Optimization of Fly-Ash Dosage for the Stabilization of Gravel Soil Using Cement for Use as Flexible Pavement Material

2018 ◽  
Vol 24 (6) ◽  
pp. 3914-3917
Author(s):  
Ashiru Sani ◽  
Nasiru Zakari Muhammad ◽  
Aras Mehan ◽  
Manasseh Joel
2012 ◽  
Vol 594-597 ◽  
pp. 1445-1448
Author(s):  
Tao Cheng ◽  
Ke Qin Yan

Mechanics properties of lime- fly ash stabilized soil are investigated. First, the chemical composition of fly ash are analyzed by spectral analysis test. Compaction experiments of all mix proportion projects are carried out in different water conditions to obtain the optimum water contents. Then the optimum mix proportion is obtained by the unconfined compressive strength and the compression rebound modulus test. Finally, the pavement structures design for a highway of lime- fly ash stabilized soil road sub-base is done. By the comparison, a conclusion can be drawn that lime-fly ash stabilized soil is suitable for flexible pavement or semi-rigid pavement because of its good strength and rigidity which can effectively reduce thickness of the lower pavement and basic deflection.


Author(s):  
Mohammed Dahim ◽  
Musab Abuaddous ◽  
Hashem Al-Mattarneh ◽  
Andan Rawashdeh ◽  
Rabah Ismail

2010 ◽  
Vol 168-170 ◽  
pp. 351-356 ◽  
Author(s):  
Qing Jun Ding ◽  
Zheng Sun ◽  
Fan Shen ◽  
Shao Long Huang

The volume parameter of matrix asphalt mixture is an important target in the design of the semi-flexible pavement. The research used volume-standar to design four kinds of matrix asphalt mixture, fulfilled mechanics performances and performances of semi-flexible pavement material with different aging, compared with common asphalt mixture and researched the effect by air void and pore structure. It proves that the compacted intensity, high-temperature stability and low temperature bend of the semi-flexible pavement material is better than common asphalt pavement material, the performances of matrix asphalt mixture with high air void is better. As for matrix asphalt mixture with same air void but different pore structure, the performances of homogenous grade design is prior to consecutive grade disign.


Reuse of existing deteriorated bituminous pavement material in construction and maintenance of flexible pavement is called recycling of bituminous pavement. Removed and reprocessed deteriorated pavement material which is recycled is termed as Reclaimed asphalt pavement (RAP). In India during construction of flexible pavement different types of bituminous layers are in practice depending upon CBR of sub-grade and traffic count i.e. CVPD of the road stretch. Depending upon types of bituminous layer i.e. PC Seal Coat, Bituminous Macadam(BM), Dense grade bituminous Macadam (DBM), Semi Dense Bituminous Concrete (SDBC) or Bituminous Concrete(BC) Reclaimed Asphalt Pavement can classified in different groups These classified RAP groups materials will have different characteristics i.e. Rap aggregates and Recovered bitumen of different group of RAP will have different characteristics. In this study characterization of RAP limited to Aggregate Impact Value (AIV) and Aggregate Abrasion Value (AAV)of RAP aggregates of RAP classified in different groups. Results of this study will be compared to standard value of AIV and AAV required for bituminous construction to predict that RAP aggregates are suitable or not for use in bituminous mixes.


Sign in / Sign up

Export Citation Format

Share Document