scholarly journals Understanding Pedestrian Interactive Behaviors under the Different Level of Services on Stairways

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Jianhong Ye ◽  
Xiaonian Shan ◽  
Xiaohong Chen ◽  
Mengxiao Yu
Keyword(s):  
Service Evaluation ◽  
Level Of Service ◽  
Field Observations ◽  
Highway Capacity ◽  
Metro Station ◽  
Highway Capacity Manual ◽  
Pedestrian Traffic ◽  
Similarities And Differences ◽  
Interactive Behaviors ◽  
Main Factor

Stairways serve as important walking facilities for pedestrians, especially in metro stations, but researches of pedestrian traffic on stairways are not sufficient. This paper investigates pedestrian interactive behaviors (PIBs) under the different level of services (LOS) on stairways, including overtaking behavior and evasive behavior on stairways. Macro and micro indicators are proposed and calculated based on field observation collected from two stairway flights in a certain metro station in Shanghai, China. Results of macro indicators reveal that the characteristics of overtaking behavior and evasive behavior have both similarities and differences. As for similarities, neither of these two types of behaviors would occur under extremely low or high densities, representing LOS A or LOS F. Under other ranges of density, occurrence intensities of pedestrian interactive behaviors on stairways are different. Overtaking behavior intensity shows a rapid increase trend with the density from low to medium, while evasive behavior intensity keeps a certain value. Results of micro indictors show that the available space for overtaking behavior and evasive behavior is the main factor contributing to the above similarities and differences. Characteristics of PIBs under the different LOS present in highway capacity manual are discussed based on field observations. Findings of this research are helpful to understand the knowledge of PIBs on stairways for a better stairway traffic design and level of service evaluation.

scholarly journals Level of Service Evaluation Methods: Possible Adaptation for Lithuania

2020 ◽  
Vol 15 (2) ◽  
pp. 145-157
Author(s):  
Sandra Volosenko ◽  
Alfredas Laurinavičius
Keyword(s):  
Road Traffic ◽  
Quantitative Measure ◽  
Service Evaluation ◽  
Level Of Service ◽  
Highway Capacity ◽  
Factors Affecting ◽  
Operational Conditions ◽  
Highway Capacity Manual ◽  
The Road ◽  
Traffic Regulation

Level of Service is a quantitative measure to characterize operational conditions within a traffic stream. There is a set of factors affecting the Level of Service. These factors describe geometric parameters of the road, traffic conditions, traffic regulation conditions and base conditions. In this article, the Level of Service as a criterion for operational quality is described. Level of Service factors and performance measures are described on the basis of Highway Capacity Manual considering verifications done by countries for their own road conditions. German Highway Capacity Manual (HBS) and Highway Capacity Manual are compared for the purpose of possible adaptation for Lithuania.

Uncertainty in Operational Analysis of Two-Lane Highways

2002 ◽  
Vol 1802 (1) ◽  
pp. 105-114 ◽  
Author(s):  
R. Tapio Luttinen
Keyword(s):  
Input Data ◽  
Travel Speed ◽  
Level Of Service ◽  
Model Parameters ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Operational Analysis ◽  
Percent Time ◽  
Different Types ◽  
Percent Time Spent Following

The Highway Capacity Manual (HCM) 2000 provides methods to estimate performance measures and the level of service for different types of traffic facilities. Because neither the input data nor the model parameters are totally accurate, there is an element of uncertainty in the results. An analytical method was used to estimate the uncertainty in the service measures of two-lane highways. The input data and the model parameters were considered as random variables. The propagation of error through the arithmetic operations in the HCM 2000 methodology was estimated. Finally, the uncertainty in the average travel speed and percent time spent following was analyzed, and four approaches were considered to deal with uncertainty in the level of service.

Comparison of Planning and Operational Analysis Procedures for Signalized Intersections from the Highway Capacity Manual

1996 ◽  
Vol 1555 (1) ◽  
pp. 59-64
Author(s):  
Mark R. Virkler ◽  
Shashi Gannavaram ◽  
Anand Ramabhadran
Keyword(s):  
Level Of Service ◽  
Signal Timing ◽  
Highway Capacity ◽  
Operational Procedure ◽  
Highway Capacity Manual ◽  
Operational Analysis ◽  
Planning Procedure ◽  
Adjustment Factors ◽  
Cycle Lengths ◽  
Traffic Signal Timing

The 1994 update of the Highway Capacity Manual (HCM) includes a planning procedure to estimate the capacity condition of a signalized intersection (Xcm). The planning method results can also be extended to a planning application of the more data-intensive HCM operational procedure to estimate intersection critical flow-to-capacity ratio (Xc) and level of service with only planning-level data. Both the planning procedure and the planning application of the operational procedure involve default adjustment factors and synthesized traffic signal timing (called the “default signal timing”). Data from 166 Missouri intersections were used to determine how well the planning approaches predict operational analysis results. In general, the default signal timings had shorter cycle lengths than the timing plans used at pretimed signals. The shorter cycle lengths led to slightly higher flow-to-capacity ratios, since a higher proportion of each cycle was devoted to lost time. The default signal timings also had more equal flow-to-capacity ratios within critical lane groups. The shorter cycle lengths and more equal flow-to-capacity ratios led to a predicted level of service that was the same or better than that calculated for actual conditions. For the subject intersections, locally calibrated default adjustment factors yielded better predictions of flow-to-capacity ratios and level of service than the HCM defaults. The planning value for Xcm was often less than the actual Xc for operational analysis of actual conditions. This was to be expected since Xcm is based on the maximum allowable cycle length. The HCM planning procedure is expected to receive wide use in a variety of planning and design applications. Calibration of appropriate local default values should improve the accuracy of the planning procedure results.

scholarly journals A Novel Methodology for Estimating the Capacity and Level of Service for the New Mega Elliptical Roundabout Intersection

2020 ◽  
Vol 2020 ◽  
pp. 1-18 ◽  
Author(s):  
Ahmed I. Z. Mohamed ◽  
Yusheng Ci ◽  
Yiqiu Tan
Keyword(s):  
Geometric Design ◽  
Level Of Service ◽  
Highway Capacity ◽  
Operation Performance ◽  
Highway Capacity Manual ◽  
Federal Highway ◽  
Green Book ◽  
Traffic Operation ◽  
Gap Acceptance Theory ◽  
Better Than

Mega elliptical roundabout is a new intersection on rural multilane highways. This intersection was developed in a previous paper using simulation data, and the authors found that it is better than interchange (full cloverleaf) in most scenarios of traffic flow. Basically, there are no guidelines or procedures for designing mega elliptical roundabout in AASHTO Green Book, Federal Highway Administration guides, and Highway Capacity Manual. Thus, the purpose of this study is to analyze the traffic operation performance and propose a methodology for calculating the capacity of mega elliptical roundabout and also the level of service by gap acceptance theory. Moreover, this research studied the influence of different values of truck ratios and also different values of a major highway speed on geometric design and traffic operation performance for mega elliptical roundabout. To validate the thoroughness of the proposed methodology, VISSIM simulations were conducted. This research will assist practitioners in determining the appropriate geometric design, assessing mega elliptical roundabout intersections, and making comparisons with other alternatives.

scholarly journals Vehicle and Pedestrian Level of Service in Street Designs with Elements of Shared Space

2020 ◽  
Vol 2674 (9) ◽  
pp. 1084-1096
Author(s):  
Ioannis Kaparias ◽  
Rui Wang
Keyword(s):  
Video Data ◽  
Road User ◽  
Level Of Service ◽  
Highway Capacity ◽  
Vehicle Traffic ◽  
Highway Capacity Manual ◽  
Shared Space ◽  
Before And After ◽  
Traffic Volumes

Inspired by developments in urban planning, the concept of “shared space” has recently emerged as a way of creating a better public realm. This is achieved through a range of streetscape treatments aimed at asserting the function of streets as places by facilitating pedestrian movement and lowering vehicle traffic volumes and speeds. The characteristics of streets with elements of shared space point to the conjecture that traffic conditions and road user perceptions may be different to those on streets designed according to more conventional principles, and this is likely to have an impact on the quality of service. The aim of this paper is, therefore, to perform an analysis in relation to level of service (LOS) and to investigate how this may change as a result of the implementation of street layouts with elements of shared space. Using video data from the Exhibition Road site in London during periods before and after its conversion from a conventional dual carriageway to a layout featuring several elements of shared space, changes in relation to LOS for both vehicle traffic and pedestrians are investigated, by applying the corresponding methods from the 2010 Highway Capacity Manual. The results suggest that streets with elements of shared space provide a much improved pedestrian experience, as expressed by higher LOS ratings, but without compromising the quality of vehicle traffic flow, which, in fact, also sees slight improvements.

Unsignalized Intersection Analysis: Effect of Overlapping Conflicting Traffic Flow on Minor Movement Potential Capacity

1997 ◽  
Vol 1572 (1) ◽  
pp. 86-98
Author(s):  
Christopher J. Fasching
Keyword(s):  
Traffic Flow ◽  
Level Of Service ◽  
Traffic Flows ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Capacity Estimate ◽  
Potential Capacity ◽  
Count Distribution ◽  
Intersection Analysis ◽  
Poisson Count

A particular component of two-way stop unsignalized intersection analyses as presented in the 1994 Highway Capacity Manual (HCM) is described. Specifically, advantages to minor movement capacity are evaluated where traffic flows overlap in multiple lanes. From vehicular arrival data collected by the author, it was determined that the current HCM can significantly underestimate the true potential capacity of minor movements that face multiple lanes of free-flow conflicting traffic. A modification to the HCM procedure is introduced in which an “effective” conflicting flow is calculated on the basis of “blockage” caused by individual lanes of traffic, assuming a Poisson count distribution. In every case examined (24 total), a more accurate potential capacity estimate resulted relative to that determined by the HCM procedure. The modification also resulted in a more accurate level of service in 8 of the 24 cases.

Background for HCM Section on Analysis of Performance of Roundabouts

1998 ◽  
Vol 1646 (1) ◽  
pp. 54-62 ◽  
Author(s):  
Rod Troutbeck
Keyword(s):  
Empirical Model ◽  
Level Of Service ◽  
Gap Acceptance ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Using Data ◽  
Analysis Of Performance

The background to the Highway Capacity Manual (HCM) section on the analysis of the performance of roundabouts is discussed. The paper has two main objectives: to discuss the background of different techniques used to evaluate the level of service and to describe the method included in the HCM. The paper is in two parts. In the first part, the first objective is addressed and the parameters needed to predict both delay and capacity, which in turn are used to evaluate the level of service, are described. It is concluded that the gap acceptance approach is a reasonable one when the performance of roundabouts is predicted using data from uncongested sites. If there are a significant number of roundabouts with congested approaches, an empirical model should be used. It is also concluded that the results from one country cannot be immediately transferred to another. In the second part of the paper, the recommended practice included in HCM Chapter 10 is given.

Effect of Bicycles on Capacity of Signalized Intersections

1998 ◽  
Vol 1646 (1) ◽  
pp. 87-95 ◽  
Author(s):  
D. Patrick Allen ◽  
Joseph E. Hummer ◽  
Nagui M. Rouphail ◽  
Joseph S. Milazzo
Keyword(s):  
Signalized Intersections ◽  
Signalized Intersection ◽  
Motor Vehicles ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Flow Adjustment ◽  
Conflict Zone ◽  
Pedestrian Traffic ◽  
Saturation Flow ◽  
The Impact

Although much is known about the operation of signalized intersections, little or no empirical research has been conducted regarding the effect of bicycles on signalized intersection capacity. The purpose of this study was to accurately quantify the effects of bicycles on signalized intersection capacity through the videotaping of several intersections that had significant bicycle traffic. Through the videotaping of intersections in Davis, California, and Gainesville, Florida, a relationship was determined between bicycle volumes and the percent of the green phase during which bicycle traffic occupies a conflict zone between bicycles and right-turning motor vehicles. It was also determined that one can ascertain the total net occupancy due to pedestrians and bicycles by taking the overlapping effects between bicycles and pedestrians into account. Using this total occupancy due to bicycles and pedestrians, one can calculate a saturation flow adjustment factor ( fRph) that reflects the reduction in saturation flow, and ultimately lane group capacity, for lane groups containing vehicles making permissive right turns in the presence of bicycles and pedestrians. The proposed procedure yields lower saturation flows and capacities than the current Highway Capacity Manual (HCM) procedure. In other words, on the basis of empirical data, when combined with pedestrian effects, the impact of bicycles on the saturation flow of lane groups containing right-turning vehicles is probably more detrimental than previously believed, and the capacities of intersections with significant bicycle and pedestrian traffic may be overestimated by using the current HCM procedures.

Freeway Weaving: Comparison of Highway Capacity Manual 2000 and Dutch Guidelines

2003 ◽  
Vol 1852 (1) ◽  
pp. 10-18 ◽  
Author(s):  
M. M. Minderhoud ◽  
L. Elefteriadou Elefteriadou
Keyword(s):  
United States ◽  
Sensitivity Analysis ◽  
The United States ◽  
Level Of Service ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Additional Variable ◽  
Different Types ◽  
The U.S ◽  
Capacity Estimates

Weaving sections are a commonly adopted freeway facility both in the United States and in Europe. Knowledge about the capacity and level of service achievable on different types of weaving segments is necessary for the design and management of freeways. Guidelines such as those of the U.S. Highway Capacity Manual (HCM) provide capacity values for different weaving configuration types. The Dutch guidelines for the design of weaving segments are compared with those of the U.S. HCM. Differences between their respective approaches are identified, and a comparison of capacity values is conducted. It was found that there are large differences in capacity estimates for certain weaving configuration types. The results of a sensitivity analysis explain these differences in capacity values to a large extent. This analysis showed that it is important to consider the weaving proportions per leg. Currently, neither the HCM nor the Dutch approach considers different weaving flows per incoming leg. The introduction of an additional variable into the calculation procedure that takes into account the presence of asymmetrical weaving flows is recommended.

scholarly journals Travel Time Estimation on Urban Street Segment

2018 ◽  
Vol 30 (1) ◽  
pp. 115-120 ◽  
Author(s):  
Jelena Kajalić ◽  
Nikola Čelar ◽  
Stamenka Stanković
Keyword(s):  
Travel Time ◽  
Time Estimation ◽  
Travel Speed ◽  
Degree Of Saturation ◽  
Level Of Service ◽  
Travel Time Estimation ◽  
Highway Capacity ◽  
Local Conditions ◽  
Highway Capacity Manual ◽  
Urban Streets

Level of service (LOS) is used as the main indicator of transport quality on urban roads and it is estimated based on the travel speed. The main objective of this study is to determine which of the existing models for travel speed calculation is most suitable for local conditions. The study uses actual data gathered in travel time survey on urban streets, recorded by applying second by second GPS data. The survey is limited to traffic flow in saturated conditions. The RMSE method (Root Mean Square Error) is used for research results comparison with relevant models: Akcelik, HCM (Highway Capacity Manual), Singapore model and modified BPR (the Bureau of Public Roads) function (Dowling - Skabardonis). The lowest deviation in local conditions for urban streets with standardized intersection distance (400-500 m) is demonstrated by Akcelik model. However, for streets with lower signal density (<1 signal/km) the correlation between speed and degree of saturation is best presented by HCM and Singapore model. According to test results, Akcelik model was adopted for travel speed estimation which can be the basis for determining the level of service in urban streets with standardized intersection distance and coordinated signal timing under local conditions.

Sign in / Sign up

Export Citation Format

Share Document