scholarly journals Effects of Chlorinated Polypropylene on the Conformation of Polypropylene in Polypropylene/Chlorinated Polypropylene/Polyaniline Composites

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Jianjun Chen ◽  
Yueyue Jia ◽  
Zhiye Zhang ◽  
Xinlong Wang ◽  
Lin Yang
Keyword(s):  
Intensity Ratio ◽  
Maximum Level ◽  
In Situ Ftir ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Infrared Band ◽  
X Ray ◽  
Polyaniline Composites

We investigated the changes in the conformation and crystalline structure of polypropylene (PP) using a combination of Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC) based on PP/chlorinated PP (CPP)/polyaniline (PANI) composites. The DSC heating thermograms and WAXD patterns of the PP/CPP/PANI composites showed that theβ-crystal was affected greatly by the CPP content. Characterization of the specific regularity in the infrared band variation showed that the conformational orders of the helical sequences in PP exhibited major changes that depended on the CPP content. Initially, the intensity ratio ofA840/A810increased with the CPP concentration and reached its maximum level when the CPP content was <13.22% before decreasing as the CPP content increased further. The effect of increased temperature on the conformation of PP was studied by in situ FTIR. Initially, the intensity ratio ofA999/A973decreased slowly with increasing the temperature up to 105°C before decreasing sharply with further increases in temperature and then decreasing slowly again when the temperature was higher than 128°C.

scholarly journals Characterization of the Interface Between the Bulk Glass Forming Alloy Zr41Ti14Cu12Ni10Be23 with Pure Metals and Ceramics

2000 ◽  
Vol 15 (7) ◽  
pp. 1617-1621 ◽  
Author(s):  
Jan Schroers ◽  
Konrad Samwer ◽  
Frigyes Szuecs ◽  
William L. Johnson
Keyword(s):  
Sessile Drop ◽  
Bulk Glass ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Glass Forming ◽  
Processing Times ◽  
Thermal Stability Of

The reaction of the bulk glass forming alloy Zr41Ti14Cu12Ni10Be23 (Vit 1) with W, Ta, Mo, AlN, Al2O3, Si, graphite, and amorphous carbon was investigated. Vit 1 samples were melted and subsequently solidified after different processing times on discs of the different materials. Sessile drop examinations of the macroscopic wetting of Vit 1 on the discs as a function of temperature were carried out in situ with a digital optical camera. The reactions at the interfaces between the Vit 1 sample and the different disc materials were investigated with an electron microprobe. The structure and thermal stability of the processed Vit 1 samples were examined by x-ray diffraction and differential scanning calorimetry. The results are discussed in terms of possible applications for composite materials.

Preparation and Characterization of Polysulfone Membranes Containing Ag Nanoparticles by a Convenient Ultraviolet Irradiation Technique

2009 ◽  
Vol 151 ◽  
pp. 145-149 ◽  
Author(s):  
Viorica Gaina ◽  
Constantin Gaina ◽  
Mihaela Olaru
Keyword(s):  
Ultraviolet Irradiation ◽  
Silver Salt ◽  
In Situ Reduction ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Aggregation Phenomena

A novel silver/polysulfone nanocomposite membrane was prepared by a convenient ultraviolet irradiation technique, through in situ reduction of silver salt (AgNO3) added to a solution of commercial UDEL polyethersulfone dissolved in N-methyl-2-pyrrolidinone (NMP). The UV-reduction of Ag+ to Ag0 nanoparticles was confirmed by means of UV-vis spectroscopy, from aggregation phenomena. The effects of dispersion of silver nanoparticles within polysulfone matrix were investigated by means of ATR-FTIR, dynamic mechanical thermal analysis and differential scanning calorimetry. Using X-ray diffraction, it was shown that annealing produced silver crystallites of 70-90 nm across, which are partially textured in “sheetlike” {110} planes.

Study of Cellulose-Dibutyl Sebacate Copolymer Synthesis and Characterization of Crosslinked Cellulose-Dibutyl Sebacate Copolymers for Oil Absorbency

2011 ◽  
Vol 311-313 ◽  
pp. 2075-2083
Author(s):  
Halidan Mamat
Keyword(s):  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Reaction Conditions ◽  
X Ray ◽  
Oil Absorbency ◽  
Dibutyl Sebacate ◽  
Oil Absorbent

A novel cellulose-based oil absorbent crosslinked cellulose-dibutyl sebacate copolymers was prepared by the graft crosslinking polymerization of in situ synthesized dibutyl sebacate and cotton cellulose using potassium persulfate as an initiator. The copolymers were characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermogravimetry, differential scanning calorimetry, etc. The effects of reaction conditions, such as, ratio of reaction regents, reaction temperature, reaction time, etc, on the efficiency of oil absorbency were examined. The optimized reaction conditions for the synthesis of crosslinked cellulose-dibutyl sebacate copolymers were: m(cotton pulp):m(K2S2O8 initiator):m(dibutyl sebacate) = 1 0.025 2.0(W/W)，75°C，and 5-6 h. The resulting crosslinked cellulose-dibutyl sebacate copolymers were floppy and exhibited excellent oil absorbency efficiency.

Preparation and characterization of conducting nylon 6 fibers

2009 ◽  
Vol 24 (8) ◽  
pp. 2728-2735 ◽  
Author(s):  
A. Saritha Chandran ◽  
Sunil K. Narayanankutty
Keyword(s):  
Photoelectron Spectroscopy ◽  
In Situ Polymerization ◽  
Fiber Surface ◽  
Nylon 6 ◽  
Etching Time ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray

Conducting nylon 6 fibers were prepared by in situ polymerization of aniline on to the fiber surface, after providing a chemical etching treatment to the fibers using chromic acid. The properties of the etched and polyaniline (PANI) coated fibers were evaluated using scanning electron microscopy, x-ray photoelectron spectroscopy, infrared spectroscopy, x-ray diffraction, thermogravimetry, and differential scanning calorimetry. Though the etching process caused a marginal decline in the mechanical properties of the fiber, it provided a reasonably rough surface for PANI adhesion and enhanced the conductivity of the fiber. The conductivity increased from 4.22 × 10−2 to 3.72 × 10−1 S/cm at an etching time of 4 h.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Studies on the Preparation, Characterization and Solubility of -Cyclodextrin-Roxythromycin Inclusion Complexes

2009 ◽  
Vol 2 (2) ◽  
pp. 523-530
Author(s):  
D. Nagasamy Venkatesh ◽  
S. Karthick ◽  
M. Umesh ◽  
G. Vivek ◽  
R.M. Valliappan ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Inclusion Complexes ◽  
Phase Solubility ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ir Studies ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Roxythromycin/ β-cyclodextrin (Roxy/ β-CD) dispersions were prepared with a view to study the influence of β-CD on the solubility and dissolution rate of this poorly soluble drug. Phase-solubility profile indicated that the solubility of roxythromycin was significantly increased in the presence of β-cyclodextrin and was classified as AL-type, indicating the 1:1 stoichiometric inclusion complexes. Physical characterization of the prepared systems was carried out by differential scanning calorimetry (DSC), X-ray diffraction studies (XRD) and IR studies. Solid state characterization of the drug β-CD binary system using XRD, FTIR and DSC revealed distinct loss of drug crystallinity in the formulation, ostensibly accounting for enhancement of dissolution rate.

Characterization of New Nonstoichiometric Ferroelectric (Li0.95Cu0.15)Ta0.76Nb0.19O3 and Comparative Study With (Li0.95Cu0.15)Ta0.57Nb0.38O3 as Photocatalysts in Microbial Fuel Cells

2018 ◽  
Vol 16 (2) ◽  
Author(s):  
S. Louki ◽  
N. Touach ◽  
A. Benzaouak ◽  
V. M. Ortiz-Martínez ◽  
M. J. Salar-García ◽  
...  
Keyword(s):  
Power Density ◽  
Microbial Fuel Cells ◽  
Removal Rate ◽  
Oxygen Demand ◽  
Ferroelectric Material ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Uv Visible

This work investigates the photocatalytic activity of new ferroelectric material with formula (Li0.95Cu0.15)Ta0.76Nb0.19O3 (LT76) in a single chamber microbial fuel cell (MFC) and compares its performance with the similar photocatalyst (Li0.95Cu0.15)Ta0.57Nb0.38O3 (LT57). The photocatalysts LT76 and LT57 were synthesized by ceramic route under the same conditions, with the same starting materials. The ratio Ta/Nb was fixed at 4.0 and 1.5 for LT76 and LT57, respectively. These phases were characterized by different techniques including X-ray diffraction (XRD), transmission electronic microscopy (TEM), particle size distribution (PSD), differential scanning calorimetry (DSC), and ultraviolet (UV)–visible (Vis). The new photocatalyst LT76 presents specific surface area of 0.791 m2/g and Curie temperature of 1197 °C. The photocatalytic efficiency of this material is assessed in terms of wastewater treatment and electricity generation by power density and removal rate of chemical oxygen demand (COD) in the presence of a light source. The values of maximum power density and COD removal were 19.77 mW/m3 and 93%, respectively, for LT76.

scholarly journals Stacking Control by Molecular Symmetry of Sterically Protected Phthalocyanines

Molecules ◽  
2020 ◽  
Vol 25 (23) ◽  
pp. 5552
Author(s):  
Ryota Kudo ◽  
Masahiro Sonobe ◽  
Yoshiaki Chino ◽  
Yu Kitazawa ◽  
Mutsumi Kimura
Keyword(s):  
Lamellar Structure ◽  
Synthesis And Characterization ◽  
Molecular Symmetry ◽  
X Ray Diffraction ◽  
Melting Points ◽  
Scanning Calorimetry ◽  
Structural Isomers ◽  
X Ray ◽  
Temperature Controlled

The synthesis and characterization of two phthalocyanine (Pc) structural isomers, 1 and 2, in which four 2,6-di(hexyloxy)phenyl units were attached directly to the 1,8,15,22- or 1,4,15,18-positions of the Pc rings, are described. Both Pcs 1 and 2 exhibited low melting points, i.e., 120 and 130 °C respectively, due to the reduction in intermolecular π-π interaction among the Pc rings caused by the steric hindrance of 2,6-dihexyloxybenzene units. The thermal behaviors were investigated with temperature-controlled polarizing optical microscopy, differential scanning calorimetry, powder X-ray diffraction, and absorption spectral analyses. Pc 1, having C4h molecular symmetry, organized into a lamellar structure containing lateral assemblies of Pc rings. In contrast, the other Pc 2 revealed the formation of metastable crystalline phases, including disordered stacks of Pcs due to rapid cooling from a melted liquid.

Synthesis and Characterization of the PANI/ITO Conducting Nanocomposites

2010 ◽  
Vol 663-665 ◽  
pp. 542-545 ◽  
Author(s):  
Bing Jie Zhu ◽  
Xin Wei Wang ◽  
Mei Fang Zhu ◽  
Qing Hong Zhang ◽  
Yao Gang Li ◽  
...  
Keyword(s):  
Doping Concentration ◽  
In Situ Polymerization ◽  
Synthesis And Characterization ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Conductivity ◽  
Scanning Electron

The PANI/ITO conducting nanocomposites have been synthesized by in-situ polymerization. The obtained nanocomposites were characterized by X-ray diffraction pattern, scanning electron microscopy and Fourier transform infrared. Electrical conductivity measurements on the samples pressed into pellets showed that the maximum conductivity attained 2.0 ± 0.05 S/cm for PANI/ITO nanocomposites, at ITO doping concentration of 10 wt%. The results of the present work may provide a simple, rapid and efficient approach for preparing PANI/ITO nanocomposites.

Synthesis and Characterization of Tetraphenylphosphonium Tetraazidoborate

2002 ◽  
Vol 57 (6) ◽  
pp. 621-624 ◽  
Author(s):  
Wolfgang Fraenk ◽  
Heinrich Nöth ◽  
Thomas M. Klapötke ◽  
Max Suter
Keyword(s):  
Single Crystal ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray

AbstractTetraphenylphosphonium tetraazidoborate, [P(C6H5)4][B(N3)4], was obtained from B(N3)3 - in situ prepared from BH3 · O(C2H5)2 and HN3 - and [P(C6H5)4][N3]. Recrystallization from an acetonitrile / hexane mixture yielded colorless crystals in 60% yield. The molecular structurewas determined by single crystal X-ray diffraction and the [B(N3)4]- anionwas shown to possess S4 symmetry.

Sign in / Sign up

Export Citation Format

Share Document