scholarly journals Compressive-sensing data reconstruction for structural health monitoring: a machine-learning approach

2019 ◽  
Vol 19 (1) ◽  
pp. 293-304 ◽  
Author(s):  
Yuequan Bao ◽  
Zhiyi Tang ◽  
Hui Li
Keyword(s):  
Machine Learning ◽  
Structural Health Monitoring ◽  
Compressive Sensing ◽  
Health Monitoring ◽  
Applied Mathematics ◽  
Modal Identification ◽  
Data Reconstruction ◽  
Wireless Data ◽  
Sensing Data ◽  
Structural Health

Compressive sensing has been studied and applied in structural health monitoring for data acquisition and reconstruction, wireless data transmission, structural modal identification, and spare damage identification. The key issue in compressive sensing is finding the optimal solution for sparse optimization. In the past several years, many algorithms have been proposed in the field of applied mathematics. In this article, we propose a machine learning–based approach to solve the compressive-sensing data-reconstruction problem. By treating a computation process as a data flow, the solving process of compressive sensing–based data reconstruction is formalized into a standard supervised-learning task. The prior knowledge, i.e. the basis matrix and the compressive sensing–sampled signals, is used as the input and the target of the network; the basis coefficient matrix is embedded as the parameters of a certain layer; and the objective function of conventional compressive sensing is set as the loss function of the network. Regularized by l1-norm, these basis coefficients are optimized to reduce the error between the original compressive sensing–sampled signals and the masked reconstructed signals with a common optimization algorithm. In addition, the proposed network is able to handle complex bases, such as a Fourier basis. Benefiting from the nature of a multi-neuron layer, multiple signal channels can be reconstructed simultaneously. Meanwhile, the disassembled use of a large-scale basis makes the method memory-efficient. A numerical example of multiple sinusoidal waves and an example of field-test wireless data from a suspension bridge are carried out to illustrate the data-reconstruction ability of the proposed approach. The results show that high reconstruction accuracy can be obtained by the machine learning–based approach. In addition, the parameters of the network have clear meanings; the inference of the mapping between input and output is fully transparent, making the compressive-sensing data-reconstruction neural network interpretable.

scholarly journals Structural Health Monitoring Using Machine Learning and Cumulative Absolute Velocity Features

2021 ◽  
Vol 11 (12) ◽  
pp. 5727
Author(s):  
Sifat Muin ◽  
Khalid M. Mosalam
Keyword(s):  
Machine Learning ◽  
Logistic Regression ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Degree Of Freedom ◽  
Absolute Velocity ◽  
Support Vector ◽  
Damage State ◽  
Structural Health ◽  
Cumulative Absolute Velocity

Machine learning (ML)-aided structural health monitoring (SHM) can rapidly evaluate the safety and integrity of the aging infrastructure following an earthquake. The conventional damage features used in ML-based SHM methodologies face the curse of dimensionality. This paper introduces low dimensional, namely, cumulative absolute velocity (CAV)-based features, to enable the use of ML for rapid damage assessment. A computer experiment is performed to identify the appropriate features and the ML algorithm using data from a simulated single-degree-of-freedom system. A comparative analysis of five ML models (logistic regression (LR), ordinal logistic regression (OLR), artificial neural networks with 10 and 100 neurons (ANN10 and ANN100), and support vector machines (SVM)) is performed. Two test sets were used where Set-1 originated from the same distribution as the training set and Set-2 came from a different distribution. The results showed that the combination of the CAV and the relative CAV with respect to the linear response, i.e., RCAV, performed the best among the different feature combinations. Among the ML models, OLR showed good generalization capabilities when compared to SVM and ANN models. Subsequently, OLR is successfully applied to assess the damage of two numerical multi-degree of freedom (MDOF) models and an instrumented building with CAV and RCAV as features. For the MDOF models, the damage state was identified with accuracy ranging from 84% to 97% and the damage location was identified with accuracy ranging from 93% to 97.5%. The features and the OLR models successfully captured the damage information for the instrumented structure as well. The proposed methodology is capable of ensuring rapid decision-making and improving community resiliency.

scholarly journals Application of Machine Learning with Impedance Based Techniques for Structural Health Monitoring of Civil Infrastructure

2019 ◽  
Vol 8 (6S4) ◽  
pp. 1139-1148
Keyword(s):  
Machine Learning ◽  
Signal Processing ◽  
Structural Health Monitoring ◽  
Damage Detection ◽  
Soft Computing ◽  
Health Monitoring ◽  
Multiple Cracks ◽  
Civil Infrastructure ◽  
Structural Health ◽  
Soft Computing Techniques

Increased attentiveness on the environmental and effects of aging, deterioration and extreme events on civil infrastructure has created the need for more advanced damage detection tools and structural health monitoring (SHM). Today, these tasks are performed by signal processing, visual inspection techniques along with traditional well known impedance based health monitoring EMI technique. New research areas have been explored that improves damage detection at incipient stage and when the damage is substantial. Addressing these issues at early age prevents catastrophe situation for the safety of human lives. To improve the existing damage detection newly developed techniques in conjugation with EMI innovative new sensors, signal processing and soft computing techniques are discussed in details this paper. The advanced techniques (soft computing, signal processing, visual based, embedded IOT) are employed as a global method in prediction, to identify, locate, optimize, the damage area and deterioration. The amount and severity, multiple cracks on civil infrastructure like concrete and RC structures (beams and bridges) using above techniques along with EMI technique and use of PZT transducer. In addition to survey advanced innovative signal processing, machine learning techniques civil infrastructure connected to IOT that can make infrastructure smart and increases its efficiency that is aimed at socioeconomic, environmental and sustainable development.

Enhancing Vibration-Based Structural Health Monitoring via Edge Computing: A Tiny Machine Learning Perspective

2021 ◽  
Author(s):  
Federica Zonzini ◽  
Francesca Romano ◽  
Antonio Carbone ◽  
Matteo Zauli ◽  
Luca De Marchi
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Network Architecture ◽  
Binary Classification ◽  
Low Cost ◽  
Classification Problems ◽  
Computationally Efficient ◽  
Structural Health

Abstract Despite the outstanding improvements achieved by artificial intelligence in the Structural Health Monitoring (SHM) field, some challenges need to be coped with. Among them, the necessity to reduce the complexity of the models and the data-to-user latency time which are still affecting state-of-the-art solutions. This is due to the continuous forwarding of a huge amount of data to centralized servers, where the inference process is usually executed in a bulky manner. Conversely, the emerging field of Tiny Machine Learning (TinyML), promoted by the recent advancements by the electronic and information engineering community, made sensor-near data inference a tangible, low-cost and computationally efficient alternative. In line with this observation, this work explored the embodiment of the One Class Classifier Neural Network, i.e., a neural network architecture solving binary classification problems for vibration-based SHM scenarios, into a resource-constrained device. To this end, OCCNN has been ported on the Arduino Nano 33 BLE Sense platform and validated with experimental data from the Z24 bridge use case, reaching an average accuracy and precision of 95% and 94%, respectively.

scholarly journals Structural Health Monitoring using Varied Machine Learning Algorithms

2018 ◽  
Vol 7 (3.12) ◽  
pp. 793 ◽  
Author(s):  
B Shanthi ◽  
Mahalakshmi N ◽  
Shobana M
Keyword(s):  
Machine Learning ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Naive Bayes ◽  
Learning Algorithms ◽  
Naïve Bayes ◽  
Machine Learning Algorithms ◽  
Classification Algorithms ◽  
Structural Health

Structural Health Monitoring is essential in today’s world where large amount of money and labour are involved in building a structure. There arises a need to periodically check whether the built structure is strong and flawless, also how long it will be strong and if not how much it is damaged. These information are needed so that the precautions can be made accordingly. Otherwise, it may result in disastrous accidents which may take away even human lives. There are various methods to evaluate a structure. In this paper, we apply various classification algorithms like J48, Naive Bayes and many other classifiers available, to the dataset to check on the accuracy of the prediction determined by all of these classification algorithms and ar-rive at the conclusion of the best possible classifier to say whether a structure is damaged or not.  

scholarly journals Machine learning at the interface of structural health monitoring and non-destructive evaluation

2020 ◽  
Vol 378 (2182) ◽  
pp. 20190581
Author(s):  
P. Gardner ◽  
R. Fuentes ◽  
N. Dervilis ◽  
C. Mineo ◽  
S.G. Pierce ◽  
...  
Keyword(s):  
Machine Learning ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Ultrasonic Inspection ◽  
Guided Wave ◽  
Structural Health ◽  
Non Destructive Evaluation ◽  
Ultrasonic Guided Wave ◽  
Detection And Identification ◽  
Non Destructive

While both non-destructive evaluation (NDE) and structural health monitoring (SHM) share the objective of damage detection and identification in structures, they are distinct in many respects. This paper will discuss the differences and commonalities and consider ultrasonic/guided-wave inspection as a technology at the interface of the two methodologies. It will discuss how data-based/machine learning analysis provides a powerful approach to ultrasonic NDE/SHM in terms of the available algorithms, and more generally, how different techniques can accommodate the very substantial quantities of data that are provided by modern monitoring campaigns. Several machine learning methods will be illustrated using case studies of composite structure monitoring and will consider the challenges of high-dimensional feature data available from sensing technologies like autonomous robotic ultrasonic inspection. This article is part of the theme issue ‘Advanced electromagnetic non-destructive evaluation and smart monitoring’.

scholarly journals Connecting concrete technology and machine learning: proposal for application of ANNs and CNT/concrete composites in structural health monitoring

RSC Advances ◽  
2020 ◽  
Vol 10 (39) ◽  
pp. 23038-23048
Author(s):  
Sofija Kekez ◽  
Jan Kubica
Keyword(s):  
Machine Learning ◽  
Carbon Nanotube ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Large Scale ◽  
Concrete Structures ◽  
Concrete Technology ◽  
Structural Health

Carbon nanotube/concrete composite possesses piezoresistivity i.e. self-sensing capability of concrete structures even in large scale.

scholarly journals Wireless Sensor Networks Composed of Standard Microcomputers and Smartphones for Applications in Structural Health Monitoring

Sensors ◽  
2019 ◽  
Vol 19 (9) ◽  
pp. 2070 ◽  
Author(s):  
Guido Morgenthal ◽  
Jan Frederick Eick ◽  
Sebastian Rau ◽  
Jakob Taraben
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Structural Health Monitoring ◽  
Data Acquisition ◽  
Health Monitoring ◽  
Modal Identification ◽  
System Level ◽  
Wireless Sensor ◽  
Raspberry Pi ◽  
Structural Health

Wireless sensor networks have attracted great attention for applications in structural health monitoring due to their ease of use, flexibility of deployment, and cost-effectiveness. This paper presents a software framework for WiFi-based wireless sensor networks composed of low-cost mass market single-board computers. A number of specific system-level software components were developed to enable robust data acquisition, data processing, sensor network communication, and timing with a focus on structural health monitoring (SHM) applications. The framework was validated on Raspberry Pi computers, and its performance was studied in detail. The paper presents several characteristics of the measurement quality such as sampling accuracy and time synchronization and discusses the specific limitations of the system. The implementation includes a complementary smartphone application that is utilized for data acquisition, visualization, and analysis. A prototypical implementation further demonstrates the feasibility of integrating smartphones as data acquisition nodes into the network, utilizing their internal sensors. The measurement system was employed in several monitoring campaigns, three of which are documented in detail. The suitability of the system is evaluated based on comparisons of target quantities with reference measurements. The results indicate that the presented system can robustly achieve a measurement performance commensurate with that required in many typical SHM tasks such as modal identification. As such, it represents a cost-effective alternative to more traditional monitoring solutions.

Sign in / Sign up

Export Citation Format

Share Document