scholarly journals Analysis of fluid substitution in a porous and fractured medium

Geophysics ◽  
2011 ◽  
Vol 76 (3) ◽  
pp. WA157-WA166 ◽  
Author(s):  
Samik Sil ◽  
Mrinal K. Sen ◽  
Boris Gurevich
Keyword(s):  
Water Saturation ◽  
Transversely Isotropic ◽  
P Wave ◽  
Reflection Coefficients ◽  
Fluid Substitution ◽  
Fracture Density ◽  
Maximum Increase ◽  
Amplitude Variation With Offset ◽  
Fractured Medium ◽  
Medium Change

To improve quantitative interpretation of seismic data, we analyze the effect of fluid substitution in a porous and fractured medium on elastic properties and reflection coefficients. This analysis uses closed-form expressions suitable for fluid substitution in transversely isotropic media with a horizontal symmetry axis (HTI). For the HTI medium, the effect of changing porosity and water saturation on (1) P-wave moduli, (2) horizontal and vertical velocities, (3) anisotropic parameters, and (4) reflection coefficients are examined. The effects of fracture density on these four parameters are also studied. For the model used in this study, a 35% increase in porosity lowers the value of P-wave moduli by maximum of 45%. Consistent with the reduction in P-wave moduli, P-wave velocities also decrease by maximum of 17% with a similar increment in porosity. The reduction is always larger for the horizontal P-wave modulus than for the vertical one and is nearly independent of fracture density. The magnitude of the anisotropic parameters of the fractured medium also changes with increased porosity depending on the changes in the value of P-wave moduli. The reflection coefficients at an interface of the fractured medium with an isotropic medium change in accordance with the above observations and lead to an increase in anisotropic amplitude variation with offset (AVO) gradient with porosity. Additionally, we observe a maximum increase in P-wave modulus and velocity by 30% and 8%, respectively, with a 100% increase in water saturation. Water saturation also changes the anisotropic parameters and reflection coefficients. Increase in water saturation considerably increases the magnitude of the anisotropic AVO gradient irrespective of fracture density. From this study, we conclude that porosity and water saturation have a significant impact on the four studied parameters and the impacts are seismically detectable.

Multiazimuthal modeling and inversion of qP reflection coefficients in fractured media

Geophysics ◽  
1999 ◽  
Vol 64 (4) ◽  
pp. 1143-1152 ◽  
Author(s):  
Ivan A. Simões‐Filho ◽  
Fernando A. Neves ◽  
Júlio S. Tinen ◽  
João S. Protázio ◽  
Jessé C. Costa
Keyword(s):  
Isotropic Medium ◽  
Model Space ◽  
Transversely Isotropic ◽  
Reservoir Rock ◽  
Reflection Coefficients ◽  
Fracture Density ◽  
Amplitude Variation ◽  
Amplitude Variation With Offset ◽  
The Difference ◽  
And Inversion

We present a method for the exact modeling and inversion of multiazimuthal qP-wave reflection coefficients at an interface separating two anisotropic media. This procedure can be used for media with at least one of its planes of symmetry parallel to the interface (i.e., monoclinic or higher symmetries). To illustrate the method, we compute qP-wave reflection coefficients at an interface separating an isotropic medium (representing a seal rock) from a transversely isotropic medium (representing a reservoir rock with vertical aligned fractures). Forward modeling shows that the difference in the offset of the critical angles for different azimuths is proportional to the fracture density: the higher the fracture density, the larger the difference. In the second part of the paper, we use a global optimization technique (genetic algorithm) to invert wide‐angle amplitude variation with offset (AVO) synthetic data. The model space consists of mass density and five elastic parameters of a transversely isotropic medium with a horizontal symmetry axis (HTI medium), which, to the first order, represents the fractured reservoir rock. For this model, we find that the configuration of three azimuths of data acquisition is the minimum number of acquisition planes needed to invert amplitude variation with offset/amplitude variation with azimuth (AVO/AVA) data. Further, there is a need for incidence angles up to 40°; a more narrow range of angles can lead to models that fit the data perfectly only up to the “maximum” incidence angle. We assume that the velocities and density of the isotropic rock are known, but use no prior information on the values of the model space parameters of the fractured rock except for reasonable velocity values in crustal rocks and constraints of elastic stability of solid media. After inversion for the model space parameters, we compute statistics of the 30 best models and likelihood functions, which provide information on the nonuniqueness and quality of the AVO/AVA inverse problem.

scholarly journals Seismic AVOA Inversion for Weak Anisotropy Parameters and Fracture Density in a Monoclinic Medium

2020 ◽  
Vol 10 (15) ◽  
pp. 5136 ◽  
Author(s):  
Zijian Ge ◽  
Shulin Pan ◽  
Jingye Li
Keyword(s):  
Fractured Rock ◽  
Synthetic Data ◽  
Transversely Isotropic ◽  
P Wave ◽  
Inversion Method ◽  
Fracture Density ◽  
Weak Anisotropy ◽  
Amplitude Versus Offset ◽  
Porosity And Permeability ◽  
Transverse Isotropic

In shale gas development, fracture density is an important lithologic parameter to properly characterize reservoir reconstruction, establish a fracturing scheme, and calculate porosity and permeability. The traditional methods usually assume that the fracture reservoir is one set of aligned vertical fractures, embedded in an isotropic background, and estimate some alternative parameters associated with fracture density. Thus, the low accuracy caused by this simplified model, and the intrinsic errors caused by the indirect substitution, affect the estimation of fracture density. In this paper, the fractured rock of monoclinic symmetry assumes two non-orthogonal vertical fracture sets, embedded in a transversely isotropic background. Firstly, assuming that the fracture radius, width, and orientation are known, a new form of P-wave reflection coefficient, in terms of weak anisotropy (WA) parameters and fracture density, was obtained by substituting the stiffness coefficients of vertical transverse isotropic (VTI) background, normal, and tangential fracture compliances. Then, a linear amplitude versus offset and azimuth (AVOA) inversion method, of WA parameters and fracture density, was constructed by using Bayesian theory. Tests on synthetic data showed that WA parameters, and fracture density, are stably estimated in the case of seismic data containing a moderate noise, which can provide a reliable tool in fracture prediction.

Amplitude variation with offset inversion using acoustic-elastic local solver

Geophysics ◽  
2020 ◽  
Vol 85 (3) ◽  
pp. R251-R262 ◽  
Author(s):  
Ligia Elena Jaimes-Osorio ◽  
Alison Malcolm ◽  
Ali Gholami
Keyword(s):  
Elastic Material ◽  
Point Sources ◽  
P Wave ◽  
Reflection Coefficients ◽  
Local Domain ◽  
Amplitude Variation ◽  
Amplitude Variation With Offset ◽  
Zoeppritz Equations ◽  
Avo Inversion ◽  
Full Domain

Conventional amplitude variation with offset (AVO) inversion analysis uses the Zoeppritz equations, which are based on a plane-wave approximation. However, because real seismic data are created by point sources, wave reflections are better modeled by spherical waves than by plane waves. Indeed, spherical reflection coefficients deviate from planar reflection coefficients near the critical and postcritical angles, which implies that the Zoeppritz equations are not applicable for angles close to critical reflection in AVO analysis. Elastic finite-difference simulations provide a solution to the limitations of the Zoeppritz approximation because they can handle near- and postcritical reflections. We have used a coupled acoustic-elastic local solver that approximates the wavefield with high accuracy within a locally perturbed elastic subdomain of the acoustic full domain. Using this acoustic-elastic local solver, the local wavefield generation and inversion are much faster than performing a full-domain elastic inversion. We use this technique to model wavefields and to demonstrate that the amplitude from within the local domain can be used as a constraint in the inversion to recover elastic material properties. Then, we focus on understanding how much the amplitude and phase contribute to the reconstruction accuracy of the elastic material parameters ([Formula: see text], [Formula: see text], and [Formula: see text]). Our results suggest that the combination of amplitude and phase in the inversion helps with the convergence. Finally, we analyze elastic parameter trade-offs in AVO inversion, from which we find that to recover accurate P-wave velocities we should invert for [Formula: see text] and [Formula: see text] simultaneously with fixed density.

Effects of fractures on NMO velocities and P‐wave azimuthal AVO response

Geophysics ◽  
2002 ◽  
Vol 67 (3) ◽  
pp. 711-726 ◽  
Author(s):  
Feng Shen ◽  
Xiang Zhu ◽  
M. Nafi Toksöz
Keyword(s):  
Aspect Ratio ◽  
Fractured Reservoirs ◽  
Crack Density ◽  
P Wave ◽  
Fractured Reservoir ◽  
Fracture Density ◽  
Fracture Detection ◽  
Fluid Content ◽  
Fracture Parameters ◽  
Fractured Medium

This paper attempts to explain the relationships between fractured medium properties and seismic signatures and distortions induced by geology‐related influences on azimuthal AVO responses. In the presence of vertically aligned fractures, the relationships between fracture parameters (fracture density, fracture aspect ratio, and saturated fluid content) and their seismic signatures are linked with rock physics models of fractured media. The P‐wave seismic signatures studied in this paper include anisotropic parameters (δ(v), (v), and γ(v)), NMO velocities, and azimuthal AVO responses, where δ(v) is responsible for near‐vertical P‐wave velocity variations, (v) defines P‐wave anisotropy, and γ(v) governs the degree of shearwave splitting. The results show that in gas‐saturated fractures, anisotropic parameters δ(v) and (v) vary with fracture density alone. However, in water‐saturated fractures δ(v) and (v) depend on fracture density and crack aspect ratio and are also related to Vp/VS and Vp of background rocks, respectively. Differing from δ(v) and (v), γ(v) is the parameter most related to crack density. It is insensitive to the saturated fluid content and crack aspect ratio. The P‐wave NMO velocities in horizontally layered media are a function of δ(v), and their properties are comparable with those of δ(v). Results from 3‐D finite‐difference modeling show that P‐wave azimuthal AVO variations do not necessarily correlate with the magnitude of fracture density. Our studies reveal that, in addition to Poisson's ratio, other elastic properties of background rocks have an effect on P‐wave azimuthal AVO variations. Varying the saturated fluid content of fractures can lead to azimuthal AVO variations and may greatly change azimuthal AVO responses. For a thin fractured reservoir, a tuning effect related to seismic wavelength and reservoir thickness can result in variations in AVO gradients and in azimuthal AVO variations. Results from instantaneous frequency and instantaneous bandwidth indicate that tuning can also lead to azimuthal variations in the rates of changes of the phase and amplitude of seismic waves. For very thin fractured reservoirs, the effect of tuning could become dominant. Our numerical results show that AVO gradients may be significantly distorted in the presence of overburden anisotropy, which suggests that the inversion of fracture parameters based on an individual AVO response would be biased unless this influence were corrected. Though P‐wave azimuthal AVO variations could be useful for fracture detection, the combination of other types of data is more beneficial than using P‐wave amplitude signatures alone, especially for the quantitative characterization of a fractured reservoir.

Upscaling in orthorhombic media: Behavior of elastic parameters in heterogeneous fractured earth

Geophysics ◽  
2016 ◽  
Vol 81 (3) ◽  
pp. C113-C126 ◽  
Author(s):  
Yuriy Ivanov ◽  
Alexey Stovas
Keyword(s):  
Seismic Waves ◽  
Homogeneous Medium ◽  
Transversely Isotropic ◽  
Processing Parameters ◽  
P Wave ◽  
Orthorhombic Symmetry ◽  
Weak Anisotropy ◽  
Fluid Saturation ◽  
Fractured Medium ◽  
Anisotropic Layers

A stack of horizontal homogeneous elastic arbitrary anisotropic layers in welded contact in the long-wavelength limit is equivalent to an elastic anisotropic homogeneous medium. Such a medium is characterized by an effective average description adhering to previously derived closed-form formalism. We have used this formalism to study three different inhomogeneous orthorhombic (ORT) models that could represent real geologic scenarios. We have determined that a stack of thin orthorhombic layers with arbitrary azimuths of vertical symmetry planes can be approximated by an effective orthorhombic medium. The most suitable approach for this is to minimize the misfit between the effective anisotropic medium, monoclinic in that case, and the desirable orthorhombic medium. The second model is an interbedding of VTI (transversely isotropic with a vertical symmetry axis) layers with the same layers containing vertical fractures (shales are intrinsically anisotropic and often fractured). We have derived a weak-anisotropy approximation for important P-wave processing parameters as a function of the relative amount of the fractured lithology. To accurately characterize fractures, inversion for the fracture parameters should use a priori information on the relative amount of a fractured medium. However, we have determined that the cracks’ fluid saturation can be estimated without prior knowledge of the relative amount of the fractured layer. We have used field well-log data to demonstrate how fractures can be included in the interval of interest during upscaling. Finally, the third model that we have considered is a useful representation of tilted orthorhombic medium in the case of two-way propagation of seismic waves through it. We have derived a weak anisotropy approximation for traveltime parameters of the reflected P-wave that propagates through a stack of thin beds of tilted orthorhombic symmetry. The tilt of symmetry planes in an orthorhombic medium significantly affects the kinematics of the reflected P-wave and should be properly accounted for to avoid mispositioning of geologic structures in seismic imaging.

Effects of transverse isotropy on P‐wave AVO for gas sands

Geophysics ◽  
1993 ◽  
Vol 58 (6) ◽  
pp. 883-888 ◽  
Author(s):  
Ki Young Kim ◽  
Keith H. Wrolstad ◽  
Fred Aminzadeh
Keyword(s):  
Transverse Isotropy ◽  
Transversely Isotropic ◽  
P Wave ◽  
Amplitude Variation ◽  
Amplitude Variation With Offset ◽  
Velocity Anisotropy ◽  
Special Cases ◽  
Class 1 ◽  
Zero Offset ◽  
Ti Media

Velocity anisotropy should be taken into account when analyzing the amplitude variation with offset (AVO) response of gas sands encased in shales. The anisotropic effects on the AVO of gas sands in transversely isotropic (TI) media are reviewed. Reflection coefficients in TI media are computed using a planewave formula based on ray theory. We present results of modeling special cases of exploration interest having positive reflectivity, near‐zero reflectivity, and negative reflectivity. The AVO reflectivity in anisotropic media can be decomposed into two parts; one for isotropy and the other for anisotropy. Zero‐offset reflectivity and Poisson’s ratio contrast are the most significant parameters for the isotropic component while the δ difference (Δδ) between shale and gas sand is the most important factor for the anisotropic component. For typical values of Tl anisotropy in shale (positive δ and ε), both δ difference (Δδ) and ε difference (Δε) amplify AVO effects. For small angles of incidence, Δδ plays an important role in AVO while Δε dominates for large angles of incidence. For typical values of δ and ε, the effects of anisotropy in shale are: (1) a more rapid increase in AVO for Class 3 and Class 2 gas sands, (2) a more rapid decrease in AVO for Class 1 gas sands, and (3) a shift in the offset of polarity reversal for some Class 1 and Class 2 gas sands.

Exact elastic impedance matrices for transversely isotropic medium

Geophysics ◽  
2016 ◽  
Vol 81 (2) ◽  
pp. C1-C15 ◽  
Author(s):  
Feng Zhang ◽  
Xiang-Yang Li
Keyword(s):  
Shale Gas ◽  
Isotropic Medium ◽  
Seismic Reflection ◽  
Transversely Isotropic ◽  
Seismic Inversion ◽  
P Wave ◽  
Reflection Coefficients ◽  
Angle Of Incidence ◽  
Transversely Isotropic Medium ◽  
Anisotropy Parameters

Conventional elastic impedances are derived as scalars by means of the integration of reflectivity. In this sense, they are attributes of the seismic reflection but not the intrinsic physical property of the subsurface media. The derivation of these expressions shares the same assumptions as the reflectivity approximations, such as weak impedance contrast, small angle of incidence, or weak anisotropic media, and thus it limits the accuracy and interpretation capability. The exact P/SV impedance matrices relating the stress and strain represent the mechanical property of the subsurface media and yield reflection coefficients at an arbitrary angle of incidence. We have extended the impedance matrices to a transversely isotropic medium. The resulting elastic impedances (stress/velocity ratios) can be used to characterize those unconventional reservoir formations with strong seismic anisotropy, such as shale-gas and coal-bed methane. Our numerical analyses determined their variations with the phase angle and anisotropy parameters. The exact expressions of the P- and S-wave elastic impedances are used to model the seismic reflection coefficients, and thus they can be inverted simultaneously if all of the types of reflection waves are available. We then derive approximations of quasi-P-wave elastic impedances for seismic inversion of anisotropy parameters and further interpretation. Our applications on real logs and seismic data for a turbidite fan reservoir and a shale-gas reservoir determined the robust interpretation capability of derived elastic impedances in lithology characterizations.

P‐wave reflection coefficients for transversely isotropic models with vertical and horizontal axis of symmetry

Geophysics ◽  
1997 ◽  
Vol 62 (3) ◽  
pp. 713-722 ◽  
Author(s):  
Andreas Rüger
Keyword(s):  
Reflection Coefficient ◽  
Wave Reflection ◽  
Numerical Solutions ◽  
Anisotropy Parameter ◽  
Transversely Isotropic ◽  
Horizontal Axis ◽  
P Wave ◽  
Reflection Coefficients ◽  
Gradient Term ◽  
Axis Of Symmetry

The study of P‐wave reflection coefficients in anisotropic media is important for amplitude variation with offset (AVO) analysis. While numerical evaluation of the reflection coefficient is straightforward, numerical solutions do not provide analytic insight into the influence of anisotropy on the AVO signature. To overcome this difficulty, I present an improved approximation for P‐wave reflection coefficients at a horizontal boundary in transversely isotropic media with vertical axis of symmetry (VTI media). This solution has the same AVO‐gradient term describing the low‐order angular variation of the reflection coefficient as the equations published previously, but is more accurate for large incidence angles. The refined approximation is then extended to transverse isotropy with a horizontal axis of symmetry (HTI), which is caused typically by a system of vertical cracks. Comparison of the approximate reflection coefficients for P‐waves incident in the two vertical symmetry planes of HTI media indicates that the azimuthal variation of the AVO gradient is a function of the shear‐wave splitting parameter γ, and the anisotropy parameter describing P‐wave anisotropy for nearvertical propagation in the vertical plane containing the symmetry axis.

Sign in / Sign up

Export Citation Format

Share Document