scholarly journals Separation of the Effects of Land and Climate Model Errors on Simulated Contemporary Land Carbon Cycle Trends in the MPI Earth System Model version 1*

2014 ◽  
Vol 28 (1) ◽  
pp. 272-291 ◽  
Author(s):  
Daniela Dalmonech ◽  
Sönke Zaehle ◽  
Gregor J. Schürmann ◽  
Victor Brovkin ◽  
Christian Reick ◽  
...  
Keyword(s):  
Land Surface ◽  
Climate Model ◽  
Earth System Model ◽  
System Model ◽  
Surface Model ◽  
Earth System ◽  
Model Errors ◽  
Max Planck ◽  
C Cycle ◽  
C Stocks

Abstract The capacity of earth system models (ESMs) to make reliable projections of future atmospheric CO2 and climate is strongly dependent on the ability of the land surface model to adequately simulate the land carbon (C) cycle. Defining “adequate” performance of the land model requires an understanding of the contributions of climate model and land model errors to the land C cycle. Here, a benchmarking framework is applied based on significant, observed characteristics of the land C cycle for the contemporary period, for which sufficient evaluation data are available, to test the ability of the JSBACH land surface component of the Max Planck Institute Earth System Model (MPI-ESM) to simulate land C trends. Particular attention is given to the role of potential effects caused by climate biases, and therefore investigation is made of the results of model configurations in which JSBACH is interactively “coupled” to atmosphere and ocean components and of an “uncoupled” configuration, where JSBACH is driven by reconstructed meteorology. The ability of JSBACH to simulate the observed phase of phenology and seasonal C fluxes is not strongly affected by climate biases. Contrarily, noticeable differences in the simulated gross primary productivity and land C stocks emerge between coupled and uncoupled configurations, leading to significant differences in the decadal terrestrial C balance and its sensitivity to climate. These differences are strongly controlled by climate biases of the MPI-ESM, in particular those affecting soil moisture. To effectively characterize model performance, the potential effects of climate biases on the land C dynamics need to be considered during the development and calibration of land surface models.

scholarly journals Modelling Holocene carbon accumulation and methane emissions of boreal wetlands – an Earth system model approach

2013 ◽  
Vol 10 (3) ◽  
pp. 1659-1674 ◽  
Author(s):  
R. J. Schuldt ◽  
V. Brovkin ◽  
T. Kleinen ◽  
J. Winderlich
Keyword(s):  
Land Surface ◽  
Ice Cores ◽  
Methane Emissions ◽  
Earth System Model ◽  
Carbon Accumulation ◽  
System Model ◽  
Surface Model ◽  
Earth System ◽  
Max Planck ◽  
Peat Accumulation

Abstract. Since the Last Glacial Maximum, boreal wetlands have accumulated substantial amounts of peat, estimated at 180–621 Pg of carbon. Wetlands have significantly affected the atmospheric greenhouse gas composition in the past and will play a significant role in future changes of atmospheric CO2 and CH4 concentrations. In order to investigate those changes with an Earth system model, biogeochemical processes in boreal wetlands need to be accounted for. Thus, a model of peat accumulation and decay was developed and included in the land surface model JSBACH of the Max Planck Institute Earth System Model (MPI-ESM). Here we present the evaluation of model results from 6000 yr BP to the pre-industrial period. Over this period of time, 240 Pg of peat carbon accumulated in the model in the areas north of 40° N. Simulated peat accumulation rates agree well with those reported for boreal wetlands. The model simulates CH4 emissions of 49.3 Tg CH4 yr−1 for 6000 yr BP and 51.5 Tg CH4 yr−1 for pre-industrial times. This is within the range of estimates in the literature, which range from 32 to 112 Tg CH4 yr−1 for boreal wetlands. The modelled methane emission for the West Siberian Lowlands and Hudson Bay Lowlands agree well with observations. The rising trend of methane emissions over the last 6000 yr is in agreement with measurements of Antarctic and Greenland ice cores.

scholarly journals Modelling holocene carbon accumulation and methane emissions of boreal wetlands – an earth system model approach

2012 ◽  
Vol 9 (9) ◽  
pp. 12667-12710
Author(s):  
R. J. Schuldt ◽  
V. Brovkin ◽  
T. Kleinen ◽  
J. Winderlich
Keyword(s):  
Land Surface ◽  
Ice Cores ◽  
Methane Emissions ◽  
Earth System Model ◽  
Carbon Accumulation ◽  
System Model ◽  
Surface Model ◽  
Earth System ◽  
Max Planck ◽  
Peat Accumulation

Abstract. Since the Last Glacial Maximum, boreal wetlands have accumulated substantial amounts of peat, estimated at 180–621 Pg of carbon. Wetlands have significantly affected the atmospheric greenhouse gas composition in the past and will play a significant role in future changes of atmospheric CO2 and CH4 concentrations. In order to investigate those changes with an Earth System Model, biogeochemical processes in boreal wetlands need to be accounted for. Thus, a model of peat accumulation and decay was developed and included in the land surface model JSBACH of the Max Planck Institute Earth System Model (MPI-ESM). Here, we present the evaluation of model results from 6000 yr BP to the preindustrial period. Over this period of time, in the model 240 Pg of peat carbon accumulated in the areas north of 40° N. Simulated peat accumulation rates agree well with those reported for boreal wetlands. The model simulates CH4 emissions of 49.3 Tg yr−1 for 6000 yr BP and 51.5 Tg yr−1 for preindustrial times. This is within the range of estimates in the literature, which range from 32 to 112 Tg yr−1 for boreal wetlands. The modeled methane emission for West Siberian Lowlands and Hudson Bay Lowlands agree well with observations. The rising trend of methane emissions over the last 6000 yr is in agreement with measurements of Antarctic and Greenland ice cores.

scholarly journals Coupling the U.K. Earth System Model to dynamic models of the Greenland and Antarctic ice sheets

2021 ◽  
Author(s):  
Robin Smith ◽  
Pierre Mathiot ◽  
Antony Siahaan ◽  
Victoria Lee ◽  
Stephen Cornford ◽  
...  
Keyword(s):  
Land Surface ◽  
Dynamic Models ◽  
Ice Sheets ◽  
Ice Sheet ◽  
Ocean Model ◽  
Earth System Model ◽  
System Model ◽  
Surface Model ◽  
Earth System ◽  
Antarctic Ice Sheets

<p>In this presentation we describe how models of the Greenland and Antarctic ice sheets have been incorporated in the global U.K. Earth System model (UKESM1) with a two-way coupling that passes fluxes of energy, water and the locations of ice surfaces between the component models. Offline, file-based coupling is used throughout to pass information between the components, which is both physically appropriate and convenient within the UKESM1 structure. Ice sheet surface mass balance is computed in the land surface model using sub-gridscale multi-layer snowpacks. Icebergs calved from the ice sheets are fed into a Langrangian iceberg drift scheme in the ocean. Ice shelf basal melt is explicitly calculated in cavities resolved by the ocean model, and ice sheet and shelf geometries are kept consistent in all components. We demonstrate that our coupled model remains stable when simulating changes in ice sheet height, extent and grounding-line position of hundreds of kilometres.</p>

Results from An Ensemble Reanalysis with the Community Earth System Model 2.1

2020 ◽  
Author(s):  
Kevin Raeder ◽  
Jeffrey Anderson ◽  
TImothy Hoar ◽  
Nancy Collins ◽  
Moha El Gharamti
Keyword(s):  
Sea Ice ◽  
Land Surface ◽  
Land Surface Model ◽  
Atmospheric Model ◽  
Earth System Model ◽  
System Model ◽  
Surface Model ◽  
Earth System ◽  
Atmospheric Forcing ◽  
Community Earth System Model

<p>The National Center for Atmospheric Research (NCAR) has recently released version 2.1 of the Community Earth System Model (CESM 2.1). A twenty-year, 80-member ensemble atmospheric reanalysis with 1-degree resolution in the CAM6 atmospheric model is being produced using NCAR’s Data Assimilation Research Testbed (DART) to support a variety of climate research goals. A standard configuration of CAM and the CLM5 land surface model will be coupled to a prescribed ocean and sea ice. Eventually, the reanalyisis will generate a final product that extends from 1999 to the present. Observations being assimilated include in situ observations used in the operational NCEP CFSR reanalysis along with GPS occultation observations and remote sensing temperature retrievals. The primary goal is to provide an ensemble of atmospheric forcing that can be used to generate additional ensemble reanalyses for other components of CESM including CLM, the POP and MOM6 ocean models, and the CICE sea ice model. Highlights of results from the first 10-years of the reanalysis will be presented. Results will include evaluation of short-term forecasts in observation space for root mean square error, ensemble spread, and ensemble consistency. In addition, key aspects of the atmospheric forcing files for other components of the climate system will be discussed. </p>

scholarly journals Simulations of the Mid-Pliocene Warm Period using the NASA/GISS ModelE2-R Earth System Model

2012 ◽  
Vol 5 (3) ◽  
pp. 2811-2842 ◽  
Author(s):  
M. A. Chandler ◽  
L. E. Sohl ◽  
J. A. Jonas ◽  
H. J. Dowsett
Keyword(s):  
North Atlantic ◽  
Climate Models ◽  
Climate Model ◽  
Geographic Region ◽  
Earth System Model ◽  
Warm Period ◽  
System Model ◽  
Earth System ◽  
Intergovernmental Panel ◽  
Future Global Warming

Abstract. Climate reconstructions of the mid-Pliocene Warm Period (mPWP) bear many similarities to aspects of future global warming as projected by the Intergovernmental Panel on Climate Change. In particular, marine and terrestrial paleoclimate data point to high latitude temperature amplification, with associated decreases in sea ice and land ice and altered vegetation distributions that show expansion of warmer climate biomes into higher latitudes. NASA GISS climate models have been used to study the Pliocene climate since the USGS PRISM project first identified that the mid-Pliocene North Atlantic sea surface temperatures were anomalously warm. Here we present the most recent simulations of the Pliocene using the AR5/CMIP5 version of the GISS Earth System Model known as ModelE2-R. These simulations constitute the NASA contribution to the Pliocene Model Intercomparison Project (PlioMIP) Experiment 2. Many findings presented here corroborate results from other PlioMIP multi-model ensemble papers, but we also emphasize features in the ModelE2-R simulations that are unlike the ensemble means. We provide discussion of features that show considerable improvement compared with simulations from previous versions of the NASA GISS models, improvement defined here as simulation results that more closely resemble the ocean core data as well as the PRISM3D reconstructions of the mid-Pliocene climate. In some regions even qualitative agreement between model results and paleodata are an improvement over past studies, but the dramatic warming in the North Atlantic and Greenland-Iceland-Norwegian Sea in these new simulations is by far the most accurate portrayal ever of this key geographic region by the GISS climate model. Our belief is that continued development of key physical routines in the atmospheric model, along with higher resolution and recent corrections to mixing parameterizations in the ocean model, have led to an Earth System Model that will produce more accurate projections of future climate.

scholarly journals Comparison of ocean vertical mixing schemes in the Max Plank Institute Earth System Model (MPI-ESM1.2)

2020 ◽  
Author(s):  
Oliver Gutjahr ◽  
Nils Brüggemann ◽  
Helmuth Haak ◽  
Johann H. Jungclaus ◽  
Dian A. Putrasahan ◽  
...  
Keyword(s):  
Vertical Mixing ◽  
Global Scale ◽  
Earth System Model ◽  
System Model ◽  
The Arctic ◽  
Earth System ◽  
Max Planck ◽  
Vertical Diffusion ◽  
Mixing Schemes ◽  
Mean State

Abstract. We compare the effects of four different ocean vertical mixing schemes on the ocean mean state simulated by the Max Planck Institute Earth System Model (MPI-ESM1.2) in the framework of the Community Vertical Mixing (CVMix) library. Besides the PP and KPP scheme, we implemented the TKE scheme and a recently developed prognostic scheme for internal wave energy and its dissipation (IDEMIX) to replace the often assumed constant background diffusivity in the ocean interior. We analyse in particular the effects of IDEMIX on the ocean mean state, when combined with TKE (TKE+IDEMIX). In general, we find little sensitivity of the ocean surface, but considerable effects for the interior ocean. Overall, we cannot classify any scheme as superior, because they modify biases that vary by region or variable, but produce a similar pattern on the global scale. However, using a more realistic and energetically consistent scheme (TKE+IDEMIX) produces a more heterogeneous pattern of vertical diffusion, with lower diffusivity in deep and flat-bottom basins and elevated turbulence over rough topography. In addition, TKE+IDEMIX improves the circulation in the Nordic Seas and Fram Strait, thus reducing the warm bias of the Atlantic water (AW) layer in the Arctic Ocean to a similar extent as has been demonstrated with eddy-resolving ocean models. We conclude that although shortcomings due to model resolution determine the global-scale bias pattern, the choice of the vertical mixing scheme may play an important role for regional biases.

scholarly journals The EC-Earth3 Earth System Model for the Climate Model Intercomparison Project 6

2021 ◽  
Author(s):  
Ralf Döscher ◽  
Mario Acosta ◽  
Andrea Alessandri ◽  
Peter Anthoni ◽  
Almut Arneth ◽  
...  
Keyword(s):  
Physical Performance ◽  
Performance Metrics ◽  
Climate Model ◽  
Earth System Model ◽  
System Model ◽  
Historical Period ◽  
Earth System ◽  
Dynamic Features ◽  
The Earth ◽  
Intercomparison Project

Abstract. The Earth System Model EC-Earth3 for contributions to CMIP6 is documented here, with its flexible coupling framework, major model configurations, a methodology for ensuring the simulations are comparable across different HPC systems, and with the physical performance of base configurations over the historical period. The variety of possible configurations and sub-models reflects the broad interests in the EC-Earth community. EC-Earth3 key performance metrics demonstrate physical behaviour and biases well within the frame known from recent CMIP models. With improved physical and dynamic features, new ESM components, community tools, and largely improved physical performance compared to the CMIP5 version, EC-Earth3 represents a clear step forward for the only European community ESM. We demonstrate here that EC-Earth3 is suited for a range of tasks in CMIP6 and beyond.

Recent developments on the Earth System Model Evaluation Tool

2021 ◽  
Author(s):  
Bouwe Andela ◽  
Fakhereh Alidoost ◽  
Lukas Brunner ◽  
Jaro Camphuijsen ◽  
Bas Crezee ◽  
...  
Keyword(s):  
Model Evaluation ◽  
Performance Metrics ◽  
Climate Model ◽  
Earth System Model ◽  
System Model ◽  
Earth System ◽  
Evaluation Tool ◽  
Scientific Review ◽  
The Earth ◽  
User Friendly

<p>The Earth System Model Evaluation Tool (ESMValTool) is a free and open-source community diagnostic and performance metrics tool for the evaluation of Earth system models such as those participating in the Coupled Model Intercomparison Project (CMIP). Version 2 of the tool (Righi et al. 2020, www.esmvaltool.org) features a brand new design composed of a core that finds and processes data according to a ‘recipe’ and an extensive collection of ready-to-use recipes and associated diagnostic codes for reproducing results from published papers. Development and discussion of the tool (mostly) takes place in public on https://github.com/esmvalgroup and anyone with an interest in climate model evaluation is welcome to join there.</p><p> </p><p>Since the initial release of version 2 in the summer of 2020, many improvements have been made to the tool. It is now more user friendly with extensive documentation available on docs.esmvaltool.org and a step by step online tutorial. Regular releases, currently planned three times a year, ensure that recent contributions become available quickly while still ensuring a high level of quality control. The tool can be installed from conda, but portable docker and singularity containers are also available.</p><p> </p><p>Recent new features include a more user-friendly command-line interface, citation information per figure including CMIP6 data citation using ES-DOC, more and faster preprocessor functions that require less memory, automatic corrections for a larger number of CMIP6 datasets, support for more observational and reanalysis datasets, and more recipes and diagnostics.</p><p> </p><p>The tool is now also more reliable, with improved automated testing through more unit tests for the core, as well as a recipe testing service running at DKRZ for testing the scientific recipes and diagnostics that are bundled into the tool. The community maintaining and developing the tool is growing, making the project less dependent on individual contributors. There are now technical and scientific review teams that review new contributions for technical quality and scientific correctness and relevance respectively, two new principal investigators for generating a larger support base in the community, and a newly created user engagement team that is taking care of improving the overall user experience.</p>

scholarly journals Towards a more objective evaluation of modelled land-carbon trends using atmospheric CO<sub>2</sub> and satellite-based vegetation activity observations

2013 ◽  
Vol 10 (6) ◽  
pp. 4189-4210 ◽  
Author(s):  
D. Dalmonech ◽  
S. Zaehle
Keyword(s):  
Land Surface ◽  
Climate Model ◽  
Spatial Scales ◽  
Evaluation Framework ◽  
Atmospheric Co2 ◽  
Evaluation Methodology ◽  
Surface Model ◽  
System Modelling ◽  
Earth System ◽  
Vegetation Activity

Abstract. Terrestrial ecosystem models used for Earth system modelling show a significant divergence in future patterns of ecosystem processes, in particular the net land–atmosphere carbon exchanges, despite a seemingly common behaviour for the contemporary period. An in-depth evaluation of these models is hence of high importance to better understand the reasons for this disagreement. Here, we develop an extension for existing benchmarking systems by making use of the complementary information contained in the observational records of atmospheric CO2 and remotely sensed vegetation activity to provide a novel set of diagnostics of ecosystem responses to climate variability in the last 30 yr at different temporal and spatial scales. The selection of observational characteristics (traits) specifically considers the robustness of information given that the uncertainty of both data and evaluation methodology is largely unknown or difficult to quantify. Based on these considerations, we introduce a baseline benchmark – a minimum test that any model has to pass – to provide a more objective, quantitative evaluation framework. The benchmarking strategy can be used for any land surface model, either driven by observed meteorology or coupled to a climate model. We apply this framework to evaluate the offline version of the MPI Earth System Model's land surface scheme JSBACH. We demonstrate that the complementary use of atmospheric CO2 and satellite-based vegetation activity data allows pinpointing of specific model deficiencies that would not be possible by the sole use of atmospheric CO2 observations.

scholarly journals The Canadian Earth System Model version 5 (CanESM5.0.3)

2019 ◽  
Vol 12 (11) ◽  
pp. 4823-4873 ◽  
Author(s):  
Neil C. Swart ◽  
Jason N. S. Cole ◽  
Viatcheslav V. Kharin ◽  
Mike Lazare ◽  
John F. Scinocca ◽  
...  
Keyword(s):  
Land Surface ◽  
General Circulation ◽  
Large Scale ◽  
General Circulation Models ◽  
Earth System Model ◽  
System Model ◽  
Historical Period ◽  
Earth System ◽  
Historical Climate ◽  
Model Version

Abstract. The Canadian Earth System Model version 5 (CanESM5) is a global model developed to simulate historical climate change and variability, to make centennial-scale projections of future climate, and to produce initialized seasonal and decadal predictions. This paper describes the model components and their coupling, as well as various aspects of model development, including tuning, optimization, and a reproducibility strategy. We also document the stability of the model using a long control simulation, quantify the model's ability to reproduce large-scale features of the historical climate, and evaluate the response of the model to external forcing. CanESM5 is comprised of three-dimensional atmosphere (T63 spectral resolution equivalent roughly to 2.8∘) and ocean (nominally 1∘) general circulation models, a sea-ice model, a land surface scheme, and explicit land and ocean carbon cycle models. The model features relatively coarse resolution and high throughput, which facilitates the production of large ensembles. CanESM5 has a notably higher equilibrium climate sensitivity (5.6 K) than its predecessor, CanESM2 (3.7 K), which we briefly discuss, along with simulated changes over the historical period. CanESM5 simulations contribute to the Coupled Model Intercomparison Project phase 6 (CMIP6) and will be employed for climate science and service applications in Canada.

Sign in / Sign up

Export Citation Format

Share Document