Generalized Hotelling T2 control chart based on bivariate ranked set techniques with runs rules

2021 ◽  
pp. 014233122199267
Author(s):  
Rashid Mehmood ◽  
Muhammad Riaz ◽  
Iftikhar Ali ◽  
Muhammad Hisyam Lee
Keyword(s):  
Control Chart ◽  
Control Charts ◽  
The Other ◽  
Special Cases ◽  
Runs Rules ◽  
And Control ◽  
T2 Control Chart ◽  
Power Curves ◽  
Control Limits

In this study, we have introduced a generalized Hotelling T2 control chart based on bivariate ranked set techniques with runs rules to identify small and moderate variations in a process mean vector. To achieve this aim, plotting statistic and control limits are formulated in generalized approaches. For evaluation purposes, power and power curves are used as performance indicators. Afterwards, power curves are drawn through Monte Carlo simulation procedures by taking into account different choices of factors. A detailed discussion about the role of factors on the performance of the proposed generalized control chart is included. Furthermore, the proposed generalized control chart with double bivariate ranked set techniques is noted to be superb compared to the other cases of single bivariate ranked set techniques. Among single and double versions of bivariate ranked set techniques, the proposed generalized control chart on the basis of median bivariate ranked set techniques is recorded as more efficient relative to the other choices under consideration. Also, comparative analysis shows that the proposed generalized control chart with supplementary runs rules performs outstandingly for detection of small and moderate variations relative to existing control charts. Special cases of the proposed generalized control chart are elaborated to highlight its features for accommodating the existing control charts. To amplify the uses and advantages of the proposed generalized control chart, a real-world example from agriculture is presented.

From Container to Claustrum: Projective Identification in Couples

2014 ◽  
Vol 4 (2) ◽  
Author(s):  
Tamara Feldman
Keyword(s):  
Psychological Health ◽  
Projective Identification ◽  
The Self ◽  
The Other ◽  
Intimate Partners ◽  
And Control ◽  
The Relationship ◽  
As If

This paper is a contribution to the growing literature on the role of projective identification in understanding couples' dynamics. Projective identification as a defence is well suited to couples, as intimate partners provide an ideal location to deposit unwanted parts of the self. This paper illustrates how projective identification functions differently depending on the psychological health of the couple. It elucidates how healthier couples use projective identification more as a form of communication, whereas disturbed couples are inclined to employ it to invade and control the other, as captured by Meltzer's concept of "intrusive identification". These different uses of projective identification affect couples' capacities to provide what Bion called "containment". In disturbed couples, partners serve as what Meltzer termed "claustrums" whereby projections are not contained, but imprisoned or entombed in the other. Applying the concept of claustrum helps illuminate common feelings these couples express, such as feeling suffocated, stifled, trapped, held hostage, or feeling as if the relationship is killing them. Finally, this paper presents treatment challenges in working with more disturbed couples.

scholarly journals On Performance of Two-Parameter Gompertz-Based X¯ Control Charts

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Johnson A. Adewara ◽  
Kayode S. Adekeye ◽  
Olubisi L. Aako
Keyword(s):  
Control Chart ◽  
Coverage Probability ◽  
Control Charts ◽  
Average Run Length ◽  
Real Life ◽  
Correction Method ◽  
Gompertz Distribution ◽  
Real Life Data ◽  
Control Limits ◽  
Two Parameter

In this paper, two methods of control chart were proposed to monitor the process based on the two-parameter Gompertz distribution. The proposed methods are the Gompertz Shewhart approach and Gompertz skewness correction method. A simulation study was conducted to compare the performance of the proposed chart with that of the skewness correction approach for various sample sizes. Furthermore, real-life data on thickness of paint on refrigerators which are nonnormal data that have attributes of a Gompertz distribution were used to illustrate the proposed control chart. The coverage probability (CP), control limit interval (CLI), and average run length (ARL) were used to measure the performance of the two methods. It was found that the Gompertz exact method where the control limits are calculated through the percentiles of the underline distribution has the highest coverage probability, while the Gompertz Shewhart approach and Gompertz skewness correction method have the least CLI and ARL. Hence, the two-parameter Gompertz-based methods would detect out-of-control faster for Gompertz-based X¯ charts.

scholarly journals Fuzzy x- and s Control Charts: A Data-Adaptability and Human-Acceptance Approach

Complexity ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-17 ◽  
Author(s):  
Ming-Hung Shu ◽  
Dinh-Chien Dang ◽  
Thanh-Lam Nguyen ◽  
Bi-Min Hsu ◽  
Ngoc-Son Phan
Keyword(s):  
Surface Roughness ◽  
Control Charts ◽  
Fuzzy Numbers ◽  
Control Surface ◽  
Process Conditions ◽  
Fuzzy Data ◽  
Size Condition ◽  
Resolution Identity ◽  
And Control ◽  
Control Limits

For sequentially monitoring and controlling average and variability of an online manufacturing process, x¯ and s control charts are widely utilized tools, whose constructions require the data to be real (precise) numbers. However, many quality characteristics in practice, such as surface roughness of optical lenses, have been long recorded as fuzzy data, in which the traditional x¯ and s charts have manifested some inaccessibility. Therefore, for well accommodating this fuzzy-data domain, this paper integrates fuzzy set theories to establish the fuzzy charts under a general variable-sample-size condition. First, the resolution-identity principle is exerted to erect the sample-statistics’ and control-limits’ fuzzy numbers (SSFNs and CLFNs), where the sample fuzzy data are unified and aggregated through statistical and nonlinear-programming manipulations. Then, the fuzzy-number ranking approach based on left and right integral index is brought to differentiate magnitude of fuzzy numbers and compare SSFNs and CLFNs pairwise. Thirdly, the fuzzy-logic alike reasoning is enacted to categorize process conditions with intermittent classifications between in control and out of control. Finally, a realistic example to control surface roughness on the turning process in producing optical lenses is illustrated to demonstrate their data-adaptability and human-acceptance of those integrated methodologies under fuzzy-data environments.

scholarly journals Combining Capability Indices and Control Charts in the Process and Analytical Method Control Strategy

2020 ◽  
Author(s):  
Alexis Oliva ◽  
Matías Llabrés
Keyword(s):  
Control Strategy ◽  
Analytical Method ◽  
Control Charts ◽  
Process Capability ◽  
Real Data ◽  
Process Capability Indices ◽  
Specification Limits ◽  
Capability Indices ◽  
And Control ◽  
Control Limits

Different control charts in combination with the process capability indices, Cp, Cpm and Cpk, as part of the control strategy, were evaluated, since both are key elements in determining whether the method or process is reliable for its purpose. All these aspects were analyzed using real data from unitary processes and analytical methods. The traditional x-chart and moving range chart confirmed both analytical method and process are in control and stable and therefore, the process capability indices can be computed. We applied different criteria to establish the specification limits (i.e., analyst/customer requirements) for fixed method or process performance (i.e., process or method requirements). The unitary process does not satisfy the minimum capability requirements for Cp and Cpk indices when the specification limit and control limits are equal in breath. Therefore, the process needs to be revised; especially, a greater control in the process variation is necessary. For the analytical method, the Cpm and Cpk indices were computed. The obtained results were similar in both cases. For example, if the specification limits are set at ±3% of the target value, the method is considered “satisfactory” (1.22<Cpm<1.50) and no further stringent precision control is required.

scholarly journals X̅ and R control charts based on marshall-olkin inverse log-logistic distribution for positive skewed data

2020 ◽  
Vol 1 (1) ◽  
pp. 9-16
Author(s):  
O. L. Aako ◽  
J. A. Adewara ◽  
K. S Adekeye ◽  
E. B. Nkemnole
Keyword(s):  
Control Chart ◽  
Control Charts ◽  
Average Run Length ◽  
Logistic Distribution ◽  
Skewed Data ◽  
Process Data ◽  
And Performance ◽  
Set Up ◽  
Control Limits ◽  
Normally Distributed

The fundamental assumption of variable control charts is that the data are normally distributed and spread randomly about the mean. Process data are not always normally distributed, hence there is need to set up appropriate control charts that gives accurate control limits to monitor processes that are skewed. In this study Shewhart-type control charts for monitoring positively skewed data that are assumed to be from Marshall-Olkin Inverse Loglogistic Distribution (MOILLD) was developed. Average Run Length (ARL) and Control Limits Interval (CLI) were adopted to assess the stability and performance of the MOILLD control chart. The results obtained were compared with Classical Shewhart (CS) and Skewness Correction (SC) control charts using the ARL and CLI. It was discovered that the control charts based on MOILLD performed better and are more stable compare to CS and SC control charts. It is therefore recommended that for positively skewed data, a Marshall-Olkin Inverse Loglogistic Distribution based control chart will be more appropriate.

scholarly journals Evaluasi Kinerja Bagan Kendali Fm Pada Proses Short-Run

2018 ◽  
Vol 17 (1) ◽  
Author(s):  
Darmanto Darmanto
Keyword(s):  
Control Chart ◽  
Control Charts ◽  
Job Shop ◽  
Average Run Length ◽  
Just In Time ◽  
Multivariate Normal ◽  
Sensitivity Level ◽  
Short Run ◽  
Control Limits ◽  
Vector Shift

<p><em>The manufacturing production process that is currently trend is short-run. Short-run process is a job shop and a just in-time. These causes the process parameters to be unknown due to unavailability of data and generally a small amount of product. The control chart is one of the control charts which  designed for the short run. The procedure of the control chart follows the concept of succesive difference and under the assumption of the multivariate Normal distribution. The sensitivity level of a control chart is evaluated based on the average run length (ARL) value. In this study, the ARL value was calculated based on the shift simulation of the average vector by recording the first m-point out of the control limits. The average vector shift simulation of the target () is performed simultaneously with the properties of a positive shift (=+ δ). Variations of data size and many variables in this study were m = 20, 50 and p = 2, 4, 8, respectively. Each scheme (a combination of δ, m and p) is iterated 250,000 times. The simulation results show that for all schemes when both parameters are known ARL<sub>0 </sub>≈ 370. But, when parameters are unknown, ARL<sub>1</sub> turn to smaller. This conclusion also implied when the number of p and n are increased, it reduce the sensitivity of the control chart.</em></p>

Control Charts and Control Limits

2011 ◽  
Vol 112 (3) ◽  
pp. 736-737 ◽  
Author(s):  
Karthik Raghunathan ◽  
Hani Al-Najjar ◽  
Adam Snavely
Keyword(s):  
Control Charts ◽  
And Control ◽  
Control Limits

scholarly journals SAMPLE STANDARD DEVIATION(s) CHART UNDER THE ASSUMPTION OF MODERATENESS AND ITS PERFORMANCE ANALYSIS

2017 ◽  
Vol 5 (6) ◽  
pp. 368-377
Author(s):  
Kalpesh S. Tailor
Keyword(s):  
Standard Deviation ◽  
Performance Analysis ◽  
Normal Distribution ◽  
Control Chart ◽  
Control Charts ◽  
Curve Analysis ◽  
Mean Deviation ◽  
Sample Standard Deviation ◽  
Underlying Distribution ◽  
Control Limits

Moderate distribution proposed by Naik V.D and Desai J.M., is a sound alternative of normal distribution, which has mean and mean deviation as pivotal parameters and which has properties similar to normal distribution. Mean deviation (δ) is a very good alternative of standard deviation (σ) as mean deviation is considered to be the most intuitively and rationally defined measure of dispersion. This fact can be very useful in the field of quality control to construct the control limits of the control charts. On the basis of this fact Naik V.D. and Tailor K.S. have proposed 3δ control limits. In 3δ control limits, the upper and lower control limits are set at 3δ distance from the central line where δ is the mean deviation of sampling distribution of the statistic being used for constructing the control chart. In this paper assuming that the underlying distribution of the variable of interest follows moderate distribution proposed by Naik V.D and Desai J.M, 3δ control limits of sample standard deviation(s) chart are derived. Also the performance analysis of the control chart is carried out with the help of OC curve analysis and ARL curve analysis.

Sign in / Sign up

Export Citation Format

Share Document