Nanostructured Composite Catalyst for Electrochemical Water Splitting: Significantly Improved for Hydrogen Evolution Reaction

2020 ◽  
Vol 18 (11) ◽  
pp. 842-852
Author(s):  
Abdul Qayoom Mugheri ◽  
Muhammad Soomar Samtio ◽  
Shahzad Ahmed Memon

The evolutionary and rational design we incorporated for an efficient nonprecious metal nanocom-posite electrocatalysts for the hydrogen production which is a scientific challenge in the field of renewable energy. Herein, we report a simple and very active, the functional electrocatalyst for water oxidation which is highly demanded. It is of great prime importance for hydrogen evolution reaction (HER) which significantly contributes to renewable technologies. The values for electrocatalysts are NiCo2O4 and NiCo2O3/P Tafel slope 66 and 42 mV/decade and overpotential of 382 and 320 mV and current density achieved at 10 mA/cm2 anin 1.0 M KOH. The composites are characterized by SEM, HR-TEM, X-ray diffraction, XPS, and SAED. The NiCo2O3/P having high durability measured for 50 hours and its EIS results holding a small charge transfer resistance 28.81 Ohms (Ω) and capacitance containing 0.81 mF. Finally, we give an outlook for the development of these nanoma-terials in the short- and mid-term, highlighting the critical challenges to confront for a lab-to-real life transition of these highly promising nanocomposites.

2015 ◽  
Vol 17 (1) ◽  
pp. 18-22 ◽  
Author(s):  
Bogusław Pierożyński ◽  
Tomasz Mikołajczyk

Abstract The electrochemical activity towards hydrogen evolution reaction (HER) was studied on commercially available (Toho-Tenax) and Ru-modified nickel-coated carbon fibre (NiCCF) materials. Quality and extent of Ru electrodeposition on NiCCF tows were examined by means of scanning electron microscopy (SEM). Kinetics of the hydrogen evolution reaction were investigated at room temperature, as well as over the temperature range: 20-50°C in 0.1 M NaOH solution for the cathodic overpotential range: -100 to -300 mV vs. RHE. Corresponding values of charge-transfer resistance, exchange current-density for the HER and other electrochemical parameters for the examined fibre tow composites were recorded.


Author(s):  
Vladimir I. Kichigin ◽  

The shape of the charge transfer resistance Rct versus overpotentialh curves for the hydrogen evolution reaction (Volmer – Heyrovsky mechanism, Langmuir isotherm for adsorbed hydrogen) was analyzed. It was shown that, depending on the kinetic parameters of reaction steps, three cases are possible: (i) there are no extrema on these curves; (ii) there is one maximum; (iii) there are a minimum and a maximum. Some ways for obtaining kinetic parameters from the curves with extrema are discussed. It was shown that the rate constants and transfer coefficients of all steps can be determined from logRct–h curve alone if there are a minimum and maximum of Rct in cathodic region. In the absence of the extrema, the amount of kinetic information gained from logRct–h plots is considerably reduced.


2020 ◽  
Vol 10 (9) ◽  
pp. 3087 ◽  
Author(s):  
Hagyeong Kwon ◽  
Dongyeon Bae ◽  
Hyeyoung Jun ◽  
Byungdo Ji ◽  
Dongyeun Won ◽  
...  

We report the electrochemical hydrogen evolution reaction (HER) of two-dimensional metallic transition metal dichalcogenides (TMDs). TMTe2 (TM: Mo, W, and V) single crystals were synthesized and characterized by optical microscopy, X-ray diffraction, and electrochemical measurements. We found that TMTe2 acts as a HER-active catalyst due to the inherent catalytic activity of its basal planes. Among the three metallic TMTe2, VTe2 shows the best HER performance with an overpotential of 441 mV and a Tafel slope of 70 mV/dec. It is 668 mV and 137 mV/dec for MoTe2 and 692 mV and 169 mV/dec for WTe2. Even though VTe2 has the lowest values in the exchange current density, the active site density, and turn-over-frequency (TOF) among the three TMTe2, the lowest charge transfer resistance (RCT) of VTe2 seems to be critical to achieving the best HER performance. First-principles calculations revealed that the basal-plane-active HER performance of metallic TMDs can be further enhanced with some Te vacancies. Our study paves the way to further study of the inherent catalytic activity of metallic 2D materials for active hydrogen production.


2018 ◽  
Vol 15 (2) ◽  
pp. 178-187
Author(s):  
Lixin Wang ◽  
Peipei Zhang ◽  
Lei Bai ◽  
Lei Cao ◽  
Jing Du ◽  
...  

Background: Ni/rGO composite electrode has been fabricated by facile supergravity electrodeposition as a low-cost catalyst for efficient hydrogen evolution in alkaline media. In this paper, the electrodeposition time is the main research variable. When the electrodeposition time is 100 minutes, the Ni/rGO-100 catalyst manifests the highest electrocatalytic activity toward the hydrogen evolution reaction (HER). In 1.0 M NaOH solution, the overpotential at a current density of 100 mA cm-2, Tafel slope and charge transfer resistance of Ni/rGO-100 catalyst is 184 mV, 77 mV dec-1 and 4.173 Ω, respectively. In addition, Ni/rGO-100 catalyst shows a long-term durability at a constant current density of 100 mA cm-2 for 10 h. The outstanding HER electrocatalytic performance of the Ni/rGO-100 is mainly related to the synergetic combination of Ni and rGO, as well as the enlarged exposure of catalytically active sites and improved transport of electrons arising from the good conductivity of graphene. Method: In a classic experiment, GO was prepared by modified Hummers method. The Ni/rGO composite electrodes were prepared by supergravity electrodeposition, which has been reported in detail in our published paper. Firstly, a ø10 cm × 2 cm Ni foam circle was cleaned sequentially in HCl solution (15%), acetone and DI water for 5 min with ultrasonication to be used as a cathode. And a pure nickel pipe was used as anode. The Ni/rGO composite cathodes were electrodeposited in a blackish green plating bath which contained 350 g L-1 Ni(NH2SO3)2·6H2O, 10g L-1 NiCl2·6H2O, 30 g L-1 NH4Cl , 1.0 g L-1 GO colloidal solution with different electrodeposition time, 10min, 30min, 60min, 80min, 100min, respectively. The pH value of the plating bath is 3.5-3.8. The above five electrodes were respectively denominated as Ni/rGO-10, Ni/rGO-30, Ni/rGO-60, Ni/rGO-80, Ni/rGO-100. All composite electrodes were performed under the strength of the supergravity with G=350 g at a current density of 3 A dm-2 at 318 K. Afterwards the Ni foam coated with Ni/rGO hybrid was taken out of the reaction vessel, followed by washing with deionized water to remove physical adsorption residua, and then dried at 80°C. Results: In this paper, the electrodeposition time is the main research variable. When the electrodeposition time is 100 minutes, the Ni/rGO-100 catalyst manifests the highest electrocatalytic activity toward the hydrogen evolution reaction (HER). In 1.0 M NaOH solution, the overpotential at a current density of 100 mA cm-2, Tafel slope and charge transfer resistance of Ni/rGO-100 catalyst is 184 mV, 77 mV dec-1 and 4.173 Ω, respectively. In summary, we have synthesized a class of composite electrodes (Ni/rGO) for HER in alkaline solution by electrodeposition under supergravity field. We studied the effect of electrodeposition time on electrode performance in detail. With the increase of electrodeposition time, the number of active sites is enlarged provided by the electrode. When the electrodeposition time is 100 min, we fabricate the best electrode (Ni/rGO-100). The η100, Tafel slope and charge transfer resistance of Ni/rGO-100 is 184 mV, 77 mV dec-1 and 4.173 Ω, respectively. The introduction of graphene and supergravity field plays a key role in improving the performance of the electrodes. This work is a pivotal part of the development of Ni/rGO as a non-precious HER catalyst for green energy field.


Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 625 ◽  
Author(s):  
Tomasz Mikolajczyk ◽  
Mateusz Luba ◽  
Boguslaw Pierozynski ◽  
Lech Smoczynski

The present paper reports AC impedance spectroscopic/Tafel polarization and cyclic voltammetry study on the influence of acetonitrile concentration on the kinetics of UPD of H (underpotential deposition of hydrogen) and HER (hydrogen evolution reaction), examined on polycrystalline and polyoriented single-crystal sphere Pt electrode surfaces in 0.5 M H2SO4 and 0.1 M NaOH supporting solutions. The resulted data provided confirmation of the destructive role of Pt surface-electrosorbed acetonitrile on the kinetics of underpotentially deposited hydrogen, as well as cathodic hydrogen evolution reaction. The above was exclusively elucidated through evaluation of the associated charge-transfer resistance and capacitance (and complementary exchange current-density and Tafel slope) parameters, derived comparatively on Pt for pure and acetonitrile-modified acidic and alkaline electrolytes.


2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Yingjie Yang ◽  
Yanhui Yu ◽  
Jing Li ◽  
Qingrong Chen ◽  
Yanlian Du ◽  
...  

AbstractThe investigation of highly effective, durable, and cost-effective electrocatalysts for the hydrogen evolution reaction (HER) is a prerequisite for the upcoming hydrogen energy society. To establish a new hydrogen energy system and gradually replace the traditional fossil-based energy, electrochemical water-splitting is considered the most promising, environmentally friendly, and efficient way to produce pure hydrogen. Compared with the commonly used platinum (Pt)-based catalysts, ruthenium (Ru) is expected to be a good alternative because of its similar hydrogen bonding energy, lower water decomposition barrier, and considerably lower price. Analyzing and revealing the HER mechanisms, as well as identifying a rational design of Ru-based HER catalysts with desirable activity and stability is indispensable. In this review, the research progress on HER electrocatalysts and the relevant describing parameters for HER performance are briefly introduced. Moreover, four major strategies to improve the performance of Ru-based electrocatalysts, including electronic effect modulation, support engineering, structure design, and maximum utilization (single atom) are discussed. Finally, the challenges, solutions and prospects are highlighted to prompt the practical applications of Ru-based electrocatalysts for HER.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Panlong Zhai ◽  
Mingyue Xia ◽  
Yunzhen Wu ◽  
Guanghui Zhang ◽  
Junfeng Gao ◽  
...  

AbstractRational design of single atom catalyst is critical for efficient sustainable energy conversion. However, the atomic-level control of active sites is essential for electrocatalytic materials in alkaline electrolyte. Moreover, well-defined surface structures lead to in-depth understanding of catalytic mechanisms. Herein, we report a single-atomic-site ruthenium stabilized on defective nickel-iron layered double hydroxide nanosheets (Ru1/D-NiFe LDH). Under precise regulation of local coordination environments of catalytically active sites and the existence of the defects, Ru1/D-NiFe LDH delivers an ultralow overpotential of 18 mV at 10 mA cm−2 for hydrogen evolution reaction, surpassing the commercial Pt/C catalyst. Density functional theory calculations reveal that Ru1/D-NiFe LDH optimizes the adsorption energies of intermediates for hydrogen evolution reaction and promotes the O–O coupling at a Ru–O active site for oxygen evolution reaction. The Ru1/D-NiFe LDH as an ideal model reveals superior water splitting performance with potential for the development of promising water-alkali electrocatalysts.


Author(s):  
Hanwen Xu ◽  
Jiawei Zhu ◽  
Pengyan Wang ◽  
Ding Chen ◽  
Chengtian Zhang ◽  
...  

Rational design and construction of high-efficiency bifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is crucial for large-scale hydrogen production by water splitting. Herein, by a...


Sign in / Sign up

Export Citation Format

Share Document