scholarly journals Development of edible films obtained from submicron emulsions based on whey protein concentrate, oil/beeswax and brea gum

2017 ◽  
Vol 23 (4) ◽  
pp. 371-381 ◽  
Author(s):  
Juan Pablo Cecchini ◽  
María J Spotti ◽  
Andrea M Piagentini ◽  
Viviana G Milt ◽  
Carlos R Carrara
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Zeta Potential ◽  
Whey Protein ◽  
Droplet Size ◽  
Lipid Fraction ◽  
Edible Films ◽  
Whey Protein Concentrate ◽  
Vapor Permeability ◽  
Protein Concentrate

Edible films with whey protein concentrate (WPC) with a lipid component, sunflower oil (O) or beeswax (W), to enhance barrier to water vapor were obtained. Brea gum was used as emulsifier and also as matrix component. In order to achieve emulsion with small and homogeneous droplet size, an ultrasonicator equipment was used after obtaining a pre-emulsion using a blender. The films were made by casting. Effects of lipid fraction on droplet size, zeta potential, mechanical properties, water vapor permeability (WVP), solubility, and optical properties were determined. The droplet size of emulsions with BG decreased when decreasing the lipid content in the formulation. The zeta potential was negative for all the formulations, since the pH was close to 6 for all of them and pI of BG is close to 2.5, and pI of ß-lactoglobulin and α-lactalbumin (main proteins in WPC) are 5.2 and 4.1, respectively. Increasing W or SO content in blended films reduced the tensile strength and puncture resistance significantly. BG and WPC films without lipid presented better mechanical properties. The presence of lipids decreased the WVP, as expected, and those films having BG improved this property. BG films were slightly amber as a result of the natural color of the gum. BG has shown to be a good polysaccharide for emulsifying the lipid fraction and improving the homogeneity and mechanical properties of the films with WPC and beeswax or oil.

scholarly journals Application of Whey Protein-Based Edible Films and Coatings in Food Industries: An Updated Overview

Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1056
Author(s):  
Sujatha Kandasamy ◽  
Jayeon Yoo ◽  
Jeonghee Yun ◽  
Han-Byul Kang ◽  
Kuk-Hwan Seol ◽  
...  
Keyword(s):  
Whey Protein ◽  
Food Packaging ◽  
Polymer Network ◽  
Water Vapor Permeability ◽  
Edible Films ◽  
Industrial Applications ◽  
Whey Protein Concentrate ◽  
Vapor Permeability ◽  
Active Ingredients ◽  
Processing Technologies

The recent surge in environmental awareness and consumer demand for stable, healthy, and safe foods has led the packaging and food sectors to focus on developing edible packaging materials to reduce waste. Edible films and coatings as a modern sustainable packaging solution offer significant potential to serve as a functional barrier between the food and environment ensuring food safety and quality. Whey protein is one of the most promising edible biopolymers in the food packaging industry that has recently gained much attention for its abundant nature, safety, and biodegradability and as an ecofriendly alternative of synthetic polymers. Whey protein isolate and whey protein concentrate are the two major forms of whey protein involved in the formation of edible films and coatings. An edible whey film is a dry, highly interacting polymer network with a three-dimensional gel-type structure. Films/coatings made from whey proteins are colorless, odorless, flexible, and transparent with outstanding mechanical and barrier properties compared with polysaccharide and other-protein polymers. They have high water vapor permeability, low tensile strength, and excellent oxygen permeability compared with other protein films. Whey protein-based films/coatings have been successfully demonstrated in certain foods as vehicles of active ingredients (antimicrobials, antioxidants, probiotics, etc.), without considerably altering the desired properties of packaging films that adds value for subsequent industrial applications. This review provides an overview of the recent advances on the formation and processing technologies of whey protein-based edible films/coatings, the incorporation of additives/active ingredients for improvement, their technological properties, and potential applications in food packaging.

Research on Preparation and Properties of Edible Composite Protein Films

2011 ◽  
Vol 87 ◽  
pp. 213-222 ◽  
Author(s):  
Gui Yun Chen ◽  
Qiao Lei
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Sodium Caseinate ◽  
Barrier Properties ◽  
Edible Films ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Protein Films

Edible films based on whey protein isolate and sodium caseinate were prepared by uniform design method. Glycerol has been incorporated into the edible films as a plasticizer. For all types of films, the influences of components and forming temperature on film properties, such as mechanical properties, water solubility, optical properties, gas and water vapor permeability were investigated. The results suggested that glycerol was the most important factor influencing all the properties of edible composite protein films. However, both increases of sodium caseinate concentration and glycerol content contributed to decrease the barrier properties of gas and water vapor. Among the films studied, group D (prepared with 5% whey protein isolate, 2% sodium caseinate, 50% glycerol at the temperature of 50 °C) showed moderate mechanical properties, optical properties, water solubility and maximum barrier properties of gas and water vapor, with tensile strength=5.85MPa, elongation=101.20%, transparency=91.4%, gas permeability rate=49.92cm3m-2d-10.1MPa-1and water vapor permeability of 0.128×10-11g m-1s-1Pa-1, 0.260×10-11g m-1s-1Pa-1, 0.513×10-11g m-1s-1Pa-1, 1.252×10-11g m-1s-1Pa-1at the RH gradient of 10-40%, 10-50%, 10-60%, 10-70%, respectively.

Sign in / Sign up

Export Citation Format

Share Document