scholarly journals Numerical Simulation of Mining-Induced Stress Evolution and Fault Slip Behavior in Deep Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Zhenhua Jiao ◽  
Lei Wang ◽  
Ming Zhang ◽  
Jiong Wang

The ground pressure distributes significant variation in underground mining near fault. Fault reactivation is an important factor to induce the rock burst. Therefore, characterizing geological settings in mining areas by the geological information can improve the accuracy of simulation. To investigate the characteristic of mining stress evolution and reactivation of the F16 reverse fault during the retreat Mining-Induced s in Yima coalfield, a three-dimensional digital elevation model based on GIS platform was applied. The 3D geological model includes three working faces, and F16 fault was constructed by AutoCAD software. Then, the 3D geological model was imported into the FLAC3D code to simulate the potential of mining-induced fault reactivation. The simulation results illustrate that the footwall of F16 fault is a high stress concentration area. Affected by F16 fault and the huge thick gravel rock in the roof, the coal seam near the fault accumulates a large amount of elastic strain energy, which increases the potential of rock burst hazards in the process of mining.

2021 ◽  
Author(s):  
Léo Marconato ◽  
Philippe-Hervé Leloup ◽  
Cécile Lasserre ◽  
Séverine Caritg ◽  
Romain Jolivet ◽  
...  

<div> <div> <div> <p>The 2019, M<sub>w</sub>4.9 Le Teil earthquake occurred in southeastern France, causing important damage in a slow deforming region. Field based, remote sensing and seismological studies following the event revealed its very shallow depth, a rupture length of ~5 km with surface rupture evidences and a thrusting mechanism. We further investigate this earthquake by combining geological field mapping and 3D geology, InSAR time series analysis and coseismic slip inversion.</p> <p>From structural, stratigraphic and geological data collected around the epicenter, we first produce a 3D geological model over a 70 km<sup>2</sup> and 3 km deep zone surrounding the 2019 rupture, using the GeoModeller software. This model includes the geometry of the main faults and geological layers, and especially a geometry for La Rouvière Fault, an Oligocene normal fault likely reactivated during the earthquake.</p> <p>We also generate a time series of the surface displacement by InSAR, based on Sentinel-1 data ranging from early January 2019 to late January 2020, using the NSBAS processing chain. The spatio-temporal patterns of the surface displacement for this limited time span show neither clear pre-seismic signal nor significant postseismic slip. We extract from the InSAR time series the coseismic displacement pattern, and in particular the along-strike slip distribution that shows spatial variations. The maximum relative displacement along the Line-Of-Sight is up to ~16 cm and is located in the southwestern part of the rupture.</p> <p>We then invert for the slip distribution on the fault from the InSAR coseismic surface displacement field. We use a non-negative least square approach based on the CSI software and the fault surface trace defined in the 3D geological model, exploring the range of plausible fault dip values. Best-fitting dips range between 55° and 60°. Such values are slightly lower than those measured on La Rouvière Fault planes in the field. Our model confirms the reactivation of La Rouvière fault, with reverse slip at very shallow depth and two main slip patches reaching 30 cm and 24 cm of slip at 400-500m depth. We finally discuss how the 3D fault geometry and geological configuration could have impacted the slip distribution and propagation during the earthquake.</p> <p>This study is a step to better quantify strain accumulation and assess the seismic hazard associated with other similar faults along the Cévennes fault system, in a densely populated area hosting several nuclear plants.</p> </div> </div> </div>


Water ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 75
Author(s):  
Jixiang Zhu ◽  
Yan Lu ◽  
Guanghui Zhang ◽  
Xiaoyuan Zhou ◽  
Guangjun Ji

Accurately depicting the spatial structure characteristics of Quaternary loose sedimentary strata is not only of great significance for the research of Quaternary geological evolution, but also for the analysis of spatial variation characteristics of the inner hydrogeological and engineering geological attributes of the strata. In this study, an approach for constructing a 3D geological model of Quaternary loose sedimentary strata is proposed based on global stratigraphical discrete points. The approach obtains the discrete control point set of each stratum by using limited borehole data for interpolation and encryption, and the contact relationships and intersection modes of adjacent strata can be determined via the analysis of stratigraphic sequence; finally, taking these as the professional basis, the construction of the 3D geological model of Quaternary loose sedimentary strata can be carried out. This application can not only accurately describe the three-dimensional spatial distribution characteristics of the Quaternary loose sedimentary strata, it can also be used to perform a layered simulation of the spatial variation characteristics of the inner geological properties of the Quaternary loose sedimentary strata, such as lithology, porosity, and water content, by taking the three-dimensional spatial framework of each stratum as the simulation boundary. Finally, this study takes the citizen center of Xiong’an new area as an example in order to verify the reliability and advancement of the 3D geological modeling scheme.


2021 ◽  
Author(s):  
Aurio Erdi ◽  
Christopher Jackson

<p>Strike slip faults are a prominent tectonic feature in Earth to accommodate horizontal and/or oblique slip that trend parallel to fault strike. These faults are commonly formed on plate boundaries setting, where they are basement-involved and driven by elastic crustal loading at seismogenic depths. Still, we also observe the strike slip faults on salt-bearing slopes, where the faults are typically thin-skinned and accommodate spatial variability in the rate of seaward flow of salt and its overburden. In both cases, relatively little is still known of their three-dimensional geometry and growth in comparison to both normal and reverse fault, that have been extensively studied.</p><p>We use a high-quality, depth-migrated 3D seismic dataset to investigate salt-detached strike-slip faults in the mid-slope translational domain of the Outer Kwanza Basin, offshore Angola. We show that NE-SW-striking faults are presently located above elongate, margin-parallel, NE-trending ramps, more amorphous, dome-like structural highs, and areas of relatively subdued relief. The faults are broadly planar, display normal and/or reverse offsets, and may locally bound negative flower structures. These faults offset a range of salt and overburden structures, including salt walls and anticlines, and salt -detached thrusts and normal faults, defining six major structural compartments. Our displacement-distance (Tx) analysis of several faults reveal they are characterized by complex throw distributions that define 3-to-10, now hard-linked segments. In vertical profiles, these segments are characterized by symmetric-to-asymmetric throw distributions (Tz) that record throw maxima at the top of the Albian, Eocene and/or Early Miocene. Expansion indices (EI) and isopach maps demonstrate the presence of fault-related growth strata, with complex thickness patterns also reflecting the combined effect of vertical (i.e. diapirism) and horizontal (i.e. translation) salt tectonics.  Taken together, our observations suggest the salt detached strike-slip faults evolved during three key phases: (i) Albian – nucleation and local linkage of individual segments; (ii) Eocene-to-Oligocene – reactivation, propagation, and death of many now-linked segments; and (iii) Miocene – local fault reactivation due to salt diapirism.  </p><p>We show that salt detached strike-slip faults in the translational domain of the Outer Kwanza Basin grew above either rugose or relatively flat base-salt surface. More specifically, salt detached strike-slip faults, like normal and reverse faults documented elsewhere, grew in response to the propagation and eventual linkage of initially isolated segments. We also highlight that the coeval growth of salt walls can play a role in controlling the three-dimensional geometry and kinematics of salt detached strike-slip faults.</p>


2013 ◽  
Vol 50 (5) ◽  
pp. 519-534 ◽  
Author(s):  
Simon Weides ◽  
Inga Moeck ◽  
Jacek Majorowicz ◽  
Dan Palombi ◽  
Matthias Grobe

This study explores the distribution of Paleozoic formations in the Central Alberta Basin and investigates rock properties with regard to their usability as geothermal reservoirs. The study area of this regional-scale investigation is about 160 km × 200 km in size and located around Edmonton where the basin depth ranges between 1.8 and 3.5 km. A three-dimensional (3D) geological model was developed based on stratigraphic tops from about 7000 wells from the database of the Alberta Geological Survey (AGS). Spatial distribution and thickness of deep formations were established in the 3D geological model. Porosity and permeability of four Devonian carbonate formations — Cooking Lake, Leduc, and Nisku formations, and Wabamun Group — were investigated using data from more than 50 000 core analyses. Average porosity of the Devonian strata in the study area ranges from 4.5% (Nisku) to 8.7% (Wabamun), average permeability is between 3.5 × 10−15 m2 (Wabamun) and 26 × 10−15 m2 (Leduc). The distribution of both parameters was analyzed using geostatistical methods. Based on an average geothermal gradient and the geometry of formations from the 3D modeling study, an estimation of formation temperatures for the Paleozoic formations is presented. Temperature in the Cambrian Basal Sandstone Unit ranges from 62 °C in the shallower northeast (1.8 km) to 122 °C in the deeper southwest (3.5 km); temperature in the Devonian strata ranges from 22 to 87 °C. With these new results, potential geothermal reservoirs can be delineated in the Alberta Basin around Edmonton, enabling future detailed exploration and field development.


2019 ◽  
pp. 45-51
Author(s):  
Uliana Yu. Solopakhina

In recent years, there has been a downward trend in easily recoverable hydrocarbon reserves in the Cretaceous sediments of Western Siberia. In this regard, interest in the horizon US2 has increased. Collectors of this horizon have a complex structure, which leads to the appearance of significant errors in geological models. The development of the methodological basis for the analysis of the accuracy of geological models, in particular three-dimensional, can solve this issue.The article gives a technique for analyzing the quality of a 3D geological model: a case study of horizon US2. As a result of the work, the following conclusions were drawn: firstly, there is the need to update geological models after drilling each well; secondly, the possible causes of the discrepancy between the actual and forecasted indices are revealed; thirdly, usage a map of the residuals of the absolute elevations of the horizon US2, as additional information, can minimize risks when drilling wells and increase the reliability of 3D geological model.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kui Gao ◽  
Ping Huang ◽  
Zegong Liu ◽  
Jian Liu ◽  
ChiMin Shu ◽  
...  

AbstractIn view of the coal and gas outburst accidents occur frequently caused by blasting in geological structural belt, in order to study the mechanical characteristics of coal rock in tectonic belt disturbance by blasting and blasting vibration effect influenced on the stability of surrounding rock, coal–rock damage and failure characteristics within a reverse fault caused by a blasting stress wave were investigated using numerical analyses and experiments. According to the experimental results, the causes of coal and gas outburst dynamic disasters within a reverse fault during blasting are analyzed. The outcomes indicated that the crushing circle created by the crack propagation near the blasting hole severely damaged the fault plane and floor rocks adjacent to the footwall of the reverse fault. Fractures also extended to the upper and lower coal seams of the reverse fault; this caused the surface of the coal seam to fall off and severe internal damage. According to theoretical analysis, the reflection of the blasting stress wave propagating to the reverse fault intensified the damage to coal and rock. Elastic strain energy accumulation within the reverse fault structural zone was accompanied by high-stress concentration. The reverse fault tectonic region was destroyed by blasting vibration. It increased gas pressure and caused a weak surface, which provided a channel for gas flow and a dynamic basis for the occurrence of coal and gas outburst. The research results have important theoretical value to reveal the mechanism of coal and gas outburst in tectonic belt induced by blasting.


2015 ◽  
Vol 52 (2) ◽  
pp. 96-111 ◽  
Author(s):  
Marie-Amélie Pétré ◽  
Alfonso Rivera ◽  
René Lefebvre

The Milk River Transboundary Aquifer (Canada–USA) has been so intensively used over the 20th century that concerns have risen about the durability of this resource since the mid-1950s. This aquifer actually corresponds to the middle Virgelle Member of the Upper Cretaceous Milk River Formation (called Eagle Formation in Montana). To assess the conditions needed for a sustainable use of the aquifer, a comprehensive and unified portrait of the aquifer is needed across its international boundary. The stratigraphic framework and geometry of geological units on both sides of the international border were thus unified in a 50 000 km2 three-dimensional (3D) geological model. The Virgelle Member is 0–60 m thick and it subcrops near the border and along both sides of the Sweetgrass Arch. It dips away from the subcrop areas in a semi-radial pattern. The Medicine Hat gas field hosted by the Alderson Member (Alberta), which is separated from the other members by a regional unconformity, and the Tiger Ridge gas field near the Bears Paw Mountains (Montana) limit the extent of the aquifer. The unified 3D geological model forms the necessary basis for conceptual and numerical hydrogeological models of the Milk River Aquifer.


2012 ◽  
Vol 220-223 ◽  
pp. 2866-2869
Author(s):  
Shao Hua Liu ◽  
Xin Hai Wang ◽  
Tang Jun

Visual technology and three-dimension modeling of Geologic bodies have important meaning in the fields of geological research and resource explore. Based on TIN surface, this paper realizes the model reconstructing of stratified geological entity three-dimension, with the aid of three-dimensional graphic library OpenGL, the visualization and any section view of geological three-dimension model can be achieved, which offers powerful support for excavating the information of 3D geological model


Sign in / Sign up

Export Citation Format

Share Document