scholarly journals ВИБІР ТЕПЛОВОГО НАВАНТАЖЕННЯ АПАРАТІВ ОХОЛОДЖЕННЯ ПОВІТРЯ НА ВХОДІ ГТУ В РІЗНИХ КЛІМАТИЧНИХ УМОВАХ

2018 ◽  
pp. 49-52
Author(s):  
Богдан Сергійович Портной
Keyword(s):  
Fuel Consumption ◽  
Thermal Load ◽  
Cooling System ◽  
Lithium Bromide ◽  
Climatic Conditions ◽  
Specific Fuel Consumption ◽  
Air Cooling ◽  
Air Cooling System ◽  
Refrigeration Capacity ◽  
Annual Reduction

It is proposed the definition of the installed (rational) refrigeration capacity of a waste heat-recovery absorption-ejector chiller that utilizes the heat of the exhaust gases of a gas turbine unite to cool the air at the inlet. Since the effect of air cooling, in particular in the form of a reduction in the specific fuel consumption, depends on its depth (the magnitude of the decrease in air temperature) and duration, it is proposed to determine it by the annual fuel economy. As an example of air cooling at the inlet of a gas turbine unit, the value of reducing specific fuel consumption due to cooling the air at the inlet to the temperature of 15 °C by an absorption lithium-bromide chiller and two-stage air cooling: to a temperature of 15 °C in an absorption lithium-bromide chiller and down to 10 °C – in a refrigerant ejector chiller as the stages of a two-stage absorption-ejector chiller, depending on the installed (design) refrigeration capacity is analyzed.It is shown that proceeding from the different rate of increment of the annual reduction in the specific fuel consumption due to the change in the thermal load in accordance with the current climatic conditions, it is necessary to choose such design heat load for the air cooling system (installed refrigeration capacity of the chillers), which ensures the achievement of the maximum or close to annual reduction in the specific fuel consumption at relatively high rates of its increment. In order to determine the installed refrigeration capacity, which ensures the maximum annual refrigeration capacity (annual production of cold), the dependence of the increment of annual fuel economy from the installed refrigeration capacity is analyzed. Based on the results of the investigation, it was proposed to determine the rational thermal load of the air cooling system (installed - the design refrigeration capacity of the chiller) in accordance with the changing climatic conditions of operation during the year, which provides a maximum annual reduction in the specific fuel consumption at relatively high rates of its increment

scholarly journals ВИЗНАЧЕННЯ ВСТАНОВЛЕНОЇ ХОЛОДОПРОДУКТИВНІСТІ СИСТЕМИ ОХОЛОДЖЕННЯ ПОВІТРЯ НА ВХОДІ ГАЗОТУРБІННОЇ УСТАНОВКИ ЗА ПОТОЧНИМ ТЕПЛОВИМ НАВАНТАЖЕННЯМ

2019 ◽  
pp. 56-60
Author(s):  
Андрій Миколайович Радченко ◽  
Ян Зонмін ◽  
Микола Іванович Радченко ◽  
Сергій Анатолійович Кантор ◽  
Богдан Сергійович Портной ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Maximum Rate ◽  
Cooling System ◽  
Ambient Air ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Air Cooling ◽  
Consumption Reduction ◽  
Air Cooling System ◽  
Annual Reduction

Significant fluctuations of the current temperature and relative humidity of the ambient air lead to significant changes in the thermal load on the cooling system at the inlet of gas turbine units (GTU), which acutely raises the problem of choosing their installed (design) thermal load. Calculations of ambient air cooling processes were carried out for different climatic conditions, for example, southern Ukraine (Mykolaiv) and Central China (Beijing). It is  analyzed two methods of determination of the installed (design) cooling capacity of the ambient air cooling system at the GTU inlet according to the maximum current reduction of fuel consumption and according to the maximum rate (increase) of annual reduction of fuel consumption following to increasing of the installed cooling capacity, calculated by summarizing the current values of fuel consumption reduction. It is shown that the values of the installed cooling capacity of the air cooling system at the GTU inlet, determined by both methods, are close enough but differ significantly for different climatic conditions. The advantage of the method of calculating the installed cooling capacity of the air cooling system at the GTU inlet according to the maximum rate of annual reduction in fuel consumption is the possibility of a more precise definition of it due to the absence of significant fluctuations in the annual reduction in fuel consumption, calculated by summarizing the current values of fuel consumption reduction. Since the maximum reduction in fuel consumption per year is achieved with some decrease in the rate of its increment at high values of the design cooling capacity, required in the hottest hours in the summer and excessive in somewhat cool periods (at night and in the morning even in the summer), the installed cooling capacity, determined according to the maximum rate of the reduction of fuel consumption, will be insufficient in times of increased thermal loads above their design value. In such cases, the elimination of the deficit in cooling capacity is possible by using an excess of cold accumulated during reduced thermal loads

scholarly journals МЕТОД ВИЗНАЧЕННЯ ХОЛОДОПРОДУКТИВНОСТІ ТЕРМОТРАНСФОРМАТОРА ЗА МАКСИМАЛЬНИМ ТЕМПОМ ПРИРОЩЕННЯ ТЕРМОЧАСОВОГО ПОТЕНЦІАЛУ ОХОЛОДЖЕННЯ ПОВІТРЯ

2018 ◽  
pp. 53-57
Author(s):  
Андрій Миколайович Радченко
Keyword(s):  
Heat Load ◽  
Maximum Rate ◽  
Cooling System ◽  
Combustion Engine ◽  
Potential Method ◽  
Climatic Conditions ◽  
Air Cooling ◽  
Air Cooling System ◽  
Refrigeration Capacity ◽  
Cooling Air

It is proved a possibility of using the thermohour cooling potential method, developed by the author, for defining the installed (design) refrigeration capacity of term transformer (refrigeration machine), providing a maximum rate of thermo-hour cooling potential increasing according to the current climatic conditions for a definite period of operation.It is proposed to define the effect, gained due to cooling air, in particular at the inlet of GTU, depends on duration and depth of cooling, by thermohour potential ÕS,°С·h, as air temperature decrease Δta  multiplied by duration τ of GTU operation at decreased temperature: ÕS = ∑(Δta ∙°τ), which to some extent characterizes heat load on the cooling system.It is shown that taking into consideration a different rate of annual thermohour cooling potential arising with increasing the installed refrigeration capacity of term transformer, caused by changing the heat load according to current climatic conditions during a year, it is necessary to choose such design heat load on the air cooling system (refrigeration capacity of term transformer) that provides a maximum value of annual thermohour cooling potential or close it with relatively high rates of its increasing.   To define the installed refrigeration capacity, providing a maximum rate of annual thermohour cooling potential increasing, it is analyzed the dependence of annual thermohour cooling potential related to the installed refrigeration capacity of term transformer, from the installed refrigeration capacity of term transformer. As a result of the investigation, it is proposed the method of defining the design heat load (installed refrigeration capacity) of term transformer with maximum rates of increasing thermohour cooling potential, as a further development of methodology of rational designing of them transformers for combustion engine inlet air cooling on the base of thermohour potential, developed by author

scholarly journals МЕТОД ВИЗНАЧЕННЯ ТЕПЛОВОГО НАВАНТАЖЕННЯ СИСТЕМИ КОНДИЦІЮВАННЯ ПОВІТРЯ ЗА МАКСИМАЛЬНИМ ТЕМПОМ ПРИРОЩЕННЯ ХОЛОДОПРОДУКТИВНОСТІ (на прикладі кондиціювання повітря енергетичного призначення)

2018 ◽  
pp. 44-48
Author(s):  
Микола Іванович Радченко ◽  
Євген Іванович Трушляков ◽  
Сергій Анатолійович Кантор ◽  
Богдан Сергійович Портной ◽  
Анатолій Анатолійович Зубарєв
Keyword(s):  
Thermal Load ◽  
Air Conditioning ◽  
Lithium Bromide ◽  
Ambient Air ◽  
Climatic Conditions ◽  
Annual Production ◽  
Air Cooling ◽  
Two Stage ◽  
Air Conditioning System ◽  
Refrigeration Capacity

It is justified the necessity of taking into consideration changes in thermal loads on the air conditioning system (heat and moisture treatment of air by cooling it with decreasing temperature and moisture content) in accordance with the current climatic conditions of operation. Since the effect of air cooling depends on the duration of its use and the amount of cold consumption, it is suggested that it be determined by the amount of cold spent per year for air conditioning at the GTU inlet, that is, for annual refrigerating capacity. The example of heat-using air conditioning at the inlet of a gas turbine unite (energy–efficient air conditioning systems) analyzes the annual costs of cooling for cooling ambient air to the temperature of 15 °C by an absorption lithium-bromide chiller and two-stage air cooling: to a temperature of 15 °C in an absorption lithium-bromide chiller and down to temperature 10 °С – in a refrigerant ejector chiller as the stages of a two-stage absorption-ejector chiller, depending on the installed (project) refrigerating capacity of waste heat recovery chiller.It is shown that, based on the varying rate of increment in the annual production of cold (annual refrigeration capacity) due to the change in the thermal load in accordance with current climatic conditions, it is necessary to select such a design thermal load for the air conditioning system (installed refrigeration capacity of chillers), which ensures the achievement of maximum or close to it annual production of cold at a relatively high rate of its increment. It is analyzed the dependence of the increment on the annual refrigerated capacity, relative to the installed refrigeration capacity, on the installed refrigeration capacity, in order to determine the installed refrigeration capacity, which provides the maximum rate of increase in the annual refrigerating capacity (annual production of cold). Based on the results of the research, it is proposed the method for determining the rational thermal load of the air conditioning system (installed – the design refrigeration capacity of the chiller) in accordance with the changing climatic conditions of operation during the year, which provides nearby the maximum annual production of cold at relatively high rates of its growth

scholarly journals ВИКОРИСТАННЯ РЕЗЕРВУ ХОЛОДОПРОДУКТИВНОСТІ АБСОРБЦІЙНОЇ ХОЛОДИЛЬНОЇ МАШИНИ ПРИ ОХОЛОДЖЕННІ ПОВІТРЯ НА ВХОДІ ГТУ

2018 ◽  
pp. 39-44
Author(s):  
Богдан Сергійович Портной ◽  
Андрій Миколайович Радченко ◽  
Роман Миколайович Радченко ◽  
Сергій Анатолійович Кантор
Keyword(s):  
Gas Turbine ◽  
Turbine Unit ◽  
Cooling System ◽  
Lithium Bromide ◽  
Air Cooling ◽  
Gas Turbine Unit ◽  
Air Cooler ◽  
Refrigeration Capacity ◽  
Heat Loads ◽  
Current Heat

The processes of air cooling at the gas turbine unit inlet by absorption lithium-bromide chiller have been analyzed. The computer programs of firms-producers of heat exchangers were used for the gas turbine unit inlet air cooling processes simulation. The absorption lithium-bromide chiller refrigeration capacity reserve (the design heat load excess over the current heat loads) generated at the reduced current heat loads on the air coolers at the gas turbine unit inlet in accordance with the lowered ambient air parameters has been considered. The absorption lithium-bromide chiller refrigeration capacity reserve is expedient to use at increased heat load on the air cooler. To solve this problem the refrigeration capacity required for cooling air at the gas turbine unit inlet has been compared with the excessive absorption lithium-bromide chiller refrigeration capacity exceeding current heat loads during July 2017.The scheme of gas turbine unit inlet air cooling system with using the absorption lithium-bromide chiller refrigeration capacity reserve has been proposed. The proposed air cooling system provides gas turbine unit inlet air precooling in the air cooler booster stage by using the absorption lithium-bromide chiller excessive refrigeration capacity. The absorption chiller excessive refrigeration capacity generated during decreased heat loads on the gas turbine unit inlet air cooler is accumulated in the thermal storage. The results of simulation show the expediency of the gas turbine unit inlet air cooling by using the absorption lithium-bromide chiller refrigeration capacity reserve, which is generated at reduced thermal loads, for the air precooling in the air cooler booster stage. This solution provides the absorption lithium-bromide chiller installed (designed) refrigeration capacity and cost reduction by almost 30%. The solution to increase the efficiency of gas turbine unit inlet air cooling through using the absorption chiller excessive refrigeration potential accumulated in the thermal storage has been proposed.

scholarly journals Gas turbine unite inlet air cooling by using an excessive refrigeration capacity of absorption-ejector chiller in booster air cooler

2018 ◽  
Vol 70 ◽  
pp. 03012 ◽  
Author(s):  
Roman Radchenko ◽  
Andrii Radchenko ◽  
Serhiy Serbin ◽  
Serhiy Kantor ◽  
Bohdan Portnoi
Keyword(s):  
Gas Turbine ◽  
Cooling System ◽  
Ambient Air ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Air Cooling ◽  
Two Stage ◽  
Air Cooler ◽  
Refrigeration Capacity ◽  
Heat Loads

Two-stage Gas turbine unite (GTU) inlet air cooling by absorption lithium-bromide chiller (ACh) to the temperature 15 °C and by refrigerant ejector chiller (ECh) to 10 °C through utilizing the turbine exhaust gas heat for changeable ambient air temperatures and corresponding heat loads on the air coolers for the south Ukraine climatic conditions is analysed. An excessive refrigeration capacity of combined absorption-ejector chiller (AECh) exceeding the current heat loads and generated at decreased heat loads on the air coolers at the inlet of GTU can be used for covering increased heat loads to reduce the refrigeration capacity of AECh. The GTU inlet air cooling system with an ambient air precooling booster stage and a base two-stage cooling air to the temperature 10 °C by AECh is proposed. The AECh excessive cooling capacity generated during decreased heat loads on the GTU inlet air coolers is conserved in the thermal accumulator and used for GTU inlet air precooling in a booster stage of air cooler during increased heat loads. There is AECh cooling capacity reduction by 50% due to the use of a booster stage for precooling GTU inlet ambient air at the expense of an excessive cooling capacity accumulated in the thermal storage.

Optimal Vacuum Calculation and Analysis of Composite-Cycle Air-Cooling System

2013 ◽  
Vol 718-720 ◽  
pp. 1687-1690 ◽  
Author(s):  
Sheng Long Wang ◽  
Wen Hao Li ◽  
Yin Hai Ge
Keyword(s):  
Cooling System ◽  
Calculation Model ◽  
Climatic Conditions ◽  
System Structure ◽  
Air Cooling ◽  
Air Cooling System ◽  
Working Principle ◽  
Annual Earnings ◽  
Correct Understanding ◽  
The Impact

In this paper, the research object is composite-cycle air-cooling system. First,gave a brief introduction of the system structure and the working principle in power plant. Then the optimal vacuum calculation model was established with the analysis of performance indicators and the amount of equipment production, consumption power of system. Analyze the impact of the ambient temperature to system optimal vacuum in variable conditions. Lastly, combining the climatic conditions of example, which can be drawn is that when the annual best vacuum is 4.8kPa, the running annual earnings is the highest. This article provides guiding significance for correct understanding and engineering applications of composite-cycle air-cooling systems, also further confirm the feasibility of composite-cycle air-cooling system.

scholarly journals Innovative Turbine Intake Air Cooling Systems and Their Rational Designing

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6201
Author(s):  
Andrii Radchenko ◽  
Eugeniy Trushliakov ◽  
Krzysztof Kosowski ◽  
Dariusz Mikielewicz ◽  
Mykola Radchenko
Keyword(s):  
Gas Turbines ◽  
Maximum Rate ◽  
Cooling System ◽  
Ambient Air ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Air Cooling ◽  
Thermal Loads ◽  
Cooling Systems ◽  
Air Cooling System

The efficiency of cooling ambient air at the inlet of gas turbines in temperate climatic conditions was analyzed and reserves for its enhancing through deep cooling were revealed. A method of logical analysis of the actual operation efficiency of turbine intake air cooling systems in real varying environment, supplemented by the simplest numerical simulation was used to synthesize new solutions. As a result, a novel trend in engine intake air cooling to 7 or 10 °C in temperate climatic conditions by two-stage cooling in chillers of combined type, providing an annual fuel saving of practically 50%, surpasses its value gained due to traditional air cooling to about 15 °C in absorption lithium-bromide chiller of a simple cycle, and is proposed. On analyzing the actual efficiency of turbine intake air cooling system, the current changes in thermal loads on the system in response to varying ambient air parameters were taken into account and annual fuel reduction was considered to be a primary criterion, as an example. The improved methodology of the engine intake air cooling system designing based on the annual effect due to cooling was developed. It involves determining the optimal value of cooling capacity, providing the minimum system sizes at maximum rate of annual effect increment, and its rational value, providing a close to maximum annual effect without system oversizing at the second maximum rate of annual effect increment within the range beyond the first maximum rate. The rational value of design cooling capacity provides practically the maximum annual fuel saving but with the sizes of cooling systems reduced by 15 to 20% due to the correspondingly reduced design cooling capacity of the systems as compared with their values defined by traditional designing focused to cover current peaked short-term thermal loads. The optimal value of cooling capacity providing the minimum sizes of cooling system is very reasonable for applying the energy saving technologies, for instance, based on the thermal storage with accumulating excessive (not consumed) cooling capacities at lowered current thermal loads to cover the peak loads. The application of developed methodology enables revealing the thermal potential for enhancing the efficiency of any combustion engine (gas turbines and engines, internal combustion engines, etc.).

scholarly journals Using meteorological data to determine the risk of heat stress

2012 ◽  
Vol 52 (No. 2) ◽  
pp. 39-47
Author(s):  
V. Šleger ◽  
P. Neuberger
Keyword(s):  
Air Temperature ◽  
Cooling System ◽  
Meteorological Data ◽  
Climatic Conditions ◽  
Egg Laying ◽  
Air Cooling ◽  
Computation Technique ◽  
Stable Housing ◽  
Air Cooling System ◽  
Evaporation Cooling

This paper first proposes a technique of computing air temperature and humidity in stables based on outdoor air parameters and biological production of animals. The computation technique is outlined. The calculated values are then used to assess the potential of evaporation cooling in mild climatic conditions. Graphs illustrate the assumed effect of evaporation cooling equipment inside a stable housing of egg laying hens. Used in the computation were hourly meteorological readings obtained during the period May to August in years 2000 to 2002, in the locality with a potential installation of a cooling system. Other Graphs illustrate the time the animals spent in an environment with a particular air temperature. For instance in June 2002, the time animals in the stable were exposed to temperatures 27°C or higher was reduced by using an air cooling system from 39 h to 22 h, and in July 2002 from 33 h to 4 h. The envisaged model can be modified for other kinds of gallinaceous poultry and pigs.

Sign in / Sign up

Export Citation Format

Share Document