scholarly journals Nonlinear vortex-induced vibration dynamics of a flexible pipe conveying two-phase flow

2019 ◽  
Vol 11 (10) ◽  
pp. 168781401988192
Author(s):  
Wenwu Yang ◽  
Xueping Chang ◽  
Ruyi Gou
Keyword(s):  
Natural Frequencies ◽  
Two Phase Flow ◽  
Volume Fraction ◽  
Phase Flow ◽  
Flexible Riser ◽  
Two Phase ◽  
Frequency Spectra ◽  
Vortex Induced Vibration ◽  
Vibration Prediction ◽  
Synchronization Region

In this article, a vortex-induced vibration prediction model of a flexible riser conveying two-phase flow, including geometric and hydrodynamic nonlinearity, is established. A van der Pol wake oscillator is utilized to characterize the fluctuating lift forces. The finite element method is chosen to solve the coupled nonlinear fluid–structure interaction equations. The natural frequencies of the flexible riser are calculated to validate the method through comparisons with results from the literature. The modal analyses show that geometric nonlinearity has a significant effect on the natural frequency, and the critical internal velocity is reduced than those in linear analyses. The impacts of the gas volume fraction as functions of cross-flow velocity on the synchronization region, the displacement amplitudes, and the maximum stresses and frequency spectra have been investigated. The results show that an increase in the gas fraction results in the linear increase in natural frequencies and a wider synchronization region, and an increase in liquid flow rate led to the slight decrease in displacement amplitude and maximum stress within a small flow range.

Eulerian Two-Phase Flow Modeling of Steam Direct Contact Condensation for the Fukushima Accident Investigation

2014 ◽  
Author(s):  
Marco Pellegrini ◽  
Giulia Agostinelli ◽  
Hidetoshi Okada ◽  
Masanori Naitoh
Keyword(s):  
Two Phase Flow ◽  
Volume Fraction ◽  
Fluid Model ◽  
Fluid Dynamic ◽  
Interfacial Region ◽  
Phase Flow ◽  
Two Phase ◽  
Fukushima Accident ◽  
Average Cell Size ◽  
Average Cell

Steam condensation is characterized by a relatively large interfacial region between gas and liquid which, in computational fluid dynamic (CFD) analyses, allows the creation of a discretized domain whose average cell size is larger than the interface itself. For this reason generally one fluid model with interface tracking (e.g. volume of fluid method, VOF) is employed for its solution in CFD, since the solution of the interface requires a reasonable amount of cells, reducing the modeling efforts. However, for some particular condensation applications, requiring the computation of long transients or the steam ejected through a large number of holes, one-fluid model becomes computationally too expensive for providing engineering information, and a two-fluid model (i.e. Eulerian two-phase flow) is preferable. Eulerian two-phase flow requires the introduction of closure terms representing the interactions between the two fluids in particular, in the condensation case, drag and heat transfer. Both terms involve the description of the interaction area whose definition is different from the typical one adopted in the boiling analyses. In the present work a simple but effective formulation for the interaction area is given based on the volume fraction gradient and then applied to a validation test case of steam bubbling in various subcooling conditions. It has been shown that this method gives realistic values of bubble detachment time, bubble penetration for the cases of interest in the nuclear application and in the particular application to the Fukushima Daiichi accident.

Numerical Investigation of Two-Phase Flow Over Unglazed Plate Collector Covered With Porous Material of Wire Screen for Solar Water Heater Application

2018 ◽  
Vol 141 (3) ◽  
Author(s):  
T. Salameh ◽  
Y. Zurigat ◽  
A. Badran ◽  
C. Ghenai ◽  
M. El Haj Assad ◽  
...  
Keyword(s):  
Surface Tension ◽  
Porous Material ◽  
Water Flow ◽  
Two Phase Flow ◽  
Volume Fraction ◽  
Phase Flow ◽  
Two Phase ◽  
Solar Water ◽  
Wire Screen ◽  
Effect Of Surface

This paper presents three-dimensional numerical simulation results of the effect of surface tension on two-phase flow over unglazed collector covered with a wire screen. The homogenous model is used to simulate the flow with and without the effect of porous material of wire screen and surface tension. The Eulerian-Eulerian multiphase flow approach was used in this study. The phases are completely stratified, the interphase is well defined (free surface flow), and interphase transfer rate is very large. The liquid–solid interface, gas–liquid interface, and the volume fraction for both phases were considered as boundaries for this model. The results show that the use of porous material of wire screen will reduce the velocity of water flow and help the water flow to distribute evenly over unglazed plate collector. The possibility of forming any hot spot region on the surface was reduced. The water velocity with the effect of surface tension was found higher than the one without this effect, due to the extra momentum source added by surface tension in longitudinal direction. The use of porous material of wires assures an evenly distribution flow velocity over the inclined plate, therefore helps a net enhancement of heat transfer mechanism for unglazed solar water collector application.

scholarly journals Modeling of Two-Phase Flow in Rough-Walled Fracture Using Level Set Method

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Yunfeng Dai ◽  
Zhifang Zhou ◽  
Jin Lin ◽  
Jiangbo Han
Keyword(s):  
Crude Oil ◽  
Level Set Method ◽  
Level Set ◽  
Two Phase Flow ◽  
Volume Fraction ◽  
Contact Angles ◽  
Immiscible Fluids ◽  
Water Volume ◽  
Phase Flow ◽  
Two Phase

To describe accurately the flow characteristic of fracture scale displacements of immiscible fluids, an incompressible two-phase (crude oil and water) flow model incorporating interfacial forces and nonzero contact angles is developed. The roughness of the two-dimensional synthetic rough-walled fractures is controlled with different fractal dimension parameters. Described by the Navier–Stokes equations, the moving interface between crude oil and water is tracked using level set method. The method accounts for differences in densities and viscosities of crude oil and water and includes the effect of interfacial force. The wettability of the rough fracture wall is taken into account by defining the contact angle and slip length. The curve of the invasion pressure-water volume fraction is generated by modeling two-phase flow during a sudden drainage. The volume fraction of water restricted in the rough-walled fracture is calculated by integrating the water volume and dividing by the total cavity volume of the fracture while the two-phase flow is quasistatic. The effect of invasion pressure of crude oil, roughness of fracture wall, and wettability of the wall on two-phase flow in rough-walled fracture is evaluated.

scholarly journals Numerical and experimental studies of gas–liquid flow and pressure drop in multiphase pump valves

2020 ◽  
Vol 103 (3) ◽  
pp. 003685042094088
Author(s):  
Yi Ma ◽  
Minjia Zhang ◽  
Huashuai Luo
Keyword(s):  
Pressure Drop ◽  
Two Phase Flow ◽  
Volume Fraction ◽  
Test System ◽  
Ball Valve ◽  
Phase Flow ◽  
Two Phase ◽  
Pressure Drops ◽  
Disk Valve ◽  
Predicted Values

A numerical and experimental study was carried out to investigate the two-phase flow fields of the typical three valves used in the multiphase pumps. Under the gas volume fraction conditions in the range of 0%–100%, the three-dimensional steady and dynamic two-phase flow characteristics, pressure drops, and their multipliers of the ball valve, cone valve, and disk valve were studied, respectively, using Eulerian–Eulerian approach and dynamic grid technique in ANSYS FLUENT. In addition, a valve test system was built to verify the simulated results by the particle image velocimetry and pressure test. The flow coefficient CQ (about 0.989) of the disk valve is greater than those of the other valves (about 0.864) under the steady flow with a high Reynolds number. The two-phase pressure drops of the three valves fluctuate in different forms with the vibration of the cores during the dynamic opening. The two-phase multipliers of the fully opened ball valve are consistent with the predicted values of the Morris model, while those of the cone valve and disk valve had the smallest differences with the predicted values of the Chisholm model. Through the comprehensive analysis of the flow performance, pressure drop, and dynamic stability of the three pump valves, the disk valve is found to be more suitable for the multiphase pumps due to its smaller axial space, resistance loss, and better flow capacity.

Water Volume Fraction Estimation in Two-Phase Flow Based on Electrical Capacitance Tomometry

2018 ◽  
Vol 18 (16) ◽  
pp. 6822-6835 ◽  
Author(s):  
Francisco R. Moreira da Mota ◽  
Daniel J. Pagano ◽  
Marina Enricone Stasiak
Keyword(s):  
Two Phase Flow ◽  
Volume Fraction ◽  
Water Volume ◽  
Phase Flow ◽  
Electrical Capacitance ◽  
Two Phase ◽  
Water Volume Fraction

scholarly journals Steam Volume Fraction in Two Phase Flow, (II)

1968 ◽  
Vol 10 (5) ◽  
pp. 238-243 ◽  
Author(s):  
Itaru MICHIYOSHI ◽  
Akimi SERIZAWA ◽  
Shinji MITANI
Keyword(s):  
Two Phase Flow ◽  
Volume Fraction ◽  
Phase Flow ◽  
Two Phase

scholarly journals Analysis of Oil-Air Two-Phase Flow Characteristics inside a Ball Bearing with Under-Race Lubrication

Processes ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 1223
Author(s):  
Heyun Bao ◽  
Xiaonan Hou ◽  
Fengxia Lu
Keyword(s):  
Ball Bearing ◽  
Two Phase Flow ◽  
Volume Fraction ◽  
Flow Characteristics ◽  
Lubricating Oil ◽  
Phase Flow ◽  
Two Phase ◽  
Inlet Velocity ◽  
Oil Supply ◽  
Circumferential Distribution

Under-race lubrication can increase the amount of lubricating oil entering a bearing and greatly improve lubrication and cooling effects. The oil-air two-phase flow characteristics inside a ball bearing with under-race lubrication play a key role in lubrication and cooling performance. The motions of ball bearing subassemblies are complicated. Ball spin affects the oil volume fraction. In this paper, the coupled level set volume of fluid (CLSVOF) method is used to track the oil-air two-phase flow inside the ball bearing with under-race lubrication. The influence of various factors on the oil volume fraction inside the ball bearing with under-race lubrication is investigated, particularly rotating speeds, inlet velocity and the size of oil supply apertures under the inner ring. The influence of the ball spinning is analyzed separately. The result demonstrates that, on account of the centrifugal force, lubricating oil is located more on the outer ring raceway at rotational speeds of 5000 r/min, 10,000 r/min, 15,000 r/min and 20,000 r/min. The oil volume fraction inside the bearing gradually increases at an oil inlet velocity of 5 m/s, 10 m/s and 15 m/s. The circumferential distribution of oil is also similar. As the diameter of the oil supply aperture increases from 1.5 mm to 2 mm, the oil volume fraction increases inside the ball bearing. However, the oil volume fraction slightly decreases from 2 mm to 2.5 mm of oil supply aperture diameter. Ball spin does not affect the circumferential distribution trend of the lubricating oil, but slightly reduces the oil volume fraction. Furthermore, ball spin causes the surface fluid to rotate around its rotation axis and increases the speed.

Sign in / Sign up

Export Citation Format

Share Document