Research and analysis of the wheeled vehicle load spectrum editing method based on short-time Fourier transform

2019 ◽  
Vol 233 (14) ◽  
pp. 3671-3683
Author(s):  
Zongkai Liu ◽  
Chuan Peng ◽  
Xiaoqiang Yang
Keyword(s):  
Fourier Transform ◽  
Frequency Domain ◽  
Fatigue Damage ◽  
Time Domain ◽  
Short Time Fourier Transform ◽  
Load Spectrum ◽  
Statistical Parameters ◽  
Original Spectrum ◽  
The Time Domain ◽  
Short Time

The measured uniaxial-head load spectrum in the road simulation test has a large number of useless small loads. When applying the measured load spectrum directly, it will take a lot of time. This paper designs a comprehensive road spectrum measurement system to collect data and proposes a method for editing the uniaxial-head acceleration load spectrum using short-time Fourier transform to speed up the reliability test process and reduce time costs. In this method, the time domain and frequency domain information of the signal is obtained by short-time Fourier transform. The concept of accumulated power spectral density is proposed to identify the reduced load data, and the relative fatigue damage is used as the pass criterion. The length of the edited spectrum is only 66% of the original spectrum through the above-mentioned editing method and retains the relative damage amount of 91%. Finally, through the analysis of time domain, frequency domain, and fatigue statistical parameters, it demonstrates that the short-time Fourier transform–based acceleration load spectrum edition method could achieve a similar fatigue damage to the original spectrum in a shorter time.

JOINT INTERPRETATION OF AIRBORNE ELECTROMAGNETIC DATA IN THE TIME DOMAIN AND FREQUENCY DOMAIN

2018 ◽  
Vol 12 (7-8) ◽  
pp. 76-83
Author(s):  
E. V. KARSHAKOV ◽  
J. MOILANEN
Keyword(s):  
Fourier Transform ◽  
Frequency Domain ◽  
Time Domain ◽  
Frequency Interval ◽  
Single Spectrum ◽  
Simultaneous Inversion ◽  
Homogeneous Half Space ◽  
Time Domain Data ◽  
The Time Domain

Тhe advantage of combine processing of frequency domain and time domain data provided by the EQUATOR system is discussed. The heliborne complex has a towed transmitter, and, raised above it on the same cable a towed receiver. The excitation signal contains both pulsed and harmonic components. In fact, there are two independent transmitters operate in the system: one of them is a normal pulsed domain transmitter, with a half-sinusoidal pulse and a small "cut" on the falling edge, and the other one is a classical frequency domain transmitter at several specially selected frequencies. The received signal is first processed to a direct Fourier transform with high Q-factor detection at all significant frequencies. After that, in the spectral region, operations of converting the spectra of two sounding signals to a single spectrum of an ideal transmitter are performed. Than we do an inverse Fourier transform and return to the time domain. The detection of spectral components is done at a frequency band of several Hz, the receiver has the ability to perfectly suppress all sorts of extra-band noise. The detection bandwidth is several dozen times less the frequency interval between the harmonics, it turns out thatto achieve the same measurement quality of ground response without using out-of-band suppression you need several dozen times higher moment of airborne transmitting system. The data obtained from the model of a homogeneous half-space, a two-layered model, and a model of a horizontally layered medium is considered. A time-domain data makes it easier to detect a conductor in a relative insulator at greater depths. The data in the frequency domain gives more detailed information about subsurface. These conclusions are illustrated by the example of processing the survey data of the Republic of Rwanda in 2017. The simultaneous inversion of data in frequency domain and time domain can significantly improve the quality of interpretation.

scholarly journals Ultrasonic Assessment of Thickness and Bonding Quality of Coating Layer Based on Short-Time Fourier Transform and Convolutional Neural Networks

Coatings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 909
Author(s):  
Azamatjon Kakhramon ugli Malikov ◽  
Younho Cho ◽  
Young H. Kim ◽  
Jeongnam Kim ◽  
Junpil Park ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Coating Layer ◽  
Ultrasonic Pulse ◽  
Short Time Fourier Transform ◽  
Coating Materials ◽  
Time Frequency ◽  
High Attenuation ◽  
Bonding State ◽  
The Time Domain ◽  
Short Time

Ultrasonic non-destructive analysis is a promising and effective method for the inspection of protective coating materials. Offshore coating exhibits a high attenuation rate of ultrasonic energy due to the absorption and ultrasonic pulse echo testing becomes difficult due to the small amplitude of the second echo from the back wall of the coating layer. In order to address these problems, an advanced ultrasonic signal analysis has been proposed. An ultrasonic delay line was applied due to the high attenuation of the coating layer. A short-time Fourier transform (STFT) of the waveform was implemented to measure the thickness and state of bonding of coating materials. The thickness of the coating material was estimated by the projection of the STFT into the time-domain. The bonding and debonding of the coating layers were distinguished using the ratio of the STFT magnitude peaks of the two subsequent wave echoes. In addition, the advantage of the STFT-based approach is that it can accurately and quickly estimate the time of flight (TOF) of a signal even at low signal-to-noise ratios. Finally, a convolutional neural network (CNN) was applied to automatically determine the bonding state of the coatings. The time–frequency representation of the waveform was used as the input to the CNN. The experimental results demonstrated that the proposed method automatically determines the bonding state of the coatings with high accuracy. The present approach is more efficient compared to the method of estimating bonding state using attenuation.

IDENTIFICATION OF INTERHARMONICS BASED ON WAVELET PACKET TRANSFORM

2021 ◽  
Vol 3 (1) ◽  
pp. 031-036
Author(s):  
S. A. GOROVOY ◽  
◽  
V. I. SKOROKHODOV ◽  
D. I. PLOTNIKOV ◽  
◽  
...  
Keyword(s):  
Fourier Transform ◽  
Simulation Model ◽  
Frequency Domain ◽  
Time Domain ◽  
Wavelet Packet ◽  
High Accuracy ◽  
Wavelet Packet Transform ◽  
Mathematical Apparatus ◽  
Nonlinear Load ◽  
The Time Domain

This paper deals with the analysis of interharmonics, which are due to the presence of a nonlinear load. The tool for the analysis was a mathematical apparatus - wavelet packet transform. Which has a number of advantages over the traditional Fourier transform. A simulation model was developed in Simulink to simulate a non-stationary non-sinusoidal mode. The use of the wavelet packet transform will allow to determine the mode parameters with high accuracy from the obtained wavelet coefficients. It also makes it possible to obtain information, both in the frequency domain of the signal and in the time domain.

scholarly journals Radiofrequency Microwave Double Resonance Experiments in Fourier Transform Technique

1988 ◽  
Vol 43 (3) ◽  
pp. 280-282 ◽  
Author(s):  
N. Heineking ◽  
W. Stahl ◽  
H. Dreizler
Keyword(s):  
Fourier Transform ◽  
Frequency Domain ◽  
Time Domain ◽  
Double Resonance ◽  
Fourier Transform Spectroscopy ◽  
Microwave Spectroscopy ◽  
Valuable Method ◽  
The Time Domain

Abstract Radiofrequency microwave double resonance has proved as a valuable method in microwave spectroscopy in the frequency domain. We present comparable experiments in the time domain Fourier transform spectroscopy.

scholarly journals The Comparison of the Effect of Haimming Window and Blackman Window in the Time-Scaling and Pitch-Shifting Algorithms

2011 ◽  
Vol 1 ◽  
pp. 221-225
Author(s):  
Zhi Wei Lin ◽  
Li Da ◽  
Hao Wang ◽  
Wei Han ◽  
Fan Lin
Keyword(s):  
Fourier Transform ◽  
Frequency Domain ◽  
Time Domain ◽  
Frequency Domain Method ◽  
Domain Type ◽  
Domain Method ◽  
Time Scaling ◽  
Window Functions ◽  
Inherent Frequency ◽  
The Time Domain

The real-time pitch shifting process is widely used in various types of music production. The pitch shifting technology can be divided into two major types, the time domain type and the frequency domain type. Compared with the time domain method, the frequency domain method has the advantage of large shifting scale, low total cost of computing and the more flexibility of the algorithm. However, the use of Fourier Transform in frequency domain processing leads to the inevitable inherent frequency leakage effects which decrease the accuracy of the pitch shifting effect. In order to restrain the side effect of Fourier Transform, window functions are used to fall down the spectrum-aliasing. In practical processing, Haimming Window and Blackman Window are frequently used. In this paper, we compare both the effect of the two window functions in the restraint of frequency leakage and the performance and accuracy in subjective based on the traditional phase vocoder[1]. Experiment shows that Haimming Window is generally better than Blackman Window in pitch shifting process.

scholarly journals Application of the Acoustic Emission Method for Diagnosis of On-Load Tap Changer

2017 ◽  
Vol 42 (1) ◽  
pp. 29-35 ◽  
Author(s):  
Henryk Majchrzak ◽  
Andrzej Cichoń ◽  
Sebastian Borucki
Keyword(s):  
Acoustic Emission ◽  
Frequency Domain ◽  
Time Domain ◽  
Operating Conditions ◽  
Time Frequency ◽  
Measurement Results ◽  
Tap Changer ◽  
The Time Domain ◽  
Load Tap Changer ◽  
Short Time

Abstract This paper provides an example of the application of the acoustic emission (AE) method for the diagnosis of technical conditions of a three-phase on-load tap-changer (OLTC) GIII type. The measurements were performed for an amount of 10 items of OLTCs, installed in power transformers with a capacity of 250 MVA. The study was conducted in two different OLTC operating conditions during the tapping process: under load and free running conditions. The analysis of the measurement results was made in both time domain and time-frequency domain. The description of the AE signals generated by the OLTC in the time domain was performed using the analysis of waveforms and determined characteristic times. Within the time-frequency domain the measured signals were described by short-time Fourier transform spectrograms.

scholarly journals Study of Blockage Diagnosis for Hydrocyclone Using Vibration-Based Technique Based on Wavelet Denoising and Discrete-Time Fourier Transform Method

Processes ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 440 ◽  
Author(s):  
Guanghui Wang ◽  
Qun Liu ◽  
Chuanzhen Wang ◽  
Lulu Dong ◽  
Dan Dai ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Standard Deviation ◽  
Frequency Domain ◽  
Discrete Time ◽  
Time Domain ◽  
Wavelet Denoising ◽  
Transform Method ◽  
Fourier Transform Method ◽  
The Time Domain ◽  
Separation Devices

Hydrocyclones are extensively known as important separation devices which are used in many industrial fields. However, the general method to estimate device performance is time-consuming and has a high cost. The aim of this paper was to investigate the blockage diagnosis for a lab-scale hydrocyclone using a vibration-based technique based on wavelet denoising and the discrete-time Fourier transform method. The results indicate that the farther away the installation location from feed inlet the more regular the frequency is, which reveals that the installation plane near to the spigot generated the regular frequency distribution. Furthermore, the acceleration amplitude under blockage degrees 0%, 50% and 100% fluctuates as a sine shape with increasing time, meanwhile the vibration frequency of the hydrocyclone rises with increasing throughput. Moreover, the distribution of four dimensional and five non-dimensional parameters for the time domain shows that the standard deviation, compared to the others, reduced gradually with increases in blockage degree. Thus, the standard deviation was used to evaluate the online diagnosis of the blockage. The frequency domain distribution under different throughput reveals that the characteristic peaks consisting of the faulty frequency and multiple frequency were produced by the faulty blockage and the feed pump, respectively. Hence, the faulty peak of 16–17 Hz was adopted to judge the real-time blockage of the hydrocyclone, i.e., the presence of the characteristic peak marks the blockage, and its value is proportional to the blockage degree. The application of the online monitoring system demonstrates that the combination of the time domain and the frequency domain could admirably detect the running state and rapidly recognize blockage faults.

Short Time Fourier Transform Analysis of Multi-Component Nonstationary Acoustic Signal

2011 ◽  
Vol 403-408 ◽  
pp. 3163-3165 ◽  
Author(s):  
Zhi Bin Gao
Keyword(s):  
Fourier Transform ◽  
Frequency Analysis ◽  
Time Domain ◽  
Frequency Characteristic ◽  
Acoustic Signal ◽  
Short Time Fourier Transform ◽  
Characteristic Parameters ◽  
Time Frequency ◽  
Analysis Technique ◽  
Short Time

In order to extract major components of signal, multi-component nonstationary acoustic signal was analyzed with time-frequency analysis technique. By transforming multi-component nonstationary acoustic signal from time domain to time-frequency domain with short time Fourier transform, major components were determined according to spectrogram. Results show that major components and its time-frequency characteristic parameters can be extracted exactly. Short time Fourier transform is an effective method for extracting major components of nonstationary acoustic signal.

Sign in / Sign up

Export Citation Format

Share Document