Evaluation of Appropriateness and Interpretation of Serum Theophylline Assays

1985 ◽  
Vol 19 (5) ◽  
pp. 380-384 ◽  
Author(s):  
Christine Sargenti ◽  
Lawrence Zelman ◽  
Therese Beauclair ◽  
Elwyn Garrard ◽  
Ralph Boehm

A drug utilization review of serum theophylline assays was undertaken to: (1) evaluate the prescriben' usage and interpretation of serum theophylline levels (STLs), and (2) calculate the cost of inappropriate assays. Criteria for appropriate use and interpretation were defined by an audit committee and approved by the chief medical resident. STLs were evaluated on medicine patients for a one-month period. Results of 102 levels ordered showed that 47 percent were inappropriate. The reasons cited most often for inappropriateness were: (1) previously-known STLs with no reason to expect a change in subsequent levels (26 percent); and (2) STLs drawn prior to steady state (12 percent). None of the levels evaluated had a request entered for the sampling time to be recorded. STLs were interpreted with the same degree of accuracy regardless of whether they were ordered appropriately. Results from this study suggest significant cost savings can be realized if physicians' ordering habits are corrected.

2018 ◽  
Vol 54 (6) ◽  
pp. 389-392
Author(s):  
Kiranjit Luther ◽  
Guang Mei Fung ◽  
Farah Khorassani

Purpose: Paliperidone and risperidone are atypical antipsychotics that are structurally and therapeutically similar. Risperidone is metabolized by the liver via cytochrome (CYP) 2D6 to an active metabolite, 9-hydroxyrisperidone. The atypical antipsychotic paliperidone is 9-hydroxyrisperidone formulated separately as an extended-release (ER) tablet and is considerably more expensive than risperidone. The purpose of this retrospective drug utilization review is to evaluate the prescribing patterns of paliperidone ER and evaluate potential cost savings by converting paliperidone ER orders to risperidone at an inpatient psychiatric hospital’s formulary. Methods: This retrospective drug utilization review includes 100 patients, older than 18 years old, who were prescribed oral paliperidone ER at an inpatient, psychiatric hospital between January 1, 2017, and June 2, 2017. The data were collected through the electronic medical records. Patients who were prescribed oral paliperidone ER and refused to take paliperidone ER were excluded from the study population. The cost of each patient’s oral paliperidone ER pharmacotherapy was calculated using average wholesale prices. An equivalent total dose of risperidone therapy was calculated using a 2:3 paliperidone ER to risperidone conversion. The cost savings were then analyzed by comparing the total costs of paliperidone ER with risperidone therapy. Results: The results indicate that from January through June 2017, approximately 68% of all paliperidone ER utilization was for its approved indication of schizophrenia and schizoaffective disorder. The other 32% of utilization was either off-label or for approved indications of risperidone. The total paliperidone ER therapy cost for 100 patients was approximately $17 000, while the cost of risperidone therapy would be approximately $400 for the same patients over 6 months. Overall, this would provide an estimated cost savings of over $33 000 per year or about $169 in savings per patient. Conclusion: The study analysis demonstrates that there are opportunities for cost savings through therapeutic interchange of paliperidone ER to risperidone.


Curationis ◽  
1998 ◽  
Vol 21 (4) ◽  
Author(s):  
K. Day ◽  
S. Booyens

The purpose of the study was to examine the cost-effectiveness of managed care interventions with respect to prescriptions for chronic illness sufferers enrolled with a specific medical scheme. The illnesses included, were epilepsy, hypertension, diabetes and asthma. The managed care interventions applied were a primary discount; the use of preferred provider pharmacies, and drug utilization review. It was concluded that the managed care interventions resulted in some real cost savings.


2015 ◽  
Vol 4 (6) ◽  
pp. 82 ◽  
Author(s):  
Julie M. Mhlaba ◽  
Emily W. Stockert ◽  
Martin Coronel ◽  
Alexander J. Langerman

Objective: Operating rooms (OR) generate a large portion of hospital revenue and waste. Consequently, improving efficiency and reducing waste is a high priority. Our objective was to quantify waste associated with opened but unused instruments from trays and to compare this with the cost of individually wrapping instruments.Methods: Data was collected from June to November of 2013 in a 550-bed hospital in the United States. We recorded the instrument usage of two commonly-used trays for ten cases each. The time to decontaminate and reassemble instrument trays and peel packs was measured, and the cost to reprocess one instrument was calculated.Results: Average utilization was 14% for the Plastic Soft Tissue Tray and 29% for the Major Laparotomy Tray. Of 98 instruments in the Plastics tray (n = 10), 0% was used in all cases observed and 59% were used in no observed cases. Of 110 instruments in the Major Tray (n = 10), 0% was used in all cases observed and 25% were used in no observed cases. Average cost to reprocess one instrument was $0.34-$0.47 in a tray and $0.81-$0.84 in a peel pack, or individually-wrapped instrument.Conclusions: We estimate that the cost of peel packing an instrument is roughly two times the cost of tray packing. Therefore, it becomes more cost effective from a processing standpoint to package an instrument in a peel pack when there is less than a 42%-56% probability of use depending on instrument type. This study demonstrates an opportunity for reorganization of instrument delivery that could result in a significant cost-savings and waste reduction.


Author(s):  
Benjamin R. Hubbard ◽  
Joshua M. Pearce

This study provides designs for a low-cost, easily replicable open source lab-grade digital scale that can be used as a precision balance. The design is such that it can be manufactured for use in most labs throughout the world with open source RepRap-class material extrusion-based 3-D printers for the mechanical components and readily available open source electronics including the Arduino Nano. Several versions of the design were fabricated and tested for precision and accuracy for a range of load cells. The results showed the open source scale was found to be repeatable within 0.1g with multiple load cells, with even better precision (0.01g) depending on load cell range and style. The scale tracks linearly with proprietary lab-grade scales, meeting the performance specified in the load cell data sheets, indicating that it is accurate across the range of the load cell installed. The smallest loadcell tested(100g) offers precision on the order of a commercial digital mass balance. The scale can be produced at significant cost savings compared to scales of comparable range and precision when serial capability is present. The cost savings increase significantly as the range of the scale increases and are particularly well-suited for resource-constrained medical and scientific facilities.


1987 ◽  
Vol 21 (3) ◽  
pp. 286-289 ◽  
Author(s):  
Andrew J. Donnelly

A prospective drug utilization review (DUR) was performed on the colloids albumin 5% and hetastarch 6% at the University of Illinois Hospital Operating Room Pharmacy. This DUR's purpose was to evaluate the usage patterns of the two colloids. With the addition of hetastarch 6% to the formulary, an alternative colloid was available that could be therapeutically substituted for albumin 5% at a cost savings. Its usage, however, was not what would have been expected. Usage information was obtained by placing utilization forms inside the individual boxes of albumin 5% and hetastarch 6%. These forms were completed by the anesthesiologists and returned to the pharmacy, where the remainder of each form was completed. It was concluded that 93 percent of the patients administered albumin 5% could have received hetastarch 6%. Hence, potential yearly savings of approximately $12 346.00 could be realized by the Department of Pharmacy.


1986 ◽  
Vol 1 (20) ◽  
pp. 153
Author(s):  
K.J. MacIntosh ◽  
W.F. Baird

At the 19th ICE Conference in Houston in 1984 an alternative concept for the design of rubble mound breakwaters was introduced. This concept has the objective of providing a least cost structure by optimizing the use of locally available materials and utilizing simple construction procedures. Contractors' bids demonstrated that significant cost savings could be achieved, when compared to the cost of traditional designs. Considerable prototype experience has now been obtained with this concept of breakwaters. Breakwaters have been built using the concept in Canada, the United States, and Iceland since 1984 and have been subjected to storms and ice action. Prototype observations have supported the performance predicted during the design process. In this paper surveys of a breakwater taken after construction and after storm action are presented. In addition to wave action, this breakwater has also been subjected to extensive ice action. The response of the breakwater has been monitored and observed and is discussed.


The purpose of this research is to evaluate the design of a coffee maker by using Boothroyd Dewhurst Method which this method is one of the Design for Assembly (DFA) methods. DFA method will help to simplify the assembly designs of the product that will leads to significant cost savings and less tine to produce a product. Main objective of DFA is to estimate the difficulty of assembly, eliminate unnecessary parts and assembly tooling and design products that are less costly to manufacture. The study will focus on analyzing the current design of coffee maker, reducing the number of parts, comparing the design efficiency and the cost between the current and improved design. The product is evaluated by using Manual Handling Table and Manual Insertion Table. The results of current design are used to make improvement to the coffee maker. Then, new design is made by eliminating or combining the old design so that total cost and time for assemble the coffe maker is reduced. Lastly, comparison is made between new and old design.


BMC Medicine ◽  
2020 ◽  
Vol 18 (1) ◽  
Author(s):  
Anne B. Wichmann ◽  
◽  
Eddy M. M. Adang ◽  
Kris C. P. Vissers ◽  
Katarzyna Szczerbińska ◽  
...  

Abstract Background The number of residents in long-term care facilities (LTCFs) in need of palliative care is growing in the Western world. Therefore, it is foreseen that significantly higher percentages of budgets will be spent on palliative care. However, cost-effectiveness analyses of palliative care interventions in these settings are lacking. Therefore, the objective of this paper was to assess the cost-effectiveness of the ‘PACE Steps to Success’ intervention. PACE (Palliative Care for Older People) is a 1-year palliative care programme aiming at integrating general palliative care into day-to-day routines in LTCFs, throughout seven EU countries. Methods A cluster RCT was conducted. LTCFs were randomly assigned to intervention or usual care. LTCFs reported deaths of residents, about whom questionnaires were filled in retrospectively about resource use and quality of the last month of life. A health care perspective was adopted. Direct medical costs, QALYs based on the EQ-5D-5L and costs per quality increase measured with the QOD-LTC were outcome measures. Results Although outcomes on the EQ-5D-5L remained the same, a significant increase on the QOD-LTC (3.19 points, p value 0.00) and significant cost-savings were achieved in the intervention group (€983.28, p value 0.020). The cost reduction mainly resulted from decreased hospitalization-related costs (€919.51, p value 0.018). Conclusions Costs decreased and QoL was retained due to the PACE Steps to Success intervention. Significant cost savings and improvement in quality of end of life (care) as measured with the QOD-LTC were achieved. A clinically relevant difference of almost 3 nights shorter hospitalizations in favour of the intervention group was found. This indicates that timely palliative care in the LTCF setting can prevent lengthy hospitalizations while retaining QoL. In line with earlier findings, we conclude that integrating general palliative care into daily routine in LTCFs can be cost-effective. Trial registration ISRCTN14741671.


2020 ◽  
Vol 38 (15_suppl) ◽  
pp. e19362-e19362
Author(s):  
Jennifer Webster ◽  
Robert E. Smith ◽  
Danielle Wieland ◽  
John Verniero ◽  
Jeffrey A. Scott

e19362 Background: Pegfilgrastim is a key supportive care agent in oncology patients, providing significant febrile neutropenia prophylaxis for patients on chemotherapy. However, pegfilgrastim also accounts for 5.3% of the total cost of cancer care for all patients in the Oncology Care Model (OCM). Fluctuations in the cost or quantity of pegfilgrastim can have significant impact on a practice’s performance under OCM. One such cost fluctuation is the introduction of biosimilars to the marketplace. This study seeks to understand how CMS reimbursement for pegfilgrastim has been impacted by the introduction of two pegfilgrastim biosimilars into the market. Methods: We tracked average CMS reimbursement for pegfilgrastim (Neulasta, Udenyca and Fulphila) from 7/1/2016 through 6/30/2019. We compared the average reimbursement and the average change in reimbursement before and after the introduction of biosimilars. Results: Prior to the introduction of biosimilars, the Medicare Part B reimbursement (80% of ASP +6%) of pegfilgrastim increased at a steady rate of $292 per year through the first 30 months of the OCM program, resulting in an average reimbursement of $3636 per administration in Q3 2018. However, since the introduction of biosimilars, average pegfilgrastim reimbursement has held steady, averaging $3543 for the time period from 7/1/2018 through 6/30/2019. The change in reimbursement has decreased from $292/year to -$93/year. Conclusions: In 2018, 88,847 Medicare patients received pegfilgrastim, resulting in $1.39 billion in Medicare reimbursement. Assuming that the patterns we’ve detected in our OCM data sample can be applied to the general Medicare population, we have estimated that the introduction of biosimilars resulted in a $4.8 million in savings (1.39%) compared with what the total reimbursement would have been without biosimilars in the market in Q4 2018. This bending of the cost curve is projected to result in savings of $79.1M (5.7%) in 2019 and $157.9M (11.5%) in 2020. Importantly, most of this cost containment is not due to patients utilizing biosimilars. 90.6% of patients in Q2 2019 are still receiving branded pegfilgrastim. However, the introduction of biosimilars has caused even the branded agent to stabilize and possibly even drop net acquisition cost prices. Introduction of biosimilars has created enough pressure on the market to result in significant cost savings, increasing the overall value proposition of pegfilgrastim. This results in significant cost saving to CMS, and also makes it easier for practices participating in OCM to have successful financial outcomes.


2019 ◽  
Vol 51 (3) ◽  
pp. 320-324
Author(s):  
Sumedha Kulkarni ◽  
Dina Piraino ◽  
Rachel Strauss ◽  
Eva Proctor ◽  
Suzanne Waldman ◽  
...  

Abstract Background Preanalytical errors account for most laboratory errors. Although the frequencies of preanalytical errors are well characterized in the literature, little is known regarding the costs of these errors to the laboratory. Objective To analyze costs associated with preanalytical errors associated with the international normalized ratio (INR) test. Methods We performed a retrospective analysis of INR requests associated with preanalytical error codes from January 2009 through September 2013. Preanalytical error types were those related to order entry (no specimen collected) and those unrelated to order entry (insufficient specimen quantity or specimen-integrity concerns). We calculated the cost of analysis of a specimen and the cost of investigating errors. Results During the study period, there were 557,411 INR requests, 13.1% of which were associated with a preanalytical error code. The total annual cost of INR testing was USD $379,222.50. Investigation and reporting of preanalytical errors not related to order entry represented 10.5% of our annual INR testing budget (USD $39,939.00). Conclusions Minimizing preanalytical errors has the potential to result in significant cost savings.


Sign in / Sign up

Export Citation Format

Share Document