2D marine controlled-source electromagnetic modeling: Part 2 — The effect of bathymetry

Geophysics ◽  
2007 ◽  
Vol 72 (2) ◽  
pp. WA63-WA71 ◽  
Author(s):  
Yuguo Li ◽  
Steven Constable
Keyword(s):  
Finite Element ◽  
Numerical Modeling ◽  
Data Sets ◽  
Electromagnetic Modeling ◽  
Seafloor Topography ◽  
Transmission Frequency ◽  
Controlled Source ◽  
Magnetic Components ◽  
Marine Csem ◽  
Conductivity Contrast

Marine controlled-source electromagnetic (CSEM) data are strongly affected by bathymetry because of the conductivity contrast between seawater and the crust below the seafloor. We simulate the marine CSEM response to 2D bathymetry using our new finite element (FE) code, and our numerical modeling shows that all electric and magnetic components are influenced by bathymery, but to different extents. Bathymetry effects depend upon transmission frequency, seabed conductivity, seawater depth, transmitter-receiver geometry, and roughness of the seafloor topography. Bathymetry effects clearly have to be take into account to avoid the misinterpretation of marine CSEM data sets.

2-D electromagnetic modeling by finite‐element method with a dipole source and topography

Geophysics ◽  
2000 ◽  
Vol 65 (2) ◽  
pp. 465-475 ◽  
Author(s):  
Yuji Mitsuhata
Keyword(s):  
Finite Element ◽  
Delta Function ◽  
Dipole Source ◽  
Electromagnetic Modeling ◽  
Secondary Field ◽  
Controlled Source ◽  
Transient Electromagnetic ◽  
Isoparametric Finite Element ◽  
Anomalous Bodies ◽  
Element Technique

I present a method for calculating frequency‐domain electromagnetic responses caused by a dipole source over a 2-D structure. In modeling controlled‐source electromagnetic data, it is usual to separate the electromagnetic field into a primary (background) and a secondary (scattered) field to avoid a source singularity, and only the secondary field caused by anomalous bodies is computed numerically. However, this conventional scheme is not effective for complex structures lacking a simple background structure. The present modeling method uses a pseudo‐delta function to distribute the dipole source current, and does not need the separation of the primary and the secondary field. In addition, the method employs an isoparametric finite‐element technique to represent realistic topography. Numerical experiments are used to validate the code. Finally, a simulation of a source overprint effect and the response of topography for the long‐offset transient electromagnetic and the controlled‐source magnetotelluric measurements is presented.

scholarly journals custEM: Customizable finite-element simulation of complex controlled-source electromagnetic data

Geophysics ◽  
2019 ◽  
Vol 84 (2) ◽  
pp. F17-F33 ◽  
Author(s):  
Raphael Rochlitz ◽  
Nico Skibbe ◽  
Thomas Günther
Keyword(s):  
Finite Element ◽  
Open Source ◽  
Mesh Generation ◽  
Analytic Solutions ◽  
Superior Performance ◽  
Electromagnetic Modeling ◽  
Matrix Assembly ◽  
Controlled Source ◽  
Time Harmonic ◽  
Element Simulation

We have developed the open-source toolbox custEM (customizable electromagnetic modeling) for the simulation of complex 3D controlled-source electromagnetic (CSEM) problems. It is based on the open-source finite-element library FEniCS, which supports tetrahedral meshes, multiprocessing, higher order polynomials, and anisotropy. We use multiple finite-element approaches to solve the time-harmonic Maxwell equations, which are based on total or secondary electric field and gauged potential formulations. In addition, we develop a secondary magnetic field formulation, showing superior performance if only magnetic fields are required. Using Nédélec basis functions, we robustly incorporate the current density on the edges of the mesh for the total field formulations. The latter enable modeling of CSEM problems taking topography into account. We evaluate semianalytical 1D layered-earth solutions with the pyhed library, supporting arbitrary configurations of dipole or loop sources for secondary field calculations. All system matrices have been modified to be symmetric and solved in parallel with the direct solver MUMPS. Aside from the finite-element kernel, mesh generation, interpolation, and visualization modules have been implemented to simplify and automate the modeling workflow. We prove the capability of custEM, including validation against analytic-solutions, crossvalidation of all implemented approaches, and results for a model with 3D topography with four examples. The object-oriented implementation allows for customizable modifications and additions or to use only submodules designed for special tasks, such as mesh generation or matrix assembly. Therefore, the toolbox is suitable for crossvalidation with other codes and as the basis for developing 3D inversion routines.

Application of 3D marine controlled-source electromagnetic finite-element forward modeling to hydrocarbon exploration in the Flemish Pass Basin offshore Newfoundland, Canada

Geophysics ◽  
2018 ◽  
Vol 83 (2) ◽  
pp. WB33-WB49 ◽  
Author(s):  
Michael W. Dunham ◽  
SeyedMasoud Ansari ◽  
Colin G. Farquharson
Keyword(s):  
Finite Element ◽  
3D Model ◽  
A Priori ◽  
Simulated Data ◽  
Forward Modeling ◽  
Modeling Method ◽  
Hydrocarbon Exploration ◽  
Tetrahedral Mesh ◽  
Controlled Source ◽  
Marine Csem

In recent years, marine controlled-source electromagnetic (CSEM) surveying has become an effective supplemental interpretation tool to the seismic reflection method to help mitigate risk in an offshore exploration setting. Interpretation of marine CSEM data is commonly achieved via finite-difference inversions on rectilinear meshes, which has its merits, but the results are typically of very low resolution. The alternative is forward modeling, which requires a model to be known a priori, but the detail of the model can be created to reflect realistic geologic conditions. What is typically seen in the literature are applications of EM forward modeling codes to synthetic, and sometimes complex synthetic, models. However, what the literature is missing is an application that overcomes the challenges of applying a 3D forward modeling method to real models constructed from real information. We have developed an application of a 3D marine CSEM finite-element forward modeling method to the Bay du Nord prospect in the Flemish Pass Basin offshore Newfoundland. The 3D resistivity model, composed of four topographical layers and the Bay du Nord reservoir body, was built using 2D seismic data, one well log, and a marine CSEM inversion. Although other mesh representations have their merits, we chose to discretize our 3D model into an unstructured tetrahedral mesh because its flexibility enabled the accurate representation of complex structures while minimizing the number of unknowns. The availability of measured marine CSEM data allowed for the resistivities of each layer in the 3D model to be refined, and it also allowed for the simulated data to be assessed in the context of the real noise levels. A subsequent sensitivity analysis of the forward modeling results provided insights regarding the detectability of the Bay du Nord reservoir.

Upon Impact Numerical Modeling of Foam Materials

2017 ◽  
Vol 54 (2) ◽  
pp. 195-202
Author(s):  
Vasile Nastasescu ◽  
Silvia Marzavan
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Modeling ◽  
Numerical Analysis ◽  
Numerical Methods ◽  
Boundary Conditions ◽  
General Character ◽  
Foam Material ◽  
Various Boundary Conditions ◽  
Specific Behaviour

The paper presents some theoretical and practical issues, particularly useful to users of numerical methods, especially finite element method for the behaviour modelling of the foam materials. Given the characteristics of specific behaviour of the foam materials, the requirement which has to be taken into consideration is the compression, inclusive impact with bodies more rigid then a foam material, when this is used alone or in combination with other materials in the form of composite laminated with various boundary conditions. The results and conclusions presented in this paper are the results of our investigations in the field and relates to the use of LS-Dyna program, but many observations, findings and conclusions, have a general character, valid for use of any numerical analysis by FEM programs.

Three-dimensional inversion of controlled-source audio-frequency magnetotelluric data based on unstructured finite-element method

2020 ◽  
Vol 17 (3) ◽  
pp. 349-360
Author(s):  
Xiang-Zhong Chen ◽  
Yun-He Liu ◽  
Chang-Chun Yin ◽  
Chang-Kai Qiu ◽  
Jie Zhang ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Three Dimensional ◽  
Audio Frequency ◽  
Magnetotelluric Data ◽  
Controlled Source ◽  
Element Method

scholarly journals Special Issue “Applications of Finite Element Modeling for Mechanical and Mechatronic Systems”

2021 ◽  
Vol 11 (11) ◽  
pp. 5170
Author(s):  
Marek Krawczuk ◽  
Magdalena Palacz
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Modeling ◽  
Engineering Practice ◽  
The Finite Element Method ◽  
Special Issue ◽  
Mechatronic Systems ◽  
Modeling And Analysis ◽  
Modern Engineering ◽  
Concise Description

Modern engineering practice requires advanced numerical modeling because, among other things, it reduces the costs associated with prototyping or predicting the occurrence of potentially dangerous situations during operation in certain defined conditions. Different methods have so far been used to implement the real structure into the numerical version. The most popular have been variations of the finite element method (FEM). The aim of this Special Issue has been to familiarize the reader with the latest applications of the FEM for the modeling and analysis of diverse mechanical problems. Authors are encouraged to provide a concise description of the specific application or a potential application of the Special Issue.

Sign in / Sign up

Export Citation Format

Share Document