Vibrational behavior of beams made of functionally graded materials by using a mixed formulation

2020 ◽  
Vol 234 (18) ◽  
pp. 3650-3666 ◽  
Author(s):  
Souhir Zghal ◽  
Fakhreddine Dammak
Keyword(s):  
Functionally Graded Materials ◽  
Power Law ◽  
Transverse Shear ◽  
Volume Fraction ◽  
Functionally Graded ◽  
Mixed Formulation ◽  
Shear Stresses ◽  
Power Law Distribution ◽  
Graded Materials ◽  
Vibrational Behavior

This paper investigates the vibrational behavior of beams made of functionally graded materials using a mixed formulation. Unlike the other high order shear deformation theories (HSDTs), the proposed formulation is elaborated within a double field of displacements and stresses which offers the possibility of the development of low order linear elements with enhanced accuracy. As well as, the effect of the transverse shear strains and the zero condition of the transverse shear stresses on the top and bottom surfaces are verified. The material characteristics of the beams are described via a power law distribution in order to take into account the continuous variation of the volume fraction of its constituents along the thickness direction. Numerical simulations are conducted to show the influence of power law index, slenderness ratios, and boundary conditions on natural frequencies of functionally graded beams. Results demonstrate the efficiency and the applicability of the model based on a refined mixed formulation and its ability to predict the vibrational behavior of functionally graded beams with good accuracy.

scholarly journals Vibration and Buckling Analysis of Cylindrical Shells Made of Functionally Graded Materials under Combined Static and Periodic Axial Forces

2010 ◽  
Vol 19 (2) ◽  
pp. 096369351001900 ◽  
Author(s):  
F. Ebrahimi ◽  
H.A. Sepiani
Keyword(s):  
Transverse Shear ◽  
Volume Fraction ◽  
Cylindrical Shells ◽  
Shear Deformation Theory ◽  
Deformation Mode ◽  
Functionally Graded ◽  
Power Law Distribution ◽  
Graded Materials ◽  
Axial Forces ◽  
Graded Material

In this study, a formulation for the free vibration and buckling of cylindrical shells made of functionally graded material (FGM) subjected to combined static and periodic axial loadings are presented. The properties are temperature dependent and graded in the thickness direction according to a volume fraction power law distribution. The analysis is based on two different methods of first-order shear deformation theory (FSDT) considering the transverse shear strains and the rotary inertias and the classical shell theory (CST). The results obtained show that the effect of transverse shear and rotary inertias on vibration and buckling of functionally graded cylindrical shells is dependent on the material composition, the temperature environment, the amplitude of static load, the deformation mode, and the shell geometry parameters.

Three-Dimensional Flexure of Rectangular Plates Made of Functionally Graded Materials

2005 ◽  
Vol 72 (5) ◽  
pp. 788-791 ◽  
Author(s):  
Isaac Elishakoff ◽  
Cristina Gentilini
Keyword(s):  
Functionally Graded Materials ◽  
Power Law ◽  
Minimum Energy ◽  
Three Dimensional ◽  
Functionally Graded ◽  
Rectangular Plates ◽  
Power Law Distribution ◽  
Dimensional Solution ◽  
Energy Principle ◽  
Graded Materials

A three-dimensional solution for the problem of transversely loaded, all-round clamped rectangular plates of arbitrary thickness is presented within the linear, small deformation theory of elasticity. The Ritz minimum energy principle is employed to derive the governing equation of the plate made of functionally graded materials. In theory, if we employ an infinite number of terms in the displacement series, the exact solution can be determined. However, a practical limit always exists due to numerical implementation. The solution has a validity comparable to some higher order theories. A power-law distribution for the mechanical characteristics is adopted to model the continuous variation of properties from those of one component to those of the other. The displacements and stresses of the plate for different values of the power-law exponent are investigated.

scholarly journals An exponential-trigonometric higher order shear deformation theory (HSDT) for bending, free vibration, and buckling analysis of functionally graded materials (FGMs) plates

2020 ◽  
Vol 29 ◽  
pp. 096369351987573 ◽  
Author(s):  
Yamna Belkhodja ◽  
Djamel Ouinas ◽  
Fatima Zohra Zaoui ◽  
Hamida Fekirini
Keyword(s):  
Free Vibration ◽  
Shear Deformation ◽  
Functionally Graded Materials ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Higher Order ◽  
Functionally Graded ◽  
Shear Stresses ◽  
Graded Materials

Two assumptions have been made based on by this proposed theory, which come from recently developed exponential–trigonometric shape function for transverse shear deformation effect and a simple higher order shear deformation theory for plate, based on a constraint between two rotational displacements of axis parallel to the plate midplane, about the axes x, y Cartesian coordinates system, which caused fewer unknown number. For the application of this method, a displacement field extended as only bending membrane for transverse displacement is used, a governing equations of motion as a result are determined according to Hamilton’s principle, and simplified using Navier analytical solutions, as well as the transverse shear stresses effect that satisfied the stress-free boundary conditions on the simply supported plate free faces as a parabolic variation along the thickness are taken into account. A functionally graded materials plates are chosen for the parametric study, where the plates are functionally graded continuously in materials through the plate thickness as a function of power law or exponential form. The aim of this study is to analyze the bending, free vibration as well as the buckling mechanical behaviors, where the results are more focused on the investigation of different parameters such as the volume fraction index, geometric ratios, frequency modes, in-plane compressive load parameters and material properties effects on the deflection, stresses, natural frequencies, and critical buckling load, which are validated in terms of accuracy and efficiency with other plate theories results found in the literature.

scholarly journals Dynamic stability of functionally graded plate under in-plane compression

2005 ◽  
Vol 2005 (4) ◽  
pp. 411-424 ◽  
Author(s):  
Andrzej Tylikowski
Keyword(s):  
Asymptotic Stability ◽  
Power Law ◽  
Volume Fraction ◽  
Direct Method ◽  
Functionally Graded ◽  
Time Dependent ◽  
Power Law Distribution ◽  
Graded Materials ◽  
Plane State ◽  
The Stability

Functionally graded materials have gained considerable attention in the high-temperature applications. A study of parametric vibrations of functionally graded plates subjected to in-plane time-dependent forces is presented. Moderately large deflection equations taking into account a coupling of in-plane and transverse motions are used. Material properties are graded in the thickness direction of the plate according to volume fraction power law distribution. An oscillating temperature causes generation of in-plane time-dependent forces destabilizing the plane state of the plate equilibrium. The asymptotic stability and almost-sure asymptotic stability criteria involving a damping coefficient and loading parameters are derived using Liapunov's direct method. Effects of power law exponent on the stability domains are studied.

Deformation Modeling of an FGM Plate under External Force

2012 ◽  
Vol 622-623 ◽  
pp. 246-253
Author(s):  
A.R. Mortazavi Moghaddam ◽  
M.T. Ahmadian ◽  
M. Sarkeshi ◽  
A. Kheradpisheh
Keyword(s):  
Material Property ◽  
Power Law ◽  
Volume Fraction ◽  
Infinite Plate ◽  
Functionally Graded ◽  
Power Law Distribution ◽  
Graded Materials ◽  
Plate Deformation ◽  
Deformation Response ◽  
Number Of Layers

Deformation modeling of an infinite plate of functionally graded materials (FGMs) loaded by normal force to the plate surface is studied. The material properties of FGM plate are assumed to be graded in the thickness direction according to a simple power-law distribution in terms of the volume fractions of the constituents. The governing equations are based on stress-strain relation and the equilibrium force equation. Keeping generality, FGM plate has been assumed as a multilayer with linear material property in each layer while arbitrary exponential material property through the thickness. A plate made of Aluminum and Alumina is considered as an example to illustrate the effects of the volume fraction exponent and number of layers on the plate deformation response. Effects of number of layers on the accuracy of the plate behavior under external load are examined. Results indicate that at every certain power-law (M), there exist a number of layers beyond which no variation can be detected on the plate deformation response.

Solidification Processing of Functionally Graded Materials by Sedimentation

1999 ◽  
Author(s):  
J. W. Gao ◽  
S. J. White ◽  
C. Y. Wang
Keyword(s):  
Functionally Graded Materials ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Computer Code ◽  
Functionally Graded ◽  
Particle Volume ◽  
Particle Sedimentation ◽  
Graded Materials ◽  
Free Zone ◽  
Free Region

Abstract A combined experimental and numerical investigation of the solidification process during gravity casting of functionally graded materials (FGMs) is conducted. Focus is placed on the interplay between the freezing front propagation and particle sedimentation. Experiments were performed in a rectangular ingot using pure substances as the matrix and glass beads as the particle phase. The time evolutions of local particle volume fractions were measured by bifurcated fiber optical probes working in the reflection mode. The effects of various processing parameters were explored. It is found that there exists a particle-free zone in the top portion of the solidified ingot, followed by a graded particle distribution region towards the bottom. Higher superheat results in slower solidification and hence a thicker particle-free zone and a higher particle concentration near the bottom. The higher initial particle volume fraction leads to a thinner particle-free region. Lower cooling temperatures suppress particle settling. A one-dimensional solidification model was also developed, and the model equations were solved numerically using a fixed-grid, finite-volume method. The model was then validated against the experimental results, and the validated computer code was used as a tool for efficient computational prototyping of an Al/SiC FGM.

Designing Optimal Volume Fractions For Functionally Graded Materials With Temperature-Dependent Material Properties

2006 ◽  
Vol 74 (5) ◽  
pp. 861-874 ◽  
Author(s):  
Florin Bobaru
Keyword(s):  
Functionally Graded Materials ◽  
Material Properties ◽  
Volume Fraction ◽  
Effective Properties ◽  
Functionally Graded ◽  
Dominant Factor ◽  
Temperature Dependent ◽  
Graded Materials ◽  
Critical Stresses ◽  
Non Linear

We present a numerical approach for material optimization of metal-ceramic functionally graded materials (FGMs) with temperature-dependent material properties. We solve the non-linear heterogeneous thermoelasticity equations in 2D under plane strain conditions and consider examples in which the material composition varies along the radial direction of a hollow cylinder under thermomechanical loading. A space of shape-preserving splines is used to search for the optimal volume fraction function which minimizes stresses or minimizes mass under stress constraints. The control points (design variables) that define the volume fraction spline function are independent of the grid used in the numerical solution of the thermoelastic problem. We introduce new temperature-dependent objective functions and constraints. The rule of mixture and the modified Mori-Tanaka with the fuzzy inference scheme are used to compute effective properties for the material mixtures. The different micromechanics models lead to optimal solutions that are similar qualitatively. To compute the temperature-dependent critical stresses for the mixture, we use, for lack of experimental data, the rule-of-mixture. When a scalar stress measure is minimized, we obtain optimal volume fraction functions that feature multiple graded regions alternating with non-graded layers, or even non-monotonic profiles. The dominant factor for the existence of such local minimizers is the non-linear dependence of the critical stresses of the ceramic component on temperature. These results show that, in certain cases, using power-law type functions to represent the material gradation in FGMs is too restrictive.

scholarly journals An Efficient Beam Element Based on Quasi-3D Theory for Static Bending Analysis of Functionally Graded Beams

Materials ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2198 ◽  
Author(s):  
Hoang Nam Nguyen ◽  
Tran Thi Hong ◽  
Pham Van Vinh ◽  
Do Van Thom
Keyword(s):  
Transverse Shear ◽  
Volume Fraction ◽  
Beam Theory ◽  
Beam Element ◽  
Functionally Graded ◽  
Shear Stresses ◽  
Functionally Graded Beam ◽  
Transverse Shear Stresses ◽  
Power Law Index ◽  
Transverse Shear Strains

In this paper, a 2-node beam element is developed based on Quasi-3D beam theory and mixed formulation for static bending of functionally graded (FG) beams. The transverse shear strains and stresses of the proposed beam element are parabolic distributions through the thickness of the beam and the transverse shear stresses on the top and bottom surfaces of the beam vanish. The proposed beam element is free of shear-looking without selective or reduced integration. The material properties of the functionally graded beam are assumed to vary according to the power-law index of the volume fraction of the constituents through the thickness of the beam. The numerical results of this study are compared with published results to illustrate the accuracy and convenience rate of the new beam element. The influence of some parametrics on the bending behavior of FGM beams is investigated.

Sign in / Sign up

Export Citation Format

Share Document