scholarly journals Research on Life Extension Method of Transmission Line Intelligent Sensing System Based on Environmental Energy Harvesting

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Wanli Sun ◽  
Yu Liu ◽  
Lei Ma ◽  
Ruopu Zhang
Keyword(s):  
Energy Harvesting ◽  
Power Consumption ◽  
Transmission Line ◽  
Transmission Lines ◽  
Sensor Node ◽  
Life Extension ◽  
Configuration Model ◽  
Field Energy ◽  
Technology Application ◽  
Sensing System

In this paper, we focus on building and researching the self-power sensor system based on the tiny energy harvesting technology which can be used in the scenario of ubiquitous power Internet of Things (UPIoT) and prove the possibility and efficiency for the life extension of transmission line intelligent sensing system. Large scale of sensor in the smart grid technology application, especially in high-voltage transmission lines, is not convenient; it is worth mentioning that most of all kinds of sensor node equipment using battery power make the life of the equipment or components limited by greatly. Therefore, low power consumption, long life, no battery dependence, free maintenance, and other requirements are increasingly important to solve the difficulties of deployment and maintenance. At the same time, the problem of the battery case electricity use with low efficiency and short life of sensor node has become the bottleneck of further widely deployed wireless sensor node equipment. The power collection technology based on environmental energy can effectively handle with the problems of energy collection efficiency and management that need to be urgently solved in new application scenarios such as zero-standby power consumption devices, remote active tags, battery-free telemetry and remote control, and ultralong life sensing system. By studying various kinds of environmental energy collection technologies and utilizing the conversion and management technologies of available weak environmental energy, such as solar energy and magnetic field energy, into electric energy, this paper establishes an energy conversion test system and configuration model and verifies the feasibility of the assumption of maintenance-free for the intelligent sensing system of transmission lines.

scholarly journals Time-Multiplexed Self-Powered Wireless Current Sensor for Power Transmission Lines

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1561
Author(s):  
Hao Chen ◽  
Zhongnan Qian ◽  
Chengyin Liu ◽  
Jiande Wu ◽  
Wuhua Li ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Transmission Line ◽  
Transmission Lines ◽  
Power Transmission ◽  
Current Measurement ◽  
Current Sensor ◽  
Power Transmission Line ◽  
Power Transmission Lines ◽  
Current Sensing ◽  
Self Powered

Current measurement is a key part of the monitoring system for power transmission lines. Compared with the conventional current sensor, the distributed, self-powered and contactless current sensor has great advantages of safety and reliability. By integrating the current sensing function and the energy harvesting function of current transformer (CT), a time-multiplexed self-powered wireless sensor that can measure the power transmission line current is presented in this paper. Two operating modes of CT, including current sensing mode and energy harvesting mode, are analyzed in detail. Through the design of mode-switching circuit, harvesting circuit and measurement circuit are isolated using only one CT secondary coil, which eliminates the interference between energy harvesting and current measurement. Thus, the accurate measurement in the current sensing mode and the maximum energy collection in the energy harvesting mode are both realized, all of which simplify the online power transmission line monitoring. The designed time-multiplexed working mode allows the sensor to work at a lower transmission line current, at the expense of a lower working frequency. Finally, the proposed sensor is verified by experiments.

How Much Energy Needs for Running Energy Harvesting Powered Wireless Sensor Node?

2016 ◽  
Vol 3 (3) ◽  
Author(s):  
Fariborz Entezami ◽  
Meiling Zhu ◽  
Christos Politis
Keyword(s):  
Life Cycle ◽  
Energy Harvesting ◽  
Power Consumption ◽  
Wireless Sensors ◽  
Sensor Node ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Test Bed ◽  
Limited Energy ◽  
Energy Needs

AbstractThere is a big challenge for research and industrial engineers to apply energy harvesting powered wireless sensors for practical applications. This is because wireless sensors is very power hungry while current energy harvesting systems can only harvest very limited energy from the ambient environment. In order for wireless sensors to be operated based on the limited energy harvested, understanding of power consumption of wireless sensors is the first task for implementation of energy harvesting powered wireless sensors systems. In this research an energy consumption model has been introduced for wireless sensor nodes and the power consumption in the life cycle of wireless communication sensors, consisting of JN5148 microcontroller and custom built sensors: a 3-axial accelerometer, a temperature sensor and a light sensor, has been studied. All measurements are based on a custom-built test bed. The power required carrying out a life cycle of wireless sensing and transmission is analysed. This paper describes how to analyse the current consumption of the system in active mode and thus power Consumption for sleeping and deployed sensors mode. The results show how much energy needs to run the energy harvesting powered wireless sensor node with JN5148 microcontroller.

Wireless Vibration Sensing Without a Battery

2012 ◽  
Author(s):  
Haiying Huang ◽  
Yayu Hew
Keyword(s):  
Energy Harvesting ◽  
Power Consumption ◽  
Low Power ◽  
Strain Gauge ◽  
Sensor Node ◽  
Wireless Sensor ◽  
Low Power Consumption ◽  
Wireless Sensor Node ◽  
Signal Modulation ◽  
Ultra Low Power

This paper presents the implementation and characterization of a low power wireless vibration sensor that can be powered by a flash light. The wireless system consists of two components, namely the wireless sensor node and the wireless interrogation unit. The wireless sensor node includes a wireless strain gauge that consumes around 6 mW, a signal modulation circuit, and a light energy harvesting unit. To achieve ultra-low power consumption, the signal modulation circuit was implemented using a voltage-controlled oscillator (VCO) to convert the strain gauge output to an intermediate frequency (IF) signal, which is then used to alter the impedance of the sensor antenna and thus achieves amplitude modulation of the backscattered antenna signal. A generic solar panel with energy harvesting circuit is used to power the strain sensor node continuously. The wireless interrogation unit transmits the interrogation signal and receives the amplitude modulated antenna backscattering, which can be down-converted to recover the IF signal. In order to measure the strains dynamically, a Phase Lock Loop (PLL) circuit was implemented at the interrogator to track the frequency of the IF signal and provide a signal that is directly proportional to the measured strain. The system features ultra-low power consumption, complete wireless sensing, solar powering, and portability. The application of this low power wireless strain system for vibration measurement is demonstrated and characterized.

An Electro-Magnetic Energy Harvesting System With 190 nW Idle Mode Power Consumption for a BAW Based Wireless Sensor Node

2011 ◽  
Vol 46 (7) ◽  
pp. 1728-1741 ◽  
Author(s):  
Hannes Reinisch ◽  
Stefan Gruber ◽  
Hartwig Unterassinger ◽  
Martin Wiessflecker ◽  
Günter Hofer ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Power Consumption ◽  
Sensor Node ◽  
Magnetic Energy ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Idle Mode ◽  
Energy Harvesting System ◽  
Electro Magnetic

scholarly journals Development of an Energy-Aware Algorithm for Low Power Wireless Sensor Node Powered by Dual Energy Harvesting Sources

2019 ◽  
Vol 8 (2S6) ◽  
pp. 797-802
Keyword(s):  
Energy Harvesting ◽  
Power Consumption ◽  
Sensor Node ◽  
Dual Energy ◽  
Wireless Sensor ◽  
Wireless Sensor Node ◽  
Energy Aware ◽  
Management Algorithm ◽  
Event Trigger ◽  
Self Powered

A novel self-powered wireless sensor node is proposed and prototyped to overcome the ambient energy lacking in the dual energy harvesting sources by including a secondary energy storage. Moreover, an energy-aware Event-Priority-Driven Dissemination (EPDD) management algorithm has been developed and implemented to control the WSN integrity and reducing the sensor node power consumption as well. EPDD was developed to manage the sensor node operation and to make the sink station able to detect a missing wireless node within the network, which will guarantee the nodes integrity detection. The evaluations revealed that the EPDD shows a good performance in reducing the node power consumption compared to the data push algorithm, whereby, EPDD node was operating 4 hours more than the data push node on the same power source. Regarding the WSN integrity, the EPDD algorithm outpaced the event trigger algorithm, whereby, the EPDD was easily able to detect a node down within the WSN at the contrary of the event trigger.

scholarly journals A Review of Energy Harvesting Methods for Power Transmission Line Monitoring Sensors

2018 ◽  
Vol 7 (4.35) ◽  
pp. 153 ◽  
Author(s):  
Suganthi Yeesparan ◽  
Mohd Zafri Bin Baharuddin ◽  
Norashidah Bt Md Din ◽  
Mohamad Halil Haron
Keyword(s):  
Energy Harvesting ◽  
Electric Field ◽  
Transmission Line ◽  
Condition Monitoring ◽  
Power Transmission ◽  
Field Energy ◽  
Power Transmission Line ◽  
Radio Frequency Energy ◽  
Continuous Power ◽  
Transmission Line Monitoring

Condition monitoring sensors have the responsibility of reducing occupational failures or unscheduled shutdowns especially in power transmission line systems. Existing sensors that are used for condition monitoring are mostly battery-dependent. Powering up these sensors in difficult to access areas where high voltage transmission line usually runs is a challenge because batteries usually have a limited life cycle. Power sources other than batteries such as harvesting from solar energy, magnetic energy, radio frequency energy either produces insufficient energy or not entirely available all the time. Electric Field Energy Harvesting (EFEH) overcomes many of these disadvantages and provides a quality and continuous power source to be used to power up devices especially the monitoring sensors that are used in transmission line monitoring. This paper presents key aspects and drawbacks of six types of energy harvesting methods and a review of existing energy harvesters. The concept of electric field and the usage of EFEH in power transmission line system are explained and a comparison between EFEH with typical energy harvesting methods is discussed. This paper finds that EFEH devices have potential to provide sufficient energy for low powered condition monitoring sensors. Moreover, several improved EFEH approaches are proposed, and future trends are discussed.

Composite right/left-handed transmission line with array of thermocouples for generating terahertz radiation

2020 ◽  
Vol 92 (2) ◽  
pp. 20502
Author(s):  
Behrokh Beiranvand ◽  
Alexander S. Sobolev ◽  
Anton V. Kudryashov
Keyword(s):  
Transmission Line ◽  
Terahertz Radiation ◽  
Transmission Lines ◽  
Software Package ◽  
Optical Pulses ◽  
Capacitively Coupled ◽  
Voltage Difference ◽  
Left Handed ◽  
Microwave Transmission ◽  
Commercial Software Package

We present a new concept of the thermoelectric structure that generates microwave and terahertz signals when illuminated by femtosecond optical pulses. The structure consists of a series array of capacitively coupled thermocouples. The array acts as a hybrid type microwave transmission line with anomalous dispersion and phase velocity higher than the velocity of light. This allows for adding up the responces from all the thermocouples in phase. The array is easily integrable with microstrip transmission lines. Dispersion curves obtained from both the lumped network scheme and numerical simulations are presented. The connection of the thermocouples is a composite right/left-handed transmission line, which can receive terahertz radiation from the transmission line ports. The radiation of the photon to the surface of the thermocouple structure causes a voltage difference with the bandwidth of terahertz. We examined a lossy composite right/left-handed transmission line to extract the circuit elements. The calculated properties of the design are extracted by employing commercial software package CST STUDIO SUITE.

Sign in / Sign up

Export Citation Format

Share Document