scholarly journals Design of Self-Reconfigurable Multiarm Robot Mechanism Based on Deployable Kinematic Chains

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Fu-Qun Zhao ◽  
Sheng Guo ◽  
Hai-Jun Su ◽  
Hai-Bo Qu ◽  
Ya-Qiong Chen
Keyword(s):  
Parallel Mechanism ◽  
Parallel Mechanisms ◽  
Kinematic Chains ◽  
Assembly Method ◽  
Operation Modes ◽  
Object Based ◽  
Switch Operation ◽  
Storage Area ◽  
Mechanism Theory

Abstract As the structures of multiarm robots are serially arranged, the packaging and transportation of these robots are often inconvenient. The ability of these robots to operate objects must also be improved. Addressing this issue, this paper presents a type of multiarm robot that can be adequately folded into a designed area. The robot can achieve different operation modes by combining different arms and objects. First, deployable kinematic chains (DKCs) are designed, which can be folded into a designated area and be used as an arm structure in the multiarm robot mechanism. The strategy of a platform for storing DKCs is proposed. Based on the restrictions in the storage area and the characteristics of parallel mechanisms, a class of DKCs, called base assembly library, is obtained. Subsequently, an assembly method for the synthesis of the multiarm robot mechanism is proposed, which can be formed by the connection of a multiarm robot mechanism with an operation object based on a parallel mechanism structure. The formed parallel mechanism can achieve a reconfigurable characteristic when different DKCs connect to the operation object. Using this method, two types of multiarm robot mechanisms with four DKCs that can switch operation modes to perform different tasks through autonomous combination and release operation is proposed. The obtained mechanisms have observable advantages when compared with the traditional mechanisms, including optimizing the occupied volume during transportation and using parallel mechanism theory to analyze the switching of operation modes.

scholarly journals Reconfiguration Analysis of a 3-DOF Parallel Mechanism

Robotics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 66
Author(s):  
Maurizio Ruggiu ◽  
Xianwen Kong
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Operation Mode ◽  
Parallel Mechanisms ◽  
Universal Joint ◽  
Kinematic Chains ◽  
Constraint Equations ◽  
The Third ◽  
Equilateral Triangles ◽  
Moving Platform

This paper deals with the reconfiguration analysis of a 3-DOF (degrees-of-freedom) parallel manipulator (PM) which belongs to the cylindrical parallel mechanisms family. The PM is composed of a base and a moving platform shaped as equilateral triangles connected by three serial kinematic chains (legs). Two legs are composed of two universal (U) joints connected by a prismatic (P) joint. The third leg is composed of a revolute (R) joint connected to the base, a prismatic joint and universal joint in sequence. A set of constraint equations of the 1-RPU−2-UPU PM is derived and solved in terms of the Euler parameter quaternion (a.k.a. Euler-Rodrigues quaternion) representing the orientation of the moving platform and of the Cartesian coordinates of the reference point on the moving platform. It is found that the PM may undergo either the 3-DOF PPR or the 3-DOF planar operation mode only when the base and the moving platform are identical. The transition configuration between the operation modes is also identified.

Analysis and Design of Lower-Mobility Parallel Mechanism of Non-Symmetrical Based on Variable Topology Theory

2011 ◽  
Vol 201-203 ◽  
pp. 1907-1912
Author(s):  
Rong Jiang Cui ◽  
Zong He Guo ◽  
Zi Xun Yin ◽  
Song Song Zhu
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Basic Variable ◽  
Analysis And Design ◽  
And Topology ◽  
Variable Topology ◽  
Lower Mobility ◽  
Branched Chain ◽  
Mechanism Theory

First, the branched-chain of parallel mechanism was Classified according to reciprocal screw theory. Then, the introduction of variable topology mechanism theory, with the characteristics of parallel mechanisms themselves, the definition and basic variable topology means of variable topology parallel mechanism were given. With evolutionary theory, the method to design lower-mobility parallel mechanisms of non-asymmetric was proposed based on variable topology mechanism theory .Taking 3-RPS as ideal mechanism and topology synthesis was carried out, besides 2-RPS mechanism were analyzed. The introduction of variable topology mechanism theory provided a theoretical basis and innovative approaches for the synthesis configuration of Lower-mobility parallel mechanisms of non-asymmetric.

Type Synthesis of Parallel Mechanisms With Multiple Operation Modes

2006 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin ◽  
Pierre-Luc Richard
Keyword(s):  
Parallel Mechanism ◽  
Translational Motion ◽  
Parallel Mechanisms ◽  
Motion Pattern ◽  
Type Synthesis ◽  
Motion Patterns ◽  
Operation Modes ◽  
Multiple Operation ◽  
Spherical Motion ◽  
General Method

There are usually several motion patterns having the same DOF (degree of freedom). For example, planar motion, spherical motion, and spatial translation are motion patterns with 3-DOF. An f-DOF parallel mechanism with multiple operation modes is a parallel mechanism that can generate different motion patterns with f DOF. Up to now, no method has been proposed for the type synthesis of parallel mechanisms with multiple operation modes. This paper presents a general method for the type synthesis of parallel mechanisms with multiple operation modes. Using the proposed approach, 3-DOF parallel mechanisms with both spherical and translational modes, i.e., parallel mechanisms generating both the spherical motion pattern and the spatial translational motion pattern, are generated systematically. A large number of parallel mechanisms with both spherical and translational modes are obtained.

Compositional Submanifolds of Prismatic–Universal–Prismatic and Skewed Prismatic–Revolute– Prismatic Kinematic Chains and Their Derived Parallel Mechanisms

2018 ◽  
Vol 10 (3) ◽  
Author(s):  
Xinsheng Zhang ◽  
Pablo López-Custodio ◽  
Jian S. Dai
Keyword(s):  
Parallel Mechanism ◽  
Kinematic Chain ◽  
Planar Motion ◽  
Helical Motion ◽  
Parallel Mechanisms ◽  
Motion Group ◽  
Revolute Joint ◽  
Kinematic Chains ◽  
Prismatic Joint ◽  
Joint Axis

The kinematic chains that generate the planar motion group in which the prismatic-joint direction is always perpendicular to the revolute-joint axis have shown their effectiveness in type synthesis and mechanism analysis in parallel mechanisms. This paper extends the standard prismatic–revolute–prismatic (PRP) kinematic chain generating the planar motion group to a relatively generic case, in which one of the prismatic joint-directions is not necessarily perpendicular to the revolute-joint axis, leading to the discovery of a pseudo-helical motion with a variable pitch in a kinematic chain. The displacement of such a PRP chain generates a submanifold of the Schoenflies motion subgroup. This paper investigates for the first time this type of motion that is the variable-pitched pseudo-planar motion described by the above submanifold. Following the extraction of a helical motion from this skewed PRP kinematic chain, this paper investigates the bifurcated motion in a 3-prismatic–universal–prismatic (PUP) parallel mechanism by changing the active geometrical constraint in its configuration space. The method used in this contribution simplifies the analysis of such a parallel mechanism without resorting to an in-depth geometrical analysis and screw theory. Further, a parallel platform which can generate this skewed PRP type of motion is presented. An experimental test setup is based on a three-dimensional (3D) printed prototype of the 3-PUP parallel mechanism to detect the variable-pitched translation of the helical motion.

Coupling Degree of Mechanism and Its Application

2006 ◽  
Author(s):  
Jing Xiong ◽  
Ting-Li Yang ◽  
Xiangdong Yang ◽  
Dongchao Yang ◽  
Ken Chen
Keyword(s):  
Dynamic Analysis ◽  
Topological Structure ◽  
Parallel Mechanism ◽  
Kinematics And Dynamics ◽  
Parallel Mechanisms ◽  
Kinematic Chains ◽  
Unified Modeling

The kinematic and dynamic analysis of an spatial multi-loop mechanism especially parallel mechanism is significant but always complex. Based on the topological structure of mechanisms, this paper proposes the concept of coupling degree of mechanism systematically, and applies it to the criterion of basic kinematic chains(BKCs) and other problems. The relation between topology, kinematics and dynamics of parallel mechanisms is established, and then it is achieved to quantitatively describe the analysis complexity of a parallel mechanism and to obtain its simplest solving path, according to its topological structure. The preliminary method for unified modeling of the topology, kinematics and dynamics of parallel mechanisms is proposed, using BKC as the basic analysis unit. Some suggestions for optimization and selective preference of parallel mechanisms are also presented.

A serial of novel four degrees of freedom parallel mechanisms with large rotational workspace

Robotica ◽  
2014 ◽  
Vol 34 (4) ◽  
pp. 764-776 ◽  
Author(s):  
Sheng Guo ◽  
Wei Ye ◽  
Haibo Qu ◽  
Dan Zhang ◽  
Yuefa Fang
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Planetary Gear ◽  
Gear Train ◽  
Parallel Mechanisms ◽  
Kinematics Analysis ◽  
Kinematic Chains ◽  
Moving Platform ◽  
Partition Method

SUMMARYIn this paper, a class of novel four Degrees of Freedom (DOF) non-overconstrained parallel mechanisms with large rotational workspace is presented based on screw theory. First, the conflict between the number of independent constraints applied on the moving platform and the number of kinematic limbs for 4-DOF non-overconstrained parallel mechanism is identified. To solve this conflict, the platform partition method is introduced, and two secondary platforms are employed in each of the parallel mechanisms. Then, the motion requirements of the secondary platforms are analyzed and all the possible kinematic chains are enumerated. The geometrical assembly conditions of all possible secondary limbs are analyzed and some typical non-overconstrained parallel mechanisms are generated. In each of the parallel mechanisms, a planetary gear train is used to connect both of the secondary platforms. The large rotational workspace of the moving platform is obtained due to the relative motion of the two secondary platforms. Finally, the kinematics analysis of a typical parallel mechanism is conducted.

Lie Group Based Type Synthesis Using Transformation Configuration Space for Reconfigurable Parallel Mechanisms With Bifurcation Between Spherical Motion and Planar Motion

2019 ◽  
Vol 142 (6) ◽  
Author(s):  
Jun Wei ◽  
Jian S. Dai
Keyword(s):  
Configuration Space ◽  
Parallel Mechanism ◽  
Identity Element ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Motion Representation ◽  
Kinematic Chains ◽  
Common Intersection ◽  
The Common ◽  
Spherical Motion

Abstract This paper investigates novel reconfigurable parallel mechanisms with bifurcation between planar subgroup SE(2) and rotation subgroup SO(3) based on a transformation configuration space. Having recollected necessary theoretical fundamentals with regard to compositional submanifolds and kinematic bonds, the motion representation of the platform of reconfigurable parallel mechanisms are investigated. The transformation configuration space of a reconfigurable parallel mechanism with motion branches is proposed with respect to the fact that the intersection of Lie subgroups or submanifolds is the identity element or a non-identity element. The switch conditions of the transformation configuration space are discussed, leading to establishment of a theoretical foundation for realizing a switch of motion branches. The switch principle of reconfigurable parallel mechanisms is further investigated with respect to the common motion between SE(2) parallel-mechanism motion generators and SO(3) parallel-mechanism motion generators. Under this principle, the subchains with common motion generators are synthesized and divided into two types of generators. The first type of generators generates kinematic chains with a common intersection of three joint axes, and the second type of generators generates a common intersection of two joint axes. Following this, two types of reconfigurable parallel mechanisms with three identical subchains are synthesized, resulting in 11 varieties in which platforms can be switched between SE(2) and SO(3) after passing through the singularity configuration space.

Type Synthesis of Parallel Mechanisms With Multiple Operation Modes

2006 ◽  
Vol 129 (6) ◽  
pp. 595-601 ◽  
Author(s):  
Xianwen Kong ◽  
Clément M. Gosselin ◽  
Pierre-Luc Richard
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Translational Motion ◽  
Parallel Mechanisms ◽  
Motion Pattern ◽  
Type Synthesis ◽  
Motion Patterns ◽  
Operation Modes ◽  
Multiple Operation ◽  
Spherical Motion

There are usually several motion patterns having the same degrees of freedom (DOF). For example, planar motion, spherical motion, and spatial translation are motion patterns with 3 DOF. An f-DOF parallel mechanism with multiple operation modes is a parallel mechanism that can generate different motion patterns with f DOF. Up to now, no method has been proposed for the type synthesis of parallel mechanisms with multiple operation modes. This paper presents a general method for the type synthesis of parallel mechanisms with multiple operation modes. Using the proposed approach, 3-DOF parallel mechanisms with both spherical and translational modes, i.e., parallel mechanism generating both a spherical motion pattern and a spatial translational motion pattern, are generated systematically. A large number of parallel mechanisms with both spherical and translational modes are obtained.

scholarly journals Type Synthesis of 1T2R Parallel Mechanisms Using Structure Coupling-Reducing Method

2019 ◽  
Vol 32 (1) ◽  
Author(s):  
Haitao Liu ◽  
Ke Xu ◽  
Huiping Shen ◽  
Xianlei Shan ◽  
Tingli Yang
Keyword(s):  
Explicit Form ◽  
Parallel Mechanism ◽  
Analytic Solutions ◽  
Forward Kinematics ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Real Time Control ◽  
Time Control ◽  
Topological Characteristics ◽  
Zero Coupling

Abstract Direct kinematics with analytic solutions is critical to the real-time control of parallel mechanisms. Therefore, the type synthesis of a mechanism having explicit form of forward kinematics has become a topic of interest. Based on this purpose, this paper deals with the type synthesis of 1T2R parallel mechanisms by investigating the topological structure coupling-reducing of the 3UPS&UP parallel mechanism. With the aid of the theory of mechanism topology, the analysis of the topological characteristics of the 3UPS&UP parallel mechanism is presented, which shows that there are highly coupled motions and constraints amongst the limbs of the mechanism. Three methods for structure coupling-reducing of the 3UPS&UP parallel mechanism are proposed, resulting in eight new types of 1T2R parallel mechanisms with one or zero coupling degree. One obtained parallel mechanism is taken as an example to demonstrate that a mechanism with zero coupling degree has an explicit form for forward kinematics. The process of type synthesis is in the order of permutation and combination; therefore, there are no omissions. This method is also applicable to other configurations, and novel topological structures having simple forward kinematics can be obtained from an original mechanism via this method.

scholarly journals Constraint and Mobility Change Analysis of Rubik’s Cube-inspired Reconfigurable Joints and Corresponding Parallel Mechanisms

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Duanling Li ◽  
Pu Jia ◽  
Jiazhou Li ◽  
Dan Zhang ◽  
Xianwen Kong
Keyword(s):  
Parallel Mechanism ◽  
Unique Feature ◽  
Theoretical Method ◽  
Geometric Constraint ◽  
Parallel Mechanisms ◽  
Change Analysis ◽  
Application Range ◽  
And Topology ◽  
Physical Experiments ◽  
Underlying Principle

Abstract The current research of reconfigurable parallel mechanism mainly focuses on the construction of reconfigurable joints. Compared with the method of changing the mobility by physical locking joints, the geometric constraint has good controllability, and the constructed parallel mechanism has more configurations and wider application range. This paper presents a reconfigurable axis (rA) joint inspired and evolved from Rubik's Cubes, which have a unique feature of geometric and physical constraint of axes of joint. The effectiveness of the rA joint in the construction of the limb is analyzed, resulting in a change in mobility and topology of the parallel mechanism. The rA joint makes the angle among the three axes inside the groove changed arbitrarily. This change in mobility is completed by the case illustrated by a 3(rA)P(rA) reconfigurable parallel mechanism having variable mobility from 1 to 6 and having various special configurations including pure translations, pure rotations. The underlying principle of the metamorphosis of this rA joint is shown by investigating the dependence of the corresponding screw system comprising of line vectors, leading to evolution of the rA joint from two types of spherical joints to three types of variable Hooke joints and one revolute joint. The reconfigurable parallel mechanism alters its topology by rotating or locking the axis of rA joint to turn all limbs into different phases. The prototype of reconfigurable parallel mechanism is manufactured and all configurations are enumerated to verify the validity of the theoretical method by physical experiments.

Sign in / Sign up

Export Citation Format

Share Document