Quantification of aerodynamic forces for truss bridge-girders based on wind tunnel test and kriging surrogate model

2021 ◽  
pp. 136943322199249
Author(s):  
Huan Li ◽  
Xuhui He ◽  
Liang Hu ◽  
Guoji Xu
Keyword(s):  
Wind Tunnel ◽  
Surrogate Model ◽  
High Speed ◽  
Aerodynamic Force ◽  
Wind Tunnel Test ◽  
Geometric Parameters ◽  
Bridge Girders ◽  
Kriging Surrogate Model ◽  
Bridge Girder ◽  
Truss Bridge

This study presents an investigation to quantify the aerodynamics of truss bridge-girders via wind tunnel test and kriging surrogate model. Currently, the conventional methods documented in design specifications only take into consideration the mean drag force at null attack angle. To gain an in-depth understanding on the aerodynamics of truss bridge-girders, experiments on simplified bridge-girder models with various geometric parameters were carried out in uniform flow. A total of 15 truss bridge-girder models with aspect ratio (the ratio of width to height) B/D = 1.0, 1.3, 1.6, 1.9, and 2.2, solidity ratio (the ratio of projected to envelope areas) Φ = 0.20, 0.25, 0.30, 0.35, and 0.40, and two typical truss topologies (Warren and Pratt trusses) were examined in the most concerned range of wind angle of attack α = [–6°, 6°]. These truss bridge-girder models cover most of the high-speed railway bridges widely used in China. Experimental results show that the truss topology has limited effects on the aerodynamics of truss bridge-girders, whereas the effects of α, B/D, and Φ are significant. Based on these wind tunnel results, the ordinary kriging surrogate model was utilized to approximate the aerodynamics of truss bridge-girders. In using this model, aerodynamic force values for test cases can be interpolated with zero variance and uncertainties in unsampled design zones where geometric parameters can be quantified with Gaussian variance.

Experimental Studies on Aerodynamic Characteristics of Pantograph System According to the Pantograph Cover Configurations for High Speed Train

2011 ◽  
Author(s):  
Yeongbin Lee ◽  
Minho Kwak ◽  
Kyu Hong Kim ◽  
Dong-Ho Lee
Keyword(s):  
Wind Tunnel ◽  
High Speed ◽  
Aerodynamic Drag ◽  
Aerodynamic Force ◽  
Experimental Studies ◽  
Wind Tunnel Test ◽  
Aerodynamic Characteristics ◽  
Experimental Models ◽  
High Speed Train ◽  
Drag And Lift

In this study, the aerodynamic characteristics of pantograph system according to the pantograph cover configurations for high speed train were investigated by wind tunnel test. Wind tunnel tests were conducted in the velocity range of 20∼70m/s with scaled experimental pantograph models. The experimental models were 1/4 scaled simplified pantograph system which consists of a double upper arm and a single lower arm with a square cylinder shaped panhead. The experimental model of the pantograph cover is also 1/4 scaled and were made as 4 different configurations. It is laid on the ground plate which modeled on the real roof shape of the Korean high speed train. Using a load cell, the aerodynamic force such as a lift and a drag which were acting on pantograph system were measured and the aerodynamic effects according to the various configurations of pantograph covers were investigated. In addition, the total pressure distributions of the wake regions behind the panhead of the pantograph system were measured to investigate the variations of flow pattern. From the experimental test results, we checked that the flow patterns and the aerodynamic characteristics around the pantograph systems are varied as the pantograph cover configurations. In addition, it is also found that pantograph cover induced to decrease the aerodynamic drag and lift forces. Finally, we proposed the aerodynamic improvement of pantograph cover and pantograph system for high speed train.

1030 Development of Wind Tunnel Test Technique for Evaluation of Tail Car Oscillation Caused by Aerodynamic Force in High-Speed Train

2007 ◽  
Vol 2007.82 (0) ◽  
pp. _10-30_
Author(s):  
Ken-taro NAKAGAWA ◽  
Ryo NOMURA ◽  
Hideki KAWAMOTO ◽  
Kazuto NAKAI ◽  
Hirofumi YAMAMORI
Keyword(s):  
Wind Tunnel ◽  
High Speed ◽  
Aerodynamic Force ◽  
Wind Tunnel Test ◽  
High Speed Train ◽  
Test Technique

Sailing Yacht Rig Improvements Through Viscous Computational Fluid Dynamics

2005 ◽  
Author(s):  
Vincent G. Chapin ◽  
Romaric Neyhousser ◽  
Stephane Jamme ◽  
Guillaume Dulliand ◽  
Patrick Chassaing
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
High Speed ◽  
Stokes Equations ◽  
Wind Tunnel Test ◽  
Physical Modelling ◽  
Optimized Design ◽  
Linear Interaction ◽  
Sailing Yacht

In this paper we propose a rational viscous Computational Fluid Dynamics (CFD) methodology applied to sailing yacht rig aerodynamic design and analysis. After an outlook of present challenges in high speed sailing, we emphasized the necessity of innovation and CFD to conceive, validate and optimize new aero-hydrodynamic concepts. Then, we present our CFD methodology through CAD, mesh generation, numerical and physical modelling choices, and their validation on typical rig configurations through wind-tunnel test comparisons. The methodology defined, we illustrate the relevance and wide potential of advanced numerical tools to investigate sailing yacht rig design questions like the relation between sail camber, propulsive force and aerodynamic finesse, and like the mast-mainsail non linear interaction. Through these examples, it is shown how sailing yacht rig improvements may be drawn by using viscous CFD based on Reynolds Averaged Navier-Stokes equations (RANS). Then the extensive use of viscous CFD, rather than wind-tunnel tests on scale models, for the evaluation or ranking of improved designs with increased time savings. Viscous CFD methodology is used on a preliminary study of the complex and largely unknown Yves Parlier Hydraplaneur double rig. We show how it is possible to increase our understanding of his flow physics with strong sail interactions, and we hope this methodology will open new roads toward optimized design. Throughout the paper, the necessary comparison between CFD and wind-tunnel test will be presented to focus on limitations and drawbacks of viscous CFD tools, and to address future improvements.

Videogrammetric Techniques for Wind Tunnel Testing and Applications

2014 ◽  
Vol 986-987 ◽  
pp. 1629-1633
Author(s):  
Zheng Yu Zhang ◽  
Xu Hui Huang ◽  
Jiang Yin ◽  
Han Xuan Lai
Keyword(s):  
Wind Tunnel ◽  
Wave Front ◽  
High Speed ◽  
Marked Point ◽  
Wind Tunnel Test ◽  
Wind Tunnels ◽  
Test Model ◽  
Wind Tunnel Testing ◽  
Section Size ◽  
Key Techniques

Videogrammetric measurement is a research focus for the organizations of wind tunnel test because of its no special requirements on the test model, its key techniques for the vibration environment of the high speed wind tunnel are introduced by this paper, such as the solution of exterior parameters with big-angle large overlap, the algorithm of image processing for extracting marked point, the method of camera calibration and wave-front distortion field measurement. The great requirements and application prospects of videogrammetry in wind tunnel fine testing have been demonstrated by several practice experiments, including to measure test model’s angle of attack, dynamic deformations and wave-front distortion field in high speed wind tunnels whose test section size is 2 meters.

Workspace analysis and verification of cable-driven parallel mechanism for wind tunnel test

2016 ◽  
Vol 231 (6) ◽  
pp. 1012-1021 ◽  
Author(s):  
Xiaoguang Wang ◽  
Yunbo Hu ◽  
Qi Lin
Keyword(s):  
Wind Tunnel ◽  
Parallel Mechanism ◽  
Aerodynamic Force ◽  
Wind Tunnel Test ◽  
Special Kind ◽  
Parallel Robot ◽  
System Construction ◽  
Vector Projection ◽  
Workspace Analysis ◽  
Projection Strategy

Cable-driven parallel mechanism is a special kind of parallel robot in which traditional rigid links are replaced by actuated cables. This provides a new suspension method for wind tunnel test, in which an aircraft model is driven by a number of parallel cables to fulfil 6-DOF motion. The workspace of such a cable robot is limited due to the geometrical and unilateral force constraints, the investigation of which is important for applications requiring large flight space. This paper focuses on the workspace analysis and verification of a redundant constraint 6-DOF cable-driven parallel suspension system. Based on the system motion and dynamic equations, the geometrical interference (either intersection between two cables or between a cable and the aircraft) and cable tension restraint conditions are constructed and analyzed. The hyperplane vector projection strategy is used to solve the aircraft’s orientation and position workspace. Moreover, software ADAMS is used to check the workspace, and experiments are done on the prototype, which adopts a camera to monitor the actual motion space. In addition, the system construction is designed by using a built-in six-component balance to measure the aerodynamic force. The results of simulation and tests show a good consistency, which means that the restraint conditions and workspace solution strategy are valid and can be used to provide guidance for the cable-driven parallel suspension system’s application in wind tunnel tests.

Sign in / Sign up

Export Citation Format

Share Document