scholarly journals 3-D Viscous Flow Analysis of an Axial Flow Pump Impeller

1997 ◽  
Vol 3 (3) ◽  
pp. 153-161 ◽  
Author(s):  
Steven M. Miner
Keyword(s):  
Stokes Equations ◽  
Flow Analysis ◽  
Axial Flow ◽  
Flow Coefficient ◽  
Navier Stokes ◽  
Design Parameters ◽  
Pump Impeller ◽  
Flow Angle ◽  
Axial Flow Pump ◽  
Flow Pump

A commercial CFD code is used to compute the flow field within the first stage impeller of a two stage axial flow pump. The code solves the 3-D Reynolds Averaged Navier Stokes equations in a rotating cylindrical coordinate system using a standardk−εturbulence model. Stage design parameters are, rotational speed 870 rpm, flow coefficientφ=0.12, head coefficientψ=0.06, and specific speed 2.86 (8070 US). Results from the study include relative and absolute velocities, flow angles, and static and total pressures. Comparison is made to measured data available for the same impeller at two planes, one upstream of the impeller and the other downstream. The comparisons are for circumferentially averaged results and include axial and tangential velocities, impeller exit flow angle, static pressure, and total pressure. Results of this study show that the computational results closely match the shapes and magnitudes of the measured profiles, indicating that CFD can be used to accurately predict performance.

scholarly journals 3-D Viscous Flow Analysis of a Mixed Flow Pump Impeller

2001 ◽  
Vol 7 (1) ◽  
pp. 53-63 ◽  
Author(s):  
Steven M. Miner
Keyword(s):  
Static Pressure ◽  
Stokes Equations ◽  
Leading Edge ◽  
Flow Coefficient ◽  
Design Parameters ◽  
Design Environment ◽  
Suction Surface ◽  
Mixed Flow ◽  
Pump Impeller ◽  
Flow Pump

This paper presents the results of a study using a coarse grid to analyze the flow in the impeller of a mixed flow pump. A commercial computational fluid dynamics code (FLOTRAN) is used to solve the 3-D Reynolds Averaged Navier Stokes equations in a rotating cylindrical coordinate system. The standardk-εturbulence model is used. The mesh for this study uses 26,000 nodes and the model is run on a SPARCstation 20. This is in contrast to typical analyses using in excess of 100,000 nodes that are run on a super computer platform. The smaller mesh size has advantages in the design environment. Stage design parameters are, rotational speed 1185 rpm, flow coefficientφ=0.116, head coefficientψ=0.094, and specific speed 2.01 (5475 US). Results for the model include circumferentially averaged results at the leading and trailing edges of the impeller, and analysis of the flow field within the impeller passage. Circumferentially averaged results include axial and tangential velocities, static pressure, and total pressure. Within the impeller passage the static pressure and velocity results are presented on surfaces from the leading edge to the trailing edge, the hub to the shroud, and the pressure surface to the suction surface. Results of this study are consistent with the expected flow characteristics of mixed flow impellers, indicating that small CFD models can be used to evaluate impeller performance in the design environment.

Evaluation of Blade Passage Analysis Using Coarse Grids

2000 ◽  
Vol 122 (2) ◽  
pp. 345-348 ◽  
Author(s):  
Steven M. Miner
Keyword(s):  
Rotational Speed ◽  
Stokes Equations ◽  
Axial Flow ◽  
Measured Data ◽  
Flow Coefficient ◽  
Design Parameters ◽  
Mixed Flow ◽  
Specific Speed ◽  
Coarse Grids ◽  
Flow Pump

This paper presents the results of a study using coarse grids to analyze the flow in the impellers of an axial flow pump and a mixed flow pump. A commercial CFD code (FLOTRAN) is used to solve the 3-D Reynolds Averaged Navier Stokes equations in a rotating cylindrical coordinate system. The standard k−ε turbulence model is used. The meshes for this study use 22,000 nodes and 40,000 nodes for the axial flow impeller, and 26,000 nodes for the mixed flow impeller. Both models are run on a SPARCstation 20. This is in contrast to typical analyses using in excess of 100,000 nodes. The smaller mesh size has advantages in the design environment. Stage design parameters for the axial flow impeller are, rotational speed 870 rpm, flow coefficient ϕ=0.13, head coefficient ψ=0.06, and specific speed 2.97 (8101 US). For the mixed flow impeller the parameters are, rotational speed 890 rpm, flow coefficient ϕ=0.116, head coefficient ψ=0.094, and specific speed 2.01 (5475 US). Evaluation of the models is based on a comparison of circumferentially averaged results to measured data for the same impeller. Comparisons to measured data include axial and tangential velocities, static pressure, and total pressure. A comparison between the coarse and fine meshes for the axial flow impeller is included. Results of this study show that the computational results closely match the shapes and magnitudes of the measured profiles, indicating that coarse CFD models can be used to accurately predict performance. [S0098-2202(00)02202-1]

scholarly journals CFD Analysis of the First-Stage Rotor and Stator in a Two-Stage Mixed Flow Pump

2005 ◽  
Vol 2005 (1) ◽  
pp. 23-29 ◽  
Author(s):  
Steven M. Miner
Keyword(s):  
Stokes Equations ◽  
Flow Coefficient ◽  
Navier Stokes ◽  
Design Parameters ◽  
Mixed Flow ◽  
Two Stage ◽  
Navier Stokes Equations ◽  
Pressure Profiles ◽  
Turbulence Effects ◽  
Flow Pump

A commercial computational fluid dynamics (CFD) code is used to compute the flow field within the first-stage rotor and stator of a two-stage mixed flow pump. The code solves the 3D Reynolds-averaged Navier-Stokes equations in rotating and stationary cylindrical coordinate systems for the rotor and stator, respectively. Turbulence effects are modeled using a standardk−εturbulence model. Stage design parameters are rotational speed890 rpm, flow coefficientφ=0.116, head coefficientψ=0.094, and specific speed2.01(5475 US). Results from the study include velocities, and static and total pressures for both the rotor and stator. Comparison is made to measured data for the rotor. The comparisons in the paper are for circumferentially averaged results and include axial and tangential velocities, static pressure, and total pressure profiles. Results of this study show that the computational results closely match the shapes and magnitudes of the measured profiles, indicating that CFD can be used to accurately predict performance.

The Development of an Aerodynamic Performance Prediction Tool for Modern Axial Flow Compressor Profiles

2006 ◽  
Author(s):  
Dario Bruna ◽  
Carlo Cravero ◽  
Mark G. Turner
Keyword(s):  
Performance Prediction ◽  
Parametric Design ◽  
Flow Analysis ◽  
Axial Flow ◽  
Navier Stokes ◽  
Flow Angle ◽  
Flow Solver ◽  
Aerodynamic Loss ◽  
Axial Flow Compressor ◽  
Flow Compressor

The development of a computational tool (MP-LOS) for the aerodynamic loss modeling and prediction for axial-flow compressor blade sections is presented in this paper. A state-of-the-art quasi 3-D flow solver, MISES, has been used for the flow analysis on existing airfoil geometries in many working conditions. Different values of inlet flow angle, inlet Mach number, AVDR, Reynolds number and solidity have been chosen to investigate a possible working range. The target is a loss prediction formulation that will be introduced into throughflow or axisymmetric Navier-Stokes codes for the performance prediction of multistage axial flow compressors. The loss coefficient has been correlated to the flow parameters that have shown an influence on the profile loss for the blades under study. The proposed correlation, using the described computational approach, can be extended to any profile family with the aid of any code for the parametric design of blade profiles.

Interactional Effects of Inlet Guide Vane and Blade Angle on Hydraulic Performance Characteristics of a Submersible Axial-Flow Pump

2018 ◽  
Author(s):  
Youn-Sung Kim ◽  
Hyeon-Seok Shim ◽  
Kwang-Yong Kim
Keyword(s):  
Stokes Equations ◽  
Guide Vane ◽  
Incidence Angle ◽  
Axial Flow ◽  
Performance Characteristics ◽  
Inlet Guide Vane ◽  
Computational Domain ◽  
Blade Angle ◽  
Axial Flow Pump ◽  
Flow Pump

This study aims to evaluate effects of blade pitch and inlet guide vane (IGV) angle on the performance characteristics of a submersible axial-flow pump. According to the results of the previous study, the efficiency at the design and over-load conditions were significantly affected by the angle of IGV due to change in the incidence angle. To investigate the interactional effects of IGV and blade angle are analyzed using three-dimensional Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model. The hexahedral grids are used in the computational domain and a grid-dependency test is performed to obtain an optimal number of the grids. In this study, combinations of three different blade angles and two different IGV angles are tested. Adjusting angle of IGV increases the total pressure of the pump with a blade pitch increase, which can increase the efficiency of the pump in operating range.

scholarly journals Study on the Performance Improvement of Axial Flow Pump’s Saddle Zone by Using a Double Inlet Nozzle

Water ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1493
Author(s):  
Weidong Cao ◽  
Wei Li
Keyword(s):  
Flow Rate ◽  
Three Dimensional ◽  
Axial Flow ◽  
Rotating Stall ◽  
Stable Operation ◽  
Inlet Section ◽  
Pump Impeller ◽  
Rate Condition ◽  
Axial Flow Pump ◽  
Flow Pump

The operating range of axial flow pumps is often constrained by the onset of rotating stall. An improved method using a double inlet nozzle to stabilize the performance curve is presented in the current study; a single inlet nozzle and three kinds of double inlet nozzle with different rib gap widths at the inlet of axial flow pump impeller were designed. Three dimensional (3D) incompressible flow fields were simulated, and the distributions of turbulence kinetic energy and velocity at different flow rates located at the inlet section, as well as the pressure and streamline in the impeller, were obtained at the same time. The single inlet nozzle scheme and a double inlet nozzle scheme were studied; the experimental and numerical performance results show that although the cross section is partly blocked in the double inlet nozzle, the head and efficiency do not decline at stable operation flow rate. On small flow rate condition, the double inlet nozzle scheme effectively stabilized the head-flow performance, whereby the block induced by the backflow before the impeller was markedly improved by using a double inlet nozzle. It has also been found that the rib gap width impacts the efficiency curve of the axial flow pump.

Behavior of Air Bubbles in an Axial-Flow Pump Impeller

1983 ◽  
Vol 105 (3) ◽  
pp. 277-283 ◽  
Author(s):  
M. Murakami ◽  
K. Minemura
Keyword(s):  
Bubble Diameter ◽  
Three Dimensional ◽  
Axial Flow ◽  
Air Bubbles ◽  
Bubble Motion ◽  
Three Dimensional Flow ◽  
Surrounding Water ◽  
Pump Impeller ◽  
Axial Flow Pump ◽  
Flow Pump

Motion of air bubbles in a high-specific-speed axial-flow pump impeller was analyzed on the basis of measured streak lines of air bubbles in the impeller. The results were compared with those obtained by a numerical solution of the bubble motion equations for three dimensional flow. Governing factors of the bubble motion are the drag force due to the surrounding water and the force due to the pressure gradient. Trajectories of the bubbles deviate somewhat from the streamlines of water, and the amount of the deviation is dependent on the bubble diameter and also on specific-speeds of the pumps and flow rate of water.

Sign in / Sign up

Export Citation Format

Share Document