The SMART I Accelerograph Array (1980-1987): A Review

1987 ◽  
Vol 3 (2) ◽  
pp. 263-287 ◽  
Author(s):  
N. A. Abrahamson ◽  
B. A. Bolt ◽  
R. B. Darragh ◽  
J. Penzien ◽  
Y. B. Tsai
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Ground Motions ◽  
Near Field ◽  
Strong Motion ◽  
Response Spectra ◽  
Transform Faults ◽  
Engineering Research ◽  
Motion Data ◽  
Time Histories

SMART 1 is the first large digital array of strong-motion seismographs specially designed for engineering and seismological studies of the generation and near-field properties of earthquakes. Since the array began operation in September 1980, it has recorded over 3000 accelerogram traces from 48 earthquakes ranging in local magnitude ( ML) from 3.6 to 7.0. Peak ground accelerations have been recorded up to 0.33g and 0.34g on the horizontal and vertical components, respectively. Epicentral distances have ranged from 3 km 200 km from the array center, and focal depths have ranged from shallow to 100 km. The recorded earthquakes had both reverse and strike-slip focal mechanisms associated with the subduction zone and transform faults. These high quality, digital, ground motions provide a varied resource for earthquake engineering research. Earthquake engineering studies of the SMART 1 ground motion data have led to advances in knowledge in several cases: for example, on frequency-dependent incoherency of free-surface ground motions over short distances, on response of linear systems to multiple support excitations, on attenuation of peak ground-motion parameters and response spectra, on site torsion and phasing effects, and on the identification of wave types. Accelerograms from individual strong-motion seismographs do not, in general, provide such information. This review describes the SMART 1 array and the recorded earthquakes with special engineering applications. Also, it tabulates the unfiltered peak array accelerations, displays some of the recorded ground motion time histories, and summarizes the main engineering research that has made use of SMART 1 data.

scholarly journals Selection of Compatible Ground Motions with the Seismic Characteristics of Erbil City, the Capital of the Kurdistan Region of Iraq

2020 ◽  
Vol 10 (1) ◽  
pp. 110-120
Author(s):  
Zina A. AbdulJaleel ◽  
Bahman O. Taha
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Risk Evaluation ◽  
Ground Motions ◽  
Imperial Valley ◽  
Engineering Research ◽  
Ground Motion Selection ◽  
Seismic Characteristics ◽  
Time Histories ◽  
Selection Of

Erbil city characterized by the risk of earthquakes generated by Zagros-Taurus Belt. The central objective of this study is to obtain a compatible input ground motion within the seismicity of Erbil city since which is considered an essential component of seismic risk evaluation and vulnerability studies. The real records obtained from the online database Pacific Earthquake Engineering Research Next Generation Attenuation. Four sets of ground motion selection and modification methods proposed to obtain fifteen records, where each record scaled and matched with the defined target spectra and seismic characteristics in Erbil city. Based on the greatest number of repetition and different events, ten compatible ground motions with earthquake name and NGA record number are selected: Gazli_Ussr (#126), Imperial Vally_06 (#183), El Mayor-Cucapah_Maxico (#5827), Christchurch_New Zealand (#8124), Imperial Valley (#6), Darfield_NewZealand (#6893), Duzce Turkey (#1602), Northridge_01 (#1082), Loma Prieta (#761), and Spitak_Armenia (#730). Seismosoft application utilized to obtain the graphs of acceleration, velocity, and displacement time histories for three components, in addition to determine the important parameters to characterize the amplitude, frequency content, and duration of the selected ground motion.

NGA-West2 Models for Ground Motion Directionality

2014 ◽  
Vol 30 (3) ◽  
pp. 1285-1300 ◽  
Author(s):  
Shrey K. Shahi ◽  
Jack W. Baker
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Hazard Analysis ◽  
Ground Motions ◽  
Response Spectra ◽  
Engineering Research ◽  
The Pacific ◽  
Horizontal Ground Motion ◽  
Motion Directionality ◽  
The Relationship

The NGA-West2 research program, coordinated by the Pacific Earthquake Engineering Research Center (PEER), is a major effort to produce refined models for predicting ground motion response spectra. This study presents new models for ground motion directionality developed as part of that project. Using a database of recorded ground motions, empirical models have been developed for a variety of quantities related to direction-dependent spectra. A model is proposed for the maximum spectral acceleration observed in any orientation of horizontal ground motion shaking ( Sa RotD100), which is formulated as a multiplicative factor to be coupled with the NGA-West2 models that predict the median spectral accelerations over all orientations ( Sa RotD50). Models are also proposed for the distribution of orientations of the Sa RotD100 value, relative to the fault and the relationship between Sa RotD100 orientations at differing periods. Discussion is provided regarding how these results can be applied to perform seismic hazard analysis and compute realistic target spectra conditioned on different parameters.

Behavior of CFST-RC Pier under Different Ground Motions

2018 ◽  
Vol 1145 ◽  
pp. 134-139
Author(s):  
Raghabendra Yadav ◽  
Bao Chun Chen ◽  
Hui Hui Yuan ◽  
Zhi Bin Lian
Keyword(s):  
Earthquake Engineering ◽  
Large Scale ◽  
Dynamic Testing ◽  
Ground Motions ◽  
Dynamic Test ◽  
Longitudinal Direction ◽  
Steel Tube ◽  
Engineering Research ◽  
Magnification Factors ◽  
Time Histories

The dynamic testing of large-scale structures continues to play a significant role in earthquake engineering research. The pseudo- dynamic test (PDT) is an experimental technique for simulating the earthquake response of structures and structural components in time domain. A CFST-RC pier is a modified form of CFST laced column in which CFST members are connected with RC web in longitudinal direction and with steel tube in transverse direction. For this study, a CFST -RC pier is tested under three different earthquake time histories having scaled PGA of 0.05g. From the experiment acceleration, velocity, displacement and load time histories are observed. The dynamic magnification factors for acceleration due to Chamoli, Gorkha and Wenchuan ground motions are observed as 12, 10 and 10 respectively. The frequency of the pier is found to be 1.42 Hz. The result shows that this type of pier has excellent static and earthquake resistant properties.

Engineering observations on ground motion at the Van Norman Complex after the 1994 Northridge earthquake

1996 ◽  
Vol 86 (1B) ◽  
pp. S333-S349 ◽  
Author(s):  
J. P. Bardet ◽  
C. Davis
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Low Frequency ◽  
Strong Motion ◽  
Response Spectra ◽  
Vertical Acceleration ◽  
Northridge Earthquake ◽  
Peak Acceleration ◽  
Geotechnical Earthquake Engineering ◽  
1994 Northridge Earthquake

Abstract During the 1994 Northridge earthquake, the Van Norman Complex yielded an unprecedented number of recordings with high acceleration, in the close proximity of the fault rupture. These strong-motion recordings exhibited the pulses of the main event. One station recorded the largest velocity ever instrumentally recorded (177 cm/sec), resulting from a 0.86 g peak acceleration with a low frequency. Throughout the complex, the horizontal accelerations reached peak values ranging from 0.56 to 1.0 g, except for the complex center, where the peak acceleration did not exceed 0.43 g. The vertical acceleration reached maximum peak values comparable with those of the horizontal acceleration. The acceleration response spectra in the longitudinal and transverse directions were significantly different. Such a difference, which is not yet well documented in the field of geotechnical earthquake engineering, indicates that the amplitude and frequency content of the ground motion was directionally dependent in the Van Norman Complex.

scholarly journals A Procedure to Select Earthquake Time Histories for Deterministic Seismic Hazard Analysis: Case Studies of Major Cities in Taiwan

2017 ◽  
Author(s):  
Duruo Huang ◽  
Wenqi Du
Keyword(s):  
Seismic Hazard ◽  
Ground Motion ◽  
Ground Surface ◽  
Strong Motion ◽  
Response Spectra ◽  
Dynamic Responses ◽  
Motion Time ◽  
Acceleration Time Histories ◽  
Time Histories ◽  
Deterministic Seismic Hazard

Abstract. In performance-based seismic design, ground-motion time histories are needed for analyzing dynamic responses of nonlinear structural systems. However, the number of strong-motion data at design level is often limited. In order to analyze seismic performance of structures, ground-motion time histories need to be either selected from recorded strong-motion database, or numerically simulated using stochastic approaches. In this paper, a detailed procedure to select proper acceleration time histories from the Next Generation Attenuation (NGA) database for several cities in Taiwan is presented. Target response spectra are initially determined based on a local ground motion prediction equation under representative deterministic seismic hazard analyses. Then several suites of ground motions are selected for these cities using the Design Ground Motion Library (DGML), a recently proposed interactive ground-motion selection tool. The selected time histories are representatives of the regional seismic hazard, and should be beneficial to earthquake studies when comprehensive seismic hazard assessments and site investigations are yet available. Note that this method is also applicable to site-specific motion selections with the target spectra near the ground surface considering the site effect.

NGA-West2 Research Project

2014 ◽  
Vol 30 (3) ◽  
pp. 973-987 ◽  
Author(s):  
Yousef Bozorgnia ◽  
Norman A. Abrahamson ◽  
Linda Al Atik ◽  
Timothy D. Ancheta ◽  
Gail M. Atkinson ◽  
...  
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Research Program ◽  
Epistemic Uncertainty ◽  
Response Spectra ◽  
Site Amplification ◽  
Earthquake Hazards ◽  
Research Project ◽  
Engineering Research ◽  
Crustal Earthquakes

The NGA-West2 project is a large multidisciplinary, multi-year research program on the Next Generation Attenuation (NGA) models for shallow crustal earthquakes in active tectonic regions. The research project has been coordinated by the Pacific Earthquake Engineering Research Center (PEER), with extensive technical interactions among many individuals and organizations. NGA-West2 addresses several key issues in ground-motion seismic hazard, including updating the NGA database for a magnitude range of 3.0–7.9; updating NGA ground-motion prediction equations (GMPEs) for the “average” horizontal component; scaling response spectra for damping values other than 5%; quantifying the effects of directivity and directionality for horizontal ground motion; resolving discrepancies between the NGA and the National Earthquake Hazards Reduction Program (NEHRP) site amplification factors; analysis of epistemic uncertainty for NGA GMPEs; and developing GMPEs for vertical ground motion. This paper presents an overview of the NGA-West2 research program and its subprojects.

Spatial Variability of Source and Attenuation Characteristics in Large Ground-Motion Datasets

2020 ◽  
Author(s):  
Sreeram Reddy Kotha ◽  
Graeme Weatherill ◽  
Dino Bindi ◽  
Fabrice Cotton
Keyword(s):  
Spatial Variability ◽  
Ground Motion ◽  
Ground Motions ◽  
Low Frequency ◽  
Strong Motion ◽  
Response Spectra ◽  
Large Datasets ◽  
Earthquake Scenarios ◽  
Crustal Earthquakes ◽  
Geographical Regions

<p>Ground-Motion Models (GMMs) characterize the random distributions of ground-motions for a combination of earthquake source, wave travel-path, and the effected site’s geological properties. Typically, GMMs are regressed over a compendium of strong ground-motion recordings collected from several earthquakes recorded at multiple sites scattered across a variety of geographical regions. The necessity of compiling such large datasets is to expand the range of magnitude, distance, and site-types; in order to regress a GMM capable of predicting realistic ground-motions for rare earthquake scenarios, e.g. large magnitudes at short distances from a reference rock site. The European Strong-Motion (ESM) dataset is one such compendium of observations from a few hundred shallow crustal earthquakes recorded at a several hundred seismic stations in Europe and Middle-East.</p><p>We developed new GMMs from the ESM dataset, capable of predicting both the response spectra and Fourier spectra in a broadband of periods and frequencies, respectively. However, given the clear tectonic and geological diversity of the data, possible regional and site-specific differences in observed ground-motions needed to be quantified; whilst also considering the possible contamination of data from outliers. Quantified regional differences indicate that high-frequency ground-motions attenuate faster with distance in Italy compared to the rest of Europe, as well as systematically weaker ground-motions from central Italian earthquakes. In addition, residual analyses evidence anisotropic attenuation of low frequency ground-motions, imitating the pattern of shear-wave energy radiation. With increasing spatial variability of ground-motion data, the GMM prediction variability apparently increases. Hence, robust mixed-effects regressions and residual analyses are employed to relax the ergodic assumption.</p><p>Large datasets, such as the ESM, NGA-West2, and from KiK-Net, provide ample opportunity to identify and evaluate the previously hypothesized event-to-event, region-to-region, and site-to-site differences in ground-motions. With the appropriate statistical methods, these variabilities can be quantified and applied in seismic hazard and risk predictions. We intend to present the new GMMs: their development, performance and applicability, prospective improvements and research needs.</p>

Strong motion accelerograph records from the 1993 Napierville earthquake

1995 ◽  
Vol 22 (1) ◽  
pp. 190-196
Author(s):  
René Tinawi ◽  
André Filiatrault ◽  
Pierre Léger
Keyword(s):  
Ground Motion ◽  
Energy Content ◽  
Strong Motion ◽  
Response Spectra ◽  
High Energy ◽  
Period Range ◽  
Attenuation Relationships ◽  
Acceleration Time Histories ◽  
Short Period ◽  
Time Histories

An earthquake of magnitude ML = 4.3 occurred near Napierville, Quebec, on November 16, 1993. An accelerograph at the liquefaction, storage, and regasification plant of Gaz Metropolitain in Montreal, about 55 km from the epicentre, recorded the ground motion. Although the maximum accelerations and velocities from this event are small, the acceleration time histories do confirm the high energy content in the very short period range. The recorded ground motion and corresponding absolute acceleration response spectra are presented and various attenuation relationships, proposed for eastern North America, are utilized to compare the measured and predicted ground motion parameters. Key words: Napierville earthquake, attenuation relationships, acceleration spectra, strong motion records.

scholarly journals Rupture model of the 1989 Loma Prieta earthquake from the inversion of strong-motion and broadband teleseismic data

1991 ◽  
Vol 81 (5) ◽  
pp. 1540-1572 ◽  
Author(s):  
David J. Wald ◽  
Donald V. Helmberger ◽  
Thomas H. Heaton
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Strong Motion ◽  
High Gain ◽  
Temporal And Spatial Distribution ◽  
Origin Time ◽  
Loma Prieta Earthquake ◽  
Motion Data ◽  
Teleseismic Data ◽  
Loma Prieta

Abstract We have used 24 broadband teleseismic and 48 components of local strong-motion velocity records of the 1989 Loma Prieta earthquake in a formal inversion to determine the temporal and spatial distribution of slip. Separate inversions of the teleseismic data (periods of 3 to 30 sec) or strong-motion data (periods of 1 to 5 sec) result in similar models. The data require bilateral rupture with relatively little slip in the region directly updip from the hypocenter. Slip is concentrated in two patches: one centered 6 km northwest of the hypocenter at a depth of 12 km and with a maximum slip of 350 cm, and the other centered about 5 km southeast of the hypocenter at a depth of 16 km and with a maximum slip of 460 cm. The bilateral nature of the rupture results in large amplitude ground motions at sites located along the fault strike, both to the northwest and the southeast. However, the northwestern patch has a larger moment and overall stress drop and is, consequently, the source of the largest ground motion velocities, consistent with the observed recordings. This bilateral rupture also produces relatively modest ground motion amplitudes directly updip from the hypocenter, which is in agreement with the velocity ground motions observed at Corralitos. There is clear evidence of a foreshock (magnitude between 3.5 and 5.0) or a slow rupture nucleation about 2 sec before the main part of the rupture; the origin time implied by strong-motion trigger times is systematically 2 sec later than the time predicted from the high-gain regional network data. The seismic moment obtained from either of the separate data sets or both sets combined is about 3.0 × 1026 dyne-cm and the potency is 0.95 km3.

Relations between MaxRotD50 and Some Horizontal Components of Ground-Motion Intensity Used in Practice

2021 ◽  
Author(s):  
Alan Poulos ◽  
Eduardo Miranda
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Ground Motions ◽  
Geometric Mean ◽  
The Other ◽  
Horizontal Projection ◽  
Site Class ◽  
Engineering Research ◽  
Natural Logarithm ◽  
Horizontal Ground Motion

ABSTRACT The most commonly used intensity measure of ground motion in earthquake engineering is the 5% damped spectral ordinate, which varies in different directions. Several different measures have been proposed over the years to combine the intensity of the two horizontal recorded ground motions to derive ground-motion models as well as for design purposes. This study provides the relation to seven previously used measures of horizontal ground motion with respect to a recently proposed orientation-independent measure of horizontal ground-motion intensity referred to as MaxRotD50. This new measure of horizontal intensity is defined as the median value of the maximum spectral ordinate of two orthogonal directions computed for all possible nonredundant orientations. The relations are computed using 5065 pairs of horizontal ground motions taken from the database of ground motions recorded in shallow crustal earthquakes in active tectonic regions developed as part of the Pacific Earthquake Engineering Research Center’s Next Generation Attenuation-West2 project. Empirically derived period-dependent relations are presented for three quantities that permit transforming any of the seven other definitions of horizontal ground-motion intensity to MaxRotD50, namely, (1) geometric mean of the ratio of MaxRotD50 to any of the seven other measures of intensities, (2) standard deviation of the natural logarithm of the ratio of MaxRotD50 to any of the seven other measures of intensities, and (3) the correlation between the natural logarithm of the ratio of MaxRotD50 to the other measures of intensities and the natural logarithm of the other measure of intensity. In addition, the influence of site class at the recording station, earthquake magnitude, and distance to the horizontal projection of the rupture is examined on the geometric mean of the ratio of MaxRotD50 to the median intensity of all nonredundant orientations (i.e., RotD50), showing negligible influence of site class and only a relatively small influence of magnitude and distance.

Sign in / Sign up

Export Citation Format

Share Document