scholarly journals Analysis of Influence Law of Burial Depth on Surrounding Rock Deformation of Roadway

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Hai Wu ◽  
Xiaokang Wang ◽  
Weijian Yu ◽  
Weijun Wang ◽  
Zizheng Zhang ◽  
...  
Keyword(s):  
Surrounding Rock ◽  
Rock Deformation ◽  
Burial Depth ◽  
Monitoring Point ◽  
Working Face ◽  
Different Depths ◽  
Roadway Deformation ◽  
Two Stages ◽  
Surrounding Rock Deformation ◽  
Deformation Increment

In order to study the influence of burial depth on the roadway deformation, the deformation data of more than 100 roadways were collected and classified. The results have shown that, in the first 5 days of new digging roadways, the surrounding rock deformation is basically not affected by the buried depth. The influence period of roadway deformation with different depths is the same, namely, the severe period (1∼15 days), the mitigation period (15∼35 days), and the stable period (35∼50 days). With the increase in depth, the surrounding rock deformation increment of new digging roadways with a depth of 300∼600 m is much larger than that of 600∼900 m. Within 100 m of the working face from the monitoring point, the deformation of mining roadways can be divided into two stages: severe impact (10∼60 m) and stable impact (60∼100 m). With the increase in depth, the deformation increment of the surrounding rock in the mining roadways with a depth of 600∼900 m is much larger than that of 300∼600 m. The surrounding rock deformation increases with the increase in the width and height of roadways and gradually increases with the decrease in the strength of rock mass.

Surrounding Rock Convergence Rule along the Working Face Tendency of Recovery Room

2014 ◽  
Vol 962-965 ◽  
pp. 352-356
Author(s):  
Zhigang Wu ◽  
Wen Zhou Li
Keyword(s):  
Stress Distribution ◽  
Recovery Room ◽  
Coal Pillar ◽  
Surrounding Rock ◽  
Rock Deformation ◽  
Working Face ◽  
Deformation Mechanics ◽  
Surrounding Rock Deformation ◽  
Moving Speed

Recovery room could ensure the returning safety of working face equipment, improve mining and moving speed efficiency. Surrounding rock of working face will be distributed after recovery room driving, surrounding rock convergence drastically, and mining influence surrounding rock of recovery room also. Stress distribution around recovery room complex. Surrounding rock deformation rule along tendency of working face was studied by filed measurement in Sihe cola mine of the Jincheng coal district in China. It reveals surrounding rock deformation mechanics during coal pillar of working face through.

scholarly journals Study on strata behavior law of deep inclined coal seam

2021 ◽  
Vol 248 ◽  
pp. 03031
Author(s):  
Chen Zhengwen
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Surrounding Rock ◽  
Rock Deformation ◽  
Coal Seams ◽  
Working Face ◽  
Support Resistance ◽  
Strata Behavior ◽  
The Law ◽  
Surrounding Rock Deformation

In order to understand and grasp the law of roof pressure on the working face of deep inclined coal seams, the law of support resistance distribution, the law of leading support stress distribution and the law of surrounding rock deformation of the two roadways, the 94101 working face of Zhangshuanglou Coal Mine was taken as the engineering background. Through a combination of field measurement, numerical simulation, theoretical analysis, etc, this paper analyzes the laws of roof migration and rock pressure manifestation in deep inclined coal seams.

scholarly journals Model Test and Numerical Study on Surrounding Rock Deformation and Overburden Strata Movement Law of Gob-Side Entry Retaining via Roof Cutting

Minerals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 458 ◽  
Author(s):  
Daoyong Zhu ◽  
Jiong Wang ◽  
Weili Gong ◽  
Zheng Sun
Keyword(s):  
Model Test ◽  
Surrounding Rock ◽  
Rock Deformation ◽  
Shanxi Province ◽  
Beam Model ◽  
Physical Test ◽  
Strata Movement ◽  
Deformation Equation ◽  
Surrounding Rock Deformation ◽  
Overlying Strata

The effects of roof cutting techniques on the movement law of the overlying strata and deformation features of the surrounding rock in gob-side entry retaining mines were studied using 200 working faces of the Dianping coal mine in Shanxi Province. Using a mechanical analysis, a cantilever beam model formed by roof cutting was used to derive a deformation equation. The physical model test based on the field prototype revealed an asymmetrically distributed displacement curve and reduced collapse displacement when the rock stratum was far from the cutting seam. Outside of the roof cutting height, the collapse of the overlying strata gradually reached a symmetric distribution with increasing height. The deformation of the retained roadway was mainly concentrated on the roof, and the maximum deformation was 14 mm near the roof cutting side. A numerical simulation of the original size of the model test proved that the laws of strata movement and surrounding rock deformation were consistent with the physical test results. Finally, field measurements were performed, which verified the rationality of this study.

Study on the Deformation Forecasting for the Tunnel Surrounding Rock Using the Neural Network

2013 ◽  
Vol 353-356 ◽  
pp. 828-832
Author(s):  
Guo Feng Wang ◽  
Wen Zhao ◽  
Yong Ping Guan ◽  
Lei Liang
Keyword(s):  
Neural Network ◽  
Maximum Error ◽  
Mining Area ◽  
Surrounding Rock ◽  
Rock Deformation ◽  
The Neural Network ◽  
Sublevel Caving ◽  
Iron Mine ◽  
Set Up ◽  
Surrounding Rock Deformation

The non-pillar sublevel caving method is used in Iron Mine in Banshi. In the mining area, there are many folds and faults, the inclination of ore body changes greatly, and ore and rock are fragmentized. The tunnel often collapsed and the surrounding rock deformation was getting large during the construction stage. Using the data of tunnel surrounding rock deformation, we adopt the neural network method to set up the mapping relation between the tunnel surrounding rock deformation and the project factors, including tunnel deepness, tunnel dimension, measuring time and surrounding rock quality. The analyzing results show that the maximum error between the forecast and the testing data is 13%, which indicates that this method is useful and feasible to the mining engineering. Key words: rock pressure; measure, deformation of the tunnel surrounding rock; neural network; data normalization; mapping

Study on the Terminal Line Reasonable Position of Two Coal Seam under the Down-Protective Layer Pressure-Relieved Mining

2013 ◽  
Vol 295-298 ◽  
pp. 2913-2917
Author(s):  
Xiang Yang Zhang ◽  
Min Tu
Keyword(s):  
Coal Seam ◽  
Coal Pillar ◽  
Protective Layer ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Rock Properties ◽  
Engineering Practice ◽  
Working Face ◽  
Roadway Deformation ◽  
The Impact

In order to study the stress distribution and its dynamic influence law while the protective layer mining, based on the transfer law of mining-induced stress in the coal seam floor and in front of the working face, using numerical simulation software to simulate the surrounding rock stress under the different pillar width mining conditions, and carried through the roadway deformation engineering practice observations. It is shown that reserved 110m coal pillar could weaken the impact on the front of the floor tunnel under the protective layer mining process. When the top liberated layer mining to reduce the impact of mining stress superposition, it should avoid the terminal lines on the two coal seams at the same location and may be staggered at least about 30m ~ 50m. And it obtained that the roadway deformation not only by mining impact, but also considering the geological environment surrounding rock conditions, tunnel position in which layers of rock, rock properties and other factors. The research guided the engineering practice successfully.

Sign in / Sign up

Export Citation Format

Share Document