Tropical Cyclone Resistance to Strong Environmental Shear

2021 ◽  
Vol 78 (4) ◽  
pp. 1275-1293
Author(s):  
Yi Dai ◽  
Sharanya J. Majumdar ◽  
David S. Nolan
Keyword(s):  
Wind Shear ◽  
Vertical Wind Shear ◽  
Environmental Flow ◽  
Statistical Investigation ◽  
Vertical Wind ◽  
Intensity Change ◽  
Time Varying ◽  
Strong Shear ◽  
Induced Flow ◽  
Total Shear

AbstractIt is widely known that strong vertical wind shear (exceeding 10 m s−1) often weakens tropical cyclones (TCs). However, in some circumstances, a TC is able to resist this strong shear and even restrengthen. To better understand this phenomenon, a series of idealized simulations are conducted, followed by a statistical investigation of 40 years of Northern Hemisphere TCs. In the idealized simulations, a TC is embedded within a time-varying point-downscaling framework, which is used to gradually increase the environmental vertical wind shear to 14 m s−1 and then hold it constant. This controlled framework also allows for the separation of the TC-induced flow from the prescribed environmental flow. The TC-induced outflow is found to withstand the strong upper-tropospheric environmental flow, and this is manifested in the TC-induced shear difference (TCSD) vector. The TCSD vector, together with the environmental shear vector, defines an azimuthal range within which most of the asymmetric convection is located. The statistical analysis confirms the findings from the idealized simulations, and the results are not strongly sensitive to the TC intensity or basin. Moreover, compared with total shear, the inclusion of TCSD information creates a slightly better correlation with TC intensity change. Overall, the TCSD vector serves as a diagnostic to explain the ability of a TC to resist strong environmental shear through its outflow, and it could potentially be used as a parameter to predict future intensity change.

scholarly journals The Unexpected Rapid Intensification of Tropical Cyclones in Moderate Vertical Wind Shear. Part III: Outflow–Environment Interaction

2019 ◽  
Vol 147 (8) ◽  
pp. 2919-2940 ◽  
Author(s):  
David R. Ryglicki ◽  
James D. Doyle ◽  
Daniel Hodyss ◽  
Joshua H. Cossuth ◽  
Yi Jin ◽  
...  
Keyword(s):  
Wind Shear ◽  
Vertical Wind Shear ◽  
Environmental Flow ◽  
Vertical Wind ◽  
Environment Interaction ◽  
Rapid Intensification ◽  
Field Matching ◽  
Upper Level ◽  
Bernoulli Flow ◽  
Dynamic High Pressure

Abstract Interactions between the upper-level outflow of a sheared, rapidly intensifying tropical cyclone (TC) and the background environmental flow in an idealized model are presented. The most important finding is that the divergent outflow from convection localized by the tilt of the vortex serves to divert the background environmental flow around the TC, thus reducing the local vertical wind shear. We show that this effect can be understood from basic theoretical arguments related to Bernoulli flow around an obstacle. In the simulation discussed, the environmental flow diversion by the outflow is limited to 2 km below the tropopause in the 12–14-km (250–150 hPa) layer. Synthetic water vapor satellite imagery confirms the presence of upshear arcs in the cloud field, matching satellite observations. These arcs, which exist in the same layer as the outflow, are caused by slow-moving wave features and serve as visual markers of the outflow–environment interface. The blocking effect where the outflow and the environmental winds meet creates a dynamic high pressure whose pressure gradient extends nearly 1000 km upwind, thus causing the environmental winds to slow down, to converge, and to sink. We discuss these results with respect to the first part of this three-part study, and apply them to another atypical rapid intensification hurricane: Matthew (2016).

scholarly journals The Influence of Uniform Flow on Tropical Cyclone Intensity Change

2005 ◽  
Vol 62 (9) ◽  
pp. 3193-3212 ◽  
Author(s):  
Joey H. Y. Kwok ◽  
Johnny C. L. Chan
Keyword(s):  
Tropical Cyclone ◽  
Wind Shear ◽  
Mesoscale Model ◽  
Vertical Wind Shear ◽  
Lower Troposphere ◽  
Vertical Motion ◽  
Uniform Flow ◽  
Vertical Wind ◽  
Intensity Change ◽  
Westerly Flow

Abstract The influence of a uniform flow on the structural changes of a tropical cyclone (TC) is investigated using the fifth-generation Pennsylvania State University–National Center for Atmospheric Research Mesoscale Model (MM5). Idealized experiments are performed on either an f plane or a β plane. A strong uniform flow on an f plane results in a weaker vortex due to the development of a vertical wind shear induced by the asymmetric vertical motion and a rotation of upper-level anticyclone. The asymmetric vertical motion also reduces the secondary circulation of the vortex. On a β plane with no flow, a broad anticyclonic flow is found to the southeast of the vortex, which expands with time. Similar to the f-plane case, asymmetric vertical motion and vertical wind shear are also found. This beta-induced shear weakens the no-flow case significantly relative to that on an f plane. When a uniform flow is imposed on a β plane, an easterly flow produces a stronger asymmetry whereas a westerly flow reduces it. In addition, an easterly uniform flow tends to strengthen the beta-induced shear whereas a westerly flow appears to reduce it by altering the magnitude and direction of the shear vector. As a result, a westerly flow enhances TC development while an easterly flow reduces it. The vortex tilt and midlevel warming found in this study agree with the previous investigations of vertical wind shear. A strong uniform flow with a constant f results in a tilted and deformed potential vorticity at the upper levels. For a variable f, such tilting is more pronounced for a vortex in an easterly flow, while a westerly flow reduces the tilt. In addition, the vortex tilt appears to be related to the midlevel warming such that the warm core in the lower troposphere cannot extent upward, which leads to the subsequent weakening of the TC.

Effect of TC–Trough Interaction on the Intensity Change of Two Typhoons

2005 ◽  
Vol 20 (2) ◽  
pp. 199-211 ◽  
Author(s):  
Hui Yu ◽  
H. Joe Kwon
Keyword(s):  
Tropical Cyclone ◽  
Wind Shear ◽  
Large Scale ◽  
Vertical Wind Shear ◽  
Vertical Wind ◽  
Intensity Change ◽  
Eddy Flux ◽  
Upper Troposphere ◽  
Shallow Layer ◽  
Upper Level

Abstract Using large-scale analyses, the effect of tropical cyclone–trough interaction on tropical cyclone (TC) intensity change is readdressed by studying the evolution of upper-level eddy flux convergence (EFC) of angular momentum and vertical wind shear for two TCs in the western North Pacific [Typhoons Prapiroon (2000) and Olga (1999)]. Major findings include the following: 1) In spite of decreasing SST, the cyclonic inflow associated with a midlatitude trough should have played an important role in Prapiroon’s intensification to its maximum intensity and the maintenance after recurvature through an increase in EFC. The accompanied large vertical wind shear is concentrated in a shallow layer in the upper troposphere. 2) Although Olga also recurved downstream of a midlatitude trough, its development and maintenance were not strongly influenced by the trough. A TC could maintain itself in an environment with or without upper-level eddy momentum forcing. 3) Both TCs started to decay over cold SST in a large EFC and vertical wind shear environment imposed by the trough. 4) Uncertainty of input adds difficulties in quantitative TC intensity forecasting.

A Balanced Tropical Cyclone Test Case for AGCMs with Background Vertical Wind Shear

2015 ◽  
Vol 143 (5) ◽  
pp. 1762-1781 ◽  
Author(s):  
Fei He ◽  
Derek J. Posselt ◽  
Colin M. Zarzycki ◽  
Christiane Jablonowski
Keyword(s):  
Tropical Cyclone ◽  
Wind Shear ◽  
General Circulation ◽  
Vertical Wind Shear ◽  
Circulation Model ◽  
Background Field ◽  
Vertical Wind ◽  
Intensity Change ◽  
Test Case ◽  
The Impact

Abstract This paper presents a balanced tropical cyclone (TC) test case designed to improve current understanding of how atmospheric general circulation model (AGCM) configurations affect simulated TC development and behavior. It consists of an analytic initial condition comprising two independently balanced components. The first provides a vortical TC seed, while the second adds a planetary-scale zonal flow with height-dependent velocity and imposes background vertical wind shear (VWS) on the TC seed. The environmental flow satisfies the steady-state hydrostatic primitive equations in spherical coordinates and is in balance with other background field variables (e.g., temperature, surface geopotential). The evolution of idealized TCs in the test case framework is illustrated in 10-day simulations performed with the Community Atmosphere Model, version 5.1.1 (CAM 5.1.1). Environmental wind profiles with different magnitudes, directions, and vertical inflection points are applied to ensure that the technique is robust to changes in the VWS characteristics. The well-known shear-induced intensity change and structural asymmetry in tropical cyclones are well captured. Sensitivity of TC evolution to small perturbations in the initial vortex is also quantitatively addressed to validate the numerical robustness of the technique. It is concluded that the enhanced TC test case can be used to evaluate the impact of model choice (e.g., resolution, physical parameterizations) on the simulation and representation of TC-like vortices in AGCMs.

Computing Deep-Tropospheric Vertical Wind Shear Analyses for Tropical Cyclone Applications: Does the Methodology Matter?

2014 ◽  
Vol 29 (5) ◽  
pp. 1169-1180 ◽  
Author(s):  
Christopher S. Velden ◽  
John Sears
Keyword(s):  
Tropical Cyclone ◽  
Wind Shear ◽  
Environmental Influence ◽  
Traditional Approach ◽  
Vertical Wind Shear ◽  
Vertical Wind ◽  
Intensity Change ◽  
Wind Fields ◽  
Wind Structure ◽  
Vector Difference

Abstract Vertical wind shear is well known in the tropical cyclone (TC) forecasting community as an important environmental influence on storm structure and intensity change. The traditional way to define deep-tropospheric vertical wind shear in most prior research studies, and in operational forecast applications, is to simply use the vector difference of the 200- and 850-hPa wind fields based on global model analyses. However, is this rather basic approach to approximate vertical wind shear adequate for most TC applications? In this study, the traditional approach is compared to a different methodology for generating fields of vertical wind shear as produced by the University of Wisconsin Cooperative Institute for Meteorological Satellite Studies (CIMSS). The CIMSS fields are derived with heavy analysis weight given to available high-density satellite-derived winds. The resultant isobaric analyses are then used to create two mass-weighted layer-mean wind fields, one upper and one lower tropospheric, which are then differenced to produce the deep-tropospheric vertical wind shear field. The principal novelty of this approach is that it does not rely simply on the analyzed winds at two discrete levels, but instead attempts to account for some of the variable vertical wind structure in the calculation. It will be shown how the resultant vertical wind shear fields derived by the two approaches can diverge significantly in certain situations; the results also suggest that in many cases it is superior in depicting the wind structure's impact on TCs than the simple two-level differential that serves as the common contemporary vertical wind shear approximation.

scholarly journals Satellite-Based Observations of Nonlinear Relationships between Vertical Wind Shear and Intensity Changes during the Life Cycle of Hurricane Joaquin (2015)

2020 ◽  
Vol 35 (3) ◽  
pp. 939-958 ◽  
Author(s):  
Russell L. Elsberry ◽  
Natasha Buholzer ◽  
Christopher S. Velden ◽  
Mary S. Jordan
Keyword(s):  
Life Cycle ◽  
Negative Correlation ◽  
Wind Shear ◽  
Vertical Wind Shear ◽  
Vertical Wind ◽  
Intensity Change ◽  
Intensity Increase ◽  
Positive Correlation ◽  
Peak Intensity ◽  
Intensity Changes

Abstract A CIMSS vertical wind shear (VWS-C) dataset based on reprocessed GOES-East atmospheric motion vectors (AMVs) at 15-min intervals has a −0.36 correlation with the CIMSS Satellite Consensus (SATCON) intensity changes at 30-min intervals over the life cycle of Hurricane Joaquin (2015). Correlations are then calculated for four intensity change events including two rapid intensifications (RIs) and two decays, and four intensity change segments immediately before or after these events. During the first RI, the peak intensity increase of 16 kt (6 h)−1 (1 kt ≈ 0.51 m s−1) follows a small VWS-C decrease to a moderate 8 m s−1 value (negative correlation). A 30-h period of continued RI following the first peak RI occurred under moderate magnitude VWS-C (negative correlation), but with a rotation of the VWS-C direction to become more aligned with the southwestward heading of Joaquin. During the second RI, the peak intensity increase of 15 kt (6 h)−1 leads the rapid VWS-C increase (positive correlation), which the horizontal plots of VWS-C vectors demonstrate is related to an upper-tropospheric cyclone to the northeast of Joaquin. A conceptual model of ocean cooling within the anticyclonic track loop is proposed to explain a counterintuitive decreasing intensity when the VWS-C was also decreasing (positive correlation) during the Joaquin track reversal. These alternating negative and positive correlations during the four events and four segments of intensity change demonstrate the nonlinear relationships between the VWS-C and intensity changes during the life cycle of Joaquin that must be understood, analyzed, and modeled to improve tropical cyclone intensity forecasts, and especially RI events.

scholarly journals Polar Lows – Moist Baroclinic Cyclones Developing in Four Different Vertical Wind Shear Environments

2020 ◽  
Author(s):  
Patrick Johannes Stoll ◽  
Thomas Spengler ◽  
Annick Terpstra ◽  
Rune Grand Graversen
Keyword(s):  
Wind Shear ◽  
Vertical Wind Shear ◽  
Vertical Wind ◽  
Vertical Shear ◽  
Polar Lows ◽  
North East ◽  
The North ◽  
Strong Shear ◽  
Polar Low ◽  
Mesoscale Cyclones

Abstract. Polar lows are intense mesoscale cyclones that develop in polar marine air masses. Motivated by the large variety in their proposed intensification mechanisms, cloud structure, and ambient sub-synoptic environment, we use self-organising maps to classify polar lows. The method is applied to 370 polar lows in the North-East Atlantic, which were obtained by matching mesoscale cyclones from the ERA-5 reanalysis to polar lows registered by the Norwegian Meteorological Institute in the STARS dataset. ERA-5 reproduces 93 % of the STARS polar lows. We identify five different polar-low configurations, which are characterised by the vertical wind shear vector relative to the propagation direction. Four categories feature a strong shear with different orientations of the shear vector, whereas the fifth category contains conditions with weak shear. The orientation of the vertical-shear vector for the strong shear categories determines the dynamics of the systems, confirming the relevance of the previously identified categorisation into forward and reverse-shear polar lows. In addition, we expand the categorisation with right and left-shear polar lows that propagate towards colder and warmer environments, respectively. Polar lows in the four strong shear categories feature an up-shear tilt in the vertical, typical for the intensification through moist baroclinic processes. As weak-shear conditions mainly occur at the mature or lysis stage of polar lows, we find no evidence for hurricane-like development and propose that spirali-form PLs are most likely associated with a warm seclusion process.

Assessing the Influence of Convective Downdrafts and Surface Enthalpy Fluxes on Tropical Cyclone Intensity Change in Moderate Vertical Wind Shear

2019 ◽  
Vol 147 (10) ◽  
pp. 3519-3534 ◽  
Author(s):  
Leon T. Nguyen ◽  
Robert Rogers ◽  
Jonathan Zawislak ◽  
Jun A. Zhang
Keyword(s):  
Boundary Layer ◽  
Wind Shear ◽  
Deep Convection ◽  
Vertical Wind Shear ◽  
Lower Troposphere ◽  
Observation Time ◽  
Vertical Wind ◽  
Intensity Change ◽  
Conditional Instability ◽  
Surface Enthalpy

Abstract The thermodynamic impacts of downdraft-induced cooling/drying and downstream recovery via surface enthalpy fluxes within tropical cyclones (TCs) were investigated using dropsonde observations collected from 1996 to 2017. This study focused on relatively weak TCs (tropical depression, tropical storm, category 1 hurricane) that were subjected to moderate (4.5–11.0 m s−1) levels of environmental vertical wind shear. The dropsonde data were analyzed in a shear-relative framework and binned according to TC intensity change in the 24 h following the dropsonde observation time, allowing for comparison between storms that underwent different intensity changes. Moisture and temperature asymmetries in the lower troposphere yielded a relative maximum in lower-tropospheric conditional instability in the downshear quadrants and a relative minimum in instability in the upshear quadrants, regardless of intensity change. However, the instability increased as the intensification rate increased, particularly in the downshear quadrants. This was due to increased boundary layer moist entropy relative to the temperature profile above the boundary layer. Additionally, significantly larger surface enthalpy fluxes were observed as the intensification rate increased, particularly in the upshear quadrants. These results suggest that in intensifying storms, enhanced surface enthalpy fluxes in the upshear quadrants allow downdraft-modified boundary layer air to recover moisture and heat more effectively as it is advected cyclonically around the storm. By the time the air reaches the downshear quadrants, the lower-tropospheric conditional instability is enhanced, which is speculated to be more favorable for updraft growth and deep convection.

scholarly journals A Statistical Analysis of the Effects of Vertical Wind Shear on Tropical Cyclone Intensity Change over the Western North Pacific

2015 ◽  
Vol 143 (9) ◽  
pp. 3434-3453 ◽  
Author(s):  
Yuqing Wang ◽  
Yunjie Rao ◽  
Zhe-Min Tan ◽  
Daria Schönemann
Keyword(s):  
North Pacific ◽  
Wind Shear ◽  
Western North Pacific ◽  
Deep Layer ◽  
Vertical Wind Shear ◽  
Vertical Wind ◽  
Intensity Change ◽  
Low Level ◽  
Typhoon Season ◽  
Translational Speed

Abstract The effect of vertical wind shear (VWS) between different pressure levels on TC intensity change is statistically analyzed based on the best track data of tropical cyclones (TCs) in the western North Pacific (WNP) from the Joint Typhoon Warning Center (JTWC) and the ECMWF interim reanalysis (ERA-Interim) data during 1981–2013. Results show that the commonly used VWS measure between 200 and 850 hPa is less representative of the attenuating deep-layer shear effect than that between 300 and 1000 hPa. Moreover, the authors find that the low-level shear between 850 (or 700) and 1000 hPa is more negatively correlated with TC intensity change than any deep-layer shear during the active typhoon season, whereas deep-layer shear turns out to be more influential than low-level shear during the remaining less active seasons. Further analysis covering all seasons exhibits that a TC has a better chance to intensify than to decay when the deep-layer shear is lower than 7–9 m s−1 and the low-level shear is below 2.5 m s−1. The probability for TCs to intensify and undergo rapid intensification (RI) increases with decreasing VWS and increasing sea surface temperature (SST). TCs moving at slow translational speeds (less than 3 m s−1) intensify under relatively weaker VWS than TCs moving at intermediate translational speeds (3–8 m s−1). The probability of RI becomes lower than that of rapid decaying (RD) when the translational speed is larger than 8 m s−1. Most TCs tend to decay when the translational speed is larger than 12 m s−1 regardless of the shear condition.

Sign in / Sign up

Export Citation Format

Share Document