scholarly journals Enhanced Thermal Insulation and Flame-Retardant Properties of Polyvinyl Alcohol-Based Aerogels Composited with Ammonium Polyphosphate and Chitosan

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
MinYi Luo ◽  
Jiayou Xu ◽  
Shu Lv ◽  
XueFeng Yuan ◽  
Xiaolan Liang
Keyword(s):  
Polyvinyl Alcohol ◽  
Heat Release ◽  
Flame Retardant ◽  
Thermal Insulation ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Ammonium Polyphosphate ◽  
Composite Aerogel ◽  
Composite Aerogels

Polyvinyl alcohol- (PVA-) based aerogels have attracted widespread attention owing to their low cost, eco-friendliness, and low density. However, the applications of PVA-based aerogels are limited by their flammability. In this study, a flame retardant, ammonium polyphosphate (APP), and a biopolymer, chitosan (CS), were added to polyvinyl alcohol (PVA), and the polymer was further crosslinked using boric acid (H3BO3). In the PVA aerogels, the negatively charged APP and positively charged CS formed a polyelectrolyte complex (PEC) through ionic interaction. Cone calorimetry and vertical burning tests (UL-94) indicated that the PVA composite aerogels have excellent flame retardancy; they could decrease the heat release rate, total heat release rate, and carbon dioxide (CO2) generation. Both PVA/H3BO3 and APP-CS in the composite aerogel could be burned to carbon, and the foamed char layer could act together to impart the PVA composite aerogels with good flame retardancy. Further, the decrease in the temperature at the backside of the aerogels with increasing APP-CS content, as determined by the flame-spraying experiment, indicated that the PVA-based aerogels with APP-CS can also serve as thermal insulation materials. This work provides an effective and promising method for the preparation of PVA-based aerogels with good flame retardancy and thermal insulation property for construction materials.

Synthesis of a phosphorus–nitrogen-containing flame retardant and its application in epoxy resin

2018 ◽  
Vol 31 (2) ◽  
pp. 186-196 ◽  
Author(s):  
Shuang Yang ◽  
Yefa Hu ◽  
Qiaoxin Zhang
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Epoxy Resins ◽  
Proton Nuclear Magnetic Resonance ◽  
Scanning Calorimetry ◽  
Cone Calorimeter Test

In this article, a phosphorus–nitrogen-containing flame retardant (DOPO-T) was successfully synthesized by nucleophilic substitution reaction between 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and cyanuric chloride. The chemical structure of DOPO-T was characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (NMR) and phosphorous-31 NMR, and elemental analysis. DOPO-T was then blended with diglycidyl ether of bisphenol-A to prepare flame-retardant epoxy resins. Thermal properties, flame retardancy, and combustion behavior of the cured epoxy resins were evaluated by differential scanning calorimetry, thermogravimetric analysis, limited oxygen index (LOI) measurement, UL94 vertical burning test, and cone calorimeter test. The results indicated that the glass transition temperature ( Tg) and temperature at 5% weight loss of epoxy resin (EP)/DOPO-T thermosets were gradually decreased with the increasing content of DOPO-T. DOPO-T catalyzed the decomposition of EP matrix in advance. The flame-retardant performance of EP thermosets was significantly enhanced with the addition of DOPO-T. EP/DOPO-T-0.9 sample had an LOI value of 36.2% and achieved UL94 V-1 rating. In addition, the average of heat release rate, peak of heat release rate, average of effective heat of combustion, and total heat release (THR) of EP/DOPO-T-0.9 sample were decreased by 32%, 48%, 23%, and 31%, respectively, compared with the neat EP sample. Impressively, EP/DOPO-T thermosets acquired excellent flame retardancy under low loading of flame retardant.

scholarly journals Synergistic Effects of Two-Dimensional MXene and Ammonium Polyphosphate on Enhancing the Fire Safety of Polyvinyl Alcohol Composite Aerogels

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1964 ◽  
Author(s):  
Xinxin Sheng ◽  
Sihao Li ◽  
Yanfeng Zhao ◽  
Dongsheng Zhai ◽  
Li Zhang ◽  
...  
Keyword(s):  
Transition Metal ◽  
Polyvinyl Alcohol ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Fire Hazard ◽  
Ammonium Polyphosphate ◽  
Transition Metal Carbide ◽  
Metal Carbide ◽  
Limiting Oxygen Index ◽  
Composite Aerogels

Fire and smoke suppressions of polyvinyl alcohol (PVA) aerogels are urgently required due to the serious fire hazard they present. MXene, a 2D transition-metal carbide with many excellent properties, is considered a promising synergist for providing excellent flame retardant performance. PVA/ammonium polyphosphate (APP)/transition metal carbide (MXene) composite aerogels were prepared via the freeze-drying method to enhance the flame retardancy. Thermogravimetric analysis, limiting oxygen index, vertical burning, and cone calorimeter tests were executed to investigate the thermal stability and flame retardancy of PVA/APP/MXene (PAM) composite aerogels. The results demonstrated that MXene boosted the flame retardancy of PVA-APP, and that PAM-2 (with 2.0 wt% MXene loading) passed the V-0 rating, and reached a maximum LOI value of 42%; Moreover, MXene endowed the PVA-APP system with excellent fire and smoke suppression performance, as the the peak heat release rate and peak smoke production rate were significantly reduced by 55% and 74% at 1.0 wt% MXene loading. The flame retardant mechanism was systematically studied, MXene facilitated the generation of compact intumescent residues via ita catalyst effects, thus further restraining the release of heat and smoke. This work provides a simple route to improve the flame retardancy of PVA aerogels via the synergistic effect of MXene and APP.

scholarly journals Effects of an Organic-Inorganic Hybrid Containing Allyl Benzoxazine and POSS on Thermal Properties and Flame Retardancy of Epoxy Resin

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 770 ◽  
Author(s):  
Benben Liu ◽  
Huiling Wang ◽  
Xiaoyan Guo ◽  
Rongjie Yang ◽  
Xiangmei Li
Keyword(s):  
Thermal Properties ◽  
Heat Release ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Cone Calorimeter ◽  
Inorganic Hybrid ◽  
X Ray

A novel organic-inorganic hybrid containing allyl benzoxazine and polyhedral oligomeric silsesquioxane (POSS) was synthesized by the thiol-ene (click) reaction. The benzoxazine (BOZ)-containing POSS (SPOSS-BOZ) copolymerized with benzoxazine/epoxy resin was used to prepare composites of SPOSS-PBZ-E nanocomposites(NPs). The polymerization behavior was monitored by FTIR and non-isothermal differential scanning calorimetry (DSC), which showed that the composites had completely cured with multiple polymerization mechanisms according to the oxazine ring-opening and epoxy resin (EP) polymerization. The thermal properties of the organic–inorganic polybenzoxazine (PBZ) nanocomposites were analyzed by DSC and thermogravimetric analysis (TGA). Furthermore, the X-ray diffraction analysis and the scanning electron microscopy (SEM) micrographs of the SPOSS-PBZ-E nanocomposites indicated that SPOSS was chemically incorporated into the hybrid nanocomposites in the size range of 80–200 nm. The flame retardancy of the benzoxazine epoxy resin composites was investigated by limiting oxygen index (LOI), UL 94 vertical burn test, and cone calorimeter tests. When the amount of SPOSS reached 10% or more, the vertical burning rating of the curing system arrived at V-1, and when the SPOSS-BOZ content reached 20 wt %, the thermal stability and flame retardancy of the material were both improved. Moreover, in the cone calorimeter testing, the addition of SPOSS-BOZ hindered the decomposition of the composites and led to a reduction in the peak heat release rate (pHRR), the average heat release rate (aHRR), and the total heat release (THR) values by about 20%, 25%, and 25%, respectively. The morphologies of the chars were also studied by SEM and energy dispersive X-ray spectroscopy (EDX), and the flame-retardant mechanism of POSS was mainly a condensed-phase flame retardant. The ceramic layer was formed by the enrichment of silicon on the char surface. When there are enough POSS nanoparticles, it can effectively protect the combustion of internal polymers.

scholarly journals Preparation of γ-Divinyl-3-Aminopropyltriethoxysilane Modified Lignin and Its Application in Flame Retardant Poly(lactic acid)

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1505 ◽  
Author(s):  
Yan Song ◽  
Xu Zong ◽  
Nan Wang ◽  
Ning Yan ◽  
Xueying Shan ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Poly Lactic Acid ◽  
Modified Lignin ◽  
Thermal Stability Of

Lignin can be a candidate as a charring agent applied in halogen-free flame retardant polymers, and incorporation of silicon and nitrogen elements in lignin can benefit to enhancing its thermal stability and charring ability. In the present work, wheat straw alkali lignin (Lig) was modified to incorporate silicon and nitrogen elements by γ-divinyl-3-aminopropyltriethoxysilane, and the modified lignin (CLig) was combined with ammonium polyphosphate (APP) as intumescent flame retardant to be applied in poly(Lactic acid) (PLA). The flame retardancy, combustion behavior and thermal stability of PLA composites were studied by the limited oxygen index (LOI), vertical burning testing (UL-94), cone calorimetry testing (CCT) and thermogravimetric analysis (TGA), respectively. The results showed a significant synergistic effect between CLig and APP in flame retarded PLA (PLA/APP/CLig) occured, and the PLA/APP/CLig had better flame retardancy. CCT data analysis revealed that CLig and APP largely reduced the peak heat release rate (PHRR) and total heat release rate (THR) of PLA, indicating their effectiveness in decreasing the combustion of PLA. TGA results exhibited that APP and CLig improved the thermal stability of PLA at high temperature. The analysis of morphology and structure of residual char indicated that a continuous, compact and intumescent char layer on the material surface formed during firing, and had higher graphitization degree. Mechanical properties data showed that PLA/APP/CLig had higher tensile strength as well as elongation at break.

Intumescent flame retardant coating for polyamide 6,6 (PA 6,6) fabrics containing carbon nanotubes: Synergistic effect of filler on thermal stability and flame retardancy

2018 ◽  
Vol 89 (10) ◽  
pp. 2031-2040 ◽  
Author(s):  
Fanglong Zhu ◽  
QQ Feng ◽  
YF Xu ◽  
JF Hu
Keyword(s):  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Intumescent Flame Retardant ◽  
Flame Resistance ◽  
Limiting Oxygen Index

Flame retardant mixtures of multi-walled carbon nanotubes (MWCNTs) and intumescent flame retardant (IFR) coatings were applied to polyamide 6,6 (PA 6,6) fabrics to explore whether MWCNTs acted as a good synergist on the thermal stability and flame resistance of the IFR system. The influence of MWCNTs on the flame retardant properties and thermal degradation of the PA 6,6 fabrics were investigated by limiting oxygen index (LOI), vertical burning test (VBT), thermogravimetric analyzer (TGA), scanning electron microscopy (SEM) and cone calorimeter test (CCT). The peak heat release rate and total heat release of the IFR-PA 6,6 fabric with three kinds of wt% MWCNTs were lower than those of the only traditional IFR-PA 6,6 fabric (reduced by 74.2–76.4% and 74.3–76.5%, respectively). As compared to the traditional IFR coating, it was found that no enhancements for thermal stability and flame retardancy in terms of the ability to retard ignition were achieved for the MWCNT/IFR coating. These results demonstrated that the introduction of MWCNTs into an IFR coating can improve the flame retardancy of PA 6,6 fabric in terms of the heat release rate from CCT analysis, but it failed other burning measurements, such as LOI and VBT.

scholarly journals Flame-Retardant and Thermal Degradation Mechanism of Caged Phosphate Charring Agent with Melamine Pyrophosphate for Polypropylene

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Xuejun Lai ◽  
Jiedong Qiu ◽  
Hongqiang Li ◽  
Xingrong Zeng ◽  
Shuang Tang ◽  
...  
Keyword(s):  
Thermal Degradation ◽  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Release Rate ◽  
Degradation Mechanism ◽  
Limiting Oxygen Index ◽  
Thermal Degradation Mechanism ◽  
Charring Agent ◽  
Ul 94

An efficient caged phosphate charring agent named PEPA was synthesized and combined with melamine pyrophosphate (MPP) to flame-retard polypropylene (PP). The effects of MPP/PEPA on the flame retardancy and thermal degradation of PP were investigated by limiting oxygen index (LOI), vertical burning test (UL-94), cone calorimetric test (CCT), and thermogravimetric analysis (TGA). It was found that PEPA showed an outstanding synergistic effect with MPP in flame retardant PP. When the content of PEPA was 13.3 wt% and MPP was 6.7 wt%, the LOI value of the flame retardant PP was 33.0% and the UL-94 test was classed as a V-0 rating. Meanwhile, the peak heat release rate (PHRR), average heat release rate (AV-HRR), and average mass loss rate (AV-MLR) of the mixture were significantly reduced. The flame-retardant and thermal degradation mechanism of MPP/PEPA was investigated by TGA, Fourier transform infrared spectroscopy (FTIR), TG-FTIR, and scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDXS). It revealed that MPP/PEPA could generate the triazine oligomer and phosphorus-containing compound radicals which changed the thermal degradation behavior of PP. Meanwhile, a compact and thermostable intumescent char was formed and covered on the matrix surface to prevent PP from degrading and burning.

scholarly journals The Fabrication and Properties Characterization of Wood-Based Flame Retardant Composites

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Xia He ◽  
Xianjun Li ◽  
Zhu Zhong ◽  
Yongli Yan ◽  
Qunying Mou ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Release Rate ◽  
Untreated Wood ◽  
Smoke Suppression ◽  
Zinc Borate ◽  
Fire Intensity ◽  
Flame Retardation ◽  
Nano Zinc

Wood-based flame retardant composites were fabricated based on vacuum-pressure impregnating method after high intensive microwave pretreatment. The effects of ammonium polyphosphate (APP) and modified nano-zinc borate (nZB) addition on flame-retardation and smoke-suppression properties of wood were investigated by cone calorimeter method (CONE) and thermogravimetric analysis (TGA). The results show that the heat release rate (HRR), peak heat release rate (pk-HRR), and total heat release (THR) of APP-treated woods decreased greatly with increasing concentration of APP. However, mean yield of CO (Mean COY) of APP-treated wood was much higher (3.5 times) than that of untreated wood. Compared with wood treated with APP at a concentration of 15%, the total smoke product (TSP), Mean COY, and pk-HRR decreased by 78.4%, 71.43%, and 31.23%, when wood was treated with APP and nZB (both concentrations were at 15%). APP and nZB have synergistic effects of flame-retardation and smoke-suppression. Nano-zinc borate combined with APP would be used in wood-based composites to efficiently retard flame, reduce fire intensity, and decrease noxious (CO)/smoke release.

Study on Flame-Retardant Properties of Flame Retardant Asphalt Mixture

2013 ◽  
Vol 438-439 ◽  
pp. 387-390 ◽  
Author(s):  
Da Liang Liu ◽  
Yi Zhong Yan ◽  
Yun Yong Huang ◽  
Jia Liang Yao ◽  
Jian Bo Yuan
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Release Rate ◽  
Flame Retardants ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Peak Heat Release Rate ◽  
Flame Retardant Properties ◽  
Sbs Modified Asphalt

Flame retardants modified asphalt with SBS flame retardant SMA hybrid material was prepared, flame retardant performances of SMA mixture was studied by the cone calorimeter. The results show that adding 12% flame retardant with SBS modified asphalt in preparation of flame retardant SMA mixture, the peak heat release rate values than the non-flame retardant asphalt mixture decreased by 4.02 kW/m2, and the heat release rate values were significantly reduced, the total heat and the amount of smoke of flame retardant asphalt mixture released less than the non-flame retardant asphalt mixture.

Flame Retardation of Natural Bamboo Fiber/ Polypropylene Fiber Non-Woven Materials

2011 ◽  
Vol 105-107 ◽  
pp. 1723-1726
Author(s):  
Wei Ma ◽  
Wen Bin Yao
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Heat Release Rate ◽  
Release Rate ◽  
Cone Calorimeter ◽  
Polypropylene Fiber ◽  
Bamboo Fiber ◽  
Peak Heat Release Rate ◽  
Natural Bamboo Fiber ◽  
Flame Retardation

According to Natural Bamboo Fiber/ Polypropylene fiber(PP) non-woven materials encountered the problem that its flame retardation is insufficient, this paper tried to add flame retardant to improve its performance, then the cone calorimeter was used to evaluate its flammability. The results show that Peak-Heat Release Rate and Smoke Release Rate etc significantly improved. In accordance with the UL94 ,the flame retardation meet the level V-0 , consistent with the requirements of enterprise.

Flame Retardancy of Laponite- and Montmorillonite-Based Nylon 6 Nanocomposites

2003 ◽  
Vol 788 ◽  
Author(s):  
Gunes Inan ◽  
Prabir K. Patra ◽  
Yong K. Kim ◽  
Steven B. Warner
Keyword(s):  
Mass Loss ◽  
Heat Release ◽  
Heating Rate ◽  
Heat Release Rate ◽  
Flame Retardancy ◽  
Release Rate ◽  
Barrier Properties ◽  
Nylon 6 ◽  
Release Rates ◽  
Peak Heat Release Rate

ABSTRACTThe flame retardancy of nylon 6/laponite and nylon 6/montmorillonite nanocomposites was investigated. The pronounced effect of layered silicates on heat release and mass loss rates of nylon 6 was examined. We found that nylon 6/laponite has 46 % and nylon 6/montmorillonite has 52.5 % lower peak heat release rates than that of neat nylon 6. The 6.5 % difference between the peak heat release rates of laponite- and montmorillonite-based nanocomposites was attributed to differences in aspect ratio and surface charge density of the nanoparticles.The barrier properties of nanocomposite chars was evaluated by examining the peak heat release and mass loss rate reductions of stacks of layers, with the bottom layer being neat nylon 6 polymer and the top layers being nanocomposites that formed chars during the experiments. We observed that the peak heat release rate of a 10×10×0.3 cm neat nylon 6 slab was reduced by about 45 % when protected with a char-forming nylon 6/montmorillonite slab of same dimensions. The dramatic reduction of the peak heat release rate of neat nylon 6 when covered with a nanocomposite char was consistent with the notion that the flame retardancy of polymer/clay nanocomposites is affected by the (thermal and/or mass) barrier properties of the char. In order to test the thermal insulation of the char, temperature profiles of the layered samples were measured during cone calorimeter experiments. We observed that the nanocomposite char that brought about a 44.5 % reduction in peak heat release and mass loss rates reduced the heating rate of the same neat nylon 6 by about 31.2 %. The reduction in the heating rate increased with the amount of nanocomposite char formed.

Sign in / Sign up

Export Citation Format

Share Document