scholarly journals Genomic selection and genetic gain for nut yield in an Australian macadamia breeding population

BMC Genomics ◽  
2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Katie M. O’Connor ◽  
Ben J. Hayes ◽  
Craig M. Hardner ◽  
Mobashwer Alam ◽  
Robert J. Henry ◽  
...  
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Prediction Accuracy ◽  
Breeding Population ◽  
Yield Stability ◽  
Breeding Program ◽  
Breeding Methods ◽  
Selection Efficiency ◽  
Generation Length ◽  
Traditional Breeding

Abstract Background Improving yield prediction and selection efficiency is critical for tree breeding. This is vital for macadamia trees with the time from crossing to production of new cultivars being almost a quarter of a century. Genomic selection (GS) is a useful tool in plant breeding, particularly with perennial trees, contributing to an increased rate of genetic gain and reducing the length of the breeding cycle. We investigated the potential of using GS methods to increase genetic gain and accelerate selection efficiency in the Australian macadamia breeding program with comparison to traditional breeding methods. This study evaluated the prediction accuracy of GS in a macadamia breeding population of 295 full-sib progeny from 32 families (29 parents, reciprocals combined), along with a subset of parents. Historical yield data for tree ages 5 to 8 years were used in the study, along with a set of 4113 SNP markers. The traits of focus were average nut yield from tree ages 5 to 8 years and yield stability, measured as the standard deviation of yield over these 4 years. GBLUP GS models were used to obtain genomic estimated breeding values for each genotype, with a five-fold cross-validation method and two techniques: prediction across related populations and prediction across unrelated populations. Results Narrow-sense heritability of yield and yield stability was low (h2 = 0.30 and 0.04, respectively). Prediction accuracy for yield was 0.57 for predictions across related populations and 0.14 when predicted across unrelated populations. Accuracy of prediction of yield stability was high (r = 0.79) for predictions across related populations. Predicted genetic gain of yield using GS in related populations was 474 g/year, more than double that of traditional breeding methods (226 g/year), due to the halving of generation length from 8 to 4 years. Conclusions The results of this study indicate that the incorporation of GS for yield into the Australian macadamia breeding program may accelerate genetic gain due to reduction in generation length, though the cost of genotyping appears to be a constraint at present.

scholarly journals Genomic Selection for Any Dairy Breeding Program via Optimized Investment in Phenotyping and Genotyping

2021 ◽  
Vol 12 ◽  
Author(s):  
Jana Obšteter ◽  
Janez Jenko ◽  
Gregor Gorjanc
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Breeding Program ◽  
Progeny Testing ◽  
Initial Training ◽  
Training Population ◽  
Breeding Programs ◽  
Use Of Resources ◽  
Dairy Cattle Breeding ◽  
Close Relatives

This paper evaluates the potential of maximizing genetic gain in dairy cattle breeding by optimizing investment into phenotyping and genotyping. Conventional breeding focuses on phenotyping selection candidates or their close relatives to maximize selection accuracy for breeders and quality assurance for producers. Genomic selection decoupled phenotyping and selection and through this increased genetic gain per year compared to the conventional selection. Although genomic selection is established in well-resourced breeding programs, small populations and developing countries still struggle with the implementation. The main issues include the lack of training animals and lack of financial resources. To address this, we simulated a case-study of a small dairy population with a number of scenarios with equal available resources yet varied use of resources for phenotyping and genotyping. The conventional progeny testing scenario collected 11 phenotypic records per lactation. In genomic selection scenarios, we reduced phenotyping to between 10 and 1 phenotypic records per lactation and invested the saved resources into genotyping. We tested these scenarios at different relative prices of phenotyping to genotyping and with or without an initial training population for genomic selection. Reallocating a part of phenotyping resources for repeated milk records to genotyping increased genetic gain compared to the conventional selection scenario regardless of the amount and relative cost of phenotyping, and the availability of an initial training population. Genetic gain increased by increasing genotyping, despite reduced phenotyping. High-genotyping scenarios even saved resources. Genomic selection scenarios expectedly increased accuracy for young non-phenotyped candidate males and females, but also proven females. This study shows that breeding programs should optimize investment into phenotyping and genotyping to maximize return on investment. Our results suggest that any dairy breeding program using conventional progeny testing with repeated milk records can implement genomic selection without increasing the level of investment.

Genomic Selection for Yield and Seed Protein Content in Soybean: A Study of Breeding Program Data and Assessment of Prediction Accuracy

Crop Science ◽  
2017 ◽  
Vol 57 (3) ◽  
pp. 1325-1337 ◽  
Author(s):  
Alexandra Duhnen ◽  
Amandine Gras ◽  
Simon Teyssèdre ◽  
Michel Romestant ◽  
Bruno Claustres ◽  
...  
Keyword(s):  
Protein Content ◽  
Genomic Selection ◽  
Prediction Accuracy ◽  
Seed Protein ◽  
Breeding Program ◽  
Seed Protein Content ◽  
Selection For ◽  
Program Data

scholarly journals Maximizing efficiency of genomic selection in CIMMYT’s tropical maize breeding program

2020 ◽  
Author(s):  
Sikiru Adeniyi Atanda ◽  
Michael Olsen ◽  
Juan Burgueño ◽  
Jose Crossa ◽  
Daniel Dzidzienyo ◽  
...  
Keyword(s):  
Genomic Selection ◽  
Prediction Accuracy ◽  
Large Scale ◽  
Primary Objective ◽  
Breeding Program ◽  
Breeding Cycle ◽  
Training Set ◽  
Maize Breeding ◽  
Phenotypic Data ◽  
Breeding Programs

Abstract Key message Historical data from breeding programs can be efficiently used to improve genomic selection accuracy, especially when the training set is optimized to subset individuals most informative of the target testing set. Abstract The current strategy for large-scale implementation of genomic selection (GS) at the International Maize and Wheat Improvement Center (CIMMYT) global maize breeding program has been to train models using information from full-sibs in a “test-half-predict-half approach.” Although effective, this approach has limitations, as it requires large full-sib populations and limits the ability to shorten variety testing and breeding cycle times. The primary objective of this study was to identify optimal experimental and training set designs to maximize prediction accuracy of GS in CIMMYT’s maize breeding programs. Training set (TS) design strategies were evaluated to determine the most efficient use of phenotypic data collected on relatives for genomic prediction (GP) using datasets containing 849 (DS1) and 1389 (DS2) DH-lines evaluated as testcrosses in 2017 and 2018, respectively. Our results show there is merit in the use of multiple bi-parental populations as TS when selected using algorithms to maximize relatedness between the training and prediction sets. In a breeding program where relevant past breeding information is not readily available, the phenotyping expenditure can be spread across connected bi-parental populations by phenotyping only a small number of lines from each population. This significantly improves prediction accuracy compared to within-population prediction, especially when the TS for within full-sib prediction is small. Finally, we demonstrate that prediction accuracy in either sparse testing or “test-half-predict-half” can further be improved by optimizing which lines are planted for phenotyping and which lines are to be only genotyped for advancement based on GP.

scholarly journals A multi-part strategy for introgression of exotic germplasm into elite plant breeding programs using genomic selection

2022 ◽  
Author(s):  
Irene S. Breider ◽  
R. Chris Gaynor ◽  
Gregor Gorjanc ◽  
Steve Thorn ◽  
Manish K. Pandey ◽  
...  
Keyword(s):  
Genetic Variation ◽  
Plant Breeding ◽  
Genomic Selection ◽  
Genetic Gain ◽  
Genetic Improvement ◽  
Breeding Strategy ◽  
Breeding Program ◽  
Breeding Programs ◽  
Polygenic Inheritance ◽  
Polygenic Traits

Abstract Some of the most economically important traits in plant breeding show highly polygenic inheritance. Genetic variation is a key determinant of the rates of genetic improvement in selective breeding programs. Rapid progress in genetic improvement comes at the cost of a rapid loss of genetic variation. Germplasm available through expired Plant Variety Protection (exPVP) lines is a potential resource of variation previously lost in elite breeding programs. Introgression for polygenic traits is challenging, as many genes have a small effect on the trait of interest. Here we propose a way to overcome these challenges with a multi-part pre-breeding program that has feedback pathways to optimise recurrent genomic selection. The multi-part breeding program consists of three components, namely a bridging component, population improvement, and product development. Parameters influencing the multi-part program were optimised with the use of a grid search. Haploblock effect and origin were investigated. Results showed that the introgression of exPVP germplasm using an optimised multi-part breeding strategy resulted in 1.53 times higher genetic gain compared to a two-part breeding program. Higher gain was achieved through reducing the performance gap between exPVP and elite germplasm and breaking down linkage drag. Both first and subsequent introgression events showed to be successful. In conclusion, the multi-part breeding strategy has a potential to improve long-term genetic gain for polygenic traits and therefore, potential to contribute to global food security.

scholarly journals Genetic Gain and Inbreeding from Genomic Selection in a Simulated Commercial Breeding Program for Perennial Ryegrass

2016 ◽  
Vol 9 (1) ◽  
Author(s):  
Zibei Lin ◽  
Noel O. I. Cogan ◽  
Luke W. Pembleton ◽  
German C. Spangenberg ◽  
John W. Forster ◽  
...  
Keyword(s):  
Genomic Selection ◽  
Perennial Ryegrass ◽  
Genetic Gain ◽  
Breeding Program ◽  
Commercial Breeding

scholarly journals Modeling Illustrates That Genomic Selection Provides New Opportunities for Intercrop Breeding

2021 ◽  
Vol 12 ◽  
Author(s):  
Jon Bančič ◽  
Christian R. Werner ◽  
R. Chris Gaynor ◽  
Gregor Gorjanc ◽  
Damaris A. Odeny ◽  
...  
Keyword(s):  
Grain Yield ◽  
Genetic Correlation ◽  
Genomic Selection ◽  
Genetic Gain ◽  
Phenotypic Selection ◽  
Breeding Program ◽  
Weed Suppression ◽  
Selection Strategy ◽  
Agricultural Practice ◽  
Breeding Programs

Intercrop breeding programs using genomic selection can produce faster genetic gain than intercrop breeding programs using phenotypic selection. Intercropping is an agricultural practice in which two or more component crops are grown together. It can lead to enhanced soil structure and fertility, improved weed suppression, and better control of pests and diseases. Especially in subsistence agriculture, intercropping has great potential to optimize farming and increase profitability. However, breeding for intercrop varieties is complex as it requires simultaneous improvement of two or more component crops that combine well in the field. We hypothesize that genomic selection can significantly simplify and accelerate the process of breeding crops for intercropping. Therefore, we used stochastic simulation to compare four different intercrop breeding programs implementing genomic selection and an intercrop breeding program entirely based on phenotypic selection. We assumed three different levels of genetic correlation between monocrop grain yield and intercrop grain yield to investigate how the different breeding strategies are impacted by this factor. We found that all four simulated breeding programs using genomic selection produced significantly more intercrop genetic gain than the phenotypic selection program regardless of the genetic correlation with monocrop yield. We suggest a genomic selection strategy which combines monocrop and intercrop trait information to predict general intercropping ability to increase selection accuracy in the early stages of a breeding program and to minimize the generation interval.

scholarly journals Genomic selection for any dairy breeding program via optimized investment in phenotyping and genotyping

2020 ◽  
Author(s):  
Jana Obšteter ◽  
Janez Jenko ◽  
Gregor Gorjanc
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Breeding Program ◽  
Progeny Testing ◽  
Initial Training ◽  
Training Population ◽  
Breeding Programs ◽  
Female Candidates ◽  
Use Of Resources ◽  
Close Relatives

AbstractThis paper evaluates the potential of maximizing genetic gain in dairy cattle breeding by optimizing investment into phenotyping and genotyping. Conventional breeding focuses on phenotyping selection candidates or their close relatives to maximize selection accuracy for breeders and quality assurance for producers. Genomic selection decoupled phenotyping and selection and through this increased genetic gain per year compared to the conventional selection. Although genomic selection is established in well-resourced breeding programs, small populations and developing countries still struggle with the implementation. The main issues include the lack of training animals and lack of financial resources. To address this, we simulated a case-study of a small dairy population with a number of scenarios with equal resources yet varied use of resources for phenotyping and genotyping. The conventional progeny testing scenario had 11 phenotype records per lactation. In genomic scenarios, we reduced phenotyping to between 10 and 1 phenotype records per lactation and invested the saved resources into genotyping. We tested these scenarios at different relative prices of phenotyping to genotyping and with or without an initial training population for genomic selection. Reallocating a part of phenotyping resources for repeated milk records to genotyping increased genetic gain compared to the conventional scenario regardless of the amount and relative cost of phenotyping, and the availability of an initial training population. Genetic gain increased by increasing genotyping, despite reduced phenotyping. High-genotyping scenarios even saved resources. Genomic scenarios expectedly increased accuracy for young non-phenotyped male and female candidates, but also cows. This study shows that breeding programs should optimize investment into phenotyping and genotyping to maximise return on investment. Our results suggest that any dairy breeding program using conventional progeny testing with repeated milk records can implement genomic selection without increasing the level of investment.

scholarly journals Simulation studies to optimize genomic selection in honey bees

2021 ◽  
Vol 53 (1) ◽  
Author(s):  
Richard Bernstein ◽  
Manuel Du ◽  
Andreas Hoppe ◽  
Kaspar Bienefeld
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Honey Bees ◽  
Reference Population ◽  
Breeding Program ◽  
Genomic Relationship Matrix ◽  
Relationship Matrix ◽  
Genomic Relationship ◽  
Genomic Breeding ◽  
Breeding Values

Abstract Background With the completion of a single nucleotide polymorphism (SNP) chip for honey bees, the technical basis of genomic selection is laid. However, for its application in practice, methods to estimate genomic breeding values need to be adapted to the specificities of the genetics and breeding infrastructure of this species. Drone-producing queens (DPQ) are used for mating control, and usually, they head non-phenotyped colonies that will be placed on mating stations. Breeding queens (BQ) head colonies that are intended to be phenotyped and used to produce new queens. Our aim was to evaluate different breeding program designs for the initiation of genomic selection in honey bees. Methods Stochastic simulations were conducted to evaluate the quality of the estimated breeding values. We developed a variation of the genomic relationship matrix to include genotypes of DPQ and tested different sizes of the reference population. The results were used to estimate genetic gain in the initial selection cycle of a genomic breeding program. This program was run over six years, and different numbers of genotyped queens per year were considered. Resources could be allocated to increase the reference population, or to perform genomic preselection of BQ and/or DPQ. Results Including the genotypes of 5000 phenotyped BQ increased the accuracy of predictions of breeding values by up to 173%, depending on the size of the reference population and the trait considered. To initiate a breeding program, genotyping a minimum number of 1000 queens per year is required. In this case, genetic gain was highest when genomic preselection of DPQ was coupled with the genotyping of 10–20% of the phenotyped BQ. For maximum genetic gain per used genotype, more than 2500 genotyped queens per year and preselection of all BQ and DPQ are required. Conclusions This study shows that the first priority in a breeding program is to genotype phenotyped BQ to obtain a sufficiently large reference population, which allows successful genomic preselection of queens. To maximize genetic gain, DPQ should be preselected, and their genotypes included in the genomic relationship matrix. We suggest, that the developed methods for genomic prediction are suitable for implementation in genomic honey bee breeding programs.

Sign in / Sign up

Export Citation Format

Share Document