scholarly journals Quantitative determination of organic adsorption capacity in the Palaeozoic shales from South China

2021 ◽  
pp. 014459872098303
Author(s):  
Sibo Wang ◽  
Zhiguang Song ◽  
Jia Xia ◽  
Yuan Gao ◽  
YaoPing Wang ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Clear Understanding ◽  
Soluble Organic Matter ◽  
Maximum Increase ◽  
Immature Oil ◽  
Methane Sorption ◽  
Oil Shales ◽  
The Impact ◽  
Total Adsorption

In this study, the methane adsorption capacity of kerogen isolated from the Cambrian, Silurian, and Permian shales and the impact of soluble organic matter (SOM) on the adsorption capacity of these shales were investigated. The results reveal that 1) the adsorption capacity of kerogen varies in a broad range, from 14.48 to 23.22 cm3/g for the Cambrian kerogens, from 15.50 to 36.06 cm3/g for the Silurian kerogens, and from 10.71 to 11.15 cm3/g for the Permian kerogens; 2) the kerogen adsorption accounts for 33.67–70.23% of the total adsorption capacity of these Palaeozoic extracted shales, demonstrating that kerogen is the primary adsorbing substance in shales; 3) the adsorption isotherms of kerogen in highly mature Cambrian and Silurian shales are similar to those of Triassic coal, while the isotherms of kerogen in the relatively immature Permian shales are similar to those of the immature oil shales; and 4) the SOM demonstrates a significant impact on the adsorption capacity of shales as the removal of SOM can cause a maximum increase of 34.29% or a decrease of 23.36% in the total adsorption capacity of shales. However, there is no clear understanding of the impact of SOM on the methane sorption of shales.

Assessment of sensitivity of the efficiency of regional tax spending towards investment attractiveness of the types of economic activity carried out by the residents of advanced development territory

2020 ◽  
pp. 98-110
Author(s):  
Evgeniya Mikhailovna Popova ◽  
Guzel Mukhtarovna Guseinova ◽  
Sergei Borisovich Milov
Keyword(s):  
Economic Activity ◽  
Socioeconomic Development ◽  
Federal District ◽  
Tax Incentives ◽  
Capital Investments ◽  
The Subject ◽  
Investment Process ◽  
The Impact ◽  
Advanced Development

The deficit of subnational budgets and deceleration capital investments in multiple Russian regions increase the relevance of research aimed at improvement of tax incentivizing practice of the regional investment process. The studies focused on determination of the impact of socioeconomic and institutional factors upon the efficiency of investment tax expenses obtained wide circulation within the foreign scientific literature. The subject of this article is the assessment of sensitivity of the efficiency of regional tax expanses towards investment attractiveness of the types of economic activity carried out by the residents of territories of advanced socioeconomic development, created in the subjects of Far Easter Federal District. The scientific novelty and practical values of this research consists in substantiation of the reasonableness of assessment of investment attractiveness of the types of economic activity that are stimulated by tax incentives. Methodology for assessing investment attractiveness is proposed and tested. The conclusion is made that in case of low investment attractiveness of the type of economic activity, which was planned to support by tax incentives, it is required to conduct and additional analysis to avoid unjustified tax expanses.

Method development for the determination of textural properties of sugar beet roots

2019 ◽  
pp. 392-400 ◽  
Author(s):  
Gunnar Kleuker ◽  
Christa M. Hoffmann
Keyword(s):  
Sugar Beet ◽  
Compression Test ◽  
Storage Period ◽  
Textural Properties ◽  
Small Sample ◽  
Root Tip ◽  
Flexural Test ◽  
Sample Distribution ◽  
The Impact

The harvest of sugar beet leads to root tip breakage and surface damage through mechanical impacts, which increase storage losses. For the determination of textural properties of sugar beet roots with a texture analyzer a reliable method description is missing. This study aimed to evaluate the impact of washing, soil tare, storage period from washing until measurement, sample distribution and number of roots on puncture and compression measurements. For this purpose, in 2017 comprehensive tests were conducted with sugar beet roots grown in a greenhouse. In a second step these tests were carried out with different Beta varieties from a field trial, and in addition, a flexural test was included. Results show that the storage period after washing and the sample distribution had an influence on the puncture and compression strength. It is suggested to wash the roots by hand before the measurement and to determine the strength no later than 48 h after washing. For reliable and comparable results a radial distribution of measurement points around the widest circumference of the root is recommended for the puncture test. The sample position of the compression test had an influence on the compressive strength and therefore, needs to be clearly defined. For the puncture and the compression test it was possible to achieve stable results with a small sample size, but with increasing heterogeneity of the plant stand a higher number of roots is required. The flexural test showed a high variability and is, therefore, not recommended for the analysis of sugar beet textural properties.

Development and Validation of an LC-MS/MS Method for Simultaneous Determination of Canagliflozin and Metformin HCl in Rat Plasma and its Application

2020 ◽  
Vol 16 (6) ◽  
pp. 752-762
Author(s):  
Vivek Nalawade ◽  
Vaibhav A. Dixit ◽  
Amisha Vora ◽  
Himashu Zade
Keyword(s):  
Internal Standard ◽  
Rat Plasma ◽  
Precipitation Method ◽  
Herbal Extracts ◽  
One Step ◽  
Precision And Accuracy ◽  
Development And Validation ◽  
The Impact ◽  
Metformin Hcl

Background: Food and herbal extracts rich in Quercetin (QRT) are often self-medicated by diabetics and can potentially alter the pharmacokinetics (PK) of Metformin HCl (MET) and Canagliflozin (CNG) leading to food or herb-drug interactions and reduced therapeutic efficacy. However, the impact of these flavonoids on the pharmacokinetic behaviour of MET and CNG is mostly unknown. Methods: A simple one-step protein precipitation method was developed for the determination of MET and CNG from rat plasma. The mobile phase chosen was MeOH 65% and 35% water containing 0.1% formic acid at a flow rate of 1mL/min. Results: The retention time of MET, internal standard (Valsartan) and CNG was 1.83, 6.2 and 8.2 min, respectively. The method was found to be linear in the range of 200 - 8000 ng/mL for CNG and 100 = 4000 ng/ml for MET. Precision and accuracy of the method were below 20% at LLOQ and below 15% for LQC, MQC, and HQC. Conclusion: The method was successfully applied for the determination of PK of MET and CNG by using 100 μL of rat plasma. QRT co-administration affects the PK parameters of MET and CNG. This alteration in PK parameters might be of significant use for clinicians and patients.

The Microeconomics of Product Innovation

2018 ◽  
Author(s):  
Paul Stoneman ◽  
Eleonora Bartoloni ◽  
Maurizio Baussola
Keyword(s):  
Product Innovation ◽  
New Products ◽  
Goods And Services ◽  
Product Innovations ◽  
Microeconomic Analysis ◽  
Prime Objective ◽  
Price Measurement ◽  
The Impact

The prime objective of this book is the use microeconomic analysis to guide and provide insight into the generation and adoption of new products. Taking an approach that uses minimal formal mathematics, the volume initially addresses questions of definitions, sources, and extent of product innovation, differentiating between goods and services; hard and soft innovations; horizontal and vertical innovations; original, new to market, and new to firm innovations. The sources of product innovations (e.g. R&D, design, and creativity) are explored empirically, and the extent of such innovations is then pursued using survey and other data. Three chapters are devoted to the theoretical analysis of the demand for and supply of new products and to the determination of firms’ decisions to undertake product innovation. Later chapters encompass empirical evidence on the determination of the extent of product innovation, the diffusion of such innovation, the impact of product innovation on firm performance, price measurement, and welfare, while the final chapter addresses policy issues.

Sign in / Sign up

Export Citation Format

Share Document