scholarly journals Automatic cell identification and enrichment in lung cancer. II. Acridine orange for cell sorting of sputum.

1979 ◽  
Vol 27 (1) ◽  
pp. 552-556 ◽  
Author(s):  
H W Tyrer ◽  
J F Golden ◽  
M H Vansickel ◽  
C K Echols ◽  
J K Frost ◽  
...  

Fluorescence spectra were obtained from cells from sputum and pleural effusions stained with different fluorescent dyes and fixed by alternate methods. The spectra were referenced to a standard allowing for fluorescence comparisons of unstained and stained cells under various conditions. The metachromasia of acridine orange-stained cells offers nuclear/cytoplasmic differentiation in a single stain; mithramycin and propidium iodide do not. Unstained cells have an appreciable amount of green (546 nm) fluorescence, as does Carbowax in Saccomanno's preservative. Cytoplasm stained with acidine orange also has appreciable green fluorescence. Consequently, cells with much cytoplasm have high total fluorescence. Cytoplasmic fluorescence is negligible with mithramycin or propidium iodide. The metachromasia of acridine orange-stained cells is altered by alcohol and Carbowax levels in fixatives, keeping other factors constant.

1971 ◽  
Vol 17 (2) ◽  
pp. 171-174 ◽  
Author(s):  
Jose Menezes

By using the acridine orange staining technique a green fluorescence, characteristic of double-stranded nucleic acid, can be observed with purified preparations of mycobacteriophage C2 and its extracted nucleic acid. DNAse-treated samples do not show this fluorescence, which leads to the conclusion that this fluorescence is associated with phage DNA. Examination of preparations of phage grown in the presence of acridine orange supported these results.


Author(s):  
Fairooz Kareem ◽  
Mahasin Al-Kadhemy ◽  
Asrar Saeed

Absorption and fluorescence spectroscopy techniques were applied to investigate the photophysical characteristics of acridine orange (AO) dye in solvents that included distilled water, dimethyl sulfoxide (DMSO), acetone and ethanol in various concentrations (1×10-4–1×10-6) M. All of the samples were served at room temperature. The relationships between various parameters describing the strength of optical transitions in atoms and molecules were reviewed. This study expresses various viewpoints by describing how concentration and solvent affect the dye's absorption and fluorescence spectra. The absorption spectra of AO exhibit a band at (490 nm), except for DMSO, which shifts more towards red by 5 nm. The fluorescence spectra show a blue shift in AO aqueous solution around 6 nm until (0.5×10-4) M, followed by a red shift at around 7 nm at (1×10-6) M. There is a blue shift in (1×10-5) M for DMSO at around 4 nm, then a 10 nm red shift in higher concentrations as well as a 9 nm red shift in acetone and 6 nm in ethanol. Adding magnesium oxide nanoparticles (MgO NPs) quenched AO in both absorption and fluorescence spectra, whereas maximum fluorescence and intensity increased when aluminium oxide nanoparticles (Al2O3 NPs) were added to the solution. KEYWORDS Laser dye, absorption spectrum, fluorescence spectrum, MgO NPs, Al2O3 NPs


2019 ◽  
Author(s):  
Marianna Karava ◽  
Felix Bracharz ◽  
Johannes Kabisch

AbstractThe Gram-positive bacteriumBacillus subtilisis able to form endospores which have a variety of biotechnological applications. Due to this ability,B. subtilisis as well a model organism for cellular differentiation processes. Sporulating cultures ofBacillus subtilisform sub-populations which include vegetative cells, spore forming cells and spores. In order to readily and rapidly quantify spore formation we employed flow cytometric and fluorescence activated cell sorting techniques in combination with nucleic acid fluorescent staining in order to investigate the distribution of sporulating cultures on a single cell level. Moreover we tested different fluorescent dyes as well as different conditions in order to develop a method for optimal separation of distinct populations during sporulation. Automated gating procedures using k-means clustering and thresholding by gaussian mixture modeling were employed to avoid subjective gating and allow for the simultaneous measurement of controls. We utilized the presented method for monitoring sporulation over time in strains harboring different genome modifications. We identified the different subpopulations formed during sporulation by employing sorting and microscopy. Finally, we employed the technique to show that a double knock-out mutant of the phosphatase gene encoding Spo0E and of the spore killing factor SkfA results in faster spore formation.


Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 905
Author(s):  
Saquib Ahmed M. A. Peerzade ◽  
Nadezda Makarova ◽  
Igor Sokolov

Fluorescent tagging is a popular method in biomedical research. Using multiple taggants of different but resolvable fluorescent spectra simultaneously (multiplexing), it is possible to obtain more comprehensive and faster information about various biochemical reactions and diseases, for example, in the method of flow cytometry. Here we report on a first demonstration of the synthesis of ultrabright fluorescent silica nanoporous nanoparticles (Star-dots), which have a large number of complex fluorescence spectra suitable for multiplexed applications. The spectra are obtained via simple physical mixing of different commercially available fluorescent dyes in a synthesizing bath. The resulting particles contain dye molecules encapsulated inside of cylindrical nanochannels of the silica matrix. The distance between the dye molecules is sufficiently small to attain Forster resonance energy transfer (FRET) coupling within a portion of the encapsulated dye molecules. As a result, one can have particles of multiple spectra that can be excited with just one wavelength. We show this for the mixing of five, three, and two dyes. Furthermore, the dyes can be mixed inside of particles in different proportions. This brings another dimension in the complexity of the obtained spectra and makes the number of different resolvable spectra practically unlimited. We demonstrate that the spectra obtained by different mixing of just two dyes inside of each particle can be easily distinguished by using a linear decomposition method. As a practical example, the errors of demultiplexing are measured when sets of a hundred particles are used for tagging.


2019 ◽  
Vol 5 (1) ◽  
pp. 1582398 ◽  
Author(s):  
Husniza Hussain ◽  
Santhana Raj L. ◽  
Syahida Ahmad ◽  
Mohd. Fuat Abd. Razak ◽  
Wan Nazaimoon Wan Mohamud ◽  
...  

Blood ◽  
2006 ◽  
Vol 108 (11) ◽  
pp. 3879-3879
Author(s):  
Gayle M. Buller ◽  
Jolene A. Bradford ◽  
Jixiang Liu ◽  
William L. Godfrey

Abstract With polychromatic flow cytometry becoming more prevalent, there is increasing interest in excluding dead cells from analyses without sacrificing the fluorophores already in use. We report several novel organic dyes that can identify stressed or dead cells in stained populations without compromising channels used for common fluorophores such as Alexa Fluor® 488, R-phycoerythrin (R-PE) and R-PE tandem dyes. Fixable violet and fixable aqua dead cell stains been developed that have peak emissions around 450 and 515 nm, respectively, and which can withstand aldehyde fixation, allowing their use with surface and intracellular labeling protocols. These amine reactive fluorescent dyes covalently label dead cells more brightly than live cells because the dye stains the cytoplasm of cells that have lost membrane integrity. (Figure 1A) These dyes stain equivalent dead cell populations versus ethidium monoazide bromide (EMA), but they do not require the additional photolysis step to cross-link EMA to the DNA of dead cells. SYTOX® red dead cell stain is a high-affinity nucleic acid stain that penetrates cells with damaged cell membranes, but will not cross uncompromised cell membranes. Cells stained with SYTOX red dye fluoresce bright red when excited with a red diode laser (Figure 1B), and can be used with fluorophores such as Alexa Fluor 488 dye and R-PE with little need for spectral correction. These properties, combined with a greater than 500-fold increase in fluorescence upon nucleic acid binding, make SYTOX red an optimal dead cell stain for use in flow cytometers equipped with red lasers. For measures of vitality, CellTrace™ calcein violet,AM dye is a metabolic probe that indicates intracellular esterase activity through the enzymatic conversion of the nonfluorescent, cell-permeant acetoxymethyl ester (AM) to a fluorescent violet-excited dye that is retained in the cell and emits fluorescence around 440 nm. Calcein violet,AM shows similar performance to calcein, AM, a common vitality reagent in flow cytometry and microscopy, and can be used in combination with impermeant DNA dyes such as SYTOX red dye or propidium iodide to identify live, injured and dead cells. (Figure 1C) For a violet-excited live/dead assay, the fixable aqua dead cell stain, with peak emission around 515 nm, can be combined with calcein violet,AM. Calcein violet,AM also can be used with Alexa Fluor 488 annexin V and propidium iodide to add a measure of enzymatic activity to the study of apoptosis. Together, these reagents provide multiple methods to add viability and vitality discrimination into standard immunostaining panels. Figure 1. Mixed live and heat-killed Jurkat cells stained with (A) fixable violet dead cell stain, (B) SYTOX red stain, and (C) a mixture of calcein violet,AM and SYTOX red dye. Figure 1. Mixed live and heat-killed Jurkat cells stained with (A) fixable violet dead cell stain, (B) SYTOX red stain, and (C) a mixture of calcein violet,AM and SYTOX red dye.


2014 ◽  
Vol 936 ◽  
pp. 2007-2010
Author(s):  
Saksit Sukprasong ◽  
Tanabat Promjun ◽  
Komsanti Chokethawai ◽  
Athipong Ngamjarurojana

The experiment was conducted to study the effects of concentration, temperature and solvent on the luminescence decay curves obtained in laser-induced fluorescence (LIF) experiment from fluorescent orange dye. Sample solutions of fluorescence dye were prepared by mixing with ethanol solvents at different concentration. The sample was illuminated with a radiation of 470 nm using a blue laser excitation source. Luminescence spectra were recorded using a compact fiber coupled CCD spectrometer and the results were analyzed.The results showed that both concentration and temperature affected the luminescence decay of orange dye in the same way. The luminescence decay was decreased when the concentration and temperature were increased.The appearance of peak positions was slighly shifted to higher wavelength (lower photon energy) when concentration were varied. Then the results of concentration effect were analyzed using peak fit, the appearance of peak positions was slightly shifted from 601.51 to 604.12, 607.64, and 618.44 nm at the concentration of 50, 60, 70 and 80 % by volume, respectively.


Transfusion ◽  
2000 ◽  
Vol 40 (6) ◽  
pp. 693-696 ◽  
Author(s):  
K. Mascotti ◽  
J. McCullough ◽  
S.R. Burger

2009 ◽  
Vol 63 (4) ◽  
Author(s):  
Suling Feng ◽  
Yi Zhang ◽  
Jing Fan

AbstractA simple, rapid, and highly sensitive spectrofluorimetric method for the determination of acitretin was developed based on the strong green fluorescence of acitretin. Influence of organic solvents on the fluorescence spectra of acitretin was studied. Effects of pH, standing time, and foreign ions on the determination of acitretin were also examined. Under the optimum conditions, linear relationship between the relative fluorescence intensity and the concentration of acitretin in the range of 30.0–1100 ng mL−1 was obtained. Detection limit of this method is 9.56 ng mL−1 for acitretin. Relative standard deviation for the determination of 480 ng mL−1 of acitretin was 1.70 %. This method was used for the determination of acitretin in pharmaceuticals and the results were compared with those obtained by the HPLC method.


Cytometry ◽  
1982 ◽  
Vol 3 (3) ◽  
pp. 155-160 ◽  
Author(s):  
C. Anne Wallen ◽  
Ryuji Higashikubo ◽  
Lyle A. Dethlefsen

Sign in / Sign up

Export Citation Format

Share Document