Feasibility of time-lapse gravity and gravity gradiometry monitoring for steam-assisted gravity drainage reservoirs

Geophysics ◽  
2015 ◽  
Vol 80 (2) ◽  
pp. WA99-WA111 ◽  
Author(s):  
Anya Reitz ◽  
Richard Krahenbuhl ◽  
Yaoguo Li
Keyword(s):  
Heavy Oil ◽  
Production Efficiency ◽  
Low Cost ◽  
Time Lapse ◽  
Gravity Drainage ◽  
Great Success ◽  
Gravity Gradiometry ◽  
Steam Chamber ◽  
Steam Assisted Gravity Drainage ◽  
The Cost

There is presently an increased need to monitor production efficiency as heavy oil reservoirs become more economically viable. We present a feasibility study of monitoring steam-assisted gravity drainage (SAGD) reservoirs using time-lapse gravimetry and gravity gradiometry. Even though time-lapse seismic has historically shown great success for SAGD monitoring, the gravimetry and gravity gradiometry methods offer a low-cost interseismic alternative that can complement the seismic method, increase the survey frequency, and decrease the cost of monitoring. In addition, both gravity-based methods are directly sensitive to the density changes that occur as a result of the replacement of heavy oil by steam. Advances in technologies have made both methods viable candidates for consideration in time-lapse reservoir monitoring, and we have numerically evaluated their potential application in monitoring SAGD production. The results indicate that SAGD production should produce a strong anomaly for both methods at typical SAGD reservoir depths. However, the level of detail for steam-chamber geometries and separations that can be recovered from the gravimetry and gravity gradiometry data is site dependent. Gravity gradiometry shows improved monitoring ability, such as better recovery of nonuniform steam movement due to reservoir heterogeneity, at shallower production reservoirs. Gravimetry has the ability to detect SAGD steam-chamber growth to greater depths than does gravity gradiometry, although with decreasing resolution of the expanding steam chambers.

scholarly journals Expansion Velocity Model of Steam-Assisted Gravity Drainage considering Thermal Convection

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Dian-Fa Du ◽  
Yao-Zu Zhang ◽  
Li-Na Zhang ◽  
Meng-Ran Xu ◽  
Xin Liu
Keyword(s):  
Heat Transfer ◽  
Heat Capacity ◽  
Heavy Oil ◽  
Heat Convection ◽  
Gravity Drainage ◽  
Steam Chamber ◽  
Steam Assisted Gravity Drainage ◽  
Expansion Speed ◽  
Actual Field ◽  
Horizontal Expansion

Steam-assisted gravity drainage (SAGD) is an important method used in the development of heavy oil. A heat transfer model in the SAGD production process is established based on the heat transfer effect caused by the temperature difference at the front edge of the steam chamber and the heat convection effect caused by the pressure difference. The observation well temperature method is used in this model to calculate the horizontal expansion speed of the steam chamber. In this manner, an expansion speed model considering heat convection and heat conduction is established for a steam chamber with a steam-assisted gravity drainage system. By comparing this with the production data extracted from the Fengcheng Oilfield target block, it is verified that the model can be effectively applied for actual field development. Simultaneously, by using the derived model, the temperature distribution at the edge of the steam chamber and production forecast can be predicted. Sensitivity analysis of the expansion rate of the steam chamber demonstrates that the larger the thermal conductivity, the faster is the steam chamber horizontal expansion speed, and the two are positively correlated; the larger the reservoir heat capacity, the slower is the steam chamber horizontal expansion speed. A larger heat capacity of the convective liquid indicates that there are more water components in the convective liquid, the viscosity of the convective liquid is low, and the expansion speed of the steam chamber increases accordingly. This research closely integrates theory with actual field production and provides theoretical support for the development of heavy oil reservoirs.

Mathematical Modeling of Steam Assisted Gravity Drainage

2005 ◽  
Vol 8 (05) ◽  
pp. 372-376 ◽  
Author(s):  
Serhat Akin
Keyword(s):  
Mathematical Model ◽  
Heavy Oil ◽  
Steam Injection ◽  
Viscosity Reduction ◽  
Gravity Drainage ◽  
Heavy Oils ◽  
Production Well ◽  
Steam Chamber ◽  
Steam Assisted Gravity Drainage ◽  
Wide Range

Summary A mathematical model for gravity drainage in heavy-oil reservoirs and tar sands during steam injection in linear geometry is proposed. The mathematical model is based on the experimental observations that the steam-zone shape is an inverted triangle with the vertex fixed at the bottom production well. Both temperature and asphaltene content dependence on the viscosity of the drained heavy oil are considered. The developed model has been validated with experimental data presented in the literature. The heavy-oil production rate conforms well to previously published data covering a wide range of heavy oils and sands for gravity drainage. Introduction Gravity drainage of heavy oils is of considerable interest to the oil industry. Because heavy oils are very viscous and, thus, almost immobile, a recovery mechanism is required that lowers the viscosity of the material to the point at which it can flow easily to a production well. Conventional thermal processes, such as cyclic steam injection and steam-assisted gravity drainage(SAGD), are based on thermal viscosity reduction. Cyclic steam injection incorporates a drive enhancement from thermal expansion. On the other hand, SAGD is based on horizontal wells and maximizing the use of gravity forces. In the ideal SAGD process, a growing steam chamber forms around the horizontal injector, and steam flows continuously to the perimeter of the chamber, where it condenses and heats the surrounding oil. Effective initial heating of the cold oil is important for the formation of the steam chamber in gravity-drainage processes. Heat is transferred by conduction, by convection, and by the latent heat of steam. The heated oil drains to a horizontal production well located at the base of the reservoir just below the injection well. Based on the aforementioned concepts, Butler et al. derived Eq. 1 assuming that the steam pressure is constant in the steam chamber, that only steam flows in the steam chamber, that oil saturation is residual, and that heat transfer ahead of the steam chamber to cold oil is only by conduction. One physical analogy of this process is that of a reservoir in which an electric heating element is placed horizontally above a parallel horizontal producing well.

scholarly journals Identifying Reservoir Features via iSOR Response Behaviour

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 427
Author(s):  
Jingyi Wang ◽  
Ian Gates
Keyword(s):  
Oil Sands ◽  
Gravity Drainage ◽  
Athabasca Oil Sands ◽  
Steam Chamber ◽  
Heterogeneous Reservoirs ◽  
Steam Assisted Gravity Drainage ◽  
Response Behaviour

To extract viscous bitumen from oil sands reservoirs, steam is injected into the formation to lower the bitumen’s viscosity enabling sufficient mobility for its production to the surface. Steam-assisted gravity drainage (SAGD) is the preferred process for Athabasca oil sands reservoirs but its performance suffers in heterogeneous reservoirs leading to an elevated steam-to-oil ratio (SOR) above that which would be observed in a clean oil sands reservoir. This implies that the SOR could be used as a signature to understand the nature of heterogeneities or other features in reservoirs. In the research reported here, the use of the SOR as a signal to provide information on the heterogeneity of the reservoir is explored. The analysis conducted on prototypical reservoirs reveals that the instantaneous SOR (iSOR) can be used to identify reservoir features. The results show that the iSOR profile exhibits specific signatures that can be used to identify when the steam chamber reaches the top of the formation, a lean zone, a top gas zone, and shale layers.

scholarly journals A steam rising model of steam-assisted gravity drainage production for heavy oil reservoirs

2019 ◽  
Vol 38 (4) ◽  
pp. 801-818
Author(s):  
Ren-Shi Nie ◽  
Yi-Min Wang ◽  
Yi-Li Kang ◽  
Yong-Lu Jia
Keyword(s):  
Production Rate ◽  
Horizontal Well ◽  
Oil Production ◽  
Steam Injection ◽  
Injection Rate ◽  
Gravity Drainage ◽  
Model Parameters ◽  
Steam Quality ◽  
Steam Chamber ◽  
Steam Assisted Gravity Drainage

The steam chamber rising process is an essential feature of steam-assisted gravity drainage. The development of a steam chamber and its production capabilities have been the focus of various studies. In this paper, a new analytical model is proposed that mimics the steam chamber development and predicts the oil production rate during the steam chamber rising stage. The steam chamber was assumed to have a circular geometry relative to a plane. The model includes determining the relation between the steam chamber development and the production capability. The daily oil production, steam oil ratio, and rising height of the steam chamber curves influenced by different model parameters were drawn. In addition, the curve sensitivities to different model parameters were thoroughly considered. The findings are as follows: The daily oil production increases with the steam injection rate, the steam quality, and the degree of utilization of a horizontal well. In addition, the steam oil ratio decreases with the steam quality and the degree of utilization of a horizontal well. Finally, the rising height of the steam chamber increases with the steam injection rate and steam quality, but decreases with the horizontal well length. The steam chamber rising rate, the location of the steam chamber interface, the rising time, and the daily oil production at a certain steam injection rate were also predicted. An example application showed that the proposed model is able to predict the oil production rate and describe the steam chamber development during the steam chamber rising stage.

Approximate Physics-Discrete Simulation of the Steam-Chamber Evolution in Steam-Assisted Gravity Drainage

SPE Journal ◽  
2018 ◽  
Vol 24 (02) ◽  
pp. 477-491 ◽  
Author(s):  
Enrique Gallardo ◽  
Clayton V. Deutsch
Keyword(s):  
Oil Sands ◽  
Recovery Process ◽  
Thermal Recovery ◽  
Porous Media Flow ◽  
Gravity Drainage ◽  
Discrete Simulation ◽  
Flow Equations ◽  
Integrity Assessment ◽  
Steam Chamber ◽  
Steam Assisted Gravity Drainage

Summary Steam-assisted gravity drainage (SAGD) is a thermal-recovery process to produce bitumen from oil sands. In this technology, steam injected in the reservoir creates a constantly evolving steam chamber while heated bitumen drains to a production well. Understanding the geometry and the rate of growth of the steam chamber is necessary to manage an economically successful SAGD project. This work introduces an approximate physics-discrete simulator (APDS) to model the steam-chamber evolution. The algorithm is formulated and implemented using graph theory, simplified porous-media flow equations, heat-transfer concepts, and ideas from discrete simulation. The APDS predicts the steam-chamber evolution in heterogeneous reservoirs and is computationally efficient enough to be applied over multiple geostatistical realizations to support decisions in the presence of geological uncertainty. The APDS is expected to be useful for selecting well-pair locations and operational strategies, 4D-seismic integration in SAGD-reservoir characterization, and caprock-integrity assessment.

Sign in / Sign up

Export Citation Format

Share Document