). Conclusions: Measuring RDAV is considered useful in predicting patients at risk of osteoporosis.

Age- and Gender-related Differences in the Position of the Inferior Alveolar Nerve by Using Cone Beam Computed Tomography

2009 ◽  
Vol 35 (7) ◽  
pp. 944-949 ◽  
Author(s):  
Jay D. Simonton ◽  
Bruno Azevedo ◽  
William G. Schindler ◽  
Kenneth M. Hargreaves
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Inferior Alveolar Nerve ◽  
Cone Beam ◽  
Age And Gender ◽  
And Gender
Sign in / Sign up

Export Citation Format

Share Document