scholarly journals Analysis of Local Air–Sea Interaction in East Asia Using a Regional Air–Sea Coupled Model

2012 ◽  
Vol 25 (2) ◽  
pp. 767-776 ◽  
Author(s):  
Huang Qian ◽  
Yao Suxiang ◽  
Zhang Yaocun
Keyword(s):  
Heat Flux ◽  
Wind Speed ◽  
Solar Radiation ◽  
South China Sea ◽  
Climate Model ◽  
Sensible Heat Flux ◽  
Coupled Model ◽  
Sea Surface ◽  
Sensible Heat ◽  
Flux Evaporation

Abstract A regional air–sea coupled climate model based on the third regional climate model (RegCM3) and the regional oceanic model [the Princeton Ocean Model (POM)] is used to analyze the local air–sea interaction over East Asia in this study. The results indicate that the simulated sea surface temperature (SST) of the coupled model RegCM3–POM is reasonably accurate, and that the spatial pattern and temporal variation are consistent with that of the Global Sea Ice and Sea Surface Temperature dataset (GISST). The correlation between the SST and the atmospheric variables shows that the uncoupled model RegCM3 forced by the given SST cannot reproduce the real-time and SST lag correlation between SST and precipitation, and between SST and surface wind speed, whereas the relationship in the coupled model RegCM3–POM is reasonably accurate. RegCM3–POM reflects the air–sea interaction in the South China Sea and western Pacific Ocean, where the SST lead correlation is the inverse of the SST lag correlation between SST and precipitation, and strong winds bring warm water to the midlatitudes, so the correlation between wind speed and SST is negative in low latitudes and positive in the Kuroshio area. The uncoupled model fails to reproduce the effect of the atmosphere on the ocean. The further study on air–sea interaction in the South China Sea indicates that the earlier warm seawater corresponds to strong sensible heat flux, evaporation, precipitation, and weak net solar radiation, and the early strong sensible heat flux, evaporation, wind at the 10-m level, and weak net solar radiation cause the cold SST.

Sensible Heat Flux in Near-Neutral Conditions over the Sea

2012 ◽  
Vol 42 (7) ◽  
pp. 1134-1142 ◽  
Author(s):  
L. Mahrt ◽  
Dean Vickers ◽  
Edgar L Andreas ◽  
Djamal Khelif
Keyword(s):  
Heat Flux ◽  
Wind Speed ◽  
Surface Temperature ◽  
Sensible Heat Flux ◽  
Sea Surface ◽  
Sensible Heat ◽  
Stable Conditions ◽  
Weakly Stable ◽  
Weak Winds ◽  
Neutral Conditions

Abstract The variation of the sea surface sensible heat flux is investigated using data from the Gulf of Tehuantepec Experiment (GOTEX) and from eight additional aircraft datasets representing a variety of surface conditions. This analysis focuses on near-neutral conditions because these conditions are common over the sea and are normally neglected, partly because of uncertain reliability of measurements of the small air–sea temperature difference. For all of the datasets, upward heat flux is observed for slightly stable conditions. The frequency of this “countergradient” heat flux increases with increasing wind speed and is possibly related to sea spray or microscale variations of surface temperature on the wave scale. Upward area-averaged sensible heat flux for slightly stable conditions can also be generated by mesoscale heterogeneity of the sea surface temperature (SST). Significant measurement errors cannot be ruled out. The countergradient heat flux for weakly stable conditions is least systematic for weaker winds, even though it occurs with weak winds in all of the datasets. In an effort to reduce offset errors and different SST processing and calibration procedures among field programs, the authors adjusted the SST in each field program to minimize the countergradient flux for weak winds. With or without this adjustment for the combined dataset, the extent of the upward heat flux for weakly stable conditions increases with increasing wind speed.

scholarly journals Updated cloud physics in a regional atmospheric climate model improves the modelled surface energy balance of Antarctica

2014 ◽  
Vol 8 (1) ◽  
pp. 125-135 ◽  
Author(s):  
J. M. van Wessem ◽  
C. H. Reijmer ◽  
J. T. M. Lenaerts ◽  
W. J. van de Berg ◽  
M. R. van den Broeke ◽  
...  
Keyword(s):  
Heat Flux ◽  
Energy Balance ◽  
Surface Energy ◽  
Surface Energy Balance ◽  
Climate Model ◽  
Sensible Heat Flux ◽  
Sensible Heat ◽  
Ice Cloud ◽  
Long Wave ◽  
Regional Atmospheric Climate Model

Abstract. In this study the effects of changes in the physics package of the regional atmospheric climate model RACMO2 on the modelled surface energy balance, near-surface temperature and wind speed of Antarctica are presented. The physics package update primarily consists of an improved turbulent and radiative flux scheme and a revised cloud scheme that includes a parameterisation for ice cloud super-saturation. The ice cloud super-saturation has led to more moisture being transported onto the continent, resulting in more and optically thicker clouds and more downward long-wave radiation. Overall, the updated model better represents the surface energy balance, based on a comparison with >750 months of data from nine automatic weather stations located in East Antarctica. Especially the representation of the turbulent sensible heat flux and net long-wave radiative flux has improved with a decrease in biases of up to 40%. As a result, modelled surface temperatures have increased and the bias, when compared to 10 m snow temperatures from 64 ice-core observations, has decreased from −2.3 K to −1.3 K. The weaker surface temperature inversion consequently improves the representation of the sensible heat flux, whereas wind speed biases remain unchanged. However, significant model biases remain, partly because RACMO2 at a resolution of 27 km is unable to resolve steep topography.

The Nocturnal Wind Speed and Sensible Heat Flux Over Flat Terrain

2020 ◽  
Vol 176 (3) ◽  
pp. 401-413
Author(s):  
A. Lapworth ◽  
S. R. Osborne
Keyword(s):  
Heat Flux ◽  
Wind Speed ◽  
Sensible Heat Flux ◽  
Sensible Heat ◽  
Flat Terrain

scholarly journals Technical note: Using distributed temperature sensing for Bowen ratio evaporation measurements

2018 ◽  
Vol 22 (1) ◽  
pp. 819-830 ◽  
Author(s):  
Bart Schilperoort ◽  
Miriam Coenders-Gerrits ◽  
Willem Luxemburg ◽  
César Jiménez Rodríguez ◽  
César Cisneros Vaca ◽  
...  
Keyword(s):  
Heat Flux ◽  
Energy Balance ◽  
Solar Radiation ◽  
Sensible Heat Flux ◽  
Bowen Ratio ◽  
Temperature Sensing ◽  
Sensible Heat ◽  
Distributed Temperature Sensing ◽  
Available Energy ◽  
Air Column

Abstract. Rapid improvements in the precision and spatial resolution of distributed temperature sensing (DTS) technology now allow its use in hydrological and atmospheric sciences. Introduced by ) is the use of DTS for measuring the Bowen ratio (BR-DTS), to estimate the sensible and latent heat flux. The Bowen ratio is derived from DTS-measured vertical profiles of the air temperature and wet-bulb temperature. However, in previous research the measured temperatures were not validated, and the cables were not shielded from solar radiation. Additionally, the BR-DTS method has not been tested above a forest before, where temperature gradients are small and energy storage in the air column becomes important. In this paper the accuracy of the wet-bulb and air temperature measurements of the DTS are verified, and the resulting Bowen ratio and heat fluxes are compared to eddy covariance data. The performance of BR-DTS was tested on a 46 m high tower in a mixed forest in the centre of the Netherlands in August 2016. The average tree height is 26 to 30 m, and the temperatures are measured below, in, and above the canopy. Using the vertical temperature profiles the storage of latent and sensible heat in the air column was calculated. We found a significant effect of solar radiation on the temperature measurements, leading to a deviation of up to 3 K. By installing screens, the error caused by sunlight is reduced to under 1 K. Wind speed seems to have a minimal effect on the measured wet-bulb temperature, both below and above the canopy. After a simple quality control, the Bowen ratio measured by DTS correlates well with eddy covariance (EC) estimates (r2 = 0.59). The average energy balance closure between BR-DTS and EC is good, with a mean underestimation of 3.4 W m−2 by the BR-DTS method. However, during daytime the BR-DTS method overestimates the available energy, and during night-time the BR-DTS method estimates the available energy to be more negative. This difference could be related to the biomass heat storage, which is neglected in this study. The BR-DTS method overestimates the latent heat flux on average by 18.7 W m−2, with RMSE = 90 W m−2. The sensible heat flux is underestimated on average by 10.6 W m−2, with RMSE = 76 W m−2. Estimates of the BR-DTS can be improved once the uncertainties in the energy balance are reduced. However, applying, for example, Monin–Obukhov similarity theory could provide independent estimates for the sensible heat flux. This would make the determination of the highly uncertain and difficult to determine net available energy redundant.

Climate and Vegetation in the Middle East: Interannual Variability and Drought Feedbacks

2007 ◽  
Vol 20 (15) ◽  
pp. 3924-3941 ◽  
Author(s):  
Benjamin F. Zaitchik ◽  
Jason P. Evans ◽  
Roland A. Geerken ◽  
Ronald B. Smith
Keyword(s):  
Heat Flux ◽  
Interannual Variability ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Vegetation Index ◽  
Climate Model ◽  
Sensible Heat Flux ◽  
Radiation Balance ◽  
Turbulent Heat ◽  
Sensible Heat

Abstract The Euphrates Plain (EP) experiences large interannual variability in vegetation cover, especially in areas of marginal rain-fed agriculture. Vegetation in this region is primarily limited by available soil moisture, as determined by winter precipitation, spring precipitation, and air temperature. Satellite analyses indicate that the springtime normalized difference vegetation index (NDVI) is negatively correlated with surface albedo, and that interannual variability in albedo in the EP produces an estimated forcing on the radiation balance that peaks at 16.0 W m−2 in May. Simulations with a regional climate model indicate that surface energy fluxes during a drought year (1999) differed substantially from those during a year with normal precipitation (2003). These differences were geographically specific, with the EP exhibiting increased albedo and decreased sensible heat flux while the neighboring Zagros Plateau region showed no albedo effect, a large increase in sensible heat flux, and an offsetting reduction in latent heat flux. In both the EP and the Zagros there was a potential for positive feedbacks on temperature and drought in late spring, though the most likely feedback mechanisms differed between the two regions: in the EP surface brightening leads to cooling and reduced turbulent heat flux, while in the Zagros region reduced latent heat flux leads to warming and a deepening of the planetary boundary layer.

scholarly journals Estimation of Sensible Heat Flux and Atmospheric Boundary Layer Height Using an Unmanned Aerial Vehicle

Atmosphere ◽  
2019 ◽  
Vol 10 (7) ◽  
pp. 363 ◽  
Author(s):  
Min-Seong Kim ◽  
Byung Hyuk Kwon
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Wind Speed ◽  
Atmospheric Boundary Layer ◽  
Unmanned Aerial Vehicle ◽  
Sensible Heat Flux ◽  
Eddy Correlation ◽  
Sensible Heat ◽  
Aerial Vehicle ◽  
Transfer Method

In this work, sensible heat flux estimated using a bulk transfer method was validated with a three-dimensional ultrasonic anemometer or surface layer scintillometer at various sites. Results indicate that it remains challenging to obtain temperature and wind speed at an appropriate reference height. To overcome this, alternative observations using an unmanned aerial vehicle (UAV) were considered. UAV-based wind speed and sensible heat flux were indirectly estimated and atmospheric boundary layer (ABL) height was then derived using the sensible heat flux data. UAV-observed air temperature was measured by attaching a temperature sensor 40 cm above the rotary-wing of the UAV, and UAV-based wind speed was estimated using attitude data (pitch, roll, and yaw angles) recorded using the UAV’s inertial measurement unit. UAV-based wind speed was close to the automatic weather system-observed wind speed, within an error range of approximately 10%. UAV-based sensible heat flux estimated from the bulk transfer method corresponded with sensible heat flux determined using the eddy correlation method, within an error of approximately 20%. A linear relationship was observed between the normalized UAV-based sensible heat flux and radiosonde-based normalized ABL height.

scholarly journals Calculation of sensible-heat flux over a melting ice surface using simple climate data and daily measurements of ablation

2009 ◽  
Vol 50 (50) ◽  
pp. 9-15 ◽  
Author(s):  
Roger J. Braithwaite
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Transfer Coefficient ◽  
Wind Speed ◽  
Transfer Coefficient ◽  
Sensible Heat Flux ◽  
Sensible Heat ◽  
Climate Data ◽  
Transfer Coefficients ◽  
Monthly Basis

AbstractSensible-heat flux is obviously important for glacier ablation but is difficult to measure routinely. Sensible-heat flux can be estimated from wind-speed and temperature data using a dimensionless heat-transfer coefficient. Values of the heat-transfer coefficient are evaluated for six sites by correlating measured melt energy with a wind–temperature variable (product of daily mean wind speed, temperature and mean atmospheric pressure for the altitude in question). Data are available for short periods from two sites in Arctic Canada and two sites in North Greenland, and for hundreds of days of record at Nordbogletscher and Qamanârssûp sermia in South and West Greenland, respectively. Average transfer coefficients for four out of the six sites are close to 0.003, which is in reasonable agreement with values reported elsewhere, while larger values of 0.0047 and 0.0057 are found at the other two sites. Heat-transfer coefficients are also estimated on a monthly basis for the two long records, and substantial variations are found, suggesting that the method should not be used for <20–30 days of data. The present study is based on manually observed ablation and climate data, but the approach could be updated to use data from automatic recording stations using modern sensors.

scholarly journals Characteristics of the summer atmospheric boundary layer height over the Tibetan Plateau and influential factors

2020 ◽  
Author(s):  
Junhui Che ◽  
Ping Zhao
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Tibetan Plateau ◽  
Solar Radiation ◽  
Atmospheric Boundary Layer ◽  
Sensible Heat Flux ◽  
Influential Factors ◽  
The Tibetan Plateau ◽  
Height Distribution ◽  
Sensible Heat

Abstract. Based on intensive sounding, surface sensible heat flux, solar radiation, and soil moisture observational datasets from the Third Tibetan Plateau Atmospheric Scientific Experiment and the routine meteorological operational sounding and total cloudiness datasets in the Tibetan Plateau (TP) for the period 2013–2015, we investigate the features of summer atmospheric boundary layer (ABL) over the TP and its major influential factors. It is found that the convective boundary layer (CBL) and the neutral boundary layer (NBL) show remarkable diurnal variations over the TP, while the stable boundary layer (SBL) diurnal variation is weak. In the early morning, the ABL height distribution is narrow, with a small west-east difference. The SBL accounts for 85 % of the TP ABL. At noon, there is a wide distribution in the ABL height up to 4000 m. The CBL accounts for 77 % of the TP ABL, with more than 50 % of the CBL height above 1900 m. The ABL height exhibits a large west-east difference, with a mean height above 2000 m in the western TP and around 1500 m in the eastern TP. In the late afternoon, the CBL and SBL dominate the western and eastern TP, respectively, resulting in a larger west-east difference of 1054.2 m between the western and eastern TP. The high ABL height in a cold environment over the western TP (relative to the plain areas) is similar to that in some extreme hot and arid areas such as Dunhuang and Taklimakan Deserts. For the western (eastern) TP, there is low (high) total cloud coverage, with large (small) solar radiation at the surface and dry (wet) soil. These features result in high (low) sensible heat flux and thus promotes (inhibits) the local ABL development.

Sign in / Sign up

Export Citation Format

Share Document