air column
Recently Published Documents


TOTAL DOCUMENTS

170
(FIVE YEARS 36)

H-INDEX

17
(FIVE YEARS 2)

Micromachines ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 109
Author(s):  
Yuta Matsumoto ◽  
Yuki Mizushima ◽  
Toshiyuki Sanada

Filling microstructures in the air with liquid or removing trapped gases from a surface in a liquid are required in processes such as cleaning, bonding, and painting. However, it is difficult to deform the gas–liquid interface to fill a small hole with liquid when surface tension has closed one end. Therefore, it is necessary to have an efficient method of removing gas from closed-end holes in liquids. Here, we demonstrate the gas-removing method using acoustic waves from small holes. We observed gas column oscillation by changing the hole size, wettability, and liquid surface tension to clarify the mechanism. First, we found that combining two different frequencies enabled complete gas removal in water within 2 s. From high-speed observation, about half of the removal was dominated by droplet or film formation caused by oscillating the gas column. The other half was dominated by approaching and coalescing the divided gas column. We conclude that the natural frequency of both the air column and the bubbles inside the tube are important.


2021 ◽  
Author(s):  
Anna Napoli ◽  
Fabien Desbiolles ◽  
Antonio Parodi ◽  
Claudia Pasquero

Abstract. Aerosols play a crucial role in climate through different feedback mechanisms, affecting radiation, clouds and air column stability. This study focuses on the altitude-dependence of the cloud mediated indirect effects of aerosols in the Great Alpine Region (GAR), an area characterised by high pollution levels from anthropic activities in the Po Valley and a complex orography with the highest mountains in Europe. Using a regional atmospheric model, 5-years long convective-permitting sensitivity experiments have been run with different surface aerosol fluxes. The results show that seasonal mean cloud cover, temperature, and precipitations are affected by the aerosol concentrations in the air column, and that the response to pollution is both elevation and season dependent. The overall cloud cover increase with aerosol levels leads to either surface cooling or warming depending on the surface albedo (snow covered or not). Furthermore, different types of clouds have a different sensitivity to aerosols: while the lifetime of low pressure system clouds and orographic clouds is generally increased at high levels of aerosols, convective clouds (typical of the summer season) can actually decrease at high levels of pollution, due to the reduction of strong updrafts.


2021 ◽  
Vol 925 (1) ◽  
pp. 012056
Author(s):  
L R Saputra ◽  
I M Radjawane ◽  
H Park ◽  
H Gularso

Abstract The influence of seawater parameters cannot be ignored when conducting bathymetric LiDAR (Laser Induced Detection and Ranging or Light Detection and Ranging) surveys such as turbidity, temperature, and salinity. Turbidity affects the attenuation diffusion coefficient of the green laser is penetrating the air column. The comparison of LiDAR bathymetric depth with Secchi disk depth is used as a reference in determining the effect of turbidity. The results are in locations with primarily clear water the ability of LiDAR can penetrate up to 7m, while in turbid waters up to 3m. On average, the ability of the green laser LiDAR bathymetry can penetrate the waters of 1.5-2 times the depth at the location of this study around the bay of Lampung Indonesia. Other water parameters are temperature and salinity. These parameters are used to calculate the refractive index value of water. The Different temperature and salinity values in a water column can result in differences in the accuracy of the bathymetry LiDAR depth of 4-6mm. The influence of water column parameters can be a concern in planning and processing airborne LiDAR altimetry (ALB) surveys.


2021 ◽  
Vol 2090 (1) ◽  
pp. 012154
Author(s):  
R A Gerasimov

Abstract The article discusses the influence of geometric parameters (the presence and magnitude of the radius of curvature) at the junction of the toneholes with the main bore of the air column on the frequency characteristics of woodwind musical instruments. A theoretical calculation of the eigenfrequencies of an air column with one tonehole in the case of sharp edges has been carried out. The resonance frequencies were also found using computer simulation in the COMSOL Multiphysics 5.5 program for the case of sharp edges and joints with a radius of curvature. An empirical dependence of the frequency of the main tone of the air column on the radius of curvature of the edges of the tonehole is obtained. All simulation were carried out for two models: excluding and including viscous drag and thermal exchange losses.


Author(s):  
Yuri Kopanytsia

A reliable non-contact pneumatic pressure regulator of a pressure hydrocyclone is offered. The regulator is installed in the area of ​​the sand nozzle. The pneumatic regulator of the standard pressure cylindrical-conical hydrocyclone provides non-contact thickening of the product in the area of ​​the sand nozzle. In the process of controlling the operation of the hydrocyclone along its axis, an air column is formed. Features of the regulator affect the formation of the air column of the hydrocyclone. The pressure in the air column is manometric. The task is to investigate the effect of pulp pressure at the inlet of the hydrocyclone, pulp thickening and air column pressure. Experimental studies were performed in the laboratory on a model of a standard industrial cylindrical-conical hydrocyclone HC360. The connection between the technological parameters of the hydrocyclone operation and the pressure in the air column has been studied. to establish possibilities of control of work of a hydrocyclone on pressure in an air column. The planning of the experiment in the laboratory on a hydrocyclone model was performed in the program Statgraphics Centurion XV. Experimental studies were performed for the optimal parameters of the angle and slit of the pneumatic regulator. The optimization criterion is chosen – the maximum effect of pulp thickening while minimizing local energy losses in the nozzle. In laboratory conditions, the change in pulp pressure and density at the inlet of the hydrocyclone over the entire operating range is simulated. The laboratory model of the hydrocyclone was made on a scale of M1:10. Flotation waste was used as pulp. Modeling of hydrocyclone operation as a part of water-sludge system at the concentrator is carried out. The density of the solid phase is 1500 kg/m3. The solids content at the inlet is 10 g/l. Samples were taken by volumetric measurement with a measuring vessel. A statistically significant relationship between the pressure in the air column of the hydrocyclone and the effect of pulp thickening in a standard cylindrical-conical hydrocyclone was established. The presence of the linear character of the dependence of the coefficient of thickening and pressure in the air column of the hydrocyclone with the pneumatic regulator is checked. The absence of a statistically significant effect of hydrocyclone supply pressure on the dependence of other selected factors was established. Experimental studies were carried out at the optimal design parameters of the pneumatic regulator according to the criteria of minimizing the loss of energy of air current in the nozzle and minimizing the volumetric flow of air.


Author(s):  
Hao Fu ◽  
Morgan O’Neill

AbstractTropical deep convection plays a key role in the tropical depression stage of tropical cyclogenesis by aggregating vorticity, but no existing theory can depict such a stochastic vorticity aggregation process. A vorticity probability distribution function (PDF) is proposed as a tool to predict the horizontal structure and wind speed of the tropical depression. The reason lies in the tendency for a vortex to adjust to an axisymmetric and monotonic vorticity structure. Assuming deep convection as independent and uniformly distributed vortex tube stretching events in the low-mid troposphere, repetitive vortex tube stretching will make the air column area shrink many times and significantly increase vorticity. A theory of the vorticity PDF is established by modelling the random stretching process as a Markov chain. The PDF turns out to be a weighted Poisson distribution, in good agreement with a randomly-forced divergent barotropic model (weak temperature gradient model), and in rough agreement with a cloud-permitting simulation. The result shows that a stronger and sparser deep convective mode tends to produce more high vorticity air columns, which leads to a more compact major vortex with a higher maximum wind. Based on the vorticity PDF theory, a parameterization of the eddy acceleration effect on the tangential flow is proposed.


QJM ◽  
2021 ◽  
Vol 114 (Supplement_1) ◽  
Author(s):  
Amira Ahmed Elsayed ◽  
Mona Mansour ◽  
Tamer Mohamed Ali

Abstract Background Cuff leak test (CLT) has been used widely to assess upper airway patency before extubation but with low positive predictive value. Aim To assess the diagnostic accuracy of the airway column width ratio (ACWR) in predicting postextubation stridor (PES). Patients and methods 50 Patients who intubated >24 hours were observed for postextubation stridor and reintubation. Laryngeal ultrasound was done to measure the ACW with ETT cuff deflated immediately after intubation and 3–4 h before extubation. Cuff leak test was done. Results Fifty patients were included with mean age 58 ± 14.71 years, 68% were males and 32% were females. PES developed in 8% of patients. There was highly statistically significant difference between both groups regarding ACW before extubation and ACW ratio (p-value =0.006 and 0.000 respectively). The mean ACW ratio in stridor group (0.79 ± 0.03) was significantly lower than in non-stridor group (0.94 ± 0.04). Reintubation was higher in stridor group (100%) than non-stridor group (23.9%), P = 0.001. There was statistically significant higher duration of mechanical ventilation in stridor group (7.50 ± 0.58 vs. 4.23 ± 2.50 days, P = 0.013). A cut off point of ACW ratio ≤0.81 has a sensitivity 100% and Specificity 100%. Conclusion ACW showed excellent utility in prediction of patients with PES. Air column width ratio of ≤ 0.81 was a good predictor of PES.


2021 ◽  
Vol 13 (15) ◽  
pp. 2960
Author(s):  
Andrzej Araszkiewicz ◽  
Damian Kiliszek ◽  
Michał Mierzwiak ◽  
Joanna Nowak Da Costa ◽  
Marcin Szołucha

An increase in temperature causes higher evaporation of water from water bodies; consequently, the water content in the atmosphere also increases. The precipitable water (PW), as the water content in the atmospheric air column, is therefore an important parameter to consider when studying climate change. The aim of this study was to analyse multi-annual precipitable water data derived from a dense Global Navigational Satellite Systems (GNSS) network. Twelve years of observations from over a hundred ASG-EUPOS stations were used to estimate changes in precipitation water values over Poland. The data were validated by comparison with the available radio-sounding data. The analysis of the GPS-based PW values showed an upward trend in the PW value of 0.078 mm/year. The spatio-temporal distribution of the mean PW values and their fluctuations over the years were studied and visualised in the form of maps. The results are congruent with the fact that Poland lies on the border of influence of both continental and oceanic climates. Our results are also consistent with other climate research concerning this region.


2021 ◽  
Vol 73 (1) ◽  
Author(s):  
Kana Hashimoto ◽  
Ikuro Sumita

AbstractBasaltic magma becomes more viscous, solid-like (elastic), and non-Newtonian (shear-thinning, non-zero yield stress) as its crystal content increases. However, the rheological effects on bubble bursting and airwave excitation are poorly understood. Here we conduct laboratory experiments to investigate these effects by injecting a bubble of volume V into a refractive index-matched suspension consisting of non-Brownian particles (volumetric fraction $$\phi$$ ϕ ) and a Newtonian liquid. We show that depending on $$\phi$$ ϕ and V, airwaves with diverse waveforms are excited, covering a frequency band of $$f = {\mathcal {O}}(10-10^4)$$ f = O ( 10 - 10 4 ) Hz. In a suspension of $$\phi \le 0.3$$ ϕ ≤ 0.3 or in a suspension of $$\phi = 0.4$$ ϕ = 0.4 with a V smaller than critical, the bubble bursts after it forms a hemispherical cap at the surface and excites a high-frequency (HF) wave ($$f \sim 1-2 \times 10^4$$ f ∼ 1 - 2 × 10 4 Hz) with an irregular waveform, which likely originates from film vibration. However, in a suspension of $$\phi = 0.4$$ ϕ = 0.4 and with a V larger than critical, the bubble bursts as soon as it protrudes above the surface, and its aperture opens slowly, exciting Helmholtz resonance with $$f = {\mathcal {O}}(10^3)$$ f = O ( 10 3 ) Hz. Superimposed on the waveform are an HF wave component excited upon bursting and a low-frequency ($$f = {\mathcal {O}}(10)$$ f = O ( 10 ) Hz) air flow vented from the deflating bubble, which becomes dominant at a large V. We interpret this transition as a result of the bubble film of a solid-like $$\phi = 0.4$$ ϕ = 0.4 suspension, being stretched faster than the critical strain rate such that it bursts by brittle failure. When the Helmholtz resonance is excited by a bursting bubble in a suspension whose surface level is further below the conduit rim, an air column (length L) resonance is triggered. For L larger than critical, the air column resonance continues longer than the Helmholtz resonance because the decay rate of the former becomes less than that of the latter. The experiments suggest that a bubble bursting at basaltic volcanoes commonly excites HF wave by film vibration. The Helmholtz resonance is likely to be excited under a limited condition, but if detected, it may be used to track the change of magma rheology or bubble V, where the V can be estimated from its frequency and decay rate.


Sign in / Sign up

Export Citation Format

Share Document