Double Diffusive Magnetohydrodynamic (MHD) Natural Convection and Entropy Generation in a Discretely Heated Inclined Dome-Shaped Enclosure Filled with Cu-Water Nanofluid

2021 ◽  
Vol 10 (4) ◽  
pp. 564-579
Author(s):  
Rujda Parveen ◽  
Priyajit Mondal ◽  
Tapas Ray Mahapatra
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Entropy Generation ◽  
Inclination Angle ◽  
Hartmann Number ◽  
Substantial Impact ◽  
Double Diffusive

This research presents an investigation of laminar two-dimensional double-diffusive free convection and entropy formation in an inclined enclosure under the influence of an inclined magnetic field. The performance of natural convective heat transfer can be improved by doing modifications in enclosure geometry that impact the flow structure. We have considered a dome-shaped enclosure to examine the heat and mass transfer performance. The enclosure is saturated with Cu-water nanofluid and the two sidewalls of the enclosure are maintained at constant temperature Tc(<Th) and concentration cc(<ch). The top-curved wall is adiabatic, and the lower wall is discretely heated and concentrated. The governing equations are first non-dimensionalized and then written in stream function-velocity formulation that is solved numerically using the Bi-CGStab method. A comparison with previously published work in literature is presented and found to be in excellent agreement. Numerical simulations are performed for various values of considered parameters such as Rayleigh number (Ra), Hartmann number (Ha), the orientation of magnetic field (γ), volume fraction of nanoparticles (Φ), and inclination angle of the enclosure (δ). The mentioned parameters have a substantial impact on the cavity flow characteristics. The obtained results demonstrate that the average Sherwood number and Nusselt number are decreasing functions of both the Hartmann number and inclination angle of the enclosure. The minimum heat and mass transfer took place at δ = 135° as the angle of inclination of the enclosure restrains the fluid velocity and reduces the heat transfer rate. Also, entropy generation analysis is conducted for all the considered parameters. The results show that the dome-shaped enclosure has a substantial impact on the fluid flow that enables a smoother and more effective flow inside the cavity, which improves the natural convective heat and mass transmission.

Entropy Generation in Convective Heat Transfer and Isothermal Convective Mass Transfer

1987 ◽  
Vol 109 (3) ◽  
pp. 647-652 ◽  
Author(s):  
J. Y. San ◽  
W. M. Worek ◽  
Z. Lavan
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Boundary Conditions ◽  
Convective Heat Transfer ◽  
Heat And Mass Transfer ◽  
Convective Heat ◽  
Entropy Generation ◽  
Ideal Gas ◽  
Convective Mass Transfer ◽  
Plate Spacing

The irreversible generation of entropy for two limiting cases of combined forced-convection heat and mass transfer in a two-dimensional channel are investigated. First, convective heat transfer in a channel with either constant heat flux or constant surface temperature boundary conditions are considered for laminar and turbulent flow. The entropy generation is minimized to yield expressions for optimum plate spacing and optimum Reynolds numbers for both boundary conditions and flow regimes. Second, isothermal convective mass transfer in a channel is considered, assuming the diffusing substance to be an ideal gas with Lewis number equal to unity. The flow is considered to be either laminar or turbulent with boundary conditions at the channel walls of either constant concentration or constant mass flux. The analogy between heat and mass transfer is used to determine the entropy generation and the relations for optimum plate spacing and Reynolds number. The applicable range of the results for both limiting cases are then investigated by non-dimensionalizing the entropy generation equation.

Forced convection heat and mass transfer of MHD nanofluid flow inside a porous microchannel with chemical reaction on the walls

2015 ◽  
Vol 32 (8) ◽  
pp. 2419-2442 ◽  
Author(s):  
S. A. Moshizi
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Transfer Rate ◽  
Uniform Magnetic Field ◽  
Hartmann Number ◽  
Total Heat ◽  
Slip Parameter ◽  
Total Heat Transfer ◽  
Content Type

Purpose – The purpose of this paper is to focus on convective heat and mass transfer characteristics of Cu-water nanofluid inside a porous microchannel in the presence of a uniform magnetic field. The walls of the microchannel are subjected to constant asymmetric heat fluxes and also the first order catalytic reaction. To represent the non-equilibrium region near the surfaces, the Navier’s slip condition is considered at the surfaces because of the non-adherence of the fluid-solid interface and the microscopic roughness in microchannels. Design/methodology/approach – Employing the Brinkman model for the flow in the porous medium and the “clear fluid compatible” model as a viscous dissipation model, the conservative partial differential equations have been transformed into a system of ordinary ones via the similarity variables. Closed form exact solutions are obtained analytically based on dimensionless parameters of velocity, temperature and species concentration. Findings – Results show that the addition of Cu-nanoparticles to the fluid has a significant influence on decreasing concentration, temperature distribution at the both walls and velocity profile along the microchannel. In addition, total heat transfer in microchannel increases as nanoparticles add to the fluid. Slip parameter and Hartmann number have the decreasing effects on concentration and temperature distributions. Slip parameter leads to increase velocity profiles, while Hartmann number has an opposite trend in velocity profiles. These two parameters increase the total heat transfer rate significantly. Originality/value – In the present study, a comprehensive analytical solution has been obtained for convective heat and mass transfer characteristics of Cu-water nanofluid inside a porous microchannel in the presence of a uniform magnetic field. Finally, the effects of several parameters such as Darcy number, nanoparticle volume fraction, slip parameter, Hartmann number, Brinkman number, asymmetric heat flux parameter, Soret and Damkohler numbers on total heat transfer rate and fluid flow profiles are studied in more detail. To the best of author’s knowledge, no study has been conducted to this subject and the results are original.

A Differential Quadrature Solution of MHD Natural Convection in an Inclined Enclosure With a Partition

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Kamil Kahveci ◽  
Semiha Öztuna
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Inclination Angle ◽  
Hartmann Number ◽  
Differential Quadrature ◽  
Flow And Heat Transfer ◽  
Inclined Enclosure ◽  
Vorticity Generation

Magnetohydrodynamics natural convection in an inclined enclosure with a partition is studied numerically using a differential quadrature method. Governing equations for the fluid flow and heat transfer are solved for the Rayleigh number varying from 104 to 106, the Prandtl numbers (0.1, 1, and 10), four different Hartmann numbers (0, 25, 50, and 100), the inclination angle ranging from 0degto90deg, and the magnetic field with the x and y directions. The results show that the convective flow weakens considerably with increasing magnetic field strength, and the x-directional magnetic field is more effective in reducing the convection intensity. As the inclination angle increases, multicellular flows begin to develop on both sides of the enclosure for higher values of the Hartmann number if the enclosure is under the x-directional magnetic field. The vorticity generation intensity increases with increase of Rayleigh number. On the other hand, increasing Hartmann number has a negative effect on vorticity generation. With an increase in the inclination angle, the intensity of vorticity generation is observed to shift to top left corners and bottom right corners. Vorticity generation loops in each region of enclosure form due to multicelluar flow for an x-directional magnetic field when the inclination angle is increased further. In addition, depending on the boundary layer developed, the vorticity value on the hot wall increases first sharply with increasing y and then begins to decrease gradually. For the high Rayleigh numbers, the average Nusselt number shows an increasing trend as the inclination angle increases and a peak value is detected. Beyond the peak point, the foregoing trend reverses to decrease with the further increase of the inclination angle. The results also show that the Prandtl number has only a marginal effect on the flow and heat transfer.

Magnetic field effects on natural convection and entropy generation of non-Newtonian fluids using multiple-relaxation-time lattice Boltzmann method

2020 ◽  
pp. 2150015
Author(s):  
Aimon Rahman ◽  
Preetom Nag ◽  
Md. Mamun Molla ◽  
Sheikh Hassan
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Hartmann Number ◽  
Magnetic Field Effect ◽  
Multiple Relaxation Time ◽  
Number Formula ◽  
Boltzmann Method ◽  
The Magnetic Field

The magnetic field effect on natural convection flow of power-law (PL) non-Newtonian fluid has been studied numerically using the multiple-relaxation-time (MRT) lattice Boltzmann method (LBM). A two-dimensional rectangular enclosure with differentially heated at two vertical sides has been considered for the computational domain. Numerical simulations have been conducted for different pertinent parameters such as Hartmann number, [Formula: see text], Rayleigh number, [Formula: see text], PL indices, [Formula: see text]–1.4, Prandtl number, [Formula: see text], to study the flow physics and heat transfer phenomena inside the rectangular enclosure of aspect-ratio [Formula: see text]. Numerical results show that the heat transfer rate, quantified by the average Nusselt number, is attenuated with increasing the magnetic field, i.e. the Hartmann number (Ha). However, the average Nusselt number is increased by increasing the Rayleigh number, [Formula: see text] and decreasing the PL index, [Formula: see text]. Besides, the generation of entropy for non-Newtonian fluid flow under the magnetic field effect has been investigated in this study. Results show that in the absence of a magnetic field, [Formula: see text], fluid friction and heat transfer irreversibilities, the total entropy generation decreases and increases with increasing [Formula: see text] and [Formula: see text], respectively. In the presence of the magnetic field, [Formula: see text], the fluid friction irreversibility tends to decrease with increasing both the shear-thinning and shear thickening effect. It is noteworthy that strengthening the magnetic field leads to pulling down the total entropy generation and its corresponding components. All simulations have been performed on the Graphical Processing Unit (GPU) using NVIDIA CUDA and employing the High-Performance Computing (HPC) facility.

Sign in / Sign up

Export Citation Format

Share Document