scholarly journals An Evaluation of Marine Boundary Layer Cloud Property Simulations in the Community Atmosphere Model Using Satellite Observations: Conventional Subgrid Parameterization versus CLUBB

2018 ◽  
Vol 31 (6) ◽  
pp. 2299-2320 ◽  
Author(s):  
Hua Song ◽  
Zhibo Zhang ◽  
Po-Lun Ma ◽  
Steven J. Ghan ◽  
Minghuai Wang
Keyword(s):  
Boundary Layer ◽  
Radiative Forcing ◽  
Marine Boundary Layer ◽  
Detection Threshold ◽  
Satellite Observation ◽  
Cloud Fraction ◽  
Cloud Properties ◽  
Community Atmosphere Model ◽  
Direct Model ◽  
Atmosphere Model

This paper presents a satellite-observation-based evaluation of the marine boundary layer (MBL) cloud properties from two Community Atmosphere Model, version 5 (CAM5), simulations, one with the standard parameterization schemes (CAM5–Base) and the other with the Cloud Layers Unified by Binormals scheme (CAM5–CLUBB). When comparing the direct model outputs, the authors find that CAM5–CLUBB produces more MBL clouds, a smoother transition from stratocumulus to cumulus, and a tighter correlation between in-cloud water and cloud fraction than CAM5–Base. In the model-to-observation comparison using the COSP satellite simulators, the authors find that both simulations capture the main features and spatial patterns of the observed cloud fraction from MODIS and shortwave cloud radiative forcing (SWCF) from CERES. However, CAM5–CLUBB suffers more than CAM5–Base from a problem that can be best summarized as “undetectable” clouds (i.e., a significant fraction of simulated MBL clouds are thinner than the MODIS detection threshold). This issue leads to a smaller COSP–MODIS cloud fraction and a weaker SWCF in CAM5–CLUBB than the observations and also CAM5–Base in the tropical descending regions. Finally, the authors compare modeled radar reflectivity with CloudSat observations and find that both simulations, especially CAM5–CLUBB, suffer from an excessive drizzle problem. Further analysis reveals that the subgrid precipitation enhancement factors in CAM5–CLUBB are unrealistically large, which makes MBL clouds precipitate too excessively, and in turn results in too many undetectable thin clouds.

Exposing Global Cloud Biases in the Community Atmosphere Model (CAM) Using Satellite Observations and Their Corresponding Instrument Simulators

2012 ◽  
Vol 25 (15) ◽  
pp. 5190-5207 ◽  
Author(s):  
J. E. Kay ◽  
B. R. Hillman ◽  
S. A. Klein ◽  
Y. Zhang ◽  
B. Medeiros ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Marine Boundary Layer ◽  
Climate Model ◽  
Substantial Improvement ◽  
Satellite Observations ◽  
Cloud Properties ◽  
Community Atmosphere Model ◽  
Realistic Representation ◽  
Model Cloud ◽  
Atmosphere Model

Abstract Satellite observations and their corresponding instrument simulators are used to document global cloud biases in the Community Atmosphere Model (CAM) versions 4 and 5. The model–observation comparisons show that, despite having nearly identical cloud radiative forcing, CAM5 has a much more realistic representation of cloud properties than CAM4. In particular, CAM5 exhibits substantial improvement in three long-standing climate model cloud biases: 1) the underestimation of total cloud, 2) the overestimation of optically thick cloud, and 3) the underestimation of midlevel cloud. While the increased total cloud and decreased optically thick cloud in CAM5 result from improved physical process representation, the increased midlevel cloud in CAM5 results from the addition of radiatively active snow. Despite these improvements, both CAM versions have cloud deficiencies. Of particular concern, both models exhibit large but differing biases in the subtropical marine boundary layer cloud regimes that are known to explain intermodel differences in cloud feedbacks and climate sensitivity. More generally, this study demonstrates that simulator-facilitated evaluation of cloud properties, such as amount by vertical level and optical depth, can robustly expose large and at times radiatively compensating climate model cloud biases.

scholarly journals Statistical Analyses of Satellite Cloud Object Data from CERES. Part V: Relationships between Physical Properties of Marine Boundary Layer Clouds

2008 ◽  
Vol 21 (24) ◽  
pp. 6668-6688 ◽  
Author(s):  
Zachary A. Eitzen ◽  
Kuan-Man Xu ◽  
Takmeng Wong
Keyword(s):  
Boundary Layer ◽  
Cluster Analysis ◽  
Physical Properties ◽  
Radiative Forcing ◽  
Marine Boundary Layer ◽  
Radiant Energy ◽  
Cloud Fraction ◽  
Cloud Radiative Forcing ◽  
Boundary Layer Clouds ◽  
Shallow Cumulus

Abstract Relationships between physical properties are studied for three types of marine boundary layer cloud objects identified with the Clouds and the Earth’s Radiant Energy System (CERES) footprint data from the Tropical Rainfall Measuring Mission satellite between 30°S and 30°N. Each cloud object is a contiguous region of CERES footprints that have cloud-top heights below 3 km, and cloud fractions of 99%–100% (overcast type), 40%–99% (stratocumulus type), or 10%–40% (shallow cumulus type). These cloud fractions represent the fraction of ∼2 km × 2 km Visible/Infrared Scanner pixels that are cloudy within each ∼10 km × 10 km footprint. The cloud objects have effective diameters that are greater than 300 km for the overcast and stratocumulus types, and greater than 150 km for the shallow cumulus type. The Spearman rank correlation coefficient is calculated between many microphysical/optical [effective radius (re), cloud optical depth (τ), albedo, liquid water path, and shortwave cloud radiative forcing (SW CRF)] and macrophysical [outgoing longwave radiation (OLR), cloud fraction, cloud-top temperature, longwave cloud radiative forcing (LW CRF), and sea surface temperature (SST)] properties for each of the three cloud object types. When both physical properties are of the same category (microphysical/optical or macrophysical), the magnitude of the correlation tends to be higher than when they are from different categories. The magnitudes of the correlations also change with cloud object type, with the correlations for overcast and stratocumulus cloud objects tending to be higher than those for shallow cumulus cloud objects. Three pairs of physical properties are studied in detail, using a k-means cluster analysis: re and τ, OLR and SST, and LW CRF and SW CRF. The cluster analysis of re and τ reveals that for each of the cloud types, there is a cluster of cloud objects with negative slopes, a cluster with slopes near zero, and two clusters with positive slopes. The joint OLR and SST probability plots show that the OLR tends to decrease with SST in regions with boundary layer clouds for SSTs above approximately 298 K. When the cloud objects are split into “dry” and “moist” clusters based on the amount of precipitable water above 700 hPa, the associated OLRs increase with SST throughout the SST range for the dry clusters, but the OLRs are roughly constant with SST for the moist cluster. An analysis of the joint PDFs of LW CRF and SW CRF reveals that while the magnitudes of both LW and SW CRFs generally increase with cloud fraction, there is a cluster of overcast cloud objects that has low values of LW and SW CRF. These objects are generally located near the Sahara Desert, and may be contaminated with dust. Many of these overcast objects also appear in the re and τ cluster with negative slopes.

scholarly journals Effect of biomass burning on marine stratocumulus clouds off the California coast

2009 ◽  
Vol 9 (22) ◽  
pp. 8841-8856 ◽  
Author(s):  
J. Brioude ◽  
O. R. Cooper ◽  
G. Feingold ◽  
M. Trainer ◽  
S. R. Freitas ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Biomass Burning ◽  
Radiative Forcing ◽  
Marine Boundary Layer ◽  
Cloud Fraction ◽  
Marine Stratocumulus ◽  
Cloud Albedo ◽  
Stratocumulus Clouds ◽  
Absorbing Aerosols ◽  
Indirect Radiative Forcing

Abstract. Aerosol-cloud interactions are considered to be one of the most important and least known forcings in the climate system. Biomass burning aerosols are of special interest due to their radiative impact (direct and indirect effect) and their potential to increase in the future due to climate change. Combining data from Geostationary Operational Environmental Satellite (GOES) and MODerate-resolution Imaging Spectroradiometer (MODIS) with passive tracers from the FLEXPART Lagrangian Particle Dispersion Model, the impact of biomass burning aerosols on marine stratocumulus clouds has been examined in June and July of 2006–2008 off the California coast. Using a continental tracer, the indirect effect of biomass burning aerosols has been isolated by comparing the average cloud fraction and cloud albedo for different meteorological situations, and for clean versus polluted (in terms of biomass burning) continental air masses at 14:00 local time. Within a 500 km-wide band along the coast of California, biomass burning aerosols, which tend to reside above the marine boundary layer, increased the cloud fraction by 0.143, and the cloud albedo by 0.038. Absorbing aerosols located above the marine boundary layer lead to an increase of the lower tropospheric stability and a reduction in the vertical entrainment of dry air from above, leading to increased cloud formation. The combined effect was an indirect radiative forcing of −7.5% ±1.7% (cooling effect) of the outgoing radiative flux at the top of the atmosphere on average, with a bias due to meteorology of +0.9%. Further away from the coast, the biomass burning aerosols, which were located within the boundary layer, reduced the cloud fraction by 0.023 and the cloud albedo by 0.006, resulting in an indirect radiative forcing of +1.3% ±0.3% (warming effect) with a bias of +0.5%. These results underscore the dual role that absorbing aerosols play in cloud radiative forcing.

scholarly journals Investigation of Regional and Seasonal Variations in Marine Boundary Layer Cloud Properties from MODIS Observations

2008 ◽  
Vol 21 (19) ◽  
pp. 4955-4973 ◽  
Author(s):  
Michael P. Jensen ◽  
Andrew M. Vogelmann ◽  
William D. Collins ◽  
Guang J. Zhang ◽  
Edward P. Luke
Keyword(s):  
Boundary Layer ◽  
General Circulation ◽  
Climate Models ◽  
Marine Boundary Layer ◽  
General Circulation Models ◽  
Test Bed ◽  
Liquid Water Path ◽  
Microphysical Properties ◽  
Cloud Properties ◽  
Peak Versus

Abstract To aid in understanding the role that marine boundary layer (MBL) clouds play in climate and assist in improving their representations in general circulation models (GCMs), their long-term microphysical and macroscale characteristics are quantified using observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument aboard the National Aeronautics and Space Administration’s (NASA’s) Terra satellite. Six years of MODIS pixel-level cloud products are used from oceanic study regions off the west coasts of California, Peru, the Canary Islands, Angola, and Australia where these cloud types are common. Characterizations are given for their organization (macroscale structure), the associated microphysical properties, and the seasonal dependencies of their variations for scales consistent with the size of a GCM grid box (300 km × 300 km). MBL mesoscale structure is quantified using effective cloud diameter CD, which is introduced here as a simplified measure of bulk cloud organization; it is straightforward to compute and provides descriptive information beyond that offered by cloud fraction. The interrelationships of these characteristics are explored while considering the influences of the MBL state, such as the occurrence of drizzle. Several commonalities emerge for the five study regions. MBL clouds contain the best natural examples of plane-parallel clouds, but overcast clouds occur in only about 25% of the scenes, which emphasizes the importance of representing broken MBL cloud fields in climate models (that are subgrid scale). During the peak months of cloud occurrence, mesoscale organization (larger CD) increases such that the fractions of scenes characterized as “overcast” and “clumped” increase at the expense of the “scattered” scenes. Cloud liquid water path and visible optical depth usually trend strongly with CD, with the largest values occurring for scenes that are drizzling. However, considerable interregional differences exist in these trends, suggesting that different regression functionalities exist for each region. For peak versus off-peak months, the fraction of drizzling scenes (as a function of CD) are similar for California and Angola, which suggests that a single probability distribution function might be used for their drizzle occurrence in climate models. The patterns are strikingly opposite for Peru and Australia; thus, the contrasts among regions may offer a test bed for model simulations of MBL drizzle occurrence.

scholarly journals Direct comparisons of ice cloud macro- and microphysical properties simulated by the Community Atmosphere Model version 5 with HIPPO aircraft observations

2017 ◽  
Vol 17 (7) ◽  
pp. 4731-4749 ◽  
Author(s):  
Chenglai Wu ◽  
Xiaohong Liu ◽  
Minghui Diao ◽  
Kai Zhang ◽  
Andrew Gettelman ◽  
...  
Keyword(s):  
Nucleation And Growth ◽  
Ice Nucleation ◽  
Ice Crystal ◽  
Ice Clouds ◽  
Model Version ◽  
Microphysical Properties ◽  
Cloud Properties ◽  
Community Atmosphere Model ◽  
Atmosphere Model ◽  
Ice Water

Abstract. In this study we evaluate cloud properties simulated by the Community Atmosphere Model version 5 (CAM5) using in situ measurements from the HIAPER Pole-to-Pole Observations (HIPPO) campaign for the period of 2009 to 2011. The modeled wind and temperature are nudged towards reanalysis. Model results collocated with HIPPO flight tracks are directly compared with the observations, and model sensitivities to the representations of ice nucleation and growth are also examined. Generally, CAM5 is able to capture specific cloud systems in terms of vertical configuration and horizontal extension. In total, the model reproduces 79.8 % of observed cloud occurrences inside model grid boxes and even higher (94.3 %) for ice clouds (T ≤ −40 °C). The missing cloud occurrences in the model are primarily ascribed to the fact that the model cannot account for the high spatial variability of observed relative humidity (RH). Furthermore, model RH biases are mostly attributed to the discrepancies in water vapor, rather than temperature. At the micro-scale of ice clouds, the model captures the observed increase of ice crystal mean sizes with temperature, albeit with smaller sizes than the observations. The model underestimates the observed ice number concentration (Ni) and ice water content (IWC) for ice crystals larger than 75 µm in diameter. Modeled IWC and Ni are more sensitive to the threshold diameter for autoconversion of cloud ice to snow (Dcs), while simulated ice crystal mean size is more sensitive to ice nucleation parameterizations than to Dcs. Our results highlight the need for further improvements to the sub-grid RH variability and ice nucleation and growth in the model.

scholarly journals Intercomparisons of marine boundary layer cloud properties from the ARM CAP‐MBL campaign and two MODIS cloud products

2017 ◽  
Vol 122 (4) ◽  
pp. 2351-2365 ◽  
Author(s):  
Zhibo Zhang ◽  
Xiquan Dong ◽  
Baike Xi ◽  
Hua Song ◽  
Po‐Lun Ma ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Marine Boundary Layer ◽  
Cloud Properties ◽  
Boundary Layer Cloud ◽  
Layer Cloud

A 19-Month Record of Marine Aerosol–Cloud–Radiation Properties Derived from DOE ARM Mobile Facility Deployment at the Azores. Part I: Cloud Fraction and Single-Layered MBL Cloud Properties

2014 ◽  
Vol 27 (10) ◽  
pp. 3665-3682 ◽  
Author(s):  
Xiquan Dong ◽  
Baike Xi ◽  
Aaron Kennedy ◽  
Patrick Minnis ◽  
Robert Wood
Keyword(s):  
Boundary Layer ◽  
High Pressure ◽  
Liquid Water ◽  
Mixed Boundary ◽  
Cloud Condensation Nuclei ◽  
Low Pressure ◽  
Cloud Fraction ◽  
Cloud Base ◽  
Microphysical Properties ◽  
Cloud Properties

Abstract A 19-month record of total and single-layered low (<3 km), middle (3–6 km), and high (>6 km) cloud fractions (CFs) and the single-layered marine boundary layer (MBL) cloud macrophysical and microphysical properties was generated from ground-based measurements at the Atmospheric Radiation Measurement Program (ARM) Azores site between June 2009 and December 2010. This is the most comprehensive dataset of marine cloud fraction and MBL cloud properties. The annual means of total CF and single-layered low, middle, and high CFs derived from ARM radar and lidar observations are 0.702, 0.271, 0.01, and 0.106, respectively. Greater total and single-layered high (>6 km) CFs occurred during the winter, whereas single-layered low (<3 km) CFs were more prominent during summer. Diurnal cycles for both total and low CFs were stronger during summer than during winter. The CFs are bimodally distributed in the vertical with a lower peak at ~1 km and a higher peak between 8 and 11 km during all seasons, except summer when only the low peak occurs. Persistent high pressure and dry conditions produce more single-layered MBL clouds and fewer total clouds during summer, whereas the low pressure and moist air masses during winter generate more total and multilayered clouds, and deep frontal clouds associated with midlatitude cyclones. The seasonal variations of cloud heights and thickness are also associated with the seasonal synoptic patterns. The MBL cloud layer is low, warm, and thin with large liquid water path (LWP) and liquid water content (LWC) during summer, whereas during winter it is higher, colder, and thicker with reduced LWP and LWC. The cloud LWP and LWC values are greater at night than during daytime. The monthly mean daytime cloud droplet effective radius re values are nearly constant, while the daytime droplet number concentration Nd basically follows the LWC variation. There is a strong correlation between cloud condensation nuclei (CCN) concentration NCCN and Nd during January–May, probably due to the frequent low pressure systems because upward motion brings more surface CCN to cloud base (well-mixed boundary layer). During summer and autumn, the correlation between Nd and NCCN is not as strong as that during January–May because downward motion from high pressure systems is predominant. Compared to the compiled aircraft in situ measurements during the Atlantic Stratocumulus Transition Experiment (ASTEX), the cloud microphysical retrievals in this study agree well with historical aircraft data. Different air mass sources over the ARM Azores site have significant impacts on the cloud microphysical properties and surface CCN as demonstrated by great variability in NCCN and cloud microphysical properties during some months.

Relating Satellite-Observed Cloud Properties from MODIS to Meteorological Conditions for Marine Boundary Layer Clouds

2010 ◽  
Vol 23 (6) ◽  
pp. 1374-1391 ◽  
Author(s):  
Guang J. Zhang ◽  
Andrew M. Vogelmann ◽  
Michael P. Jensen ◽  
William D. Collins ◽  
Edward P. Luke
Keyword(s):  
Boundary Layer ◽  
Meteorological Parameters ◽  
Marine Boundary Layer ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Liquid Water Path ◽  
Near Surface ◽  
Cloud Properties ◽  
Lower Tropospheric Stability

Abstract This study examines 6 yr of cloud properties observed by the Moderate Resolution Imaging Spectroradiometer (MODIS) on board the NASA Terra satellite in five prominent marine boundary layer (MBL) cloud regions (California, Peru, Canary, Angola, and Australia) and investigates their relationships with near-surface meteorological parameters obtained from NCEP reanalyses. About 62 000 independent scenes are used to examine the instantaneous relationships between cloud properties and meteorological parameters that may be used for global climate model (GCM) diagnostics and parameterization. Cloud liquid water path (LWP) generally increases with lower-tropospheric stability (LTS) and lifting condensation level (LCL), whereas cloud drizzle frequency is favored by weak LTS and negligible cold air advection. Cloud fraction (CF) depends strongly on variations in LTS, and to a lesser extent on surface air temperature advection and LCL, although the relationships vary from region to region. The authors propose capturing the effects of these three parameters on CF via their linear combination in terms of a single parameter, the effective lower-tropospheric stability (eLTS). Results indicate that eLTS offers a marked improvement over LTS alone in explaining the median CF variations within the different study regions. A parameterization of CF in terms of eLTS is provided, which produces results that are improved over those of Klein and Hartmann’s LTS-only parameterization. However, the new parameterization may not predict the observed variability correctly, and the authors propose a method that might address this shortcoming via a statistical approach.

scholarly journals Observed correlations between aerosol and cloud properties in an Indian Ocean trade cumulus regime

2015 ◽  
Vol 15 (20) ◽  
pp. 29347-29402 ◽  
Author(s):  
K. Pistone ◽  
P. S. Praveen ◽  
R. M. Thomas ◽  
V. Ramanathan ◽  
E. Wilcox ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Water Vapor ◽  
Indian Ocean ◽  
Liquid Water ◽  
Radiative Forcing ◽  
Cloud Base ◽  
Future Research ◽  
Air Mass ◽  
Vapor Flux ◽  
Cloud Properties

Abstract. There are many contributing factors which determine the micro- and macrophysical properties of clouds, including atmospheric structure, dominant meteorological conditions, and aerosol concentration, all of which may be coupled to one another. In the quest to determine aerosol effects on clouds, these potential relationships must be understood, as changes in atmospheric conditions due to aerosol may change the expected magnitude of indirect effects by altering cloud properties in unexpected ways. Here we describe several observed correlations between aerosol conditions and cloud and atmospheric properties in the Indian Ocean winter monsoon season. In the CARDEX (Cloud, Aerosol, Radiative forcing, Dynamics EXperiment) field campaign conducted in February and March 2012 in the northern Indian Ocean, continuous measurements of atmospheric precipitable water vapor and the liquid water path (LWP) of trade cumulus clouds were made, concurrent with measurements of water vapor flux, cloud and aerosol vertical profiles, meteorological data, and surface and total-column aerosol. Here we present evidence of a positive correlation between aerosol and cloud LWP which becomes clear after the data are filtered to control for the natural meteorological variability in the region. We then use the aircraft and ground observatory measurements to explore the mechanisms behind the observed aerosol–LWP correlation. We determine that increased boundary-layer humidity lowering the cloud base is responsible for the observed increase in cloud liquid water. Large-scale analysis indicates that high pollution cases originate with a highly-polluted boundary layer air mass approaching the observatory from a northwesterly direction. This polluted mass exhibits higher temperatures and humidity than the clean case, the former of which may be attributable to heating due to aerosol absorption of solar radiation over the subcontinent. While high temperature conditions dispersed along with the high-aerosol anomaly, the high humidity condition was observed to instead develop along with the polluted air mass. We then explore potential causal mechanisms of the observed correlations, though future research will be needed to more fully describe the aerosol–humidity relationship.

Sign in / Sign up

Export Citation Format

Share Document