Rational loads of turbine inlet air absorption-ejector cooling systems

2021 ◽  
pp. 095765092110454
Author(s):  
Mykola Radchenko ◽  
Andrii Radchenko ◽  
Roman Radchenko ◽  
Serhiy Kantor ◽  
Dmytro Konovalov ◽  
...  
Keyword(s):  
Rational Design ◽  
Methodological Approach ◽  
Climatic Conditions ◽  
Temperate Climate ◽  
Air Cooling ◽  
Universal Method ◽  
Fuel Saving ◽  
Absorption Chiller ◽  
Turbine Inlet ◽  
Refrigeration Capacity

An increase in gas turbine efficiency is possible by inlet air cooling in chillers converting a heat of exhaust gas into refrigeration. In traditional absorption lithium-bromide chillers of a simple cycle an inlet air can be cooled to 15°С. More decrease of turbine inlet air temperature and greater fuel saving accordingly is possible in refrigerant ejector chiller as a simple in design and cheap. The innovative turbine inlet air cooling (TIC) system with absorption chiller as a high-temperature and ejector chiller as a low-temperature stages for cooling air to 7 or 10 °C is proposed. Its application in temperate climate provides annual fuel saving by 1.5 to 2 times higher compared with traditional air cooling in absorption chiller to 15 °C. A novel universal method of analysing the efficiency of TIC system operation and rational designing has been developed. The method involves the simple numerical simulation based on real input data of site actual climatic conditions. The annual fuel saving is chosen as a primary criterion. The novelty of the methodological approach consists in replacing the current yearly changeable fuel reduction due to TIC by its hour-by-hour summation as an annual fuel saving. The increment of annual fuel saving referred to needed refrigeration capacity of TIC system is used as an indicator to select a design refrigeration capacity. A rational design refrigeration capacity determined by applying the novel methodology allows to decrease the TIC system sizes by 10 to 20% compared with traditional designing issuing from the peaked thermal load during a year. So far as it was developed analytically by introducing quite reasonable criterion indicator and based on the simple summation procedure the method is quite applicable for designing in power and energy.

Gas turbine intake air cooling systems of combined type and their optimum designing

2020 ◽  
Vol 5 (2) ◽  
pp. 3-24
Author(s):  
Andrii M. Radchenko ◽  
Keyword(s):  
Low Temperature ◽  
Lithium Bromide ◽  
Climatic Conditions ◽  
Temperate Climate ◽  
Air Cooling ◽  
Fuel Saving ◽  
Cooling Systems ◽  
Exhaust Heat ◽  
Refrigeration Capacity ◽  
Cooling Air

Turbine intake air cooling (TIAC) by absorption lithium-bromide chillers (ACh) utilizing the exhaust heat is considered as the most effective fuel saving technology for temperate climatic conditions. But the cooling potential of TIAC systems based on ACh of a simple cycle is limited by a comparatively increased chilled water temperature of about 7°C excluding cooling intake air lower than 15°C. The application of a refrigerant as a coolant enables deeper cooling intake air to 10°C and lower. The application of two-stage hybrid absorption-ejector chillers (AECh) with a refrigerant ejector chiller (ECh) as a low temperature stage makes it possible to increase the annual fuel saving approximately twice in temperate climate due to deeper cooling air as compared with ACh. Furthermore, this effect can be achieved with the sizes of TIAC system reduced by about 20 % due to determining the rational refrigeration capacity of AECh providing practically maximum annual fuel saving increment and the use of the current excessive refrigeration capacities to cover peaked loads.

scholarly journals Gas turbine unite inlet air cooling by using an excessive refrigeration capacity of absorption-ejector chiller in booster air cooler

2018 ◽  
Vol 70 ◽  
pp. 03012 ◽  
Author(s):  
Roman Radchenko ◽  
Andrii Radchenko ◽  
Serhiy Serbin ◽  
Serhiy Kantor ◽  
Bohdan Portnoi
Keyword(s):  
Gas Turbine ◽  
Cooling System ◽  
Ambient Air ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Air Cooling ◽  
Two Stage ◽  
Air Cooler ◽  
Refrigeration Capacity ◽  
Heat Loads

Two-stage Gas turbine unite (GTU) inlet air cooling by absorption lithium-bromide chiller (ACh) to the temperature 15 °C and by refrigerant ejector chiller (ECh) to 10 °C through utilizing the turbine exhaust gas heat for changeable ambient air temperatures and corresponding heat loads on the air coolers for the south Ukraine climatic conditions is analysed. An excessive refrigeration capacity of combined absorption-ejector chiller (AECh) exceeding the current heat loads and generated at decreased heat loads on the air coolers at the inlet of GTU can be used for covering increased heat loads to reduce the refrigeration capacity of AECh. The GTU inlet air cooling system with an ambient air precooling booster stage and a base two-stage cooling air to the temperature 10 °C by AECh is proposed. The AECh excessive cooling capacity generated during decreased heat loads on the GTU inlet air coolers is conserved in the thermal accumulator and used for GTU inlet air precooling in a booster stage of air cooler during increased heat loads. There is AECh cooling capacity reduction by 50% due to the use of a booster stage for precooling GTU inlet ambient air at the expense of an excessive cooling capacity accumulated in the thermal storage.

scholarly journals МЕТОДОЛОГИЧЕСКИЙ ПОДХОД К ЭНЕРГОСБЕРЕГАЮЩЕМУ ХЛАДОСНАБЖЕНИЮ СИСТЕМ КОНДИЦИОНИРОВАНИЯ ВОЗДУХА АДАПТАЦИЕЙ К ТЕКУЩИМ КЛИМАТИЧЕСКИМ УСЛОВИЯМ

2018 ◽  
pp. 58-62
Author(s):  
Євген Іванович Трушляков
Keyword(s):  
Heat Load ◽  
Methodological Approach ◽  
Ambient Air ◽  
High Energy ◽  
Climatic Conditions ◽  
Refrigeration Capacity ◽  
The Difference ◽  
Heat Loads ◽  
Refrigeration Machine ◽  
Current Heat

The methodological approach was suggested to define a rational heat load of the air conditioning system (ACS) with taking into consideration the current climatic conditions of operation. The proposed approach is based on the hypothesis of sharing the current changeable heat load on the relatively stable share as the basic one for choosing installed (designed) refrigeration capacity of the refrigeration machine, operating with high energy efficiency in nominal or similar modes, and unstable heat load, corresponding to ambient air precooling at changeable current temperatures. To prove the methodological approach to defining a rational heat load of the ACS was carried out the analysis of current values of heat loads of the refrigeration machine ACS during cooling ambient air from its changeable current temperature to the temperature of 10, 15 and 20 ºС . It is shown that due to the different rates of annular refrigeration capacity production increment to cover the current heat loads with increasing the installed refrigeration capacity of the refrigeration machine, caused by the changes in heat load according to current climatic conditions during all the year round, it is necessary to choose a such heat load on the refrigeration machine of ACS (its installed refrigeration capacity), that provides a maximum or similar annular refrigeration capacity production at relatively high rates of its increment. Therein, the value of heat load for ambient air precooling is calculated according to remained principle as the difference between the rational total heat load and its basic relatively stable share. The proposed method is useful for defining a basic installed refrigeration capacity of the refrigeration machine of ACS with the accumulation of excessive (unapplied) refrigeration capacity at lowered current heat loads on ACS and its application for ambient air precooling, that is for covering unstable heat load share on ACS

scholarly journals ЕКОЛОГІЧНА ЕФЕКТИВНІСТЬ ОХОЛОДЖЕННЯ ПОВІТРЯ НА ВХОДІ ГТУ В РІЗНИХ КЛІМАТИЧНИХ УМОВАХ

2019 ◽  
pp. 4-8
Author(s):  
Андрій Миколайович Радченко ◽  
Микола Іванович Радченко ◽  
Ян Зонмін ◽  
Сергій Анатолійович Кантор ◽  
Богдан Сергійович Портной
Keyword(s):  
Nitric Oxide ◽  
Carbon Dioxide ◽  
Gas Turbine ◽  
Fuel Consumption ◽  
Environmental Effect ◽  
Ambient Air ◽  
Climatic Conditions ◽  
Temperate Climate ◽  
Air Cooling ◽  
Carbon Dioxide Co2

The operation of gas turbine unites significantly depends on the ambient air temperature at the inlet, and the higher it is, the greater the specific fuel consumption is spent for the production of a unit capacity (mechanical/electrical energy), and, accordingly, the more harmful substances are removed to the atmosphere with exhaust gases. To reduce the negative impact of unproductive fuel consumption during the operation of gas turbine units at elevated ambient temperatures, the inlet air cooling is applied. The paper studies the ecological efficiency of gas turbine unite inlet air cooling, taking into account the variable climatic operation conditions for regions with different climatic conditions over a period of five years (2014-2018): temperate climate of Ukraine (on the example of cities Sumy and Ternopol) and the subtropical climate of the PRC (cities Beijing and Nanjing). The annual reduction in emissions of carbon dioxide CO2 and nitric oxide NOX was chosen as indicators for assessing the environmental effect of air cooling. It has been shown that deeper cooling gas turbine unite inlet air to 7...10 °C provides almost a half to two times greater reduction in specific fuel consumption, respectively, and harmful emissions compared with traditional cooling to 15 °C by the most widespread absorption lithium-bromide chillers, and for the temperate climate of Ukraine the relative effect is much greater than for the subtropical climatic conditions of the PRC. Reducing carbon dioxide CO2 over five years for the PRC climate when cooling air to 10 °C is approximately more than 500 t, and for Ukraine – more than 240 t, and NOX nitric oxide – about 3.5 t for China and 1.6 t for Ukraine, while with traditional cooling to 15 °C: more than 300 t for China, and for Ukraine about 120 t, and nitric oxide NOX – about 2 t for China and 0.7 t for Ukraine. Based on the results of a rough assessment of the environmental effect of cooling the ambient air at the inlet of gas turbine units, in the temperate climate of Ukraine, deep cooling of the air is especially advisable, which provides almost twice the effect compared with traditional cooling to 15 °C.

scholarly journals ВИКОРИСТАННЯ НАДЛИШКУ ХОЛОДОПРОДУКТИВНОСТІ ХОЛОДИЛЬНИХ МАШИН ПРИ ОХОЛОДЖЕННІ ПОВІТРЯ НА ВХОДІ ГТУ

2020 ◽  
pp. 47-52
Author(s):  
Андрій Миколайович Радченко ◽  
Микола Іванович Радченко ◽  
Богдан Сергійович Портной ◽  
Сергій Анатолійович Кантор ◽  
Олександр Ігорович Прядко
Keyword(s):  
Gas Turbine ◽  
Lithium Bromide ◽  
Ambient Air ◽  
Air Cooling ◽  
Two Stage ◽  
Turbine Inlet ◽  
Exhaust Heat ◽  
Refrigeration Capacity ◽  
Heat Loads ◽  
Current Heat

The processes of the gas turbine inlet air cooling by exhaust heat conversion chillers, which utilizing the gas turbine exhaust gas heat, converting it into cold were analyzed. The use of two-stage air cooling has been investigated: to a temperature of 15°C – in an absorption lithium-bromide chiller and below to a temperature of 10°C – in an ejector chiller as stages of a two-stage absorption-ejector chiller. To simulate air cooling processes, the program "Guentner Product Calculator", one of the leading manufacturers of heat exchangers "Guentner", was used. The possibility of using the accumulated excess refrigeration capacity of a combined absorption-ejector chiller, which is formed at reduced current heat loads on air coolers at the gas turbine inlet, to cover the refrigeration capacity deficit arising at increased heat loads due to high ambient air temperatures has been investigated. The refrigeration capacity required to the gas turbine inlet air cooling was compared to an excess refrigeration capacity which excess of the current heat load. The considered air cooling system provides pre-cooling of air at the gas turbine inlet by using the excess refrigeration capacity of the absorption-ejector chiller, accumulated in the cold accumulator, to provide the required refrigeration capacity of the air pre-cooling booster stage. The simulation results proved the expediency of the gas turbine inlet air cooling using the accumulated excess refrigeration capacity of the combined absorption-ejector chiller. The proposed solution reduces by about 50% the design refrigeration capacity and, accordingly, the cost of the installed absorption lithium-bromide chiller, which acts as a high-temperature stage for cooling the ambient air at the gas turbine inlet.

scholarly journals ВИБІР ТЕПЛОВОГО НАВАНТАЖЕННЯ АПАРАТІВ ОХОЛОДЖЕННЯ ПОВІТРЯ НА ВХОДІ ГТУ В РІЗНИХ КЛІМАТИЧНИХ УМОВАХ

2018 ◽  
pp. 49-52
Author(s):  
Богдан Сергійович Портной
Keyword(s):  
Fuel Consumption ◽  
Thermal Load ◽  
Cooling System ◽  
Lithium Bromide ◽  
Climatic Conditions ◽  
Specific Fuel Consumption ◽  
Air Cooling ◽  
Air Cooling System ◽  
Refrigeration Capacity ◽  
Annual Reduction

It is proposed the definition of the installed (rational) refrigeration capacity of a waste heat-recovery absorption-ejector chiller that utilizes the heat of the exhaust gases of a gas turbine unite to cool the air at the inlet. Since the effect of air cooling, in particular in the form of a reduction in the specific fuel consumption, depends on its depth (the magnitude of the decrease in air temperature) and duration, it is proposed to determine it by the annual fuel economy. As an example of air cooling at the inlet of a gas turbine unit, the value of reducing specific fuel consumption due to cooling the air at the inlet to the temperature of 15 °C by an absorption lithium-bromide chiller and two-stage air cooling: to a temperature of 15 °C in an absorption lithium-bromide chiller and down to 10 °C – in a refrigerant ejector chiller as the stages of a two-stage absorption-ejector chiller, depending on the installed (design) refrigeration capacity is analyzed.It is shown that proceeding from the different rate of increment of the annual reduction in the specific fuel consumption due to the change in the thermal load in accordance with the current climatic conditions, it is necessary to choose such design heat load for the air cooling system (installed refrigeration capacity of the chillers), which ensures the achievement of the maximum or close to annual reduction in the specific fuel consumption at relatively high rates of its increment. In order to determine the installed refrigeration capacity, which ensures the maximum annual refrigeration capacity (annual production of cold), the dependence of the increment of annual fuel economy from the installed refrigeration capacity is analyzed. Based on the results of the investigation, it was proposed to determine the rational thermal load of the air cooling system (installed - the design refrigeration capacity of the chiller) in accordance with the changing climatic conditions of operation during the year, which provides a maximum annual reduction in the specific fuel consumption at relatively high rates of its increment

Increasing the efficiency of gas turbine inlet air cooling in actual climatic conditions of Kazakhstan and Ukraine

2020 ◽  
Author(s):  
A. Radchenko ◽  
N. Radchenko ◽  
A. Tsoy ◽  
B. Portnoi ◽  
S. Kantor
Keyword(s):  
Gas Turbine ◽  
Climatic Conditions ◽  
Air Cooling ◽  
Turbine Inlet
Sign in / Sign up

Export Citation Format

Share Document