scholarly journals A Study on the Slope Failure Monitoring of a Model Slope by the Application of a Displacement Sensor

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Sungyong Park ◽  
Hyuntaek Lim ◽  
Bibek Tamang ◽  
Jihuan Jin ◽  
Seungjoo Lee ◽  
...  

Many causalities and economic losses are caused by natural disasters, such as landslides and slope failures, every year. This suggests that there is a need for an early warning system to mitigate casualties and economic losses. Most of the studies on early warning systems have been carried out by predicting landslide-prone areas, but studies related to the prediction of landslide occurrence time points by the real-time monitoring of slope displacement are still insufficient. In this study, a displacement sensor and an Internet of Things (IoT) monitoring system were combined together, to monitor slope failure through cutting experiments of a real-scale model slope. Real-time monitoring of the slope movement was performed simultaneously via a low-cost, efficient, and easy-to-use IoT system. Based on the obtained displacement data, an inverse displacement analysis was performed. Finally, a slope instrumentation standard was proposed based on the slope of the inverse displacement for early evacuation before slope failure.

2015 ◽  
Vol 775 ◽  
pp. 264-267
Author(s):  
Xiao Dong Pan ◽  
Lei Zhao

Currently the settlement and deformation of factory building structure is monitored using total stations and other more conventional measuring instruments, it is difficult to reflect the health of the structure timely and accurately. In order to change the situation, we establish a set of system for real-time monitoring of deformation and safety warning. The system is formed of sensing layer, transport layer and application layer. Sensing layer is composed of static force level and biaxial inclinometer. The system can be used in dynamic real-time factory structure safety monitoring, also applied to other similar structural monitoring. This paper will study the system components and principle, early warning systems grading, calculation of real-time deformation of roof frame, laboratory test scheme and verification. Experiments showed that the system is suitable for the actual factory structure monitoring, while the choice of static force level and biaxial inclinometer of precision to meet the requirements.


2012 ◽  
Vol 446-449 ◽  
pp. 3422-3427
Author(s):  
Wang Sheng Liu ◽  
Ming Zhao

Today there is an urgent need for effective monitoring whether for old buildings or new ones. While conventional early warning system for real-time monitoring is based on safety factor, this paper proposes a new reliability-based framework to monitor the safety of RC buildings probabilistically. The framework includes modeling resistance, predicting probability distribution of load effect, calculating reliability and setting reliability index threshold. The in-situ test data enables to update the resistance model through a Bayesian process. Meanwhile, the observed monitoring data predicts the probability distribution of load effect. FORM is used to calculate the reliability because the limit state function for real-time monitoring is linear and simple. This study shows that the reliability-based early warning system is of more scientific sense in quantifying the safety and may be applied to many engineering fields.


Author(s):  
Erzsébet Győri ◽  
Arman Bulatovich Kussainov ◽  
Gyöngyvér Szanyi ◽  
Zoltán Gráczer ◽  
Kendebay Zhanabilovich Raimbekov ◽  
...  

Earthquakes are one of the most devastating natural disasters on Earth, causing sometimes huge economic losses and many human casualties. Since earthquake prediction is not yet possible, the purpose of civil protection is to reduce damage and protect human lives, in which the seismological networks of different countries play a very important role. Special applications of seismic networks are the early warning systems that can be used to protect vulnerable infrastructures using automated shutdown procedures, to stop high velocity trains and to save lives if the general public is notified about imminent strong ground shaking. In this paper, we describe the aims and operation of seismological networks, covering in more detail the early warning systems. Then we delineate the seismotectonic settings and seismicity in Hungary and Kazakhstan, furthermore, describe the operating seismological networks and the related scientific research areas with emphasis on civil protection. Hungary and Kazakhstan differ not only in the size of their territory, but also in their seismicity, therefore, in addition to the similarities, there are also significant differences between the aims and problems of their seismological networks.


2021 ◽  
Author(s):  
Thierry Hohmann ◽  
Judit Lienert ◽  
Jafet Andersson ◽  
Darcy Molnar ◽  
Peter Molnar ◽  
...  

<p><strong>Introduction</strong></p><p>Flood early warning systems (FEWS) can reduce casualties and economic losses (UNEP, 2012). The EC Horizon 2020 project FANFAR (www.fanfar.eu) aims to co-develop a FEWS in West Africa together with stakeholders, predicting streamflow and return period threshold exceedance (Andersson et al., 2020). A Multi-Criteria Decision Analysis (MCDA) indicated, that stakeholders find information accuracy especially important, among a broad set of fundamental objectives (Lienert et al., 2020). Social media have the potential to support accuracy assessment by detecting flood events (Lorini et al., 2019; de Bruijn et al., 2019) due to their large spatial coverage (Restrepo-Estrada et al., 2018). We investigated the potential of social media to assess FANFAR forecast accuracy.</p><p> </p><p><strong>Research Approach</strong></p><p>FANFAR forecasts are based on HYPE, which is a semi-distributed land-cover and sub-catchment based hydrological model (Arheimer et al., 2020). We lumped the forecasted flood risk (FFR) on a country scale and compared it to flood events detected on Twitter, using an algorithm (FEDA) developed by de Bruijn et al. (2019). FEDA detects flood-related tweet bursts based on regionally and temporally adjusted thresholds (de Bruijn et al., 2019). We compared FEDA detected events with floods from the disaster database EM-DAT (https://www.emdat.be/), to find if tweets indicate flooding. We also compared FEDA to the lumped FFR to identify false positives (FP), false negatives (FN), and true positives (TP), from which we deduced the probability of detection (POD) and false alarm rate (FAR). We further calculated the correlation of single flood-related tweets with the lumped FFR and investigated seasonality, lag, and the influence of rainfall.</p><p> </p><p><strong>Findings</strong></p><p>The detailed findings are described in Hohmann (2021). FEDA (i.e., tweets) and EM-DAT events (i.e., floods) mostly occurred in the same period. However, FEDA detected shorter and more frequent events than EM-DAT. In the Upper Niger, POD<sub>FEDA</sub> and FAR<sub>FEDA</sub> (deduced from FEDA) were of similar order of magnitude as the POD<sub>S</sub> and FAR<sub>S</sub> (deduced from streamflow) but were different in the Lower Niger region. This suggests that tweets can be employed additionally to e.g. streamflow timeseries as a complementary way to evaluate accuracy. Correlation analysis between single flood-related tweets and the lumped FFR showed no relationship. We also did not find a systematic influence of seasonality or a lagged response between tweets and FFR. The correlation coefficients between tweets and rainfall ranged from 0.1-0.9, but were mostly non-significant. This suggests that a performance assessment based on single tweets is not (yet) adequate. Also, since FEDA does not differentiate between pluvial and fluvial floods, it is less suited to assess the accuracy of FANFAR. Our findings suggest the need for inclusion of other factors into the performance assessment of FEWSs, such as regional thresholds to identify TP, FP, and FN. Also, rainfall causing pluvial flooding must be considered. Finally, our approach is limited to Twitter. Further research should assess the potential of e.g. Facebook to be included in FEWS performance assessment. The question whether social media, FEWSs, or EM-DAT are correct remains, and is in our opinion best addressed by employing multiple data sources.</p>


2010 ◽  
Vol 10 (2) ◽  
pp. 181-189 ◽  
Author(s):  
C. Falck ◽  
M. Ramatschi ◽  
C. Subarya ◽  
M. Bartsch ◽  
A. Merx ◽  
...  

Abstract. GPS (Global Positioning System) technology is widely used for positioning applications. Many of them have high requirements with respect to precision, reliability or fast product delivery, but usually not all at the same time as it is the case for early warning applications. The tasks for the GPS-based components within the GITEWS project (German Indonesian Tsunami Early Warning System, Rudloff et al., 2009) are to support the determination of sea levels (measured onshore and offshore) and to detect co-seismic land mass displacements with the lowest possible latency (design goal: first reliable results after 5 min). The completed system was designed to fulfil these tasks in near real-time, rather than for scientific research requirements. The obtained data products (movements of GPS antennas) are supporting the warning process in different ways. The measurements from GPS instruments on buoys allow the earliest possible detection or confirmation of tsunami waves on the ocean. Onshore GPS measurements are made collocated with tide gauges or seismological stations and give information about co-seismic land mass movements as recorded, e.g., during the great Sumatra-Andaman earthquake of 2004 (Subarya et al., 2006). This information is important to separate tsunami-caused sea height movements from apparent sea height changes at tide gauge locations (sensor station movement) and also as additional information about earthquakes' mechanisms, as this is an essential information to predict a tsunami (Sobolev et al., 2007). This article gives an end-to-end overview of the GITEWS GPS-component system, from the GPS sensors (GPS receiver with GPS antenna and auxiliary systems, either onshore or offshore) to the early warning centre displays. We describe how the GPS sensors have been installed, how they are operated and the methods used to collect, transfer and process the GPS data in near real-time. This includes the sensor system design, the communication system layout with real-time data streaming, the data processing strategy and the final products of the GPS-based early warning system components.


Geosciences ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 62 ◽  
Author(s):  
Andrea Segalini ◽  
Andrea Carri ◽  
Alessandro Valletta ◽  
Maurizio Martino

During recent years, the availability of innovative monitoring instrumentation has been a fundamental component in the development of efficient and reliable early warning systems (EWS). In fact, the potential to achieve high sampling frequencies, together with automatic data transmission and elaboration are key features for a near-real time approach. This paper presents a case study located in Central Italy, where the realization of an important state route required a series of preliminary surveys. The monitoring system installed on site included manual inclinometers, automatic modular underground monitoring system (MUMS) inclinometers, piezometers, and geognostic surveys. In particular, data recorded by innovative instrumentation allowed for the detection of major slope displacements that ultimately led to the landslide collapse. The implementation of advanced tools, featuring remote and automatic procedures for data sampling and elaboration, played a key role in the critical event identification and prediction. In fact, thanks to displacement data recorded by the MUMS inclinometer, it was possible to forecast the slope failure that was later confirmed during the following site inspection. Additionally, a numerical analysis was performed to better understand the mechanical behavior of the slope, back-analyze the monitored event, and to assess the stability conditions of the area of interest.


Sign in / Sign up

Export Citation Format

Share Document