Study on the shear wall structure with combined form of replaceable devices

2017 ◽  
Vol 21 (9) ◽  
pp. 1327-1348
Author(s):  
Cong Chen ◽  
Renjie Xiao ◽  
Xilin Lu ◽  
Yun Chen
Keyword(s):  
Shear Walls ◽  
Shear Wall ◽  
Performance Comparison ◽  
Wall Structure ◽  
Structural Part ◽  
Coupled Shear Wall ◽  
Wall Structures ◽  
Strength And Stiffness ◽  
Energy Dissipated ◽  
Resilient Structure

Structure with replaceable devices is a type of earthquake resilient structure developed to restore the structure immediately after strong earthquakes. Current researches focus on one type of the replaceable device located in the structural part that is most likely to be damaged; however, plastic deformation would not be limited in a specific part but expand to other parts. To concentrate possible damage in shear wall structures, combined form of replaceable devices was introduced in this article. Based on previous studies, combined form of replaceable coupling beam and replaceable wall foot was used in a coupled shear wall. Influences of the dimension and location of the replaceable devices to the strength and stiffness of the shear wall were investigated through numerical modeling, which was verified by experimental data. Performance comparison between the shear walls with one type and combined form of replaceable devices and the conventional coupled shear wall was performed. In general, the shear wall with combined form of replaceable devices is shown to be better energy dissipated, and proper dimensions and locations of the replaceable devices should be determined.

The Influence of Structural Damage on the Vibration Characteristics of Shear-Wall Buildings

2012 ◽  
Vol 193-194 ◽  
pp. 1216-1220 ◽  
Author(s):  
Kai Huang ◽  
Li Hua Zou ◽  
Jian Mei Chen
Keyword(s):  
Plastic Zone ◽  
Structural Damage ◽  
Pushover Analysis ◽  
Shear Walls ◽  
Shear Wall ◽  
Internal Force ◽  
Vibration Characteristics ◽  
Wall Structure ◽  
Wall Structures ◽  
The Continuum

To understand the higher modal effect on the accuracy of pushover analysis for shear wall structure, the influence of damage on the vibration characteristics of shear-wall structures is investigated. Employing the continuum technique, the shift of modal shapes and periods for the first three modes is obtained when the plastic zone exists in the bottom of the shear wall. It can be conclude that plastic zone may enhance the higher modal effect when the internal force responses of shear walls are considered. The higher modal contribution can not be neglected when computing the nonlinear earthquake responses of shear wall structures.

Optimization Design for Coupling Beam Dampers of Shear Walls

2013 ◽  
Vol 444-445 ◽  
pp. 115-121 ◽  
Author(s):  
Zhe Zhang ◽  
Jin Ping Ou ◽  
Zheng He
Keyword(s):  
Carrying Capacity ◽  
Optimization Design ◽  
Shear Walls ◽  
Shear Wall ◽  
Hysteretic Behavior ◽  
Coupling Beam ◽  
Kriging Surrogate Model ◽  
Coupled Shear Wall ◽  
Wall Structures ◽  
High Level

The couple shear wall structures are well known for their anti-lateral stability, they have a promising future in macro complex high-level structures. Coupling beam dampers are the key components of coupled shear wall structures. In this manuscript, metallic in plane yield coupling beam damper with four types of poration and different pore areas are analyzed by Finite Element Method. It is found that the hourglass-shaped poring coupling beam damper has superior hysteretic behavior and higher carrying capacity comparing to other types of poring damper. In addition, the optimized poration parameters are further obtained by using Kriging surrogate model, which maximize the carrying capacity and enhance hysteretic behavior of the hourglass-shaped coupling beam damper.

Variable-stiffness elastic base mechanism for model shear wall structures

1980 ◽  
Vol 15 (3) ◽  
pp. 145-149
Author(s):  
A Coull ◽  
N W Adams
Keyword(s):  
Three Dimensional ◽  
Variable Stiffness ◽  
Shear Wall ◽  
Elastic Base ◽  
Model Investigation ◽  
Wall Structure ◽  
Coupled Shear Wall ◽  
Simple Mechanism ◽  
Wall Structures ◽  
Base Mechanism

A description is given of a simple mechanism which was developed to simulate a system of variable-stiffness elastic base supports for a coupled shear wall structure. A system of cantilevers was used to enable both vertical and rotational base flexibilities to be provided, the two being independently variable over the required range of relative stilesses. An example is given of the use of the system in a model investigation of a three-dimensional shear wall structure.

scholarly journals EFFECT OF SHEAR WALL ON PERFORMANCE OF MULTISTOREY BUILDING

2020 ◽  
Vol 4 (5) ◽  
pp. 26-39
Author(s):  
MIRZA AAMIR BAIG ◽  
Rizwan Rashid
Keyword(s):  
Shear Walls ◽  
Shear Wall ◽  
Inertia Force ◽  
High Rise ◽  
Coupled Shear Wall ◽  
Wall Structures ◽  
Seismic Force ◽  
Structural Configurations ◽  
Seismic Forces ◽  
Physical Phenomena

Seismic force, predominantly being an inertia force depends on the mass of the structure. As the mass of the structure increases the seismic forces also increase causing the requirement of even heavier sections to counter that heavy forces. And these heavy sections further increase the mass of the structure leading to even heavier seismic forces. Structural designers are met with huge challenge to balance these contradictory physical phenomena to make the structure safe. The structure no more can afford to be rigid. This introduces the concept of ductility. The structures are made ductile, allowing it yield in order to dissipate the seismic forces. A framed structure can be easily made ductile by properly detailing of the reinforcement. But again, as the building height goes beyond a certain limit, these framed structure sections (columns) gets larger and larger to the extent that they are no more practically feasible in a structure. There comes the role of shear walls. Shear walls provide ample amount of stiffness to the building frame resisting loads through in plane bending. But they inherently make the structure stiffer. So, there must be a balance between the amount of shear walls and frame elements present in a structure for safe and economic design of high-rise structures. Here an attempt has been made to study the behavior of different structures of reinforced concrete with different heights with and without shear walls. Coupled shear walls have also been studied to understand the comparative merit or demerit of framed structures with shear wall structures. Studies have been carried out on sample model structures and analysis has been carried out by ETABS software. It has been ensured to consider sample models that represent the current practices in structural design to include different structural configurations. Models having varied structural configurations like framed, shear wall, coupled shear wall, central core shear wall, core in core etc. have been taken into consideration. The inherent asymmetry present in the structures have also been dealt. The results have been tabulated and plotted to study their comparative behavior and interaction with each other. The findings of the study have been summarized and discussed.

scholarly journals Experimental Comparison Study on Cyclic Behavior of Coupled Shear Walls with Two-Level-Yielding Steel Coupling Beam and RC Coupling Beam

2018 ◽  
Author(s):  
Guoqiang LI ◽  
Mengde PANG ◽  
Feifei Sun ◽  
Liulian LI ◽  
Jianyun SUN
Keyword(s):  
Energy Dissipation ◽  
Lateral Displacement ◽  
Shear Walls ◽  
Shear Wall ◽  
Cyclic Behavior ◽  
Experimental Comparison ◽  
Coupling Beam ◽  
Coupling Beams ◽  
Coupled Shear Wall ◽  
Steel Coupling Beam

Coupled shear walls are widely used in high rise buildings, since they can not only provide efficient lateral stiffness but also behave outstanding energy dissipation ability especially for earthquake-resistance. Traditionally, the coupling beams are made of reinforced concrete, which are prone to shear failure due to low aspect ratio and greatly reduce the efficiency and ability of energy dissipation.  For overcoming the shortcoming of concrete reinforced coupling beams (RCB), an innovative steel coupling beams called two-level-yielding steel coupling beam (TYSCB) is invented to balance the demand of stiffness and energy dissipation for coupled shear walls. TYSCBs are made of two parallel steel beams with yielding at two different levels.  To verify and investigate the aseismic behaviour improvement of TYSCB-coupled shear walls, two 1/3 scale, 10-storey coupled shear wall specimens with TYSCB and RCB were tested under both gravity and lateral displacement reversals. These two specimens were designed with the same bearing capacity, thus to be easier to compare. The experimental TYSCB specimen demonstrated more robust cyclic performance. Both specimens reached 1% lateral drift, however, the TYSCB-coupled shear wall showed minimal strength degradation. Additionally, a larger amount of energy was dissipated during each test of the TYSCB specimen, compared with the RCB specimen. Based on the experimental results, design recommendations are provided.

Experimental Evaluation of a Multi-Story Post-Tensioned Coupled Shear Wall Structure

2013 ◽  
Author(s):  
Michael J. McGinnis ◽  
Steven Barbachyn ◽  
Michelle R. Holloman ◽  
Yahya C. Kurama
Keyword(s):  
Experimental Evaluation ◽  
Shear Wall ◽  
Wall Structure ◽  
Coupled Shear Wall ◽  
Post Tensioned

Nonlinear Dynamic Analysis of Prefabricated Concrete Shear Wall Structure under Seismic Excitation

2017 ◽  
Vol 873 ◽  
pp. 259-263
Author(s):  
Hao Zhang ◽  
Zi Hang Zhang ◽  
Yong Qiang Li
Keyword(s):  
Finite Element ◽  
Kinematic Hardening ◽  
Nonlinear Dynamic Analysis ◽  
Shear Wall ◽  
Seismic Excitation ◽  
Wall Structure ◽  
Base Shear ◽  
Wall Structures ◽  
Story Drift

The dynamic behavior of the prefabricated and cast in situ concrete shear wall structures subjected to seismic loading is investigated by finite element method. This paper adopted a prefabricated concrete shear wall in a practical engineering. The Precise finite element models of prefabricated and cast in situ concrete shear wall were established respectively by ABAQUS. The damaged plasticity model of concrete and kinematic hardening model of reinforcing steel were used. The top displacement, top acceleration, story drift ratio and base shear forceof prefabricated and cast in situ concrete shear wall under different seismic excitation were compared and analyzed. The earthquake resistant behaviorsof the two kinds of structuresare analyzed and compared. Results show that the performances of PC structure were equal to the cast-in-situ ones.

scholarly journals Experimental Study and Numerical Simulation on Hybrid Coupled Shear Wall with Replaceable Coupling Beams

2019 ◽  
Vol 11 (3) ◽  
pp. 867
Author(s):  
Yun Chen ◽  
Junzuo Li ◽  
Zheng Lu
Keyword(s):  
Shear Walls ◽  
Shear Wall ◽  
Response Strength ◽  
Middle Part ◽  
Coupling Beam ◽  
Coupling Beams ◽  
Element Analysis ◽  
Retention Capacity ◽  
Coupled Shear Wall ◽  
Replaceable Fuse

The coupled shear wall with replaceable coupling beams is a current research hotspot, while still lacking comprehensive studies that combine both experimental and numerical approaches to describe the global performance of the structural system. In this paper, hybrid coupled shear walls (HSWs) with replaceable coupling beams (RCBs) are studied. The middle part of the coupling beam is replaced with a replaceable “fuse”. Four ½-scale coupled shear wall specimens including a conventional reinforced concrete shear wall (CSW) and three HSWs (F1SW/F2SW/F3SW) with different kinds of replaceable “fuses” (Fuse 1/Fuse 2/Fuse 3) are tested through cyclic loading. Fuse 1 is an I-shape steel with a rhombic opening at the web; Fuse 2 is a double-web I-shape steel with lead filled in the gap between the two webs; Fuse 3 consists of two parallel steel tubes filled by lead. The comparison of seismic properties of the four shear walls in terms of failure mechanism, hysteretic response, strength degradation, stiffness degradation, energy consumption, and strain response is presented. The nonlinear finite element analysis of four shear walls is conducted by ABAQUS software. The deformation process, yielding sequence of components, skeleton curves, and damage distribution of the walls are simulated and agree well with the experimental results. The primary benefit of HSWs is that the damage of the coupling beam is concentrated at the replaceable “fuse”, while other parts remain intact. Besides, because the “fuse” can dissipate much energy, the damage of the wall-piers is also alleviated. In addition, among the three HSWs, F1SW possesses the best ductility and load retention capacity while F2SW possesses the best energy dissipation capacity. Based on this comprehensive study, some suggestions for the conceptual design of HSWs are further proposed.

Sign in / Sign up

Export Citation Format

Share Document