scholarly journals Structure-Acoustic Coupling Analysis of Vibration and Underwater Acoustic Radiation of a Ring-Stiffened Conical Shell

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Qingtao Gong ◽  
Zhanyang Chen ◽  
Hongbin Gui ◽  
Dong Yu

The underwater acoustic radiation of the submarine power cabin has recently become a hot topic in the industry and also in the academia. In this article, the vibration and underwater acoustic radiation of a ring-stiffened conical shell with bases are investigated numerically by means of the combination of the finite element method and boundary element method. The acoustic radiation field is obtained by the traditional acoustic field model and ISO acoustic field model, respectively. A series of numerical examples are given, and the results are compared. Besides, the sound pressure at different positions with frequency is further studied. It is shown that the sound radiated by the structure mainly propagates to the side directions of the shell and propagates relatively less to the front side and the rear side.

Author(s):  
Wakae Kozukue ◽  
Ichiro Hagiwara ◽  
Yasuhiro Mohri

In this paper the reduction analysis of the so-called ‘booming noise’, which occurs due to the resonance of a vehicle cabin, is tried to carry out by using the finite element method. For the reduction method a Helmholtz resonator, which is well known in the field of acoustics, is attached to a vehicle cabin. The resonance frequency of a Helmholtz resonator can be varied by adjusting the length of its throat. The simply shaped Helmholtz resonator is set up to the back of the cabin according to the resonance frequency of the cabin and the frequency response of the sound pressure at a driver’s ear position is calculated by using the finite element method. It is confirmed that the acoustical characteristics of the cabin is changed largely by attaching the resonator and the sound quality is quite varied. The resonance frequency of the resonator can be considered to follow the acoustical characteristics of the cabin by using an Origami structure as a throat. So, in the future the analysis by using an Origami structure Helmholtz resonator should be performed.


2014 ◽  
Vol 599-601 ◽  
pp. 922-926
Author(s):  
Guo Liang Xu ◽  
Qi Wei He ◽  
Shao Chun Ding ◽  
Hai Bo Wan

To analyze effects of quay environment on the AUV radiated acoustic field test, the PNAH (PNAH: planar near-field acoustical holography) was used to simulate acoustic field. By simulating the free and non-free acoustic field and comparing amplitudes and angles of complex sound pressure, Analyze effects of quay wall and seabed reflection on the AUV radiated acoustic field test to determine the standard of quay wall and seabed environment which meets testing. The work would provide a certain reference for the AUV radiated acoustic field test.


2010 ◽  
Vol 439-440 ◽  
pp. 692-697
Author(s):  
Li Jun Li ◽  
Xian Yue Gang ◽  
Hong Yan Li ◽  
Shan Chai ◽  
Ying Zi Xu

For acoustic radiation of open thin-walled structure, it was difficult to analyze directly by analytical method. The problem could be solved by several numerical methods. This paper had studied the basic theory of the numerical methods as FEM (Finite Element Method), BEM (Boundary Element Method) and IFEM (Infinite Element Method), and the numerical methods to solve open structure radiation problem. Under the premise of structure-acoustic coupling, this paper analyzed the theory and flow of the methods on acoustic radiation of open structure, including IBEM (Indirect Boundary Element Method), DBEM (Direct Boundary Element Method) coupling method of interior field and exterior field, FEM and BEM coupling method, FEM and IFEM coupling method. This paper took the open structure as practical example, and applied the several methods to analyze it, and analyzed and compared the several results to get relevant conclusions.


2011 ◽  
Vol 689 ◽  
pp. 279-316 ◽  
Author(s):  
Xuesong Wu

AbstractIn two previous papers (Wu, J. Fluid Mech., vol. 453, 2002, p. 289, and Wu & Hogg, J. Fluid Mech., vol. 550, 2006, p. 307), a formal asymptotic procedure was developed to calculate the sound radiated by unsteady boundary-layer flows that are described by the triple-deck theory. That approach requires lengthy calculations, and so is now improved to construct a simpler composite theory, which retains the capacity of systematically identifying and approximating the relevant sources, but also naturally includes the effect of mean-flow refraction and more importantly the back action of the emitted sound on the source itself. The combined effect of refraction and back action is represented by an ‘impedance coefficient’, and the present analysis yields an analytical expression for this parameter, which was usually introduced on a semi-empirical basis. The expression indicates that for Mach number $M= O(1)$, the mean-flow refraction and back action of the sound have a leading-order effect on the acoustic field within the shallow angles to the streamwise directions. A parametric study suggests that the back effect of sound is actually appreciable in a sizeable portion of the acoustic field for $M\gt 0. 5$, becomes more pronounced, and eventually influences the entire acoustic field in the transonic limit. In the supersonic regime, the acoustic field is characterized by distinctive Mach-wave beams, which exert a leading-order influence on the source. The analysis also indicates that acoustic radiation in the subsonic and supersonic regimes is fundamentally different. In the subsonic regime, the sound is produced by small-wavenumber components of the hydrodynamic motion, and can be characterized by acoustic multipoles, whereas in the supersonic regime, broadband finite-wavenumber components of the hydrodynamic motion contribute and the concept of a multipolar source becomes untenable. The global acoustic feedback loop is investigated using a model consisting of two well-separated roughness elements, in which the sound wave emitted due to the scattering of a Tollmien–Schlichting (T–S) wave by the downstream roughness propagates upstream and impinges on the upstream roughness to regenerate the T–S wave. Numerical calculations suggest that at high Reynolds numbers and for moderate roughness heights, the long-range acoustic coupling may lead to global instability, which is characterized by self-sustained oscillations at discrete frequencies. The dominant peak frequency may jump from one value to another as the Reynolds number or the distance between the roughness elements is varied gradually.


2020 ◽  
Vol 28 (04) ◽  
pp. 2050004
Author(s):  
Buchao An ◽  
Chao Zhang ◽  
Dejiang Shang ◽  
Yan Xiao ◽  
Imran Ullah Khan

A combined Finite Element Method with Normal Mode (FEM-NM) is proposed for calculation of the acoustic field radiated by a three-dimensional structural source in shallow water. The FEM is used to calculate the near range acoustic field, then the modes expansion at the vertical and azimuthal direction is performed at a certain coupling range. Hence, the true three-dimensional acoustic field at any range is obtained rapidly by the NM theory. The numerical examples show the efficiency and accuracy of this method. The coupling range and the truncation of the vertical modes hardly affect the far field results.


2002 ◽  
Vol 10 (01) ◽  
pp. 113-121 ◽  
Author(s):  
L.-X. LI ◽  
J.-S. SUN ◽  
H. SAKAMOTO

An infinite element method is proposed to help solve practical problems in engineering and extend the applicability of infinite element. Based on the Helmholtz's equation, a novel governing equation is derived in terms of the modified sound pressure. The relative boundary conditions are established and the system matrices in using the combination of conventional finite element and new infinite element are subsequently formed. As a result, the use of coarser finite element meshes is permitted for a given frequency. The effectiveness and accuracy of this method are demonstrated in application to two typical examples.


2012 ◽  
Vol 591-593 ◽  
pp. 1929-1933
Author(s):  
Ming Hui Zhao

Plate-shell structures, especially cylindrical shells and spherical shells, are widely used in engineering fields, such as aircraft and tanks, missiles, submarines, ships, hydraulic pumps, infusion pipelines and gas pipelines, and so on. These structures are usually in a fluid medium, which are related to the structure fluid-solid coupling and acoustic radiation field. As many experiments show that enclosed air in a thin walled structure, just like the violin, affects some modes of vibration significantly, air coupling between vibrating sides of the structure cannot be neglected. In order to explore the sound pressure distribution of vibrational frequencies, this paper, considering the material anisotropy, analyzes a typical complex shell structure of the violin by finite element method, including acoustic-structure coupling analysis and post-processing, especially sound pressure vibration frequency extraction. Finally, we get the conclusion that the distribution of sound pressure vibration frequency is similar to the normal distribution.


Sign in / Sign up

Export Citation Format

Share Document