Demonstrating the effects of elastic support on power generation and storage capability of piezoelectric energy harvesting devices

2018 ◽  
Vol 30 (2) ◽  
pp. 323-332 ◽  
Author(s):  
Mohammad Reza Zamani Kouhpanji
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Elastic Properties ◽  
Elastic Support ◽  
Physical Parameters ◽  
Piezoelectric Energy Harvesting ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam ◽  
Energy Harvesting Devices ◽  
And Storage

This study represents effects of an elastic support on the power generation and storage capability of piezoelectric energy harvesting devices. The governing equations were derived and solved for a piezoelectric energy harvesting device made of elastic support, multilayer piezoelectric beam, and a proof mass at its free end. Furthermore, a Thevenin model for a rechargeable battery was considered for storage of the produced power of the piezoelectric energy harvesting device. Analyzing the time-domain and frequency-domain responses of the piezoelectric energy harvesting device on an elastic support shows that the elastic deformation of the support significantly reduces the power generation and storage capability of the device. It was also found that the power generation and storage capability of the piezoelectric energy harvesting device can be enhanced by choosing appropriate physical parameters of the piezoelectric beam even if the elastic properties of the support are poor relative to elastic properties of the piezoelectric beam. These results provide an insightful understanding for designing and material selection for the support in order to reach the highest possible power generation and storage capability for piezoelectric energy harvesting devices.

scholarly journals Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm

2014 ◽  
Vol 111 (5) ◽  
pp. 1927-1932 ◽  
Author(s):  
Canan Dagdeviren ◽  
Byung Duk Yang ◽  
Yewang Su ◽  
Phat L. Tran ◽  
Pauline Joe ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Energy Harvesting ◽  
Piezoelectric Energy ◽  
And Storage

Topology Optimization of Piezoelectric Energy Harvesting Devices Subjected to Stochastic Excitation

2010 ◽  
Author(s):  
Zheqi Lin ◽  
Hae Chang Gea ◽  
Shutian Liu
Keyword(s):  
Topology Optimization ◽  
Energy Harvesting ◽  
Electrical Energy ◽  
Ambient Vibration ◽  
Piezoelectric Energy Harvesting ◽  
The Past ◽  
Piezoelectric Energy ◽  
Random Responses ◽  
Pseudo Excitation ◽  
Energy Harvesting Devices

Converting ambient vibration energy into electrical energy using piezoelectric energy harvester has attracted much interest in the past decades. In this paper, topology optimization is applied to design the optimal layout of the piezoelectric energy harvesting devices. The objective function is defined as to maximize the energy harvesting performance over a range of ambient vibration frequencies. Pseudo excitation method (PEM) is applied to analyze structural stationary random responses. Sensitivity analysis is derived by the adjoint method. Numerical examples are presented to demonstrate the validity of the proposed approach.

A Low-order Model for the Design of Piezoelectric Energy Harvesting Devices

2008 ◽  
Vol 20 (5) ◽  
pp. 495-504 ◽  
Author(s):  
Jeffrey L. Kauffman ◽  
George A. Lesieutre
Keyword(s):  
Energy Harvesting ◽  
Design Tool ◽  
Mode Shapes ◽  
Piezoelectric Energy Harvesting ◽  
Coupling Coefficients ◽  
Order Model ◽  
Power Sources ◽  
Piezoelectric Energy ◽  
Energy Harvesting Devices ◽  
Low Order

Piezoelectric energy harvesting devices are an attractive approach to providing remote wireless power sources. They operate by converting available vibration energy and storing it as electrical energy. Currently, most devices rely on mechanical excitation near their resonance frequency, so a low-order model which computes a few indicators of device performance is a critical design tool. Such a model, based on the assumed modes method, develops equations of motion to provide rapid computations of key device parameters, such as the natural frequencies, mode shapes, and electro-mechanical coupling coefficients. The model is validated with a comparison of its predictions and experimental data.

Periodic Solutions of an Impact-Driven Frequency Up-Conversion Piezoelectric Harvester

2019 ◽  
Vol 29 (10) ◽  
pp. 1930029 ◽  
Author(s):  
Amin Abedini ◽  
Saeed Onsorynezhad ◽  
Fengxia Wang
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Periodic Solutions ◽  
Output Power ◽  
Power Efficiency ◽  
Low Frequency ◽  
Base Excitation ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam ◽  
The Impact

Frequency up-conversion has been proved to be an effective approach to increase the output power of a piezoelectric energy harvester (PEH). The proposed system can convert low-frequency vibration from ambient sources to the resonant vibration of the PEH hence can improve the output power efficiency. Frequency up-conversion technologies are introduced via impact or nonimpact magnetic forces to initiate the repeated free oscillations of the piezoelectric generator. No matter impact- or nonimpact-driven PEHs, most studies focus on either finite element simulation or experimental demonstration of PEHs electric power generations. Few, if any, study the effects of the impact-induced discontinuous dynamics on power generation efficiency. In this work, the energy harvesting performance of a piezoelectric beam upon interaction with a softer driving beam was studied. The discontinuous dynamics behind this impact-driven PEH was investigated, and strategies exploited to further improve the power efficiency of the frequency up-conversion process. Based on the linear elastic and linear mechanical-electrical constitutive laws, the lumped parameter models were built for both the driving beam and the piezoelectric driven beam. The numerical solution of the output power is obtained based on the vibration amplitude, frequency, and the electrical load. The soft beam is subjected to a sinusoidal base excitation, and the piezoelectric beam was excited via impacting with the soft driving beam. Based on the discontinuous dynamics theory, the performance of the energy harvesting of the impact-driven system was studied for period-1 and period-2 motions. Based on the stability and bifurcation analysis of periodic solutions, bifurcation diagrams of impact velocities, times, displacements and harvested power versus the frequency of the base excitation were also obtained, and compared to the power generation of a piezoelectric beam with base excitation.

scholarly journals Study of a Piezoelectric Energy Harvesting Floor Structure with Force Amplification Mechanism

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3516 ◽  
Author(s):  
He ◽  
Wang ◽  
Zhong ◽  
Guan
Keyword(s):  
Energy Harvesting ◽  
Output Power ◽  
Piezoelectric Energy Harvesting ◽  
Step Frequency ◽  
Peak Voltage ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam ◽  
Piezoelectric Elements ◽  
Floor Structure ◽  
Amplification Mechanism

This paper proposes a novel energy harvesting floor structure using piezoelectric elements for converting energy from human steps into electricity. The piezoelectric energy harvesting structure was constructed by a force amplification mechanism and a double-layer squeezing structure in which piezoelectric beams were deployed. The generated electrical voltage and output power were investigated in practical conditions under different strokes and step frequencies. The maximum peak-to-peak voltage was found to be 51.2 V at a stroke of 5 mm and a step frequency of 1.81 Hz. In addition, the corresponding output power for a single piezoelectric beam was tested to be 134.2 μW, demonstrating the potential of harvesting energy from the pedestrians for powering low-power electronic devices.

Modeling and Analysis of Piezoelectric Energy Harvesting With Dynamic Plucking Mechanism

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
Xinlei Fu ◽  
Wei-Hsin Liao
Keyword(s):  
Energy Harvesting ◽  
Research Work ◽  
Dynamic Interaction ◽  
Contact Theory ◽  
Vibration Energy ◽  
Piezoelectric Energy Harvesting ◽  
Comprehensive Model ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam

Nonharmonic excitations are widely distributed in the environment. They can work as energy sources of vibration energy harvesters for powering wireless electronics. To overcome the narrow bandwidth of linear vibration energy harvesters, plucking piezoelectric energy harvesters have been designed. Plucking piezoelectric energy harvesters can convert sporadic motions into plucking force to excite vibration energy harvesters and achieve broadband performances. Though different kinds of plucking piezoelectric energy harvesters have been designed, the plucking mechanism is not well understood. The simplified models of plucking piezoelectric energy harvesting neglect the dynamic interaction between the plectrum and the piezoelectric beam. This research work is aimed at investigating the plucking mechanism and developing a comprehensive model of plucking piezoelectric energy harvesting. In this paper, the dynamic plucking mechanism is investigated and the Hertzian contact theory is applied. The developed model of plucking piezoelectric energy harvesting accounts for the dynamic interaction between the plectrum and the piezoelectric beam by considering contact theory. Experimental results show that the developed model well predicts the responses of plucking piezoelectric energy harvesters under different plucking velocities and overlap lengths. Parametric studies are conducted on the dimensionless model after choosing appropriate scaling. The influences of plucking velocity and overlap length on energy harvesting performance and energy conversion efficiency are discussed. The comprehensive model helps investigate the characteristics and guide the design of plucking piezoelectric energy harvesters.

Sign in / Sign up

Export Citation Format

Share Document