scholarly journals Influence of Lead on the Interpretation of Bone Samples with Laser-Induced Breakdown Spectroscopy

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Abdolhamed Shahedi ◽  
Esmaeil Eslami ◽  
Mohammad Reza Nourani
Keyword(s):  
Plasma Temperature ◽  
Laser Induced Breakdown Spectroscopy ◽  
Plasma Parameters ◽  
Time Duration ◽  
Laboratory Rats ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Group A ◽  
Atomic Lines ◽  
Group B

This study is devoted to tracing and identifying the elements available in bone sample using Laser-Induced Breakdown Spectroscopy (LIBS). The bone samples were prepared from the thigh of laboratory rats, which consumed 325.29 g/mol lead acetate having 4 mM concentration in specified time duration. About 76 atomic lines have been analyzed and we found that the dominant elements are Ca I, Ca II, Mg I, Mg II, Fe I, and Fe II. Temperature curve and bar graph were drawn to compare bone elements of group B which consumed lead with normal group, group A, in the same laboratory conditions. Plasma parameters including plasma temperature and electron density were determined by considering Local Thermodynamic Equilibrium (LTE) condition in the plasma. An inverse relationship has been detected between lead absorption and elements like Calcium and Magnesium absorption comparing elemental values for both the groups.

Gold Nanoparticle-Enhanced Laser-Induced Breakdown Spectroscopy and Three-Dimensional Contour Imaging of an Aluminum Alloy

2020 ◽  
pp. 000370282097304
Author(s):  
Amal A. Khedr ◽  
Mahmoud A. Sliem ◽  
Mohamed Abdel-Harith
Keyword(s):  
Gold Nanoparticles ◽  
Aluminum Alloy ◽  
Three Dimensional ◽  
Plasma Temperature ◽  
Spectral Lines ◽  
Laser Induced Breakdown Spectroscopy ◽  
Al Alloy ◽  
Boltzmann Plot ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown

In the present work, nanoparticle-enhanced laser-induced breakdown spectroscopy was used to analyze an aluminum alloy. Although LIBS has numerous advantages, it suffers from low sensitivity and low detection limits compared to other spectrochemical analytical methods. However, using gold nanoparticles helps to overcome such drawbacks and enhances the LIBS sensitivity in analyzing aluminum alloy in the current work. Aluminum was the major element in the analyzed samples (99.9%), while magnesium (Mg) was the minor element (0.1%). The spread of gold nanoparticles onto the Al alloy and using a laser with different pulse energies were exploited to enhance the Al alloy spectral lines. The results showed that Au NPs successfully improved the alloy spectral lines intensity by eight times, which could be useful for detecting many trace elements in higher matrix alloys. Under the assumption of local thermodynamic equilibrium, the Boltzmann plot was used to calculate the plasma temperature. Besides, the electron density was calculated using Mg and H lines at Mg(I) at 285.2 nm and Hα(I) at 656.2 nm, respectively. Three-dimensional contour mapping and color fill images contributed to understanding the behavior of the involved effects.

Measurement of Plasma Parameters of Fe-Lines in Lipstick Using Laser-Induced Breakdown Spectroscopy

2021 ◽  
Vol 19 (10) ◽  
pp. 01-07
Author(s):  
M.H. Asmaa ◽  
Sami A. Habana
Keyword(s):  
Electron Temperature ◽  
Debye Length ◽  
Nuclear Data ◽  
Laser Induced Breakdown Spectroscopy ◽  
Current Investigation ◽  
Plasma Parameters ◽  
Data Set ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Business Sectors

Electron thickness and temperature of laser prompted Iron plasma boundaries, among different boundaries, were estimated. Plasma was delivered through the connection of high pinnacle power Nd: YAG laser at the key frequency of 1064 nm with a pellet target contains a limited quantity of lipstick from nearby business sectors. Lines from Fe II at 238.502 nm, Fe II at 254.904 nm, Fe II at 262.370 nm, Fe II at 286.545 nm and Fe I at 349.779 nm were utilized to assess the plasma boundaries. The current investigation was completed to assess electron temperature (Te), electron thickness (ne), plasma recurrence, Debye length and Debye number (ND). Laser-incited breakdown spectroscopy LIBS method was used for examining and deciding ghastly discharge lines. ID of change lines from all spectra was completed by contrasting ghostly lines and NIST nuclear data set.

Influence of sample temperature on the laser-induced breakdown spectroscopy of a molybdenum–tungsten alloy

2019 ◽  
Vol 34 (12) ◽  
pp. 2378-2384 ◽  
Author(s):  
Ran Hai ◽  
Zhonglin He ◽  
Ding Wu ◽  
Weina Tong ◽  
Harse Sattar ◽  
...  
Keyword(s):  
Laser Ablation ◽  
Electron Density ◽  
Emission Intensity ◽  
Plasma Temperature ◽  
Sample Temperature ◽  
Tungsten Alloy ◽  
Laser Induced Breakdown Spectroscopy ◽  
Spectral Emission ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown

During laser ablation, the spectral emission intensity, plasma temperature and electron density increased significantly with increasing sample temperature.

scholarly journals Magnetic field effect on laser-induced breakdown spectroscopy and surface modifications of germanium at various fluences

2017 ◽  
Vol 35 (1) ◽  
pp. 159-169 ◽  
Author(s):  
H. Iftikhar ◽  
S. Bashir ◽  
A. Dawood ◽  
M. Akram ◽  
A. Hayat ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electron Temperature ◽  
Surface Modifications ◽  
Laser Induced Breakdown Spectroscopy ◽  
Excitation Temperature ◽  
Number Density ◽  
Plasma Parameters ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
The Magnetic Field

AbstractThe effect of the transverse magnetic field on laser-induced breakdown spectroscopy and surface modifications of germanium (Ge) has been investigated at various fluences. Ge targets were exposed to Nd: YAG laser pulses (1064 nm, 10 ns, 1 Hz) at different fluences ranging from 3 to 25.6 J/cm2 to generate Ge plasma under argon environment at a pressure of 50 Torr. The magnetic field of strength 0.45 Tesla perpendicular to the direction of plasma expansion was employed by using two permanent magnets. The emission spectra of laser-induced Ge plasma was detected by the laser-induced breakdown spectroscopy system. The electron temperature and number density of Ge plasma are evaluated by using the Boltzmann plot and stark broadening methods, respectively. The variations in emission intensity, electron temperature (Te), and number density (ne) of Germanium plasma are explored at various fluences, with and without employment of the magnetic field. It is observed that the magnetic field is responsible for significant enhancement of both excitation temperature and number density at all fluences. It is revealed that an excitation temperature increases from Te,max,without B = 16,190 to Te,max,with B = 20,123 K. Similarly, the two times enhancement in the electron density is observed from ne,max,without B = 2 × 1018 to ne,max,with B = 4 × 1018 cm−3. The overall enhancement in Ge plasma parameters in the presence of the magnetic field is attributed to the Joule heating effect and adiabatic compression. With increasing fluence both plasma parameters increase and achieve their maxima at a fluence of 12.8 J/cm2 and then decrease. In order to correlate the plasma parameters with surface modification, scanning electron microscope analysis of irradiated Ge was performed. Droplets and cones are formed for both cases. However, the growth of ridges and distinctness of features is more pronounced in case of the absence of the magnetic field; whereas surface structures become more diffusive in the presence of the magnetic field.

Laser-Induced Breakdown Spectroscopy for the On-Line Multielement Analysis of Highly Radioactive Glass Melt. Part I: Characterization and Evaluation of the Method

2002 ◽  
Vol 56 (4) ◽  
pp. 437-448 ◽  
Author(s):  
Jong-Il Yun ◽  
Reinhardt Klenze ◽  
Jae-Il Kim
Keyword(s):  
Spectral Range ◽  
Liquid Waste ◽  
Plasma Temperature ◽  
Multielement Analysis ◽  
Laser Induced Breakdown Spectroscopy ◽  
High Level Liquid Waste ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
On Line ◽  
Echelle Spectrometer

Laser-induced breakdown spectroscopy (LIBS) is presented for the on-line multielement analysis of molten radioactive glass at a simulated vitrification process of high level liquid waste (HLLW). A plasma plume is produced by focusing the third harmonic of a Nd: YAG laser (λ = 355 nm) onto the glass melt surface at 1200 °C, and the plasma emission is guided via optical fiber and is characterized by an echelle spectrometer for the spectral range from 200 to 780 nm with a resolution of ±0.01 nm. Compared to a Czerny–Turner spectrometer, the echelle spectrometer appears distinctively superior for its broad operational spectral range and high resolution. The laser-induced plasma is found as optically thin and locally in thermodynamic equilibrium (LTE) as characterized by measuring the electron density and plasma temperature. The matrix temperature effect on the spectral emission is observed as significant, increasing the emission line intensities with increasing temperature, but differently from element to element. The applicability of LIBS is demonstrated on a laboratory scale with an inactive simulated HLLW glass melt for various analytical characteristics concerned.

scholarly journals Determination of Species Concentrations of Ti-6Al-4V Titanium Alloys using Calibration Free Laser Induced Breakdown Spectroscopy

2018 ◽  
Vol 3 (8) ◽  
pp. 50 ◽  
Author(s):  
Tagreed K. Hamad ◽  
Hussein Thamer Salloom
Keyword(s):  
Energy Levels ◽  
Surface Hardness ◽  
Plasma Temperature ◽  
Hardness Test ◽  
Spectral Lines ◽  
Laser Induced Breakdown Spectroscopy ◽  
Boltzmann Plot ◽  
Breakdown Spectroscopy ◽  
Laser Induced Breakdown ◽  
Calibration Free

In this study, Calibration-free Laser-induced breakdown spectroscopy (CF-LIBS) was applied to quantitatively analyze the elemental composition of Ti-6Al-4V titanium based alloy samples with no need for matrix-matched calibration procedure. Nd:YAG pulsed laser operating at a wavelength of 1064 nm was focused onto the sample to generate plasma. The spectrum of plasma was recorded using spectrophotometer then compared to NIST spectral lines to determine characteristic wavelengths, energy levels and other spectroscopic parameters. The values of plasma temperature obtained using Boltzmann plot for four examined samples ranged from 7439 to 6826 K while the electron density for each element was determined using Boltzmann-Saha equation. The concentration of Ti, Al, V and Fe has been determined and were within the samples nominal concentrations obtained from XRF analysis.  The calculated average relative errors of Ti, Al, V and Fe were 0.39%, 4.38%, 4.94 % and 8.2 %, respectively. Finally, there was a direct proportionality relation between the ratio of ionic to neutral emission lines of Ti for four samples and the surface hardness values measured mechanically using Vickers hardness test. The ratio at   had the best linear regression value (R2=0.95) which indicates the best correlation with surface hardness.

Sign in / Sign up

Export Citation Format

Share Document