scholarly journals Impact of Giant Sea Salt Aerosol Particles on Precipitation in Marine Cumuli and Stratocumuli: Lagrangian Cloud Model Simulations

2021 ◽  
Author(s):  
Piotr Dziekan ◽  
Jørgen B. Jensen ◽  
Wojciech W. Grabowski ◽  
Hanna Pawlowska
Keyword(s):  
Marine Boundary Layer ◽  
Cloud Model ◽  
Cloud Condensation Nuclei ◽  
Field Measurements ◽  
Breaking Waves ◽  
Cloud Microphysics ◽  
Sea Salt ◽  
Boundary Layer Clouds ◽  
Bin Microphysics ◽  
The Impact

AbstractThe impact of giant sea salt aerosols released from breaking waves on rain formation in marine boundary layer clouds is studied using large eddy simulations (LES). We perform simulations of marine cumuli and stratocumuli for various concentrations of cloud condensation nuclei (CCN) and giant CCN (GCCN). Cloud microphysics are modeled with a Lagrangian method that provides key improvements in comparison to previous LES of GCCN that used Eulerian bin microphysics. We find that GCCN significantly increase precipitation in stratocumuli. This effect is strongest for low and moderate CCN concentrations. GCCN are found to have a smaller impact on precipitation formation in cumuli. These conclusions are in agreement with field measurements. We develop a simple parameterization of the effect of GCCN on precipitation, accretion, and autoconversion rates in marine stratocumuli.

scholarly journals Inclusion of biomass burning in WRF-Chem: impact of wildfires on weather forecasts

2011 ◽  
Vol 11 (11) ◽  
pp. 5289-5303 ◽  
Author(s):  
G. Grell ◽  
S. R. Freitas ◽  
M. Stuefer ◽  
J. Fast
Keyword(s):  
Biomass Burning ◽  
Cloud Model ◽  
Cloud Condensation Nuclei ◽  
Cloud Microphysics ◽  
Fire Season ◽  
Strong Impact ◽  
Emission Rates ◽  
Weather Forecasts ◽  
High Concentrations ◽  
The Impact

Abstract. A plume rise algorithm for wildfires was included in WRF-Chem, and applied to look at the impact of intense wildfires during the 2004 Alaska wildfire season on weather simulations using model resolutions of 10 km and 2 km. Biomass burning emissions were estimated using a biomass burning emissions model. In addition, a 1-D, time-dependent cloud model was used online in WRF-Chem to estimate injection heights as well as the vertical distribution of the emission rates. It was shown that with the inclusion of the intense wildfires of the 2004 fire season in the model simulations, the interaction of the aerosols with the atmospheric radiation led to significant modifications of vertical profiles of temperature and moisture in cloud-free areas. On the other hand, when clouds were present, the high concentrations of fine aerosol (PM2.5) and the resulting large numbers of Cloud Condensation Nuclei (CCN) had a strong impact on clouds and cloud microphysics, with decreased precipitation coverage and precipitation amounts during the first 12 h of the integration. During the afternoon, storms were of convective nature and appeared significantly stronger, probably as a result of both the interaction of aerosols with radiation (through an increase in CAPE) as well as the interaction with cloud microphysics.

Giant aerosols increase precipitation in marine cumulus and stratocumulus clouds

2020 ◽  
Author(s):  
Piotr Dziekan ◽  
Jorgen Jensen ◽  
Wojciech Grabowski ◽  
Hanna Pawłowska
Keyword(s):  
Cloud Model ◽  
Sea Salt ◽  
Cloud Seeding ◽  
Cloud Droplets ◽  
Sea Salt Aerosols ◽  
Stratocumulus Clouds ◽  
Bin Microphysics ◽  
The University ◽  
The Impact ◽  
Precipitation Formation

<p>Sea-salt aerosols with radii exceeding 1 μm have been observed over the oceans. Cloud droplets formed on these giant aerosols can quickly grow to drizzle sizes through condensation of water vapor. Therefore giant aerosols, although not numerous, have been speculated to increase the amount of precipitation produced in clouds. Testing this hypothesis in LES simulations has been difficult, because Eulerian microphysics models are not well suited to model growth of droplets on giant aerosols. On the contrary, Lagrangian microphysics models, which are an emerging alternative to the Eulerian bin microphysics models, can model giant aerosols in a straightforward manner.</p><p>LES simulations performed using the University of Warsaw Lagrangian Cloud Model (UWLCM) will be presented. In UWLCM, the Lagrangian super-droplet microphysics model is used. We will assess how giant aerosols affect precipitation formation in marine cumulus (setup based on the RICO campaign) and stratocumulus clouds (setup based on the research flight 2 of the DYCOMS campaign). It will be discussed how the impact of giant aerosols changes with the concentrations of giant and regular aerosols. The results are of importance also for cloud seeding experiments, in which giant sea-salt aerosols can be released into a cloud.</p>

scholarly journals What Polarimetric Weather Radars Offer to Cloud Modelers: Forward Radar Operators and Microphysical/Thermodynamic Retrievals

Atmosphere ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 362 ◽  
Author(s):  
Alexander V. Ryzhkov ◽  
Jeffrey Snyder ◽  
Jacob T. Carlin ◽  
Alexander Khain ◽  
Mark Pinsky
Keyword(s):  
Cloud Model ◽  
Weather Prediction ◽  
Primary Source ◽  
Polarimetric Radar ◽  
Microphysical Process ◽  
Weather Radars ◽  
Cloud Models ◽  
Cloud Modeling ◽  
Bin Microphysics ◽  
The Impact

The utilization of polarimetric weather radars for optimizing cloud models is a next frontier of research. It is widely understood that inadequacies in microphysical parameterization schemes in numerical weather prediction (NWP) models is a primary cause of forecast uncertainties. Due to its ability to distinguish between hydrometeors with different microphysical habits and to identify “polarimetric fingerprints” of various microphysical processes, polarimetric radar emerges as a primary source of needed information. There are two approaches to leverage this information for NWP models: (1) radar microphysical and thermodynamic retrievals and (2) forward radar operators for converting the model outputs into the fields of polarimetric radar variables. In this paper, we will provide an overview of both. Polarimetric measurements can be combined with cloud models of varying complexity, including ones with bulk and spectral bin microphysics, as well as simplified Lagrangian models focused on a particular microphysical process. Combining polarimetric measurements with cloud modeling can reveal the impact of important microphysical agents such as aerosols or supercooled cloud water invisible to the radar on cloud and precipitation formation. Some pertinent results obtained from models with spectral bin microphysics, including the Hebrew University cloud model (HUCM) and 1D models of melting hail and snow coupled with the NSSL forward radar operator, are illustrated in the paper.

scholarly journals Broadening of Cloud Droplet Spectra through Eddy Hopping: Turbulent Entraining Parcel Simulations

2018 ◽  
Vol 75 (10) ◽  
pp. 3365-3379 ◽  
Author(s):  
Gustavo C. Abade ◽  
Wojciech W. Grabowski ◽  
Hanna Pawlowska
Keyword(s):  
Droplet Size ◽  
Turbulent Mixing ◽  
Cloud Condensation Nuclei ◽  
Cloud Droplet ◽  
Cloud Microphysics ◽  
Droplet Growth ◽  
Size Spectrum ◽  
Entrainment Rate ◽  
The Mean ◽  
The Impact

This paper discusses the effects of cloud turbulence, turbulent entrainment, and entrained cloud condensation nuclei (CCN) activation on the evolution of the cloud droplet size spectrum. We simulate an ensemble of idealized turbulent cloud parcels that are subject to entrainment events modeled as a random process. Entrainment events, subsequent turbulent mixing inside the parcel, supersaturation fluctuations, and the resulting stochastic droplet activation and growth by condensation are simulated using a Monte Carlo scheme. Quantities characterizing the turbulence intensity, entrainment rate, CCN concentration, and the mean fraction of environmental air entrained in an event are all specified as independent external parameters. Cloud microphysics is described by applying Lagrangian particles, the so-called superdroplets. These are either unactivated CCN or cloud droplets that grow from activated CCN. The model accounts for the addition of environmental CCN into the cloud by entraining eddies at the cloud edge. Turbulent mixing of the entrained dry air with cloudy air is described using the classical linear relaxation to the mean model. We show that turbulence plays an important role in aiding entrained CCN to activate, and thus broadening the droplet size distribution. These findings are consistent with previous large-eddy simulations (LESs) that consider the impact of variable droplet growth histories on the droplet size spectra in small cumuli. The scheme developed in this work is ready to be used as a stochastic subgrid-scale scheme in LESs of natural clouds.

scholarly journals Modelling the contribution of sea salt and dimethyl sulfide derived aerosol to marine CCN

2002 ◽  
Vol 2 (1) ◽  
pp. 17-30 ◽  
Author(s):  
Y. J. Yoon ◽  
P. Brimblecombe
Keyword(s):  
Sulfuric Acid ◽  
Dimethyl Sulfide ◽  
Marine Boundary Layer ◽  
Cloud Condensation Nuclei ◽  
Accommodation Coefficient ◽  
Sea Salt ◽  
Wind Speeds ◽  
Transfer Processes ◽  
Clean Air ◽  
The Relationship

Abstract. The concentration of cloud condensation nuclei (CCN) in the marine boundary layer (MBL) was estimated from dimethyl sulfide (DMS) flux, sea salt (SS) emission, and aerosols entrained from the free troposphere (FT). Only under clean air conditions, did the nucleation of DMS derived sulfur (DMS CCN) contribute significantly to the MBL CCN. The accommodation coefficient for sulfuric acid mass transfer was found to be a very important parameter in the modeling the contribution of DMS to MBL CCN. The relationship between seawater DMS and MBL CCN was found to be non-linear mainly due to the transfer processes of sulfuric acid onto aerosols. In addition, sea salt derived CCN (SS CCN) and entrained aerosol from the FT (FT CCN) affected the MBL CCN directly, by supplying CCN, and indirectly, by behaving as an efficient sink for sulfuric acid. The SS CCN explained more than 50% of the total predicted MBL CCN when wind speeds were moderate and high. Sea salt and FT aerosol may often be more efficient sources of MBL CCN than DMS.

scholarly journals Cloud Processing of Aerosol Particles in Marine Stratocumulus Clouds

Atmosphere ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 520 ◽  
Author(s):  
Andrea I. Flossmann ◽  
Wolfram Wobrock
Keyword(s):  
Boundary Layer ◽  
Marine Boundary Layer ◽  
Numerical Study ◽  
Spatial Scales ◽  
Aerosol Particles ◽  
Cloud Microphysics ◽  
Marine Stratocumulus ◽  
Boundary Layer Clouds ◽  
Cloud Processing ◽  
Stratocumulus Clouds

Cloud processing of aerosol particles is an important process and is, for example, thought to be responsible for the so-called “Hoppel-minimum” in the marine aerosol particle distribution or contribute to the cell organization of marine boundary layer clouds. A numerical study of the temporal and spatial scales of the processing of aerosol particles by typical marine stratocumulus clouds is presented. The dynamical framework is inspired by observations during the VOCALS (Variability of the American Monsoon System Ocean-Cloud-Atmosphere-Land Study) Regional Experiment in the Southeast Pacific. The 3-D mesoscale model version of DESCAM (Detailed Scavenging Model) follows cloud microphysics of the stratocumulus deck in a bin-resolved manner and has been extended to keep track of cloud-processed particles in addition to non-processed aerosol particles in the air and inside the cloud drops. The simulation follows the evolution of the processing of aerosol particles by the cloud. It is found that within one hour almost all boundary layer aerosol particles have passed through at least one cloud cycle. However, as the in-cloud residence times of the particles in the considered case are only on the order of minutes, the aerosol particles remain essentially unchanged. Our findings suggest that in order to produce noticeable microphysical and dynamical effects in the marine boundary layer clouds, cloud processing needs to continue for extended periods of time, exceeding largely the time period considered in the present study. A second model study is dedicated to the interaction of ship track particles with marine boundary layer clouds. The model simulates quite satisfactorily the incorporation of the ship plume particles into the cloud. The observed time and spatial scales and a possible Twomey effect were reproduced.

scholarly journals Performance of McRAS-AC in the GEOS-5 AGCM: aerosol-cloud-microphysics, precipitation, cloud radiative effects, and circulation

2012 ◽  
Vol 5 (2) ◽  
pp. 1381-1434 ◽  
Author(s):  
Y. C. Sud ◽  
D. Lee ◽  
L. Oreopoulos ◽  
D. Barahona ◽  
A. Nenes ◽  
...  
Keyword(s):  
Climate Modeling ◽  
Cloud Model ◽  
Cloud Microphysics ◽  
Sensitivity Analyses ◽  
Radiative Effects ◽  
Boundary Layer Clouds ◽  
Aerosol Cloud ◽  
Marine Stratus ◽  
Systematic Biases ◽  
Cloud Radiative Effects

Abstract. A revised version of the Microphysics of clouds with Relaxed Arakawa-Schubert and Aerosol-Cloud interaction scheme (McRAS-AC) including, among others, the Barahona and Nenes ice nucleation parameterization, is implemented in the GEOS-5 AGCM. Various fields from a 10-yr long integration of the AGCM with McRAS-AC were compared with their counterparts from an integration of the baseline GEOS-5 AGCM using satellite data as observations. Generally McRAS-AC simulations have smaller biases in cloud fields and cloud radiative effects over most of the regions of the Earth than the baseline GEOS-5 AGCM. Two systematic biases are identified in the McRAS-AC runs: one under-prediction of cloud particles around 40° S–60° S, and one over-prediction of cloud water path during Northern Hemisphere summer over the Gulf Stream and North Pacific. Sensitivity analyses show that these biases potentially originate from biases in the aerosol input. The first bias is largely eliminated in a sensitivity test using 50% smaller sea-salt aerosol particles, while the second bias is much reduced when interactive aerosol chemistry was turned on. The main drawback of McRAS-AC is dearth of low-level marine stratus clouds, probably due to lack of boundary-layer clouds that is an outcome of explicit dry-convection not yet implemented into the cloud model. Nevertheless, McRAS-AC simulates realistic clouds and their optical properties that can further improve with better aerosol-input. Thereby, McRAS-AC has the potential to be a valuable tool for climate modeling research because of its superior simulation capabilities that physically couple aerosols, cloud microphysics, cloud macrophysics, and cloud-radiation interaction for all clouds.

scholarly journals Aerosol–Cloud Interaction in Deep Convective Clouds over the Indian Peninsula Using Spectral (Bin) Microphysics

2017 ◽  
Vol 74 (10) ◽  
pp. 3145-3166 ◽  
Author(s):  
K. Gayatri ◽  
S. Patade ◽  
T. V. Prabha
Keyword(s):  
Size Distribution ◽  
Cloud Condensation Nuclei ◽  
Wrf Model ◽  
Cloud Droplet ◽  
Liquid Water Content ◽  
Cloud Microphysics ◽  
Large Area ◽  
Surface Precipitation ◽  
Aerosol Cloud ◽  
Bin Microphysics

Abstract The Weather Research and Forecasting (WRF) Model coupled with a spectral bin microphysics (SBM) scheme is used to investigate aerosol effects on cloud microphysics and precipitation over the Indian peninsular region. The main emphasis of the study is in comparing simulated cloud microphysical structure with in situ aircraft observations from the Cloud Aerosol Interaction and Precipitation Enhancement Experiment (CAIPEEX). Aerosol–cloud interaction over the rain-shadow region is investigated with observed and simulated size distribution spectra of cloud droplets and ice particles in monsoon clouds. It is shown that size distributions as well as other microphysical characteristics obtained from simulations such as liquid water content, cloud droplet effective radius, cloud droplet number concentration, and thermodynamic parameters are in good agreement with the observations. It is seen that in clouds with high cloud condensation nuclei (CCN) concentrations, snow and graupel size distribution spectra were broader compared to clouds with low concentrations of CCN, mainly because of enhanced riming in the presence of a large number of droplets with a diameter of 10–30 μm. The Hallett–Mossop ice multiplication process is illustrated to have an impact on snow and graupel mass. The changes in CCN concentrations have a strong effect on cloud properties over the domain, amounts of cloud water, and the glaciation of the clouds, but the effects on surface precipitation are small when averaged over a large area. Overall enhancement of cold-phase cloud processes in the high-CCN case contributed to slight enhancement (5%) in domain-averaged surface precipitation.

scholarly journals Macroscopic impacts of cloud and precipitation processes on maritime shallow convection as simulated by a large eddy simulation model with bin microphysics

2015 ◽  
Vol 15 (2) ◽  
pp. 913-926 ◽  
Author(s):  
W. W. Grabowski ◽  
L.-P. Wang ◽  
T. V. Prabha
Keyword(s):  
Remote Sensing ◽  
Cloud Condensation Nuclei ◽  
Collision Kernel ◽  
Small Scale ◽  
Shallow Convection ◽  
Large Eddy Simulation Model ◽  
Large Eddy ◽  
Precipitation Processes ◽  
Bin Microphysics ◽  
The Impact

Abstract. This paper discusses impacts of cloud and precipitation processes on macrophysical properties of shallow convective clouds as simulated by a large eddy model applying warm-rain bin microphysics. Simulations with and without collision–coalescence are considered with cloud condensation nuclei (CCN) concentrations of 30, 60, 120, and 240 mg−1. Simulations with collision–coalescence include either the standard gravitational collision kernel or a novel kernel that includes enhancements due to the small-scale cloud turbulence. Simulations with droplet collisions were discussed in Wyszogrodzki et al. (2013) focusing on the impact of the turbulent collision kernel. The current paper expands that analysis and puts model results in the context of previous studies. Despite a significant increase of the drizzle/rain with the decrease of CCN concentration, enhanced by the effects of the small-scale turbulence, impacts on the macroscopic cloud field characteristics are relatively minor. Model results show a systematic shift in the cloud-top height distributions, with an increasing contribution of deeper clouds for stronger precipitating cases. We show that this is consistent with the explanation suggested in Wyszogrodzki et al. (2013); namely, the increase of drizzle/rain leads to a more efficient condensate offloading in the upper parts of the cloud field. A second effect involves suppression of the cloud droplet evaporation near cloud edges in low-CCN simulations, as documented in previous studies (e.g., Xue and Feingold, 2006). We pose the question whether the effects of cloud turbulence on drizzle/rain formation in shallow cumuli can be corroborated by remote sensing observations, for instance, from space. Although a clear signal is extracted from model results, we argue that the answer is negative due to uncertainties caused by the temporal variability of the shallow convective cloud field, sampling and spatial resolution of the satellite data, and overall accuracy of remote sensing retrievals.

scholarly journals A global off-line model of size-resolved aerosol microphysics: II. Identification of key uncertainties

2005 ◽  
Vol 5 (12) ◽  
pp. 3233-3250 ◽  
Author(s):  
D. V. Spracklen ◽  
K. J. Pringle ◽  
K. S. Carslaw ◽  
M. P. Chipperfield ◽  
G. W. Mann
Keyword(s):  
Nucleation Rate ◽  
Marine Boundary Layer ◽  
Cloud Condensation Nuclei ◽  
Accommodation Coefficient ◽  
Sulfate Aerosol ◽  
Sea Salt ◽  
Condensation Nuclei ◽  
Microphysical Processes ◽  
Global Mean ◽  
Aerosol Properties

Abstract. We use the new GLOMAP model of global aerosol microphysics to investigate the sensitivity of modelled sulfate and sea salt aerosol properties to uncertainties in the driving microphysical processes and compare these uncertainties with those associated with aerosol and precursor gas emissions. Overall, we conclude that uncertainties in microphysical processes have a larger effect on global sulfate and sea salt derived condensation nuclei (CN) and cloud condensation nuclei (CCN) concentrations than uncertainties in present-day sulfur emissions. Our simulations suggest that uncertainties in predicted sulfate and sea salt CCN abundances due to poorly constrained microphysical processes are likely to be of a similar magnitude to long-term changes in sulfate and sea salt CCN due to changes in anthropogenic emissions. A microphysical treatment of the global sulfate aerosol allows the uncertainty in climate-relevant aerosol properties to be attributed to specific processes in a way that has not been possible with simpler aerosol schemes. In particular we conclude that: (1) changes in the binary H2SO4-H2O nucleation rate and condensation rate of gaseous H2SO4 cause a shift in the vertical location of the upper tropospheric CN layer by as much as 3 km, while the shape of the CN profile is essentially pre-served (2) uncertainties in the binary H2SO4-H2O nucleation rate have a relatively insignificant effect on marine boundary layer (MBL) aerosol properties; (3) emitting a fraction of anthropogenic SO2 as particulates (to represent production of sulfate particles in power plant plumes below the scale of the model grid (which is of the order of 300 km)) has the potential to change the global mean MBL sulfate-derived CN concentrations by up to 72%, and changes of up to a factor 20 can occur in polluted continental regions; (4) predicted global mean MBL sulfate and sea salt CCN concentrations change by 10 to 60% when several microphysical processes are changed within reasonable uncertainty ranges; (5) sulfate and sea salt derived CCN concentrations are particularly sensitive to primary particle emissions, with global mean MBL sulfate and sea salt CCN changing by up to 27% and local concentrations over continental regions changing by more than 100% when the percentage of anthropogenic SO2 emitted as particulates is changed from 0 to 5%; (6) large changes in sea spray flux have insignificant effects on global sulfate aerosol except when the mass accommodation coefficient of sulfuric acid on the salt particles is set unrealistically low.

Sign in / Sign up

Export Citation Format

Share Document