scholarly journals An Investigation of the Connections among Convection, Clouds, and Climate Sensitivity in a Global Climate Model

2014 ◽  
Vol 27 (5) ◽  
pp. 1845-1862 ◽  
Author(s):  
Ming Zhao
Keyword(s):  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Convective Precipitation ◽  
Entrainment Rate ◽  
Cloud Radiative Forcing ◽  
Precipitation Efficiency ◽  
Perturbed Physics

Abstract This study explores connections between process-level modeling of convection and global climate model (GCM) simulated clouds and cloud feedback to global warming through a set of perturbed-physics and perturbed sea surface temperature experiments. A bulk diagnostic approach is constructed, and a set of variables is derived and demonstrated to be useful in understanding the simulated relationship. In particular, a novel bulk quantity, the convective precipitation efficiency or equivalently the convective detrainment efficiency, is proposed as a simple measure of the aggregated properties of parameterized convection important to the GCM simulated clouds. As the convective precipitation efficiency increases in the perturbed-physics experiments, both liquid and ice water path decrease, with low and middle cloud fractions diminishing at a faster rate than high cloud fractions. This asymmetry results in a large sensitivity of top-of-atmosphere net cloud radiative forcing to changes in convective precipitation efficiency in this limited set of models. For global warming experiments, intermodel variations in the response of cloud condensate, low cloud fraction, and total cloud radiative forcing are well explained by model variations in response to total precipitation (or detrainment) efficiency. Despite significant variability, all of the perturbed-physics models produce a sizable increase in precipitation efficiency to warming. A substantial fraction of the increase is due to its convective component, which depends on the parameterization of cumulus mixing and convective microphysical processes. The increase in convective precipitation efficiency and associated change in convective cloud height distribution owing to warming explains the increased cloud feedback and climate sensitivity in recently developed Geophysical Fluid Dynamics Laboratory GCMs. The results imply that a cumulus scheme using fractional removal of condensate for precipitation and inverse calculation of the entrainment rate tends to produce a lower climate sensitivity than a scheme using threshold removal for precipitation and the entrainment rate formulated inversely dependent on convective depth.

scholarly journals Comparison of ice particle characteristics simulated by the Community Atmosphere Model (CAM5) with in-situ observations

2014 ◽  
Vol 14 (6) ◽  
pp. 7637-7681 ◽  
Author(s):  
T. Eidhammer ◽  
H. Morrison ◽  
A. Bansemer ◽  
A. Gettelman ◽  
A. J. Heymsfield
Keyword(s):  
Size Distribution ◽  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Atmospheric Model ◽  
Slope Parameter ◽  
Cloud Radiative Forcing ◽  
Threshold Size ◽  
Cloud Ice

Abstract. Detailed measurements of ice crystals in cirrus clouds were used to compare with results from the Community Atmospheric Model Version 5 (CAM5) global climate model. The observations are from two different field campaigns with contrasting conditions: Atmospheric Radiation Measurements Spring Cloud Intensive Operational Period in 2000 (ARM-IOP), which was characterized primarily by midlatitude frontal clouds and cirrus, and Tropical Composition, Cloud and Climate Coupling (TC4), which was dominated by anvil cirrus. Results show that the model typically overestimates the slope parameter of the exponential size distributions of cloud ice and snow, while the variation with temperature (height) is comparable. The model also overestimates the ice/snow number concentration (0th moment of the size distribution) and underestimates higher moments (2nd through 5th), but compares well with observations for the 1st moment. Overall the model shows better agreement with observations for TC4 than for ARM-IOP in regards to the moments. The mass-weighted terminal fallspeed is lower in the model compared to observations for both ARM-IOP and TC4, which is partly due to the overestimation of the size distribution slope parameter. Sensitivity tests with modification of the threshold size for cloud ice to snow autoconversion (Dcs) do not show noticeable improvement in modeled moments, slope parameter and mass weighed fallspeed compared to observations. Further, there is considerable sensitivity of the cloud radiative forcing to Dcs, consistent with previous studies, but no value of Dcs improves modeled cloud radiative forcing compared to measurements. Since the autoconversion of cloud ice to snow using the threshold size Dcs has little physical basis, future improvement to combine cloud ice and snow into a single category, eliminating the need for autoconversion, is suggested.

scholarly journals Role of the Convection Scheme in Modeling Initiation and Intensification of Tropical Depressions over the North Atlantic

2017 ◽  
Vol 145 (4) ◽  
pp. 1495-1509 ◽  
Author(s):  
J.-P. Duvel ◽  
S. J. Camargo ◽  
A. H. Sobel
Keyword(s):  
Relative Humidity ◽  
Climate Model ◽  
Early Stage ◽  
Global Climate ◽  
Global Climate Model ◽  
Convective Available Potential Energy ◽  
Convective Precipitation ◽  
Cloud Base ◽  
Entrainment Rate ◽  
Convection Scheme

Abstract The authors analyze how modifications of the convective scheme modify the initiation of tropical depression vortices (TDVs) and their intensification into stronger warm-cored tropical cyclone–like vortices (TCs) in global climate model (GCM) simulations. The model’s original convection scheme has entrainment and cloud-base mass flux closures based on moisture convergence. Two modifications are considered: one in which entrainment is dependent on relative humidity and another in which the closure is based on the convective available potential energy (CAPE). Compared to reanalysis, TDVs are more numerous and intense in all three simulations, probably as a result of excessive parameterized deep convection at the expense of convection detraining at midlevel. The relative humidity–dependent entrainment rate increases both TDV initiation and intensification relative to the control. This is because this entrainment rate is reduced in the moist center of the TDVs, giving more intense convective precipitation, and also because it generates a moister environment that may favor the development of early stage TDVs. The CAPE closure inhibits the parameterized convection in strong TDVs, thus limiting their development despite a slight increase in the resolved convection. However, the maximum intensity reached by TC-like TDVs is similar in the three simulations, showing the statistical character of these tendencies. The simulated TCs develop from TDVs with different dynamical origins than those observed. For instance, too many TDVs and TCs initiate near or over southern West Africa in the GCM, collocated with the maximum in easterly wave activity, whose characteristics are also dependent on the convection scheme considered.

scholarly journals Uncertainty in Model Climate Sensitivity Traced to Representations of Cumulus Precipitation Microphysics

2016 ◽  
Vol 29 (2) ◽  
pp. 543-560 ◽  
Author(s):  
Ming Zhao ◽  
J.-C. Golaz ◽  
I. M. Held ◽  
V. Ramaswamy ◽  
S.-J. Lin ◽  
...  
Keyword(s):  
Climate Sensitivity ◽  
Large Scale ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Convective Precipitation ◽  
Climate Projections ◽  
Geophysical Fluid Dynamics Laboratory ◽  
Convection Parameterization ◽  
Comparable Quality

Abstract Uncertainty in equilibrium climate sensitivity impedes accurate climate projections. While the intermodel spread is known to arise primarily from differences in cloud feedback, the exact processes responsible for the spread remain unclear. To help identify some key sources of uncertainty, the authors use a developmental version of the next-generation Geophysical Fluid Dynamics Laboratory global climate model (GCM) to construct a tightly controlled set of GCMs where only the formulation of convective precipitation is changed. The different models provide simulation of present-day climatology of comparable quality compared to the model ensemble from phase 5 of CMIP (CMIP5). The authors demonstrate that model estimates of climate sensitivity can be strongly affected by the manner through which cumulus cloud condensate is converted into precipitation in a model’s convection parameterization, processes that are only crudely accounted for in GCMs. In particular, two commonly used methods for converting cumulus condensate into precipitation can lead to drastically different climate sensitivity, as estimated here with an atmosphere–land model by increasing sea surface temperatures uniformly and examining the response in the top-of-atmosphere energy balance. The effect can be quantified through a bulk convective detrainment efficiency, which measures the ability of cumulus convection to generate condensate per unit precipitation. The model differences, dominated by shortwave feedbacks, come from broad regimes ranging from large-scale ascent to subsidence regions. Given current uncertainties in representing convective precipitation microphysics and the current inability to find a clear observational constraint that favors one version of the authors’ model over the others, the implications of this ability to engineer climate sensitivity need to be considered when estimating the uncertainty in climate projections.

The Sensitivity of the Tropical-Mean Radiation Budget

2005 ◽  
Vol 18 (16) ◽  
pp. 3189-3203 ◽  
Author(s):  
Amy C. Clement ◽  
Brian Soden
Keyword(s):  
Climate Model ◽  
Decadal Variability ◽  
Global Climate ◽  
Global Climate Model ◽  
Hadley Circulation ◽  
Radiation Budget ◽  
Convective Precipitation ◽  
Model Sensitivity ◽  
Precipitation Efficiency ◽  
Sensitivity Experiments

Abstract A key disagreement exists between global climate model (GCM) simulations and satellite observations of the decadal variability in the tropical-mean radiation budget. Measurements from the Earth Radiation Budget Experiment (ERBE) over the period 1984–2001 indicate a trend of increasing longwave emission and decreasing shortwave reflection that no GCM can currently reproduce. Motivated by these results, a series of model sensitivity experiments is performed to investigate hypotheses that have been advanced to explain this discrepancy. Specifically, the extent to which a strengthening of the Hadley circulation or a change in convective precipitation efficiency can alter the tropical-mean radiation budget is assessed. Results from both model sensitivity experiments and an empirical analysis of ERBE observations suggest that the tropical-mean radiation budget is remarkably insensitive to changes in the tropical circulation. The empirical estimate suggests that it would require at least a doubling in strength of the Hadley circulation in order to generate the observed decadal radiative flux changes. In contrast, rather small changes in a model’s convective precipitation efficiency can generate changes comparable to those observed, provided that the precipitation efficiency lies near the upper end of its possible range. If, however, the precipitation efficiency of tropical convective systems is more moderate, the model experiments suggest that the climate would be rather insensitive to changes in its value. Further observations are necessary to constrain the potential effects of microphysics on the top-of-atmosphere radiation budget.

scholarly journals Comparison of ice cloud properties simulated by the Community Atmosphere Model (CAM5) with in-situ observations

2014 ◽  
Vol 14 (18) ◽  
pp. 10103-10118 ◽  
Author(s):  
T. Eidhammer ◽  
H. Morrison ◽  
A. Bansemer ◽  
A. Gettelman ◽  
A. J. Heymsfield
Keyword(s):  
Size Distribution ◽  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Slope Parameter ◽  
Cloud Radiative Forcing ◽  
Threshold Size ◽  
Fall Speed ◽  
Cloud Ice

Abstract. Detailed measurements of ice crystals in cirrus clouds were used to compare with results from the Community Atmospheric Model Version 5 (CAM5) global climate model. The observations are from two different field campaigns with contrasting conditions: Atmospheric Radiation Measurements Spring Cloud Intensive Operational Period in 2000 (ARM-IOP), which was characterized primarily by midlatitude frontal clouds and cirrus, and Tropical Composition, Cloud and Climate Coupling (TC4), which was dominated by anvil cirrus. Results show that the model typically overestimates the slope parameter of the exponential size distributions of cloud ice and snow, while the variation with temperature (height) is comparable. The model also overestimates the ice/snow number concentration (0th moment of the size distribution) and underestimates higher moments (2nd through 5th), but compares well with observations for the 1st moment. Overall the model shows better agreement with observations for TC4 than for ARM-IOP in regards to the moments. The mass-weighted terminal fall speed is lower in the model compared to observations for both ARM-IOP and TC4, which is partly due to the overestimation of the size distribution slope parameter. Sensitivity tests with modification of the threshold size for cloud ice to snow autoconversion (Dcs) do not show noticeable improvement in modeled moments, slope parameter and mass weighed fall speed compared to observations. Further, there is considerable sensitivity of the cloud radiative forcing to Dcs, consistent with previous studies, but no value of Dcs improves modeled cloud radiative forcing compared to measurements. Since the autoconversion of cloud ice to snow using the threshold size Dcs has little physical basis, future improvement to combine cloud ice and snow into a single category, eliminating the need for autoconversion, is suggested.

How detailed do cloud microphysics need to be in climate models?

2021 ◽  
Author(s):  
Ulrike Proske ◽  
Sylvaine Ferrachat ◽  
David Neubauer ◽  
Ulrike Lohmann
Keyword(s):  
Radiative Forcing ◽  
Climate Models ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Computing Time ◽  
Cloud Microphysics ◽  
Model Response ◽  
Microphysical Processes ◽  
Improved Accuracy

<p>Clouds are of major importance for the climate system, but the radiative forcing resulting from their interaction with aerosols remains uncertain. To improve the representation of clouds in climate models, the parameterisations of cloud microphysical processes (CMPs) have become increasingly detailed. However, more detailed climate models do not necessarily result in improved accuracy for estimates of radiative forcing (Knutti and Sedláček, 2013; Carslaw et al., 2018). On the contrary, simpler formulations are cheaper, sufficient for some applications, and allow for an easier understanding of the respective process' effect in the model.</p><p>This study aims to gain an understanding which CMP parameterisation complexity is sufficient through simplification. We gradually phase out processes such as riming or aggregation from the global climate model ECHAM-HAM, meaning that the processes are only allowed to exhibit a fraction of their effect on the model state. The shape of the model response as a function of the artificially scaled effect of a given process helps to understand the importance of this process for the model response and its potential for simplification. For example, if partially removing a process induces only minor alterations in the present day climate, this process presents as a good candidate for simplification. This may be then further investigated, for example in terms of computing time.<br>The resulting sensitivities to CMP complexity are envisioned to guide CMP model simplifications as well as steer research towards those processes where a more accurate representation proves to be necessary.</p><p> </p><p><br>Carslaw, Kenneth, Lindsay Lee, Leighton Regayre, and Jill Johnson (Feb. 2018). “Climate Models Are Uncertain, but We Can Do Something About It”. In: Eos 99. doi: 10.1029/2018EO093757</p><p>Knutti, Reto and Jan Sedláček (Apr. 2013). “Robustness and Uncertainties in the New CMIP5 Climate Model Projections”. In: Nature Climate Change 3.4, pp. 369–373. doi: 10.1038/nclimate1716</p>

Aerosol Radiative Forcing and Forcing Efficiency in the UVB for Regions Affected by Saharan and Asian Mineral Dust

2009 ◽  
Vol 66 (4) ◽  
pp. 1033-1040 ◽  
Author(s):  
O. E. García ◽  
A. M. Díaz ◽  
F. J. Expósito ◽  
J. P. Díaz ◽  
A. Redondas ◽  
...  
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Radiative Forcing ◽  
Climate Model ◽  
Mineral Dust ◽  
Global Climate ◽  
Global Climate Model ◽  
Aerosol Radiative Forcing ◽  
Benchmark Database ◽  
Aerosol Radiative

Abstract The influence of mineral dust on ultraviolet energy transfer is studied for two different mineralogical origins. The aerosol radiative forcing ΔF and the forcing efficiency at the surface ΔFeff in the range 290–325 nm were estimated in ground-based stations affected by the Saharan and Asian deserts during the dusty seasons. UVB solar measurements were taken from the World Ozone and Ultraviolet Data Center (WOUDC) for four Asian stations (2000–04) and from the Santa Cruz Observatory, Canary Islands (2002–03), under Gobi and Sahara Desert influences, respectively. The Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol optical depth at 550 nm was used to characterize the aerosol load τ, whereas the aerosol index provided by the Total Ozone Mapping Spectrometer (TOMS) sensor was employed to identify the mineral dust events. The ΔF is strongly affected by the aerosol load, the values found being comparable in both regions during the dusty seasons. Under those conditions, ΔF values as large as −1.29 ± 0.53 W m−2 (τ550 = 0.48 ± 0.24) and −1.43 ± 0.38 W m−2 (τ550 = 0.54 ± 0.26) were reached under Saharan and Asian dust conditions, respectively. Nevertheless, significant differences have been observed in the aerosol radiative forcing per unit of aerosol optical depth in the slant path, τS. The maximum ΔFeff values associated with dust influences were −1.55 ± 0.20 W m−2 τS550−1 for the Saharan region and −0.95 ± 0.11 W m−2 τS550−1 in the Asian area. These results may be used as a benchmark database for establishing aerosol corrections in UV satellite products or in global climate model estimations.

scholarly journals Modelling sea salt aerosol and its direct and indirect effects on climate

2007 ◽  
Vol 7 (5) ◽  
pp. 14939-14987 ◽  
Author(s):  
X. Ma ◽  
K. von Salzen ◽  
J. Li
Keyword(s):  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Sea Salt ◽  
Size Distributions ◽  
Size Dependent ◽  
Sea Salt Aerosol ◽  
Direct Forcing ◽  
Log Normal

Abstract. A size-dependent sea salt aerosol parameterization was developed based on the piecewise log-normal approximation (PLA) for aerosol size distributions. Results of this parameterization from simulations with a global climate model produce good agreement with observations at the surface and for vertically-integrated volume size distributions. The global and annual mean of the sea salt burden is 10.1 mg m−2. The direct radiative forcing is calculated to be −1.52 and −0.60 W m−2 for clear sky and all sky, respectively. The first indirect radiative forcing is about twice as large as the direct forcing for all-sky (−1.34 W m−2). The results also show that the total indirect forcing of sea salt is −2.9 W m−2 if climatic feedbacks are taken into account. The sensitivity of the forcings to changes in the burdens and sizes of sea salt particles was also investigated based on additional simulations with a different sea salt source function.

Sign in / Sign up

Export Citation Format

Share Document