Microphysical Properties of Ice Crystal Precipitation and Surface-Generated Ice Crystals in a High Alpine Environment in Switzerland

2017 ◽  
Vol 56 (2) ◽  
pp. 433-453 ◽  
Author(s):  
Oliver Schlenczek ◽  
Jacob P. Fugal ◽  
Gary Lloyd ◽  
Keith N. Bower ◽  
Thomas W. Choularton ◽  
...  

AbstractDuring the Cloud and Aerosol Characterization Experiment (CLACE) 2013 field campaign at the High Altitude Research Station Jungfraujoch, Switzerland, optically thin pure ice clouds and ice crystal precipitation were measured using holographic and other in situ particle instruments. For cloud particles, particle images, positions in space, concentrations, and size distributions were obtained, allowing one to extract size distributions classified by ice crystal habit. Small ice crystals occurring under conditions with a vertically thin cloud layer above and a stratocumulus layer approximately 1 km below exhibit similar properties in size and crystal habits as Antarctic/Arctic diamond dust. Also, ice crystal precipitation stemming from midlevel clouds subsequent to the diamond dust event was observed with a larger fraction of ice crystal aggregates when compared with the diamond dust. In another event, particle size distributions could be derived from mostly irregular ice crystals and aggregates, which likely originated from surface processes. These particles show a high spatial and temporal variability, and it is noted that size and habit distributions have only a weak dependence on the particle number concentration. Larger ice crystal aggregates and rosette shapes of some hundred microns in maximum dimension could be sampled as a precipitating cirrostratus cloud passed the site. The individual size distributions for each habit agree well with lognormal distributions. Fitted parameters to the size distributions are presented along with the area-derived ice water content, and the size distributions are compared with other measurements of pure ice clouds made in the Arctic and Antarctic.

2012 ◽  
Vol 12 (1) ◽  
pp. 503-525 ◽  
Author(s):  
A. Guignard ◽  
C. J. Stubenrauch ◽  
A. J. Baran ◽  
R. Armante

Abstract. This article presents a retrieval method and a statistical analysis of the bulk microphysical properties of semi-transparent ice clouds using the Atmospheric Infrared Sounder (AIRS). The method relies on spectral differences of cirrus emissivities in the 8–12 μm range and is sensitive to the effective ice crystal diameter (De) and ice water path (IWP) of up to 85 μm and 120 g m−2, respectively. An indication of the most frequent ice crystal habit in the cirrus has been obtained by using separately single scattering properties of column-like and aggregate-like ice crystals in the simulations. Uncertainties due to hypotheses on atmospheric parameters and ice crystal single scattering properties are discussed and the cirrus emissivity and temperature range for the applicability of the method are determined. To be sure that the cirrus only includes ice crystals, one has to restrict the cloud temperature range to Tcld<230 K. On a global scale, these semi-transparent ice clouds (cirrus) represent about 25% of all high clouds and are mainly encountered in the midlatitudes during winter and in the tropics, with an average De and IWP of 52 μm and 27 g m−2, respectively. A comparison with bulk microphysical properties from the TIROS-N Operational Vertical Sounder (TOVS) shows an agreement on global mean values. The addition of spectral information revealed improvements at the limits of the cirrus emissivity range. Collocated Radar-Lidar Geometrical Profiling (GEOPROF) data have been used to study the vertical structure of these clouds and to infer average ice water content (IWC) for cirrus with a small vertical extent. This allowed us to compare and contrast parameterizations of De as functions of IWC and IWP, respectively.


2011 ◽  
Vol 11 (9) ◽  
pp. 24671-24725
Author(s):  
A. Guignard ◽  
C. J. Stubenrauch ◽  
A. J. Baran ◽  
R. Armante

Abstract. This article presents a retrieval method and a statistical analysis of the bulk micropysical properties of semi-transparent ice clouds using the Atmospheric Infrared Sounder (AIRS). Global and long-term coverage provides information on the effective diameter (De) and habits of ice crystals in relation with their environment, ice water path (IWP) and temperature. The method relies on spectral absorption differences between 8 and 12 μm that depend on ice crystal properties. Using single scattering properties for column-like or aggregate-like ice crystals, the method is sensitive to De of up to 85 μm and IWP of up to 120 g m−2. Uncertainties due to the hypotheses on atmospheric parameters and ice crystal single scattering properties as well as horizontal heterogeneities have been demonstrated to be small. The behaviour of bulk microphysical properties as a function of temperature demonstrates that pure ice clouds only occur when Tcld<230 K. On a global scale, these clouds represent practically 25 % of all high clouds and are mainly encountered in the mid-latitudes during winter and in the tropics. Colocated Radar-Lidar Geometrical Profiling (GEOPROF) data reveal an increase in the vertical extent of these cloud layers during mid-latitude winter but which does not significantly impact ice crystal characteristics. A comparative study with bulk microphysical properties from the TIROS-N Operational Vertical Sounder (TOVS) reveals improvements, especially for optically thin and thick semi-transparent ice clouds. Finally, we investigated parametrizations of De as a function of IWP or Ice Water Content (IWC), which could be useful for modelling cirrus in General Circulation Models.


2013 ◽  
Vol 70 (1) ◽  
pp. 330-347 ◽  
Author(s):  
Ping Yang ◽  
Lei Bi ◽  
Bryan A. Baum ◽  
Kuo-Nan Liou ◽  
George W. Kattawar ◽  
...  

Abstract A data library is developed containing the scattering, absorption, and polarization properties of ice particles in the spectral range from 0.2 to 100 μm. The properties are computed based on a combination of the Amsterdam discrete dipole approximation (ADDA), the T-matrix method, and the improved geometric optics method (IGOM). The electromagnetic edge effect is incorporated into the extinction and absorption efficiencies computed from the IGOM. A full set of single-scattering properties is provided by considering three-dimensional random orientations for 11 ice crystal habits: droxtals, prolate spheroids, oblate spheroids, solid and hollow columns, compact aggregates composed of eight solid columns, hexagonal plates, small spatial aggregates composed of 5 plates, large spatial aggregates composed of 10 plates, and solid and hollow bullet rosettes. The maximum dimension of each habit ranges from 2 to 10 000 μm in 189 discrete sizes. For each ice crystal habit, three surface roughness conditions (i.e., smooth, moderately roughened, and severely roughened) are considered to account for the surface texture of large particles in the IGOM applicable domain. The data library contains the extinction efficiency, single-scattering albedo, asymmetry parameter, six independent nonzero elements of the phase matrix (P11, P12, P22, P33, P43, and P44), particle projected area, and particle volume to provide the basic single-scattering properties for remote sensing applications and radiative transfer simulations involving ice clouds. Furthermore, a comparison of satellite observations and theoretical simulations for the polarization characteristics of ice clouds demonstrates that ice cloud optical models assuming severely roughened ice crystals significantly outperform their counterparts assuming smooth ice crystals.


2017 ◽  
Vol 17 (11) ◽  
pp. 6865-6882 ◽  
Author(s):  
Päivi Haapanala ◽  
Petri Räisänen ◽  
Greg M. McFarquhar ◽  
Jussi Tiira ◽  
Andreas Macke ◽  
...  

Abstract. The impact of ice clouds on solar disk and circumsolar radiances is investigated using a Monte Carlo radiative transfer model. The monochromatic direct and diffuse radiances are simulated at angles of 0 to 8° from the center of the sun. Input data for the model are derived from measurements conducted during the 2010 Small Particles in Cirrus (SPARTICUS) campaign together with state-of-the-art databases of optical properties of ice crystals and aerosols. For selected cases, the simulated radiances are compared with ground-based radiance measurements obtained by the Sun and Aureole Measurements (SAM) instrument. First, the sensitivity of the radiances to the ice cloud properties and aerosol optical thickness is addressed. The angular dependence of the disk and circumsolar radiances is found to be most sensitive to assumptions about ice crystal roughness (or, more generally, non-ideal features of ice crystals) and size distribution, with ice crystal habit playing a somewhat smaller role. Second, in comparisons with SAM data, the ice cloud optical thickness is adjusted for each case so that the simulated radiances agree closely (i.e., within 3 %) with the measured disk radiances. Circumsolar radiances at angles larger than ≈ 3° are systematically underestimated when assuming smooth ice crystals, whereas the agreement with the measurements is better when rough ice crystals are assumed. Our results suggest that it may well be possible to infer the particle roughness directly from ground-based SAM measurements. In addition, the results show the necessity of correcting the ground-based measurements of direct radiation for the presence of diffuse radiation in the instrument's field of view, in particular in the presence of ice clouds.


2015 ◽  
Vol 15 (23) ◽  
pp. 34243-34281 ◽  
Author(s):  
A. E. Luebke ◽  
A. Afchine ◽  
A. Costa ◽  
J. Meyer ◽  
C. Rolf ◽  
...  

Abstract. The radiative role of ice clouds in the atmosphere is known to be important, but uncertainties remain concerning the magnitude and net effects. However, through measurements of the microphysical properties of cirrus clouds, we can better characterize them, which can ultimately allow for their radiative properties to be more accurately ascertained. It has recently been proposed that there are two types of cirrus clouds – in situ and liquid origin. In this study, we present observational evidence to show that two distinct types of cirrus do exist. Airborne, in situ measurements of cloud ice water content (IWC), ice crystal concentration (Nice), and ice crystal size from the 2014 ML-CIRRUS campaign provide cloud samples that have been divided according to their origin type. The key features that set liquid origin cirrus apart from the in situ origin cirrus are a higher frequency of high IWC (> 100 ppmv), higher Nice values, and larger ice crystals. A vertical distribution of Nice shows that the in situ origin cirrus clouds exhibit a median value of around 0.1 cm−3, while the liquid origin concentrations are slightly, but notably higher. The median sizes of the crystals contributing the most mass are less than 200 μm for in situ origin cirrus, with some of the largest crystals reaching 550 μm in size. The liquid origin cirrus, on the other hand, were observed to have median diameters greater than 200 μm, and crystals that were up to 750 μm. An examination of these characteristics in relation to each other and their relationship to temperature provides strong evidence that these differences arise from the dynamics and conditions in which the ice crystals formed. Additionally, the existence of these two groups in cirrus cloud populations may explain why a bimodal distribution in the IWC-temperature relationship has been observed. We hypothesize that the low IWC mode is the result of in situ origin cirrus and the high IWC mode is the result of liquid origin cirrus.


2016 ◽  
Vol 16 (9) ◽  
pp. 5793-5809 ◽  
Author(s):  
Anna E. Luebke ◽  
Armin Afchine ◽  
Anja Costa ◽  
Jens-Uwe Grooß ◽  
Jessica Meyer ◽  
...  

Abstract. The radiative role of ice clouds in the atmosphere is known to be important, but uncertainties remain concerning the magnitude and net effects. However, through measurements of the microphysical properties of cirrus clouds, we can better characterize them, which can ultimately allow for their radiative properties to be more accurately ascertained. Recently, two types of cirrus clouds differing by formation mechanism and microphysical properties have been classified – in situ and liquid origin cirrus. In this study, we present observational evidence to show that two distinct types of cirrus do exist. Airborne, in situ measurements of cloud ice water content (IWC), ice crystal concentration (Nice), and ice crystal size from the 2014 ML-CIRRUS campaign provide cloud samples that have been divided according to their origin type. The key features that set liquid origin cirrus apart from the in situ origin cirrus are higher frequencies of high IWC ( > 100 ppmv), higher Nice values, and larger ice crystals. A vertical distribution of Nice shows that the in situ origin cirrus clouds exhibit a median value of around 0.1 cm−3, while the liquid origin concentrations are slightly, but notably higher. The median sizes of the crystals contributing the most mass are less than 200 µm for in situ origin cirrus, with some of the largest crystals reaching 550 µm in size. The liquid origin cirrus, on the other hand, were observed to have median diameters greater than 200 µm, and crystals that were up to 750 µm. An examination of these characteristics in relation to each other and their relationship to temperature provides strong evidence that these differences arise from the dynamics and conditions in which the ice crystals formed. Additionally, the existence of these two groups in cirrus cloud populations may explain why a bimodal distribution in the IWC-temperature relationship has been observed. We hypothesize that the low IWC mode is the result of in situ origin cirrus and the high IWC mode is the result of liquid origin cirrus.


2016 ◽  
Author(s):  
Päivi Haapanala ◽  
Petri Räisänen ◽  
Greg M. McFarquhar ◽  
Jussi Tiira ◽  
Andreas Macke ◽  
...  

Abstract. The impact of ice clouds on solar-disk and circumsolar radiances is investigated using a Monte Carlo radiative transfer model. The monochromatic direct and diffuse radiances are simulated at angles of 0° to 8° from the center of the Sun. Input data for the model are derived from measurements conducted during the 2010 Small Particles in Cirrus campaign together with state-of-the-art databases of optical properties of ice crystals and aerosols. For selected cases, the simulated radiances are compared with ground-based radiance measurements with the Sun and Aureole Measurement (SAM) instrument. First, the sensitivity of the radiances to the ice cloud properties and aerosol optical thickness was addressed. The angular dependence of the disk and circumsolar radiances was found to be most sensitive to assumptions about ice crystal roughness (or, more generally, non-ideal features of ice crystals) and size distribution, with ice crystal habit playing a somewhat smaller role. Second, in the comparisons with SAM data, the ice-cloud optical thickness was adjusted for each case so that the simulated radiances agreed closely (i.e., within 3 %) with the measured disk radiances. Circumsolar radiances at angles larger than ≈ 3° were systematically underestimated when assuming smooth ice crystals, but the agreement with the measurements was better when rough ice crystals were assumed. Our results suggest that it may well be possible to infer the particle roughness (or more generally, non-ideality) directly from ground-based SAM measurements. In addition, the results show the necessity of correcting the ground-based measurements of direct radiation for the presence of diffuse radiation in the instrument's field of view, in particular in the presence of ice clouds.


2017 ◽  
Vol 17 (13) ◽  
pp. 8101-8128 ◽  
Author(s):  
Eyal Freud ◽  
Radovan Krejci ◽  
Peter Tunved ◽  
Richard Leaitch ◽  
Quynh T. Nguyen ◽  
...  

Abstract. The Arctic environment has an amplified response to global climatic change. It is sensitive to human activities that mostly take place elsewhere. For this study, a multi-year set of observed aerosol number size distributions in the diameter range of 10 to 500 nm from five sites around the Arctic Ocean (Alert, Villum Research Station – Station Nord, Zeppelin, Tiksi and Barrow) was assembled and analysed.A cluster analysis of the aerosol number size distributions revealed four distinct distributions. Together with Lagrangian air parcel back-trajectories, they were used to link the observed aerosol number size distributions with a variety of transport regimes. This analysis yields insight into aerosol dynamics, transport and removal processes, on both an intra- and an inter-monthly scale. For instance, the relative occurrence of aerosol number size distributions that indicate new particle formation (NPF) event is near zero during the dark months, increases gradually to  ∼ 40 % from spring to summer, and then collapses in autumn. Also, the likelihood of Arctic haze aerosols is minimal in summer and peaks in April at all sites.The residence time of accumulation-mode particles in the Arctic troposphere is typically long enough to allow tracking them back to their source regions. Air flow that passes at low altitude over central Siberia and western Russia is associated with relatively high concentrations of accumulation-mode particles (Nacc) at all five sites – often above 150 cm−3. There are also indications of air descending into the Arctic boundary layer after transport from lower latitudes.The analysis of the back-trajectories together with the meteorological fields along them indicates that the main driver of the Arctic annual cycle of Nacc, on the larger scale, is when atmospheric transport covers the source regions for these particles in the 10-day period preceding the observations in the Arctic. The scavenging of these particles by precipitation is shown to be important on a regional scale and it is most active in summer. Cloud processing is an additional factor that enhances the Nacc annual cycle.There are some consistent differences between the sites that are beyond the year-to-year variability. They are the result of differences in the proximity to the aerosol source regions and to the Arctic Ocean sea-ice edge, as well as in the exposure to free-tropospheric air and in precipitation patterns – to mention a few. Hence, for most purposes, aerosol observations from a single Arctic site cannot represent the entire Arctic region. Therefore, the results presented here are a powerful observational benchmark for evaluation of detailed climate and air chemistry modelling studies of aerosols throughout the vast Arctic region.


2020 ◽  
Vol 13 (3) ◽  
pp. 1273-1285 ◽  
Author(s):  
Thomas Kuhn ◽  
Sandra Vázquez-Martín

Abstract. Accurate predictions of snowfall require good knowledge of the microphysical properties of the snow ice crystals and particles. Shape is an important parameter as it strongly influences the scattering properties of the ice particles, and thus their response to remote sensing techniques such as radar measurements. The fall speed of ice particles is another important parameter for both numerical forecast models as well as representation of ice clouds and snow in climate models, as it is responsible for the rate of removal of ice from these models. We describe a new ground-based in situ instrument, the Dual Ice Crystal Imager (D-ICI), to determine snow ice crystal properties and fall speed simultaneously. The instrument takes two high-resolution pictures of the same falling ice particle from two different viewing directions. Both cameras use a microscope-like setup resulting in an image pixel resolution of approximately 4 µm pixel−1. One viewing direction is horizontal and is used to determine fall speed by means of a double exposure. For this purpose, two bright flashes of a light-emitting diode behind the camera illuminate the falling ice particle and create this double exposure, and the vertical displacement of the particle provides its fall speed. The other viewing direction is close-to-vertical and is used to provide size and shape information from single-exposure images. This viewing geometry is chosen instead of a horizontal one because shape and size of ice particles as viewed in the vertical direction are more relevant than these properties viewed horizontally, as the vertical fall speed is more strongly influenced by the vertically viewed properties. In addition, a comparison with remote sensing instruments that mostly have a vertical or close-to-vertical viewing geometry is favoured when the particle properties are measured in the same direction. The instrument has been tested in Kiruna, northern Sweden (67.8∘ N, 20.4∘ E). Measurements are demonstrated with images from different snow events, and the determined snow ice crystal properties are presented.


Cirrus ◽  
2002 ◽  
Author(s):  
Andrew J. Heymsfield ◽  
Greg M. McFarquhar

Cirrus, a principal cloud type that forms at low temperatures in the upper troposphere, is composed almost always of ice crystals (Heymsfield and Miloshevich 1989) and on average cover about 20% of the earth's surface (Hartmann et al. 1992). The purpose of this chapter is to characterize the microphysical properties of cirrus clouds. The Glossary of Meteorology (Huschke 1970) defines cirrus clouds as detached clouds in the form of white, delicate filaments, or white or mostly white patches, which are composed of ice crystals. This cloud type forms primarily in the upper troposphere, above about 8km (25,000 feet), where temperatures are generally below -30° C. There are a number of types of cirrus clouds, with the most frequent ones occurring in layers or sheets with horizontal dimensions of hundreds or even thousands of kilometers. Because horizontal dimensions are much greater than vertical extent, this particular type of cirrus cloud is called cirrostratus. Cirrus can also form in a patchy or tufted shape, when the ice crystals are large enough to acquire an appreciable fall velocity (the rate at which ice crystals fall in the vertical) so that trails of considerable vertical extent may form. These trails curve irregularly or slant, sometimes with a commalike shape, as a result of changes in the horizontal wind velocity with height and variations in the fall velocity of the ice crystals. A wispy, layered cloud that forms at the top of a cumulonimbus cloud, termed an “anvil” because of its shape, is a cirrus that consists essentially of ice debris which spreads outward from the convective parts of the storm. Anvils do not include the white, dense portions of thunderstorms or the active convective column. Anvils can spread to form large, widespread cloud layers. Tropical cirrus clouds are thought to arise primarily from cumulonimbus clouds. Unlike the thin, wispy cirrus typifying mid-latitudes, the high altitudes and extensive lateral and vertical development that often characterize tropical cirrus impose substantial large-scale radiative effects in the atmosphere and at the earth's surface (Hartmann et al. 1992; Collins et al. 1996). The cirrus-like low-level ice clouds and ice fogs of the Arctic are not considered cirrus.


Sign in / Sign up

Export Citation Format

Share Document